Most V4L2 drivers store the v4l2_fh pointer in file->private_data. The
saa7164 instead stores the pointer to the driver-specific structure that
embeds the v4l2_fh. Switch to storing the v4l2_fh pointer itself to
standardize behaviour across drivers. This also prepares for future
refactoring that depends on v4l2_fh being stored in private_data.
This also fixes a bug in the vidioc_g_std() in saa7164-vbi.c that casts
the private_data void pointer to a saa7164_encoder_fh instead of a
saa7164_vbi_fh. The bug has no practical consequence as the two
structures are identical.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The wl1273 FM radio is on Arnd's unused driver list:
https://lore.kernel.org/lkml/a15bb180-401d-49ad-a212-0c81d613fbc8@app.fastmail.com/
remove the radio component itself.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When the file system is frozen in preparation for taking an LVM
snapshot, the journal is checkpointed and if the orphan_file feature
is enabled, and the orphan file is empty, we clear the orphan_present
feature flag. But if there are pending inodes that need to be removed
the orphan_present feature flag can't be cleared.
The problem comes if the block device is read-only. In that case, we
can't process the orphan inode list, so it is skipped in
ext4_orphan_cleanup(). But then in ext4_mark_recovery_complete(),
this results in the ext4 error "Orphan file not empty on read-only fs"
firing and the file system mount is aborted.
Fix this by clearing the needs_recovery flag in the block device is
read-only. We do this after the call to ext4_load_and_init-journal()
since there are some error checks need to be done in case the journal
needs to be replayed and the block device is read-only, or if the
block device containing the externa journal is read-only, etc.
Cc: stable@kernel.org
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1108271
Cc: stable@vger.kernel.org
Fixes: 02f310fcf4 ("ext4: Speedup ext4 orphan inode handling")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In some cases like small FSes with no meta_bg and where the resize
doesn't need extra gdt blocks as it can fit in the current one,
s_reserved_gdt_blocks is set as 0, which causes fsmap to emit a 0
length entry, which is incorrect.
$ mkfs.ext4 -b 65536 -O bigalloc /dev/sda 5G
$ mount /dev/sda /mnt/scratch
$ xfs_io -c "fsmap -d" /mnt/scartch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [128..255]: special 102:1 128
2: 253:48 [256..255]: special 102:2 0 <---- 0 len entry
3: 253:48 [256..383]: special 102:3 128
Fix this by adding a check for this case.
Cc: stable@kernel.org
Fixes: 0c9ec4beec ("ext4: support GETFSMAP ioctls")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/08781b796453a5770112aa96ad14c864fbf31935.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
With bigalloc enabled, the logic to report last extent has a bug since
we try to use cluster units instead of block units. This can cause an
issue where extra incorrect entries might be returned back to the
user. This was flagged by generic/365 with 64k bs and -O bigalloc.
** Details of issue **
The issue was noticed on 5G 64k blocksize FS with -O bigalloc which has
only 1 bg.
$ xfs_io -c "fsmap -d" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128 /* sb */
1: 253:48 [128..255]: special 102:1 128 /* gdt */
3: 253:48 [256..383]: special 102:3 128 /* block bitmap */
4: 253:48 [384..2303]: unknown 1920 /* flex bg empty space */
5: 253:48 [2304..2431]: special 102:4 128 /* inode bitmap */
6: 253:48 [2432..4351]: unknown 1920 /* flex bg empty space */
7: 253:48 [4352..6911]: inodes 2560
8: 253:48 [6912..538623]: unknown 531712
9: 253:48 [538624..10485759]: free space 9947136
The issue can be seen with:
$ xfs_io -c "fsmap -d 0 3" /mnt/scratch
0: 253:48 [0..127]: static fs metadata 128
1: 253:48 [384..2047]: unknown 1664
Only the first entry was expected to be returned but we get 2. This is
because:
ext4_getfsmap_datadev()
first_cluster, last_cluster = 0
...
info->gfi_last = true;
ext4_getfsmap_datadev_helper(sb, end_ag, last_cluster + 1, 0, info);
fsb = C2B(1) = 16
fslen = 0
...
/* Merge in any relevant extents from the meta_list */
list_for_each_entry_safe(p, tmp, &info->gfi_meta_list, fmr_list) {
...
// since fsb = 16, considers all metadata which starts before 16 blockno
iter 1: error = ext4_getfsmap_helper(sb, info, p); // p = sb (0,1), nop
info->gfi_next_fsblk = 1
iter 2: error = ext4_getfsmap_helper(sb, info, p); // p = gdt (1,2), nop
info->gfi_next_fsblk = 2
iter 3: error = ext4_getfsmap_helper(sb, info, p); // p = blk bitmap (2,3), nop
info->gfi_next_fsblk = 3
iter 4: error = ext4_getfsmap_helper(sb, info, p); // p = ino bitmap (18,19)
if (rec_blk > info->gfi_next_fsblk) { // (18 > 3)
// emits an extra entry ** BUG **
}
}
Fix this by directly calling ext4_getfsmap_datadev() with a dummy
record that has fmr_physical set to (end_fsb + 1) instead of
last_cluster + 1. By using the block instead of cluster we get the
correct behavior.
Replacing ext4_getfsmap_datadev_helper() with ext4_getfsmap_helper()
is okay since the gfi_lastfree and metadata checks in
ext4_getfsmap_datadev_helper() are anyways redundant when we only want
to emit the last allocated block of the range, as we have already
taken care of emitting metadata and any last free blocks.
Cc: stable@kernel.org
Reported-by: Disha Goel <disgoel@linux.ibm.com>
Fixes: 4a622e4d47 ("ext4: fix FS_IOC_GETFSMAP handling")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/e7472c8535c9c5ec10f425f495366864ea12c9da.1754377641.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This if branch is only jumping to 'out' which
is defined just after the branch itself.
Hence this is if-check is a no-op and can be removed.
Address-Coverity-ID: 1647981 ("Incorrect expression (IDENTICAL_BRANCHES)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://patch.msgid.link/20250721200902.1071-1-antonio@mandelbit.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The check for a fast symlink in the presence of only an
external xattr inode is incorrect. If a fast symlink does
not have an xattr block (i_file_acl == 0), but does have
an external xattr inode that increases inode i_blocks, then
the check for a fast symlink will incorrectly fail and
__ext4_iget()->ext4_ind_check_inode() will report the inode
is corrupt when it "validates" i_data[] on the next read:
# ln -s foo /mnt/tmp/bar
# setfattr -h -n trusted.test \
-v "$(yes | head -n 4000)" /mnt/tmp/bar
# umount /mnt/tmp
# mount /mnt/tmp
# ls -l /mnt/tmp
ls: cannot access '/mnt/tmp/bar': Structure needs cleaning
total 4
? l?????????? ? ? ? ? ? bar
# dmesg | tail -1
EXT4-fs error (device dm-8): __ext4_iget:5098:
inode #24578: block 7303014: comm ls: invalid block
(note that "block 7303014" = 0x6f6f66 = "foo" in LE order).
ext4_inode_is_fast_symlink() should check the superblock
EXT4_FEATURE_INCOMPAT_EA_INODE feature flag, not the inode
EXT4_EA_INODE_FL, since the latter is only set on the xattr
inode itself, and not on the inode that uses this xattr.
Cc: stable@vger.kernel.org
Fixes: fc82228a5e ("ext4: support fast symlinks from ext3 file systems")
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Reviewed-by: Li Dongyang <dongyangli@ddn.com>
Reviewed-by: Alex Zhuravlev <bzzz@whamcloud.com>
Reviewed-by: Oleg Drokin <green@whamcloud.com>
Reviewed-on: https://review.whamcloud.com/59879
Lustre-bug-id: https://jira.whamcloud.com/browse/LU-19121
Link: https://patch.msgid.link/20250717063709.757077-1-adilger@dilger.ca
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
IMA testing revealed that after an ext4 remount, file accesses triggered
full measurements even without modifications, instead of skipping as
expected when i_version is unchanged.
Debugging showed `SB_I_VERSION` was cleared in reconfigure_super() during
remount due to commit 1ff2030739 ("ext4: unconditionally enable the
i_version counter") removing the fix from commit 960e0ab63b ("ext4: fix
i_version handling on remount").
To rectify this, `SB_I_VERSION` is always set for `fc->sb_flags` in
ext4_init_fs_context(), instead of `sb->s_flags` in __ext4_fill_super(),
ensuring it persists across all mounts.
Cc: stable@kernel.org
Fixes: 1ff2030739 ("ext4: unconditionally enable the i_version counter")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-2-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Check a race where data disappears from the TCP socket after
TLS signaled that its ready to receive.
ok 6 global.data_steal
# RUN tls_basic.base_base ...
# OK tls_basic.base_base
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://lore.kernel.org/tFjq_kf7sWIG3A7CrCg_egb8CVsT_gsmHAK0_wxDPJXfIzxFAMxqmLwp3MlU5EHiet0AwwJldaaFdgyHpeIUCS-3m3llsmRzp9xIOBR4lAI=@syst3mfailure.io
Fixes: 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi says:
====================
net: airoha: Introduce NPU callbacks for wlan offloading
Similar to wired traffic, EN7581 SoC allows to offload traffic to/from
the MT76 wireless NIC configuring the NPU module via the Netfilter
flowtable. This series introduces the necessary NPU callback used by
the MT7996 driver in order to enable the offloading.
MT76 support has been posted as RFC in [0] in order to show how the
APIs are consumed.
====================
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-0-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read all NPU wlan IRQ lines from the NPU device-tree node.
NPU module fires wlan irq lines when the traffic to/from the WiFi NIC is
not hw accelerated (these interrupts will be consumed by the MT76 driver
in subsequent patches).
This is a preliminary patch to enable wlan flowtable offload for EN7581
SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-5-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce callbacks used by the MT76 driver to configure NPU SoC
interrupts. This is a preliminary patch to enable wlan flowtable
offload for EN7581 SoC with MT76 driver.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-4-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce wlan_send_msg() and wlan_get_msg() NPU wlan callbacks used
by the wlan driver (MT76) to initialize NPU module registers in order to
offload wireless-wired traffic.
This is a preliminary patch to enable wlan flowtable offload for EN7581
SoC with MT76 driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-3-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce wlan_init_reserved_memory callback used by MT76 driver during
NPU wlan offloading setup.
This is a preliminary patch to enable wlan flowtable offload for EN7581
SoC with MT76 driver.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-2-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document memory regions used by Airoha EN7581 NPU for wlan traffic
offloading. The brand new added memory regions do not introduce any
backward compatibility issues since they will be used just to offload
traffic to/from the MT76 wireless NIC and the MT76 probing will not fail
if these memory regions are not provide, it will just disable offloading
via the NPU module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250811-airoha-en7581-wlan-offlaod-v7-1-58823603bb4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Display `i_version` in `/proc/fs/ext4/sdx/options`, even though it's
default enabled. This aids users managing multi-version scenarios and
simplifies debugging.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250703073903.6952-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Jakub Kicinski says:
====================
selftests: drv-net: improve zerocopy tests
A few tweaks to the devmem test to make it more "NIPA-compatible".
We still need a fix to make sure that the test sets hds threshold
to 0. Taehee is presumably already/still working on that:
https://lore.kernel.org/20250702104249.1665034-1-ap420073@gmail.com
so I'm not including my version.
# ./tools/testing/selftests/drivers/net/hw/devmem.py
TAP version 13
1..3
ok 1 devmem.check_rx
ok 2 devmem.check_tx
ok 3 devmem.check_tx_chunks
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
====================
Link: https://patch.msgid.link/20250811231334.561137-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Device Under Test should always be the local system.
While the Rx test gets this right the Tx test is sending
from remote to local. So Tx of DMABUF memory happens on remote.
These tests never run in NIPA since we don't have a compatible
device so we haven't caught this.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a number of:
with bkg("socat ..LISTEN..", exit_wait=True)
uses in the tests. If whatever is supposed to send the traffic
fails we will get stuck in the bkg(). Try to kill the process
in case of exception, to avoid the long wait.
A specific example where this happens is the devmem Tx tests.
Reviewed-by: Joe Damato <joe@dama.to>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to use bracketed IPv6 addresses for socat.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The general expectations for network HW selftests is that they
will be run as root. sudo doesn't seem to work on NIPA VMs.
While it's probably something solvable in the setup I think we should
remove the sudos. devmem is the only networking test using sudo.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like neither IO_URING nor UDMABUF are enabled even tho
iou-zcrx.py and devmem.py (respectively) need those.
IO_URING gets enabled by default but UDMABUF is missing.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: improbe suspend/resume architecture
This series improves the stmmac suspend/resume architecture by
providing a couple of method hooks in struct plat_stmmacenet_data which
are called by core code, and thus are available for any of the
platform glue drivers, whether using a platform or PCI device.
As these methods are called by core code, we can also provide a simple
PM ops structure also in the core code for converted glue drivers to
use.
The remainder of the patches convert the various drivers.
====================
Link: https://patch.msgid.link/aJo7kvoub5voHOUQ@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert mediatek to use the resume() platform method rather than the
init() platform method as mediatek_dwmac_init() is only called from
the resume paths.
This will ensure that in a future commit, mediatek_dwmac_init() won't
be called when probing the main part of the stmmac driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1ulXcC-008grN-Hc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert stm32 to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the stmmac
simple PM ops structure.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1ulXc7-008grH-Dh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert rk to use the new suspend() and resume() methods rather than
implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the simmac
simple PM ops structure.
We can further simplify the driver as there is no need to track whether
the device was suspended, we only need to check whether the device is
wakeup capable in the resume method. This is because the resume method
will only be called after the suspend method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1ulXc2-008grB-9k@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert pci to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1ulXbx-008gr4-5H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert loongson to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the stmmac
simple PM ops structure.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1ulXbs-008gqy-16@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert intel to use the new suspend() and resume() methods rather
than implementing these in custom wrappers around the main driver's
suspend/resume methods. This allows this driver to use the stmmac
simple PM ops structure.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1ulXbm-008gqs-P9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add legacy hooks for the suspend() and resume() methods to forward
these calls to the init() and exit() methods when the platform code
hasn't populated the two former methods. This allows us to get rid
of stmmac_pltfr_suspend() and stmmac_pltfr_resume().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1ulXbh-008gql-LO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several drivers will want to make use of simple PM operations, so
provide these from the core driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1ulXbc-008gqf-GJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add suspend/resume platform operations, which, when populated, override
the init/exit platform operations when we suspend and resume. These
suspend()/resume() methods are called by core code, and thus are
designed to support any struct device, not just platform devices. This
allows them to be used by the PCI drivers we have.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1ulXbX-008gqZ-Bb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
selftest: af_unix: Enable -Wall and -Wflex-array-member-not-at-end.
This series fix 4 warnings caught by -Wall and
-Wflex-array-member-not-at-end.
====================
Link: https://patch.msgid.link/20250811215432.3379570-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wall and -Wflex-array-member-not-at-end caught some warnings that
will be fixed in later patches.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250811215432.3379570-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scm_rights.c has no problem in functionality, but when compiled with
-Wflex-array-member-not-at-end, it shows this warning:
scm_rights.c: In function ‘__send_fd’:
scm_rights.c:275:32: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
275 | struct cmsghdr cmsghdr;
| ^~~~~~~
Let's silence it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250811215432.3379570-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
scm_inq.c has no problem in functionality, but when compiled with
-Wflex-array-member-not-at-end, it shows this warning:
scm_inq.c:15:24: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
15 | struct cmsghdr cmsghdr;
| ^~~~~~~
Let's silence it.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250811215432.3379570-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
netconsole: reuse netpoll_parse_ip_addr in configfs helpers
This patchset refactors the IP address parsing logic in the netconsole
driver to eliminate code duplication and improve maintainability. The
changes centralize IPv4 and IPv6 address parsing into a single function
(netpoll_parse_ip_addr). For that, it needs to teach
netpoll_parse_ip_addr() to handle strings with newlines, which is the
type of string coming from configfs.
Background
The netconsole driver currently has duplicate IP address parsing logic
in both local_ip_store() and remote_ip_store() functions. This
duplication increases the risk of inconsistencies and makes the code
harder to maintain.
Benefits
* Reduced code duplication: ~40 lines of duplicate parsing logic
eliminated
* Improved robustness: Centralized parsing reduces the chance
of inconsistencies
* Easier to maintain: Code follow more the netdev way
v3: https://lore.kernel.org/20250723-netconsole_ref-v3-0-8be9b24e4a99@debian.org
v2: https://lore.kernel.org/20250721-netconsole_ref-v2-0-b42f1833565a@debian.org
v1: https://lore.kernel.org/20250718-netconsole_ref-v1-0-86ef253b7a7a@debian.org
====================
Link: https://patch.msgid.link/20250811-netconsole_ref-v4-0-9c510d8713a2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace manual IP address parsing with a call to netpoll_parse_ip_addr
in remote_ip_store(), simplifying the code and reducing the chance of
errors.
The error message got removed, since it is not a good practice to
pr_err() if used pass a wrong value in configfs.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace manual IP address parsing with a call to netpoll_parse_ip_addr
in local_ip_store(), simplifying the code and reducing the chance of
errors.
Also, remove the pr_err() if the user enters an invalid value in
configfs entries. pr_err() is not the best way to alert user that the
configuration is invalid.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current IP address parsing logic fails when the input string
contains a trailing newline character. This can occur when IP
addresses are provided through configfs, which contains newlines in
a const buffer.
Teach netpoll_parse_ip_addr() how to ignore newlines at the end of the
IPs. Also, simplify the code by:
* No need to check for separators. Try to parse ipv4, if it fails try
ipv6 similarly to ceph_pton()
* If ipv6 is not supported, don't call in6_pton() at all.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250811-netconsole_ref-v4-2-9c510d8713a2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_parse_ip_addr() earlier in the file to be reused in
other functions, such as local_ip_store(). This avoids duplicate
address parsing logic and centralizes validation for both IPv4
and IPv6 string input.
No functional changes intended.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250811-netconsole_ref-v4-1-9c510d8713a2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
