Like many other platforms the sc7280 display clock controller provides
a couple of resets for the display subsystem. In particular the
MDSS_CORE_BCR is useful to reset the display subsystem to a known state
during boot, so add these.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250811-sc7280-mdss-reset-v1-2-83ceff1d48de@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Merge the addition of reset constants to the SC7280 display clock
controller binding through a topic branch to allow it to be included in
the DeviceTree branch as well.
Like other platforms the sc7280 display clock controller provides a
couple of resets, add the defines to allow referring to them.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250811-sc7280-mdss-reset-v1-1-83ceff1d48de@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Only one PCIe controller has been described so far, but the SC7280 has
two controllers/phys. Describe the second one as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250811-sc7280-pcie0-v1-1-6093e5b208f9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In converting marvell,comphy-cp110 to schema, the constraints for clocks on
marvell,comphy-a3700 are wrong, the maximum number of child nodes are wrong,
and the phy nodes may have a 'connector' child node:
phy@18300 (marvell,comphy-a3700): clock-names: False schema does not allow ['xtal']
phy@120000 (marvell,comphy-cp110): 'phy@3', 'phy@4', 'phy@5' do not match any of the regexes: '^phy@[0-2]$', '^pinctrl-[0-9]+$'
phy@120000 (marvell,comphy-cp110): phy@2: 'connector' does not match any of the regexes: '^pinctrl-[0-9]+$'
Fixes: 50355ac70d ("dt-bindings: phy: Convert marvell,comphy-cp110 to DT schema")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250806200138.1366189-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
Cc: stable@vger.kernel.org
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/ce70b98a201ce82b9df9aa80ac7a5eeaa2268e52.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This reverts commit 10af0273a3.
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org
Fixes: 10af0273a3 ("gpio: mlxbf3: only get IRQ for device instance 0")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Commit d33bd88ac0 ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0 ("ACPI: processor: perflib: Fix initial _PPC limit application")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The series consist of two small patches to clean up the qpic_ecc structure
in the spi-qpic-snand driver. The first one removes an unused member from
the structure, whereas the second reduces code duplication and removes
another two members from the same.
Add documentation about generic driver infrastructure, representing a
guideline on how the generic driver infrastructure is intended to be
used to implement bus specific driver APIs.
This covers aspects such as the bus specific driver trait, adapter
implementation, driver registration and custom device ID types.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250722150110.23565-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The documentation for the generic Device type is outdated and deserves
much more detail.
Hence, expand the documentation and cover topics such as device types,
device contexts, as well as information on how to use the generic device
infrastructure to implement bus and class specific device types.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250722150110.23565-3-dakr@kernel.org
[ Add empty line after code blocks, "in" -> "within", remove unnecessary
pin annotations in class device example. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Expand the documentation around DeviceContext states and types, in order
to provide detailed information about their purpose and relationship
with each other.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Link: https://lore.kernel.org/r/20250722150110.23565-2-dakr@kernel.org
[ Fix two minor typos. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
-----BEGIN PGP SIGNATURE-----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=kxTv
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2025-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-08-11
1) Fix flushing of all states in xfrm_state_fini.
From Sabrina Dubroca.
2) Fix some IPsec software offload features. These
got lost with some recent HW offload changes.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
udp: also consider secpath when evaluating ipsec use for checksumming
xfrm: bring back device check in validate_xmit_xfrm
xfrm: restore GSO for SW crypto
xfrm: flush all states in xfrm_state_fini
====================
Link: https://patch.msgid.link/20250811092008.731573-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
LMEM is partitioned between multiple VFs and we expect that the more
VFs we have, the less LMEM is assigned to each VF.
This means that we can achieve full LMEM BAR access without the need to
attempt full VF LMEM BAR resize via pci_resize_resource().
Always try to set the largest possible BAR size that allows to fit the
number of enabled VFs and inform the user in case the resize attempt is
not successful.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250527120637.665506-7-michal.winiarski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Bring v6.17-rc1 to propagate commits from other subsystems, particularly
PCI, which has some new functions needed for SR-IOV integration.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup() by passing in report descriptor smaller than
607 bytes. mt_report_fixup() attempts to patch byte offset 607
of the descriptor with 0x25 by first checking if byte offset
607 is 0x15 however it lacks bounds checks to verify if the
descriptor is big enough before conducting this check. Fix
this bug by ensuring the descriptor size is at least 608
bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ==================================================================
[ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[ 13.673297]
[ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[ 13.673297] Call Trace:
[ 13.673297] <TASK>
[ 13.673297] dump_stack_lvl+0x5f/0x80
[ 13.673297] print_report+0xd1/0x660
[ 13.673297] kasan_report+0xe5/0x120
[ 13.673297] __asan_report_load1_noabort+0x18/0x20
[ 13.673297] mt_report_fixup+0x103/0x110
[ 13.673297] hid_open_report+0x1ef/0x810
[ 13.673297] mt_probe+0x422/0x960
[ 13.673297] hid_device_probe+0x2e2/0x6f0
[ 13.673297] really_probe+0x1c6/0x6b0
[ 13.673297] __driver_probe_device+0x24f/0x310
[ 13.673297] driver_probe_device+0x4e/0x220
[ 13.673297] __device_attach_driver+0x169/0x320
[ 13.673297] bus_for_each_drv+0x11d/0x1b0
[ 13.673297] __device_attach+0x1b8/0x3e0
[ 13.673297] device_initial_probe+0x12/0x20
[ 13.673297] bus_probe_device+0x13d/0x180
[ 13.673297] device_add+0xe3a/0x1670
[ 13.673297] hid_add_device+0x31d/0xa40
[...]
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
There is a spelling mistake in the HID_U2FZERO description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Remove hard-coded strings by using the str_true_false() helper function.
Signed-off-by: Liu Song <liu.song13@zte.com.cn>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
During s2idle suspend/resume testing on some systems, occasional several
tens of seconds delays were observed in HID sensor resume handling. Trace
analysis revealed repeated "link not ready" timeout errors during
set/get_report operations, which were traced to the
hid_ishtp_cl_resume_handler() timing out while waiting for the ISHTP
resume acknowledgment. The previous timeout was set to 50ms, which proved
insufficient on affected machines.
Empirical measurements on failing systems showed that the time from ISH
resume initiation to receiving the ISHTP resume ack could be as long as
180ms. As a result, the 50ms timeout caused failures.
To address this, increase the wait timeout for ISHTP resume ack from 50ms
to 300ms, providing a safer margin for slower hardware. Additionally, add
error logging when a timeout occurs to aid future debugging and issue
triage. No functional changes are made beyond the timeout adjustment and
improved error reporting.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
steelseries_srws1_probe() still does not use devm_kzalloc() and
devm_led_classdev_register(), so there is a lot of code to safely manage
heap, which reduces readability and may cause memory leaks due to minor
patch mistakes in the future.
Therefore, it should be changed to use devm_kzalloc() and
devm_led_classdev_register() to easily and safely manage heap.
Also, the current steelseries driver mainly checks sd->quriks to determine
which product a specific HID device is, which is not the correct way.
remove(), unlike probe(), does not receive struct hid_device_id as an
argument, so it must check hdev unconditionally to know which product
it is.
However, since struct steelseries_device and struct steelseries_srws1_data
have different structures, if SRWS1 is removed in remove(), converts
hdev->dev, which is initialized to struct steelseries_srws1_data,
to struct steelseries_device and uses it. This causes various
memory-related bugs as completely unexpected values exist in member
variables of the structure.
Therefore, in order to modify probe() and remove() to work properly,
Arctis 1, 9 should be added to HID_USB_DEVICE and some functions should be
modified to check hdev->product when determining HID device product.
Fixes: a0c76896c3 ("HID: steelseries: Add support for Arctis 1 XBox")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Jakub Kicinski says:
====================
net: prevent deadlocks and mis-configuration with per-NAPI threaded config
Running the test added with a recent fix on a driver with persistent
NAPI config leads to a deadlock. The deadlock is fixed by patch 3,
patch 2 is I think a more fundamental problem with the way we
implemented the config.
I hope the fix makes sense, my own thinking is definitely colored
by my preference (IOW how the per-queue config RFC was implemented).
v1: https://lore.kernel.org/20250808014952.724762-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250809001205.1147153-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The following order of calls currently deadlocks if:
- device has threaded=1; and
- NAPI has persistent config with threaded=0.
netif_napi_add_weight_config()
dev->threaded == 1
napi_kthread_create()
napi_enable()
napi_restore_config()
napi_set_threaded(0)
napi_stop_kthread()
while (NAPIF_STATE_SCHED)
msleep(20)
We deadlock because disabled NAPI has STATE_SCHED set.
Creating a thread in netif_napi_add() just to destroy it in
napi_disable() is fairly ugly in the first place. Let's read
both the device config and the NAPI config in netif_napi_add().
Fixes: e6d7626881 ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
,--- [napi 0] - [napi 1]
[dev] | |
`--- [ncfg 0] - [ncfg 1]
so say we a device with 2 queues but only 1 enabled:
,--- [napi 0]
[dev] |
`--- [ncfg 0] - [ncfg 1]
now we set the device to threaded=1:
,---------- [napi 0 (thr:1)]
[dev(thr:1)] |
`---------- [ncfg 0 (thr:1)] - [ncfg 1 (thr:?)]
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e77 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d7626881 ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds Victus 16-r1xxx laptop DMI board name into existing
list.
Tested on 16-r1077nt and works without any problem.
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://lore.kernel.org/r/20250728115805.20954-2-edip@medip.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Even if hwmon registration fails, HSMP remains accessible through the
device file, so the operation should return success.
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250804101551.89866-1-suma.hegde@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If metric table address is not allocated, accessing metrics_bin will
result in a NULL pointer dereference, so add a check.
Fixes: 5150542b8e ("platform/x86/amd/hsmp: add support for metrics tbl")
Signed-off-by: Suma Hegde <suma.hegde@amd.com>
Link: https://lore.kernel.org/r/20250807100637.952729-1-suma.hegde@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the missing write_blocked check for updating sysfs related to uncore
efficiency latency control (ELC). If write operation is blocked return
error.
Fixes: bb516dc79c ("platform/x86/intel-uncore-freq: Add support for efficiency latency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250727210513.2898630-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Chris reported that even on a BIOS that has a new enough SMU F/W
version there is still a spurious IRQ1. Although the solution was
added to SMU F/W 64.66.0 it turns out there needs to be a matching
SBIOS change to activate it. Thus Linux shouldn't be avoiding the
IRQ1 workaround on newer SMU F/W because there is no indication the
BIOS change is in place.
Drop the match for 64.66.0+ and instead match all RN/CZN/BRC (they
all share same SMU F/W). Adjust the quirk infrastructure to allow
quirking the workaround on or off and also adjust existing quirks
to match properly.
Unfortunately this may cause some systems that did have the SBIOS
change in place to regress in keyboard wakeup but we don't have a
way to know. If a user reports a keyboard wakeup regression they can
run with amd_pmc.disable_workarounds=1 to deactivate the workaround
and share DMI data so that their system can be quirked not to use
the workaround in the upstream kernel.
Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4449
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250724185156.1827592-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Dell SMBIOS driver uses the "id" field inside struct device for
prioritizing the WMI backend over the SMM backend. Because of this
the WMI backend modifies the "id" field of the underlying WMI device.
However the WMI core itself uses wdev->dev.id internally to track
device IDs, so modifying this value will result in a resource leak.
Fix this by not using the "id" field inside struct device for SMBIOS
prioritization. Instead extend struct smbios_device with a separate
"priority" field.
Tested on a Dell Inspiron 3505.
Fixes: 73f0f2b52c ("platform/x86: wmi: Fix WMI device naming issue")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250722183841.9552-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge series from Daniel Almeida <daniel.almeida@collabora.com>:
This series implement two related changes to address a bit of an oversight
on my end on the initial patch for the Regulator abstraction. Note that
this is not a fix, as it just relaxes the constraints on the previous code
as it is safe to do so.
Patch 1 removes some needless &mut self for functions that already provide
their own locking on the C side.
Patch 2 implements Send and Sync. In particular, there is no reason for
Regulator<T> not to be Send, and as discussed above, it is naturally Sync.
Merge series from Joy Zou <joy.zou@nxp.com>:
Add binding document and driver.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
binding part
- change regulator node names into lowercase.
- add more description for nxp,i2c-crc-enable.
- remove the unnecessary nxp,dvs-run/standby-voltage property.
These changes come from review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add regulator-state-mem property for example.
driver part
- convert to use maple tree register cache.
- change of_match_ptr() name to lowercase since dt-binding changed.
- add more nxp,i2c-crc-enable description for commit message.
- remove the of_parse_cb and dvs from pf0900_regulators since the
unnecessary property nxp,dvs-run/standby-voltage removed.
- add set_suspend_enable/disable/voltage for the SW regulator_ops.
the run/standby voltage can be adjusted via the API which regulator
driver provides is recommended.
These changes come from binding review comments:
https://lore.kernel.org/imx/e9f38e38-7df7-4d19-b5c0-2f18aeebcc78@kernel.org/
- add bitfield.h header due to build issue.
- correct the sw4 id.
- add PF0900 prefix for short macro define in order to avoid duplication.
- merge the same mask define in order to simplify code.
- Link to v2: https://lore.kernel.org/r/20250721-b4-pf09-v2-v2-0-e2c568548032@nxp.com
Changes in v2:
binding part
- modify the binding file name to match compatible string.
- add one space for dt_binding_check warning.
- remove unnecessary quotes from "VAON".
- remove the unnecessary empty line.
- move unevaluatedProperties after the $ref.
- move additionalProperties after regulator type.
- remove unnecessary regulator description
driver part
- modify the copyright comment block to C++ style.
- add reg_read/write for regmap_bus.
- remove original pf0900_pmic_read/write.
- remove many regulator operations.
- use regmap_read replace pf0900_pmic_read.
- use regmap_update_bits and regmap_write_bits replace pf0900_pmic_write.
- move the code from pf0900.h to pf0900-regulator.c and delete the header file.
- remove unmask status interrupts and add unmask regulator interrupts.
- remove many interrupts check warning print from irq_handler.
- add notifier for regulator event.
- remove unused macro define.
- add PF0900 prefix for IRQ macro define in order to avoid duplication.
- use GENMASK() and BIT() to replace mask marco define
- remove redundant enum pf0900_chip_type.
- remove redundant print info and comments.
- add dvs property present check because this property is optional.
- remove ret == -EINVAL check from sw_set_dvs() function.
- Link to v1: https://lore.kernel.org/imx/20250617102025.3455544-1-joy.zou@nxp.com/
---
Joy Zou (2):
dt-bindings: regulator: add PF0900 regulator yaml
regulator: pf0900: Add PMIC PF0900 support
.../devicetree/bindings/regulator/nxp,pf0900.yaml | 163 ++++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/pf0900-regulator.c | 975 +++++++++++++++++++++
4 files changed, 1147 insertions(+)
---
base-commit: 84b92a499e7eca54ba1df6f6c6e01766025943f1
change-id: 20250714-b4-pf09-v2-91cdee6d1272
Best regards,
--
Joy Zou <joy.zou@nxp.com>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250811-restricted-pointers-spi-v1-1-32c47f954e4d@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert alc5623 audio codec binding to DT schema.
Also add "realtek,alc5621" to the compatible list for
existing use in kirkwood-t5325.dts.
Signed-off-by: Mahdi Khosravi <mmk1776@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250811080940.7909-1-mmk1776@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In aw8xxxx_profile_info(), strscpy() is called with the length of the
source string "null" rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'name' points to the fixed-size
buffer 'uinfo->value.enumerated.name', we can safely omit the size
argument and let strscpy() infer it using sizeof() and remove 'name'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250810214144.1985-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, ASID assignment for user VMs and page-table BO accounting for
client memory tracking are performed in xe_vm_create_ioctl.
To consolidate VM object initialization, move this logic to
xe_vm_create.
v2:
- removed unnecessary duplicate BO tracking code
- using the local variable xef to verify whether the VM is being created
by userspace
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-3-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
In several code paths, such as xe_pt_create(), the vm->xef field is used
to determine whether a VM originates from userspace or the kernel.
Previously, this handler was only assigned in xe_vm_create_ioctl(),
after the VM was created by xe_vm_create(). However, xe_vm_create()
triggers page table creation, and that function assumes vm->xef should
be already set. This could lead to incorrect origin detection.
To fix this problem and ensure consistency in the initialization of
the VM object, let's move the assignment of this handler to
xe_vm_create.
v2:
- take reference to the xe file object only when xef is not NULL
- release the reference to the xe file object on the error path (Matthew)
Fixes: 7f387e6012 ("drm/xe: add XE_BO_FLAG_PINNED_LATE_RESTORE")
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250811104358.2064150-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Yao Zi says:
====================
Fix broken link with TH1520 GMAC when linkspeed changes
It's noted that on TH1520 SoC, the GMAC's link becomes broken after
the link speed is changed (for example, running ethtool -s eth0 speed
100 on the peer when negotiated to 1Gbps), but the GMAC could function
normally if the speed is brought back to the initial.
Just like many other SoCs utilizing STMMAC IP, we need to adjust the TX
clock supplying TH1520's GMAC through some SoC-specific glue registers
when linkspeed changes. But it's found that after the full kernel
startup, reading from them results in garbage and writing to them makes
no effect, which is the cause of broken link.
Further testing shows perisys-apb4-hclk must be ungated for normal
access to Th1520 GMAC APB glue registers, which is neither described in
dt-binding nor acquired by the driver.
This series expands the dt-binding of TH1520's GMAC to allow an extra
"APB glue registers interface clock", instructs the driver to acquire
and enable the clock, and finally supplies CLK_PERISYS_APB4_HCLK for
TH1520's GMACs in SoC devicetree.
v2: https://lore.kernel.org/netdev/20250801091240.46114-1-ziyao@disroot.org/
v1: https://lore.kernel.org/all/20250729093734.40132-1-ziyao@disroot.org/
====================
Link: https://patch.msgid.link/20250808093655.48074-2-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Describe perisys-apb4-hclk as the APB clock for TH1520 SoC, which is
essential for accessing GMAC glue registers.
Fixes: 7e756671a6 ("riscv: dts: thead: Add TH1520 ethernet nodes")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-5-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3a ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Besides ones for GMAC core and peripheral registers, the TH1520 GMAC
requires one more clock for configuring APB glue registers. Describe
it in the binding.
Fixes: f920ce04c3 ("dt-bindings: net: Add T-HEAD dwmac support")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-3-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, when a Secure TSC enabled SNP guest attempts to write to the
intercepted GUEST_TSC_FREQ MSR (a read-only MSR), the guest kernel response
incorrectly implies a VMM configuration error, when in fact it is the usual
VMM configuration to intercept writes to read-only MSRs, unless explicitly
documented.
Modify the intercepted TSC MSR #VC handling:
* Write to GUEST_TSC_FREQ will generate a #GP instead of terminating the
guest
* Write to MSR_IA32_TSC will generate a #GP instead of silently ignoring it
However, continue to terminate the guest when reading from intercepted
GUEST_TSC_FREQ MSR with Secure TSC enabled, as intercepted reads indicate an
improper VMM configuration for Secure TSC enabled SNP guests.
[ bp: simplify comment. ]
Fixes: 38cc6495cd ("x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250722074853.22253-1-nikunj@amd.com
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d ("phylib: Add device reset GPIO support") # see notes
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ]
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
