./tools/testing/selftests/sched_ext/hotplug.c: sched.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=22941
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Qualcomm DTS uses sorting of MMIO nodes by the unit address, so move
few nodes in SM8650 DTSI to fix that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250727193652.4029-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
outputs but the lookup flags in the DTS don't reflect that triggering
warnings from GPIO core. Add the appropriate flags.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250811-qcom-gpio-lookup-open-drain-v1-3-b5496f80e047@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
outputs but the lookup flags in the DTS don't reflect that triggering
warnings from GPIO core. Add the appropriate flags.
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250811-qcom-gpio-lookup-open-drain-v1-2-b5496f80e047@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The I2C GPIO bus driver enforces the SDA and SCL pins as open-drain
outputs but the lookup flags in the DTS don't reflect that triggering
warnings from GPIO core. Add the appropriate flags.
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250811-qcom-gpio-lookup-open-drain-v1-1-b5496f80e047@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The reg for the GPIOs is 0xb800 and not 0x8800, so fix this copy-paste
mistake.
Fixes: e9c0a4e484 ("arm64: dts: qcom: Add PMK8550 pmic dtsi")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250625-pmk8550-gpio-name-v1-1-58402849f365@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable WiFi/BT on qcs615-ride by adding a node for the PMU module of the
WCN6855 and assigning its LDO power outputs to the existing WiFi/BT
module.
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250727-615-v7-2-2adb6233bbb9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add an original PCIe port for WLAN. This port will be referenced and
supplemented by specific WLAN devices.
Signed-off-by: Yu Zhang (Yuriy) <yu.zhang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250727-615-v7-1-2adb6233bbb9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The IPQ5018 SoC contains an internal GE PHY, always at phy address 7.
As such, let's add the GE PHY node to the SoC dtsi.
The LDO controller found in the SoC must be enabled to provide constant
low voltages to the PHY. The mdio-ipq4019 driver already has support
for this, so adding the appropriate TCSR register offset.
In addition, the GE PHY outputs both the RX and TX clocks to the GCC
which gate controls them and routes them back to the PHY itself.
So let's create two DT fixed clocks and register them in the GCC node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250630-ipq5018-ge-phy-v6-3-01be06378c15@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ5018 contains two mdio buses of which one bus is used to control the
SoC's internal GE PHY, while the other bus is connected to external PHYs
or switches.
There's already support for IPQ5018 in the mdio-ipq4019 driver, so let's
simply add the mdio nodes for them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20250630-ipq5018-ge-phy-v6-2-01be06378c15@outlook.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
xo_board is fixed to 24 MHZ, which is routed from WiFi output clock
48 MHZ (also being the reference clock of CMN PLL) divided 2 by
analog block routing channel.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250610-qcom_ipq5424_cmnpll-v3-4-ceada8165645@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CMN PLL node for enabling output clocks to the networking
hardware blocks on IPQ5424 devices.
The reference clock of CMN PLL is routed from XO to the CMN PLL
through the internal WiFi block.
.XO (48 MHZ or 96 MHZ or 192 MHZ)-->WiFi (multiplier/divider)-->
48 MHZ to CMN PLL.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250610-qcom_ipq5424_cmnpll-v3-3-ceada8165645@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable USB audio offloading which allows to play audio via a USB-C
headset with lower power consumption and enabling some other features.
This can be used like the following:
$ amixer -c0 cset name='USB_RX Audio Mixer MultiMedia1' On
$ aplay --device=plughw:0,0 test.wav
Compared to regular playback to the USB sound card no xhci-hcd
interrupts appear during playback, instead the ADSP will be handling the
USB transfers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250501-fp4-usb-audio-offload-v2-5-30f4596281cd@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for q6usb which handles USB audio offloading, allowing to
play audio via a USB-C headset with lower power consumption and enabling
some other features.
We also need to set num-hc-interrupters for the dwc3 for the q6usb to be
able to use its sideband interrupter.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250501-fp4-usb-audio-offload-v2-4-30f4596281cd@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To enable Bluetooth pwrseq appears to be required for the WCN7850.
Add the nodes from QCP, add the TODO hint for vreg_wcn_0p95 and
vreg_wcn_1p9
Add uart14 for the BT interface.
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250624-slim7x-bt-v3-1-7ada18058419@oldschoolsolutions.biz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
X1P42100 SoC has a new GPU called Adreno X1-45 which is a smaller
version of Adreno X1-85 GPU. Describe this new GPU and also add
the secure gpu firmware path that should used for X1P42100 CRD.
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com> # x1-26-100
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250623-x1p-adreno-v4-4-d2575c839cbb@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The established practice is to have the base DTSI file named after the
base SoC name (see examples of qrb5165-rb5.dts vs sm8250.dtsi,
qrb2210-rb1.dts vs qcm2290.dtsi, qrb4210-rb2.dts vs sm4250.dtsi vs
sm6115.dtsi). Rename the SoC dtsi file accordingly and add "qcom,sm6150"
as a fallback compat string.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250604-qcs615-sm6150-v1-2-2f01fd46c365@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QCS615 SoC is based on the earlier mobile chip SM6150. Add corresponding
compatible string to follow established practice for IoT chips.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250604-qcs615-sm6150-v1-1-2f01fd46c365@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
DT bindings for the DPU SA8775P declare the first clock to be "nrt_bus",
not just "bus". Fix the DT file accordingly.
Fixes: 2f39d2d46c ("arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250602-sa8775p-fix-dts-v1-1-f9f6271b33a3@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On Lenovo Yoga C630 second (left) Type-C port is not connected to the
SoC directly. Instead it has a USB hub, which also powers on the onboard
USB camera. Describe these signal lines properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250608-c630-ports-v1-1-e4951db96efa@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use defined IDs to reference DSI PHY clocks instead of using raw
numbers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250618-sar2130p-fix-mdss-v1-3-78c2fb9e9fba@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Switch the main memory interconnect of the MDSS device to use
QCOM_ICC_TAG_ALWAYS instead of _ACTIVE_ONLY.
Fixes: 541d0b2f4d ("arm64: dts: qcom: sar2130p: add display nodes")
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250618-sar2130p-fix-mdss-v1-1-78c2fb9e9fba@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Rename DP labels to have mdss_ prefix, so that corresponding device
nodes are grouped together.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250621-sdm845-dp-rename-v1-1-6f7f13443b43@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ5018 has tsens V1.0 IP with 5 sensors, though 4 are in use.
There is no RPM, so tsens has to be manually enabled. Adding the tsens
and nvmem nodes and adding 4 thermal sensors (zones). The critical trip
temperature is set to 120'C with an action to reboot.
In addition, adding a cooling device to the CPU thermal zone which uses
CPU frequency scaling.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[bjorn: Added tsens-v1 fallback compatible, per binding]
Link: https://lore.kernel.org/r/20250612-ipq5018-tsens-v13-2-a210f3683240@outlook.com
Receive tools/sched_ext updates form https://github.com/sched-ext/scx to
sync userspace bits:
- basic BPF arena allocator abstractions,
- additional process flags definitions,
- fixed is_migration_disabled() helper,
- separate out user_exit_info BPF and user space code.
This also fixes the following warning when building the selftests:
tools/sched_ext/include/scx/common.bpf.h:550:9: warning: 'likely' macro redefined [-Wmacro-redefined]
550 | #define likely(x) __builtin_expect(!!(x), 1)
| ^
Co-developed-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
If the channel selection or deselection times out, it indicates
a failure in the mux's I2C subsystem. Without sending a reset pulse,
a power-on-reset of the entire device would be required to restore
communication.
The datasheet specifies a minimum hold time of 4 ns for the reset
pulse, but due to the path's capacitance and themux having its own
clock, it is recommended to extend this to approximately 1 us.
Since reset controller is used, there is no need to take care of other
devices sharing the same reset line.
Signed-off-by: Wojciech Siudy <wojciech.siudy@nokia.com>
[wsa: removed superfluous prinout, unneeded braces and fixed indent]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fallback to legacy reset-gpios is no more needed, because the framework
can use reset-gpios properity now as well.
Signed-off-by: Wojciech Siudy <wojciech.siudy@nokia.com>
[wsa: fixed whitespace issue]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The advantages of converting existing sysfs show() methods to sysfs_emit()
and sysfs_emit_at() do not outweigh the risk of introducing bugs. Hence
recommend sysfs_emit() and sysfs_emit_at() only for new implementations of
show() methods.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250724153449.2433395-1-bvanassche@acm.org
Corrected a few spelling errors and improved the phrasing
changes since v1:
--corrected as per review
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250726063645.4156-1-vnranganath.20@gmail.com
The pipe size limit used when the fs.pipe-user-pages-soft sysctl value
is reached was increased from one to two pages in commit 46c4c9d1be;
update the documentation to match the new reality.
Fixes: 46c4c9d1be ("pipe: increase minimum default pipe size to 2 pages")
Signed-off-by: Štěpán Němec <stepnem@smrk.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250729-pipedoc-v2-1-18b8e735a9c6@smrk.net
generic/091 may fail, then it bisects to the bad commit ba8dac350f
("f2fs: fix to zero post-eof page").
What will cause generic/091 to fail is something like below Testcase #1:
1. write 16k as compressed blocks
2. truncate to 12k
3. truncate to 20k
4. verify data in range of [12k, 16k], however data is not zero as
expected
Script of Testcase #1
mkfs.f2fs -f -O extra_attr,compression /dev/vdb
mount -t f2fs -o compress_extension=* /dev/vdb /mnt/f2fs
dd if=/dev/zero of=/mnt/f2fs/file bs=12k count=1
dd if=/dev/random of=/mnt/f2fs/file bs=4k count=1 seek=3 conv=notrunc
sync
truncate -s $((12*1024)) /mnt/f2fs/file
truncate -s $((20*1024)) /mnt/f2fs/file
dd if=/mnt/f2fs/file of=/mnt/f2fs/data bs=4k count=1 skip=3
od /mnt/f2fs/data
umount /mnt/f2fs
Analisys:
in step 2), we will redirty all data pages from #0 to #3 in compressed
cluster, and zero page #3,
in step 3), f2fs_setattr() will call f2fs_zero_post_eof_page() to drop
all page cache post eof, includeing dirtied page #3,
in step 4) when we read data from page #3, it will decompressed cluster
and extra random data to page #3, finally, we hit the non-zeroed data
post eof.
However, the commit ba8dac350f ("f2fs: fix to zero post-eof page") just
let the issue be reproduced easily, w/o the commit, it can reproduce this
bug w/ below Testcase #2:
1. write 16k as compressed blocks
2. truncate to 8k
3. truncate to 12k
4. truncate to 20k
5. verify data in range of [12k, 16k], however data is not zero as
expected
Script of Testcase #2
mkfs.f2fs -f -O extra_attr,compression /dev/vdb
mount -t f2fs -o compress_extension=* /dev/vdb /mnt/f2fs
dd if=/dev/zero of=/mnt/f2fs/file bs=12k count=1
dd if=/dev/random of=/mnt/f2fs/file bs=4k count=1 seek=3 conv=notrunc
sync
truncate -s $((8*1024)) /mnt/f2fs/file
truncate -s $((12*1024)) /mnt/f2fs/file
truncate -s $((20*1024)) /mnt/f2fs/file
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/f2fs/file of=/mnt/f2fs/data bs=4k count=1 skip=3
od /mnt/f2fs/data
umount /mnt/f2fs
Anlysis:
in step 2), we will redirty all data pages from #0 to #3 in compressed
cluster, and zero page #2 and #3,
in step 3), we will truncate page #3 in page cache,
in step 4), expand file size,
in step 5), hit random data post eof w/ the same reason in Testcase #1.
Root Cause:
In f2fs_truncate_partial_cluster(), after we truncate partial data block
on compressed cluster, all pages in cluster including the one post eof
will be dirtied, after another tuncation, dirty page post eof will be
dropped, however on-disk compressed cluster is still valid, it may
include non-zero data post eof, result in exposing previous non-zero data
post eof while reading.
Fix:
In f2fs_truncate_partial_cluster(), let change as below to fix:
- call filemap_write_and_wait_range() to flush dirty page
- call truncate_pagecache() to drop pages or zero partial page post eof
- call f2fs_do_truncate_blocks() to truncate non-compress cluster to
last valid block
Fixes: 3265d3db1f ("f2fs: support partial truncation on compressed inode")
Reported-by: Jan Prusakowski <jprusakowski@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Should cast type of folio->index from pgoff_t to loff_t to avoid overflow
while left shift operation.
Fixes: 3265d3db1f ("f2fs: support partial truncation on compressed inode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This commit introduces a new read-only sysfs entry at
/sys/fs/f2fs/<device>/effective_lookup_mode.
This entry displays the actual directory lookup mode F2FS is
currently using. This is needed for debugging and verification,
as the behavior is determined by both on-disk flags and mount
options.
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
While reading physical_memory.rst, I noticed that N_GENERIC_INITIATOR has not been update
from the node_states list, even though it's already added in commit 894c26a1c2.
Signed-off-by: Kim Tae Hyun <kimth0312@gmail.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250802125801.10068-1-kimth0312@gmail.com
For casefolded directories, f2fs may fall back to a linear search if
a hash-based lookup fails. This can cause severe performance
regressions.
While this behavior can be controlled by userspace tools (e.g. mkfs,
fsck) by setting an on-disk flag, a kernel-level solution is needed
to guarantee the lookup behavior regardless of the on-disk state.
This commit introduces the 'lookup_mode' mount option to provide this
kernel-side control.
The option accepts three values:
- perf: (Default) Enforces a hash-only lookup. The linear fallback
is always disabled.
- compat: Enables the linear search fallback for compatibility with
directory entries from older kernels.
- auto: Determines the mode based on the on-disk flag, preserving the
userspace-based behavior.
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Otherwise, the filesystem may unaware of potential file corruption.
Signed-off-by: mason.zhang <masonzhang.linuxer@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If reserve_root mount option is not assigned, __allow_reserved_blocks()
will return false, it's not correct, fix it.
Fixes: 7e65be49ed ("f2fs: add reserved blocks for root user")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
