mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-04 19:54:59 +00:00
1,399,042 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Paolo Bonzini
|
d7f4aac280 |
Merge tag 'kvm-x86-mmu-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM x86 MMU changes for 6.17 - Exempt nested EPT from the the !USER + CR0.WP logic, as EPT doesn't interact with CR0.WP. - Move the TDX hardware setup code to tdx.c to better co-locate TDX code and eliminate a few global symbols. - Dynamically allocation the shadow MMU's hashed page list, and defer allocating the hashed list until it's actually needed (the TDP MMU doesn't use the list). |
||
|
Paolo Bonzini
|
1a14928e2e |
Merge tag 'kvm-x86-misc-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.17 - Prevert the host's DEBUGCTL.FREEZE_IN_SMM (Intel only) when running the guest. Failure to honor FREEZE_IN_SMM can bleed host state into the guest. - Explicitly check vmcs12.GUEST_DEBUGCTL on nested VM-Enter (Intel only) to prevent L1 from running L2 with features that KVM doesn't support, e.g. BTF. - Intercept SPEC_CTRL on AMD if the MSR shouldn't exist according to the vCPU's CPUID model. - Rework the MSR interception code so that the SVM and VMX APIs are more or less identical. - Recalculate all MSR intercepts from the "source" on MSR filter changes, and drop the dedicated "shadow" bitmaps (and their awful "max" size defines). - WARN and reject loading kvm-amd.ko instead of panicking the kernel if the nested SVM MSRPM offsets tracker can't handle an MSR. - Advertise support for LKGS (Load Kernel GS base), a new instruction that's loosely related to FRED, but is supported and enumerated independently. - Fix a user-triggerable WARN that syzkaller found by stuffing INIT_RECEIVED, a.k.a. WFS, and then putting the vCPU into VMX Root Mode (post-VMXON). Use the same approach KVM uses for dealing with "impossible" emulation when running a !URG guest, and simply wait until KVM_RUN to detect that the vCPU has architecturally impossible state. - Add KVM_X86_DISABLE_EXITS_APERFMPERF to allow disabling interception of APERF/MPERF reads, so that a "properly" configured VM can "virtualize" APERF/MPERF (with many caveats). - Reject KVM_SET_TSC_KHZ if vCPUs have been created, as changing the "default" frequency is unsupported for VMs with a "secure" TSC, and there's no known use case for changing the default frequency for other VM types. |
||
|
Paolo Bonzini
|
9de13951d5 |
Merge tag 'kvm-x86-no_assignment-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM VFIO device assignment cleanups for 6.17
Kill off kvm_arch_{start,end}_assignment() and x86's associated tracking now
that KVM no longer uses assigned_device_count as a bad heuristic for "VM has
an irqbypass producer" or for "VM has access to host MMIO".
|
||
|
Paolo Bonzini
|
cc5a1021aa |
Merge tag 'kvm-x86-dirty_ring-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM Dirty Ring changes for 6.17 Fix issues with dirty ring harvesting where KVM doesn't bound the processing of entries in any way, which allows userspace to keep KVM in a tight loop indefinitely. Clean up code and comments along the way. |
||
|
Paolo Bonzini
|
d284562862 |
Merge tag 'kvm-x86-generic-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.17 - Add a tracepoint for KVM_SET_MEMORY_ATTRIBUTES to help debug issues related to private <=> shared memory conversions. - Drop guest_memfd's .getattr() implementation as the VFS layer will call generic_fillattr() if inode_operations.getattr is NULL. |
||
|
Paolo Bonzini
|
f05efcfe07 |
Merge tag 'kvm-x86-mmio-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM MMIO Stale Data mitigation cleanup for 6.17 Rework KVM's mitigation for the MMIO State Data vulnerability to track whether or not a vCPU has access to (host) MMIO based on the MMU that will be used when running in the guest. The current approach doesn't actually detect whether or not a guest has access to MMIO, and is prone to false negatives (and to a lesser extent, false positives), as KVM_DEV_VFIO_FILE_ADD is optional, and obviously only covers VFIO devices. |
||
|
Paolo Bonzini
|
f02b1bcc73 |
Merge tag 'kvm-x86-irqs-6.17' of https://github.com/kvm-x86/linux into HEAD
KVM IRQ changes for 6.17 - Rework irqbypass to track/match producers and consumers via an xarray instead of a linked list. Using a linked list leads to O(n^2) insertion times, which is hugely problematic for use cases that create large numbers of VMs. Such use cases typically don't actually use irqbypass, but eliminating the pointless registration is a future problem to solve as it likely requires new uAPI. - Track irqbypass's "token" as "struct eventfd_ctx *" instead of a "void *", to avoid making a simple concept unnecessarily difficult to understand. - Add CONFIG_KVM_IOAPIC for x86 to allow disabling support for I/O APIC, PIC, and PIT emulation at compile time. - Drop x86's irq_comm.c, and move a pile of IRQ related code into irq.c. - Fix a variety of flaws and bugs in the AVIC device posted IRQ code. - Inhibited AVIC if a vCPU's ID is too big (relative to what hardware supports) instead of rejecting vCPU creation. - Extend enable_ipiv module param support to SVM, by simply leaving IsRunning clear in the vCPU's physical ID table entry. - Disable IPI virtualization, via enable_ipiv, if the CPU is affected by erratum #1235, to allow (safely) enabling AVIC on such CPUs. - Dedup x86's device posted IRQ code, as the vast majority of functionality can be shared verbatime between SVM and VMX. - Harden the device posted IRQ code against bugs and runtime errors. - Use vcpu_idx, not vcpu_id, for GA log tag/metadata, to make lookups O(1) instead of O(n). - Generate GA Log interrupts if and only if the target vCPU is blocking, i.e. only if KVM needs a notification in order to wake the vCPU. - Decouple device posted IRQs from VFIO device assignment, as binding a VM to a VFIO group is not a requirement for enabling device posted IRQs. - Clean up and document/comment the irqfd assignment code. - Disallow binding multiple irqfds to an eventfd with a priority waiter, i.e. ensure an eventfd is bound to at most one irqfd through the entire host, and add a selftest to verify eventfd:irqfd bindings are globally unique. |
||
|
Paolo Bonzini
|
65164fd0f6 |
KVM/riscv changes for 6.17
- Enabled ring-based dirty memory tracking - Improved perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU related improvements for KVM RISC-V for upcoming nested virtualization -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmiIr0QACgkQrUjsVaLH LAf4yA/+KkfQCgMFhwpml6tIzFaa9yS+C9oqemnlWVT/wTADg18/+hraomqUnYhY HqOPdWo6O3vmH6E0jR6+AQXz5f4whYl8X8m+HdBHz8c1rF6ozoLMF4Qh3lsDDuZ0 7pdIEzkNLCA3umBxXUzy7yexKWSzcGD3521toFMPADQHaZTwT8Om5/KLblHB+he3 1DzsvErPWknWW1pynvSUJoD4zB41Qn364sJvyq4tAW6i8DmxLAmM/+Reh7GBP83r t7nAYVdnYikFj0oCb60NcFHqOQpk88mZTqCPMeZD1BoazEDXCPkdx0J44NsBRjun BhEpgBLIZDIwOF1A/DDIPrNuNOjSeeUAsAY1sK/yVEOkVZ1HPndyCil5SkE1FJHT dmsJBXq96dTlXYo9jBfExFUaUCI1mivLbX7uziIT1876IgLr5NlEJSbwk+TQ8VmR IS1PISi7yp5LeZcJEh6PBYgo02UE9gQ/C3tvvcaHbxXyQjVacB6Dw7EnaBArYMwv dbEPkxXem90Vup90ixgdLBW3nGCDckpogbsmlqoxV5m3MOknE5L8IuWxKXKB56Tp pxp7o1JywBV+Ym5w1BkpTvyEL/a2VDGFOfjryq/h8NAVxXPfwk2plyNhrwLt+Naz dYF7RprQL3XTtPnVOND6mMHyl2Sz9y0dc2tj6mpGamSBWPxlP/w= =ifud -----END PGP SIGNATURE----- Merge tag 'kvm-riscv-6.17-2' of https://github.com/kvm-riscv/linux into HEAD KVM/riscv changes for 6.17 - Enabled ring-based dirty memory tracking - Improved perf kvm stat to report interrupt events - Delegate illegal instruction trap to VS-mode - MMU related improvements for KVM RISC-V for upcoming nested virtualization |
||
Yu Kuai
|
5421681bc3 |
blk-ioc: don't hold queue_lock for ioc_lookup_icq()
Currently issue io can grab queue_lock three times from bfq_bio_merge(), bfq_limit_depth() and bfq_prepare_request(), the queue_lock is not necessary if icq is already created because both queue and ioc can't be freed before io issuing is done, hence remove the unnecessary queue_lock and use rcu to protect radix tree lookup. Noted this is also a prep patch to support request batch dispatching[1]. [1] https://lore.kernel.org/all/20250722072431.610354-1-yukuai1@huaweicloud.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20250729023229.2944898-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
John Garry
|
1da67b5b17 |
block: Enforce power-of-2 physical block size
The merging/splitting code and other queue limits checking depends on the physical block size being a power-of-2, so enforce it. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20250729091448.1691334-3-john.g.garry@oracle.com [axboe: add missing braces] Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
John Garry
|
448dfecc7f |
block: avoid possible overflow for chunk_sectors check in blk_stack_limits()
In blk_stack_limits(), we check that the t->chunk_sectors value is a multiple of the t->physical_block_size value. However, by finding the chunk_sectors value in bytes, we may overflow the unsigned int which holds chunk_sectors, so change the check to be based on sectors. Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250729091448.1691334-2-john.g.garry@oracle.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Damien Le Moal
|
459779d04a |
block: Improve read ahead size for rotational devices
For a device that does not advertize an optimal I/O size, the function blk_apply_bdi_limits() defaults to an initial setting of the ra_pages field of struct backing_dev_info to VM_READAHEAD_PAGES, that is, 128 KB. This low I/O size value is far from being optimal for hard-disk devices: when reading files from multiple contexts using buffered I/Os, the seek overhead between the small read commands generated to read-ahead multiple files will significantly limit the performance that can be achieved. This fact applies to all ATA devices as ATA does not define an optimal I/O size and the SCSI SAT specification does not define a default value to expose to the host. Modify blk_apply_bdi_limits() to use a device max_sectors limit to calculate the ra_pages field of struct backing_dev_info, when the device is a rotational one (BLK_FEAT_ROTATIONAL feature is set). For a SCSI disk, this defaults to 2560 KB, which significantly improve performance for buffered reads. Using XFS and sequentially reading randomly selected (large) files stored on a SATA HDD, the maximum throughput achieved with 8 readers reading files with 1MB buffered I/Os increases from 122 MB/s to 167 MB/s (+36%). The improvement is even larger when reading files using 128 KB buffered I/Os, with a throughput increasing from 57 MB/s to 165 MB/s (+189%). Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20250616062856.1629897-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Jouni Högander
|
5a569ef4d4 |
drm/i915/display: Set C10_VDR_CTRL_MSGBUS_ACCESS before phy reg read
According to C10 VDR Register programming sequence we need set C10_VDR_CTRL_MSGBUS_ACCESS before accessing PHY internal registers from MsgBus. v2: set C10_VDR_CTRL_MSGBUS_ACCESS once for all owned lanes Bspec: 68962 Fixes: |
||
|
Jouni Högander
|
3eb63578d8 |
drm/i915/display: Ensure phy is accessible on lfps configuration
Ensure phy is accessible on lfps configuration by adding intel_cx0_phy_transaction_begin/end around it. Fixes: |
||
|
Jouni Högander
|
c338923c4c |
drm/i915/display: Avoid unnecessarily calling intel_cx0_get_owned_lane_mask
Currently we are always calling intel_cx0_get_owned_lane_mask when
intel_lnl_mac_transmit_lfps is called. Avoid this in cases where it's not
needed.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250722125618.1842615-3-jouni.hogander@intel.com
(cherry picked from commit
|
||
|
Jouni Högander
|
a045246b68 |
drm/i915/display: Write PHY_CMN1_CONTROL only when using AUXLess ALPM
We are seeing "dmesg-warn/abort - *ERROR* PHY * failed after 3 retries" since we started configuring LFPS sending. According to Bspec Configuring LFPS sending is needed only when using AUXLess ALPM. This patch avoids these failures by configuring LFPS sending only when using AUXLess ALPM. Bspec: 68849 Fixes: |
||
Jani Nikula
|
b116bd3ad3 |
drm/i915/display: remove superfluous <linux/types.h> includes
Commit
|
||
Masami Hiramatsu (Google)
|
a3e892ab0f |
tracing: fprobe: Fix infinite recursion using preempt_*_notrace()
Since preempt_count_add/del() are tracable functions, it is not allowed
to use preempt_disable/enable() in ftrace handlers. Without this fix,
probing on `preempt_count_add%return` will cause an infinite recursion
of fprobes.
To fix this problem, use preempt_disable/enable_notrace() in
fprobe_return().
Link: https://lore.kernel.org/all/175374642359.1471729.1054175011228386560.stgit@mhiramat.tok.corp.google.com/
Fixes:
|
||
Dave Airlie
|
711fa2667d |
Two more bridge conversions to devm_drm_bridge_alloc that address a
warning now reported by the bridge core code. -----BEGIN PGP SIGNATURE----- iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaIHYJwAKCRAnX84Zoj2+ dvshAXoDY0O03PDFbmLM0wcVt9hlQKIeR3feXqeDM0wtBxfzKUGr/onSFsyR4EDg /fvvj84BgMBXhHHMGd684u4+IFnz51wGuxUjPXgmOG51je4CLMqXx2sel3Xrr8h0 yPHYQ7PX5w== =WQro -----END PGP SIGNATURE----- Merge tag 'drm-misc-next-fixes-2025-07-24' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next Two more bridge conversions to devm_drm_bridge_alloc that address a warning now reported by the bridge core code. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://lore.kernel.org/r/20250724-petite-gray-foxhound-b4fbb8@houat |
||
Linus Torvalds
|
86aa721820 |
chrome-platform: Updates for v6.17
* New
- Support ECC in chromeos_pstore.
- Allow to control power and data role via sysfs in cros_ec_typec.
* Improvements
- Defer probe when the dependencies are not ready in cros_ec_typec.
- Retry when a sensor is not ready in cros_ec_sensorhub.
* Fixes
- Unregister the blocking notifier as well when unregistering the
struct cros_ec_device.
* Cleanups
- Remove redundant code and leverage more suitable helper macro in
chromeos_laptop.
- Fix typo.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCaIcVZhMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz06+oBAI/DYCKldtOuy+evThTHsvcysYV9bTao
M0j6jwO0/UyMAP9lnTnkt9xAXwurtGtQndFUEmmXPEiIwFlyOS3e/Jg6BQ==
=xX5P
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Support ECC in chromeos_pstore
- Allow to control power and data role via sysfs in cros_ec_typec
Improvements:
- Defer probe when the dependencies are not ready in cros_ec_typec
- Retry when a sensor is not ready in cros_ec_sensorhub
Fixes:
- Unregister the blocking notifier as well when unregistering the
struct cros_ec_device.
Cleanups:
- Remove redundant code and leverage more suitable helper macro in
chromeos_laptop
- Fix typo"
* tag 'chrome-platform-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Fix typo in CROS_USBPD_NOTIFY help text
platform/chrome: cros_ec_typec: Check ec platform device pointer
platform/chrome: cros_ec: Unregister notifier in cros_ec_unregister()
platform/chrome: cros_ec_typec: Add role swap ops
platform/chrome: chromeos_laptop: Replace open coded variant of DEFINE_RES_IRQ()
platform/chrome: chromeos_laptop: Remove duplicate check
platform/chrome: cros_ec_sensorhub: Retries when a sensor is not ready
platform/chrome: chromeos_pstore: Add ecc_size module parameter
platform/chrome: cros_ec_typec: Defer probe on missing EC parent
|
||
|
Linus Torvalds
|
9669b2499e |
platform-drivers-x86 for v6.17-1
Highlights
- alienware: Add more precise labels to fans
- amd/hsmp: Improve misleading probe errors (make the legacy driver
aware when HSMP is supported through the ACPI driver)
- amd/pmc: Add Lenovo Yoga 6 13ALCL6 to pmc quirk list
- drm/xe: Correct (D)VSEC information to support PMT crashlog feature
- fujitsu: Clamp charge threshold instead of returning an error
- ideapad: Expore change types
- intel/pmt:
- Add PMT Discovery driver
- Add API to retrieve telemetry regions by feature
- Fix crashlog NULL access
- Support Battlemage GPU (BMG) crashlog
- intel/vsec:
- Add Discovery feature
- Add feature dependency support using device links
- lenovo:
- Move lenovo drivers under drivers/platform/x86/lenovo/
- Add WMI drivers for Lenovo Gaming series
- Improve DMI handling
- oxpec:
- Add support for OneXPlayer X1 Mini Pro (Strix Point variant)
- Fix EC registers for G1 AMD
- samsung-laptop: Expose change types
- wmi: Fix WMI device naming issue (same GUID corner cases)
- x86-android-tables: Add ovc-capacity-table to generic battery nodes
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
Add Lenovo Capability Data 01 WMI Driver:
- Add Lenovo Capability Data 01 WMI Driver
Add Lenovo Gamezone WMI Driver:
- Add Lenovo Gamezone WMI Driver
Add Lenovo Other Mode WMI Driver:
- Add Lenovo Other Mode WMI Driver
Add lenovo-wmi-* driver Documentation:
- Add lenovo-wmi-* driver Documentation
Add Lenovo WMI Events Driver:
- Add Lenovo WMI Events Driver
Add lenovo-wmi-helpers:
- Add lenovo-wmi-helpers
alienware-wmi-wmax:
- Add appropriate labels to fans
amd/hsmp:
- Enhance the print messages to prevent confusion
- Use IS_ENABLED() instead of IS_REACHABLE()
amd: pmc:
- Add Lenovo Yoga 6 13ALC6 to pmc quirk list
arm64: lenovo-yoga-c630:
- use the auxiliary device creation helper
dell_rbu:
- Remove unused struct
dell-uart-backlight:
- Use blacklight power constant
docs:
- Add ABI documentation for intel_pmt feature directories
Documentation: ABI:
- Update WMI device paths in ABI docs
drm/xe:
- Correct BMG VSEC header sizing
- Correct the rev value for the DVSEC entries
fujitsu:
- clamp charge_control_end_threshold values to 50
- use unsigned int for kstrtounit
ideapad:
- Expose charge_types
intel/pmt:
- Add PMT Discovery driver
- add register access helpers
- correct types
- decouple sysfs and namespace
intel/pmt/discovery:
- fix format string warning
- Fix size_t specifiers for 32-bit
- Get telemetry attributes
intel/pmt:
- fix a crashlog NULL pointer access
- fix build dependency for kunit test
- KUNIT test for PMT Enhanced Discovery API
- mutex clean up
- refactor base parameter
- re-order trigger logic
- support BMG crashlog
intel/pmt/telemetry:
- Add API to retrieve telemetry regions by feature
intel/pmt:
- use a version struct
- use guard(mutex)
- white space cleanup
intel_telemetry:
- Remove unused telemetry_*_events()
- Remove unused telemetry_[gs]et_sampling_period()
- Remove unused telemetry_raw_read_events()
intel/tpmi:
- Get OOBMSM CPU mapping from TPMI
- Relocate platform info to intel_vsec.h
intel/vsec:
- Add device links to enforce dependencies
- Add new Discovery feature
- Add private data for per-device data
- Create wrapper to walk PCI config space
- Set OOBMSM to CPU mapping
- Skip absent features during initialization
- Skip driverless features
lenovo:
- gamezone needs "other mode"
lenovo-yoga-tab2-pro-1380-fastcharger:
- Use devm_pinctrl_register_mappings()
MAINTAINERS:
- Add link to documentation of Intel PMT ABI
Move Lenovo files into lenovo subdir:
- Move Lenovo files into lenovo subdir
oxpec:
- Add support for OneXPlayer X1 Mini Pro (Strix Point)
- Fix turbo register for G1 AMD
samsung-laptop:
- Expose charge_types
silicom:
- remove unnecessary GPIO line direction check
thinklmi:
- improved DMI handling
thinkpad_acpi:
- Handle KCOV __init vs inline mismatches
wmi:
- Fix WMI device naming issue
x86-android-tablets:
- Add generic_lipo_4v2_battery info
- Add ovc-capacity-table info
Merges:
- Merge branch 'fixes' into 'for-next'
- Merge branch 'fixes' into for-next
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaIdbygAKCRBZrE9hU+XO
MbqTAQCqqczU2YXRnq7TIvw/yl40+scIKMXobjX0EEpmgqhlHwEAkWwjQG0ytS2j
hzES5gog1xT6A4TIjVr0Up5MUj3crwU=
=+TRi
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers from Ilpo Järvinen:
- alienware: Add more precise labels to fans
- amd/hsmp: Improve misleading probe errors (make the legacy driver
aware when HSMP is supported through the ACPI driver)
- amd/pmc: Add Lenovo Yoga 6 13ALCL6 to pmc quirk list
- drm/xe: Correct (D)VSEC information to support PMT crashlog feature
- fujitsu: Clamp charge threshold instead of returning an error
- ideapad: Expore change types
- intel/pmt:
- Add PMT Discovery driver
- Add API to retrieve telemetry regions by feature
- Fix crashlog NULL access
- Support Battlemage GPU (BMG) crashlog
- intel/vsec:
- Add Discovery feature
- Add feature dependency support using device links
- lenovo:
- Move lenovo drivers under drivers/platform/x86/lenovo/
- Add WMI drivers for Lenovo Gaming series
- Improve DMI handling
- oxpec:
- Add support for OneXPlayer X1 Mini Pro (Strix Point variant)
- Fix EC registers for G1 AMD
- samsung-laptop: Expose change types
- wmi: Fix WMI device naming issue (same GUID corner cases)
- x86-android-tables: Add ovc-capacity-table to generic battery nodes
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: oxpec: Add support for OneXPlayer X1 Mini Pro (Strix Point)
platform/x86: oxpec: Fix turbo register for G1 AMD
platform/x86/intel/pmt: support BMG crashlog
platform/x86/intel/pmt: use a version struct
platform/x86/intel/pmt: refactor base parameter
platform/x86/intel/pmt: add register access helpers
platform/x86/intel/pmt: decouple sysfs and namespace
platform/x86/intel/pmt: correct types
platform/x86/intel/pmt: re-order trigger logic
platform/x86/intel/pmt: use guard(mutex)
platform/x86/intel/pmt: mutex clean up
platform/x86/intel/pmt: white space cleanup
drm/xe: Correct BMG VSEC header sizing
drm/xe: Correct the rev value for the DVSEC entries
platform/x86/intel/pmt: fix a crashlog NULL pointer access
platform/x86: samsung-laptop: Expose charge_types
platform/x86/amd: pmc: Add Lenovo Yoga 6 13ALC6 to pmc quirk list
platform/x86: dell-uart-backlight: Use blacklight power constant
platform/x86/intel/pmt: fix build dependency for kunit test
platform/x86: lenovo: gamezone needs "other mode"
...
|
||
|
Linus Torvalds
|
f38b751290 |
pwm: Changes for v6.17-rc1
Apart from the usual mix of new drivers (pwm-argon-fan-hat), adding
support for variants to existing drivers, minor improvements to both
drivers and docs, device tree documenation updates, the noteworthy
changes are:
- A pull of pm-runtime-6.17-rc1 to make it possible to apply
|
||
|
Linus Torvalds
|
0262163136 |
spi: Updates for v6.17
This release is almost entirely driver work, mostly new drivers with the
usual smattering of per driver updates anf fixes, with only trivial
changes in the core. Highlights include:
- Quite a bit of maintainence work on the STM32 and Qualcomm drivers.
- Usage of the newly added devm_dma_request_chan() in the ateml driver,
pulling in the relevant dmaengine change.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Support for ADI sigma-delta triggers, Amlogic SPISG, Mediatek MT6991
and MT8196, Renesas RZ/V2H(P) and SOPHGO SG2042.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHa5MACgkQJNaLcl1U
h9DSlAf/YyxtmieKVcrWN9vsfNM6tHWOxLshxoIpkWoab5uVdoLsHQSQzzB76Taz
mBeJAaf0ipLV9b6b9Cl2rZEwWJPg+l3o3KXAbQSQ7bMV/4vUhsFDkXO/nnPd6EmK
ta20i7UpuRKvW55MrzbkJ0+bU1kTVrMxDBR/CJQuF0U+TOUaytpIsZ54nfJ5facq
W4bMNwzpqcxoyk5iR1xQxsu4phPkcL6tQ1XF3MlcTOEOmLxPXNPZX+WDoRYEAuCo
8M6+YyFMFlEgeQGplDhPb3O/KCTdQOhOGXSs0UpeiVVXV6Ozl23GG47wPC79HWRV
+pAPQ8FfUnNDHw0IAaHc9WyF+FVhKQ==
=yjWy
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely driver work, mostly new drivers with
the usual smattering of per driver updates anf fixes, with only
trivial changes in the core. Highlights include:
- Quite a bit of maintainence work on the STM32 and Qualcomm drivers
- Usage of the newly added devm_dma_request_chan() in the ateml
driver, pulling in the relevant dmaengine change
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Support for ADI sigma-delta triggers, Amlogic SPISG, Mediatek
MT6991 and MT8196, Renesas RZ/V2H(P) and SOPHGO SG2042"
* tag 'spi-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (62 commits)
spi: SPISG: Fix less than zero comparison on a u32 variable
spi: intel: Allow writeable MTD partition with module param
spi: Add driver for the RZ/V2H(P) RSPI IP
spi: dt-bindings: Document the RZ/V2H(P) RSPI
MAINTAINERS: Add an entry for Amlogic spi driver
spi: Add Amlogic SPISG driver
spi: dt-bindings: Add binding document of Amlogic SPISG controller
spi: spi-sg2044-nor: Add SPI-NOR controller for SG2042
spi: spi-sg2044-nor: Add configurable chip_info
spi: dt-bindings: spi-sg2044-nor: Change SOPHGO SG2042
spi: spi-qpic-snand: simplify bad block marker duplication
spi: spidev: Add an entry for the ABB spi sensors
dt-bindings: trivial-devices: Document ABB sensors
spi: stm32-ospi: Fix NULL vs IS_ERR() bug in stm32_ospi_get_resources()
spi: gpio: Use explicit 'unsigned int' for parameter types
spi: dt-bindings: spi-mux: Drop "spi-max-frequency" as required
spi: st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
spi: rspi: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
spi: sh-msiof: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
spi: xilinx: Fix block comment style and minor cleanups
...
|
||
|
Linus Torvalds
|
bf977a9ad3 |
regulator: Updates for v6.17
The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the vast
majority of consumers. Otherwise it's been quite quiet, a few new
devices supported, plus some cleanups and fixes.
- Basic Rust bindings.
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we just
got as close as we could in one step.
- Cleanups of our usage of the PM autosuspend functions, this pulls in
some PM core changes on a shared tag.
- Mode setting support for PCA9450.
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1.
The TI driver pulls in the MFD portion of the support for the device and
the pinctrl driver which was in the same tag.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHaHcACgkQJNaLcl1U
h9Dw7Af9HSpY+r/dZzBN1wGky4Yd40tRKP5u5HzHc9T+gG8716wr/KE4SrMIWHax
8SIiKZDC/Bu2kj3D4xaJrb6a8M0AIpRS3IwAbLWqkJ9jPF2082tp+GwbJqI045Ix
ZAWJVUEYQyJ3wwyD0ZG/peCAGvKBgCCn0NGn7KUnAk9QrsiTq8GqDgZPWcKRzXPV
t9twib6J/NAL6I8PKfXnuQNwA9Td79SBySKRY4UgceQtUJgzyBo8UbqMrBuZOY7j
FvxfkYSryDDdEpRMRsczYk+jYjwQVzIa8g4B1C9EF2g5pvWg61PXNX+G2qDkeUbL
XR1gloyJExnlyAXoVY2bg+cSzd2ffQ==
=GAr4
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The big change in this release is the addition of Rust bindings from
Daniel Almeida, allowing fairly basic consumer use with support for
enable and voltage setting operations. This should be good for the
vast majority of consumers.
Otherwise it's been quite quiet, a few new devices supported, plus
some cleanups and fixes.
Summary:
- Basic Rust bindings
- A fix for making large voltage changes on regulators where we limit
the size of voltage change we will do in one step, previously we
just got as close as we could in one step
- Cleanups of our usage of the PM autosuspend functions, this pulls
in some PM core changes on a shared tag
- Mode setting support for PCA9450
- Support for Mediatek MT6893 and MT8196 DVFSRC, Qualcomm PM7550 and
PMR735B, Raspberry Pi displays and TI TPS652G1
The TI driver pulls in the MFD portion of the support for the device
and the pinctrl driver which was in the same tag"
* tag 'regulator-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (40 commits)
regulator: mt6370: Fix spelling mistake in mt6370_regualtor_register
regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"
regulator: core: repeat voltage setting request for stepped regulators
regulator: rt6160: Add rt6166 vout min_uV setting for compatible
MAINTAINERS: add regulator.rs to the regulator API entry
rust: regulator: add a bare minimum regulator abstraction
regulator: tps6286x-regulator: Fix a copy & paste error
regulator: qcom-rpmh: add support for pm7550 regulators
regulator: qcom-rpmh: add support for pmr735b regulators
regulator: dt-bindings: qcom,rpmh: Add PMR735B compatible
regulator: dt-bindings: qcom,rpmh: Add PM7550 compatible
regulator: tps6594-regulator: Add TI TPS652G1 PMIC regulators
regulator: tps6594-regulator: refactor variant descriptions
regulator: tps6594-regulator: remove hardcoded buck config
regulator: tps6594-regulator: remove interrupt_count
dt-bindings: mfd: ti,tps6594: Add TI TPS652G1 PMIC
pinctrl: pinctrl-tps6594: Add TPS652G1 PMIC pinctrl and GPIO
misc: tps6594-pfsm: Add TI TPS652G1 PMIC PFSM
mfd: tps6594: Add TI TPS652G1 support
regulator: sy8827n: make enable gpio NONEXCLUSIVE
...
|
||
Priyanka Dandamudi
|
4df0bd5eb4 |
drm/xe/uapi: Add documentation for DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING
Add documentation for drm_xe_gem_create structure flag DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING. v2: Modified to be in a more generalised way. Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250728043336.3319521-1-priyanka.dandamudi@intel.com Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com> |
||
|
Linus Torvalds
|
5339a2aefc |
regmap: Updates for v6.17
A very quiet release for regmap this time, just two cleanup patches and
one almost cleanup patch which saves individual MMIO regmaps flagging
themselves as having fast I/O.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmiHZLAACgkQJNaLcl1U
h9B/wwgAgBT89u9tOn21YaAz+wFIT5e8Ri/Id15lJHiabLJNhZtlbwajgXU8Rtl6
weTCCylI1jDkKX9rGXIKE3wz31rGD19saZjLEaZqPDgKTq6dkXByGKdFa31cJ+hs
FGPBUOGuOMJCMlKm1leLQbPj9mYX1hGQA6bD0uZHfjhnP+eX8FlqgmQ2/Ssk9Nwm
V816pTgr14z2mbfMZRFC/UjXVFDWQy9JGRFvWcb1y9S3ZNVZ+kelu5oTyaNgtfkx
+rCjPrPEvoYLnYHSTXsclXegRi71RYOF7Hoc2c3Tlen5vIL0+cY5kqLlA0b3MrT3
0NDg2O/49PyQlbYLfB0cq0eE3/nFvg==
=1gmK
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A very quiet release for regmap this time, just two cleanup patches
and one almost cleanup patch which saves individual MMIO regmaps
flagging themselves as having fast I/O"
* tag 'regmap-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Annotate that MMIO implies fast IO
regmap: get rid of redundant debugfs_file_{get,put}()
regmap: kunit: Constify regmap_range_cfg array
|
||
|
Linus Torvalds
|
ffec878fa5 |
power sequencing updates for v6.17-rc1
New drivers:
- add a power sequencing driver for the T-HEAD TH1520 GPU
Power sequencing core improvements:
- allow to compile the pwrseq drivers with COMPILE_TEST=y in order to
improve the build-test coverage
- add named defines for the possible return values of the .match()
callback and use it in the existing drivers instead of magic values
Fixes:
- Fix the name of the bluetooth-enable unit for WCN6855
-----BEGIN PGP SIGNATURE-----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=qc2Z
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and a small set of improvements as well as a fix to
power sequence unit naming.
New driver:
- add a power sequencing driver for the T-HEAD TH1520 GPU
Power sequencing core improvements:
- allow to compile the pwrseq drivers with COMPILE_TEST=y in order to
improve the build-test coverage
- add named defines for the possible return values of the .match()
callback and use it in the existing drivers instead of magic values
Fix:
- Fix the name of the bluetooth-enable unit for WCN6855"
* tag 'pwrseq-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix bluetooth-wifi copypasta for WCN6855
power: sequencing: thead-gpu: use new defines for match() return values
power: sequencing: qcom-wcn: use new defines for match() return values
power: sequencing: add defines for return values of the match() callback
power: sequencing: extend build coverage with COMPILE_TEST=y
power: sequencing: thead-gpu: add missing header
power: sequencing: Add T-HEAD TH1520 GPU power sequencer driver
|
||
|
Linus Torvalds
|
fcb117e075 |
gpio updates for v6.17-rc1
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose the
global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the existing
interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more users
- start the process of allowing to compile-out the legacy parts of the
GPIO core for users who don't need it by introducing a new Kconfig
option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio helper
out of the core struct gpio_chip into their own structure that wraps
it: create a new header with modern interfaces and convert several
drivers to using it
- remove the platform data structure associated with the gpio-mmio helper
from the kernel after having converted all remaining users to generic
device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value setter
callbacks
- convert gpio-rcar to using simple device power management ops callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already handles
that
- also drop unneeded GPIO range checks in drivers, the core already makes
sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the user
wants to change direction of the pin to output even though these
drivers don't need to do anything else to actually set the direction,
otherwise a call like gpiod_direction_output(d, 1) will not result in
the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases where
the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different devices
to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of simple
hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the arguments
in some functions, remove duplicate includes, etc.
- documentation updates
-----BEGIN PGP SIGNATURE-----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=tUPm
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver (Apple SMC) and extensions to existing drivers
for supporting new HW models. A lot of different impovements across
drivers and in core GPIO code. Details on that are in the signed tag
as usual.
We managed to remove some of the legacy APIs. Arnd Bergmann started to
work on making the legacy bits optional so that we may compile them
only for older platforms that still really need them.
Rob Herring has done a lot of work to convert legacy .txt dt-bindings
for GPIO controllers to YAML. There are only a few left now in the
GPIO tree.
A big part of the commits in this PR concern the conversion of GPIO
drivers to using the new line value setter callbacks. This conversion
is now complete treewide (unless I've missed something) and once all
the changes from different trees land in mainline, I'll send you
another PR containing a commit dropping the legacy callbacks from the
tree.
As the quest to pay back technical dept never really ends, we're
starting another set of interface conversions, this time it's about
moving fields specific to only a handful of drivers using the
gpio-mmio helper out of the core gpio_chip structure that every
controller implements and uses. This cycle we introduce a new set of
APIs and convert a few drivers under drivers/gpio/, next cycle we'll
convert remaining modules treewide (in gpio, pinctrl and mfd trees)
and finally remove the old interfaces and move the gpio-mmio fields
into their own structure wrapping gpio_chip.
One last change I should mention here is the rework of the sysfs
interface. In 2016, we introduced the GPIO character device as the
preferred alternative to the sysfs class under /sys/class/gpio. While
it has seen a wide adoption with the help of its user-space
counterpart - libgpiod - there are still users who prefer the
simplicity of sysfs.
As far as the GPIO subsystem is concerned, the problem is not the
existince of the GPIO class as such but rather the fact that it
exposes the global GPIO numbers to the user-space, stopping us from
ever being able to remove the numberspace from the kernel. To that
end, this release we introduced a parallel, limited sysfs interface
that doesn't expose these numbers and only implements a subset of
features that are relevant to the existing users. This is a result of
several discussions over the course of last year and should allow us
to remove the legacy part some time in the future.
Summary:
GPIOLIB core:
- introduce a parallel, limited sysfs user ABI that doesn't expose
the global GPIO numbers to user-space while maintaining backward
compatibility with the end goal of it completely replacing the
existing interface, allowing us to remove it
- remove the legacy devm_gpio_request() routine which has no more
users
- start the process of allowing to compile-out the legacy parts of
the GPIO core for users who don't need it by introducing a new
Kconfig option: GPIOLIB_LEGACY
- don't use global GPIO numbers in debugfs output from the core code
(drivers still do it, the work is ongoing)
- start the process of moving the fields specific to the gpio-mmio
helper out of the core struct gpio_chip into their own structure
that wraps it: create a new header with modern interfaces and
convert several drivers to using it
- remove the platform data structure associated with the gpio-mmio
helper from the kernel after having converted all remaining users
to generic device properties
- remove legacy struct gpio definition as it has no more users
New drivers:
- add the GPIO driver for the Apple System Management Controller
Driver improvements:
- add support for new models to gpio-adp5585, gpio-tps65219 and
gpio-pca953x
- extend the interrupt support in gpio-loongson-64bit
- allow to mark the simulated GPIO lines as invalid in gpio-sim
- convert all remaining GPIO drivers to using the new GPIO value
setter callbacks
- convert gpio-rcar to using simple device power management ops
callbacks
- don't check if current direction of a line is output before setting
the value in gpio-pisosr and ti-fpc202: the GPIO core already
handles that
- also drop unneeded GPIO range checks in drivers, the core already
makes sure we're within bounds when calling driver callbacks
- use dev_fwnode() where applicable across GPIO drivers
- set line value in gpio-zynqmp-modepin and gpio-twl6040 when the
user wants to change direction of the pin to output even though
these drivers don't need to do anything else to actually set the
direction, otherwise a call like gpiod_direction_output(d, 1) will
not result in the line driver high
- remove the reduntant call to pm_runtime_mark_last_busy() from
gpio-arizona
- use lock guards in gpio-cadence and gpio-mxc
- check the return values of regmap functions in gpio-wcd934x and
gpio-tps65912
- use better regmap interfaces in gpio-wcove and gpio-pca953x
- remove dummy GPIO chip callbacks from several drivers in cases
where the GPIO core can already handle their absence
- allow building gpio-palmas as a module
Fixes:
- use correct bit widths (according to the documentation) in
gpio-virtio
Device-tree bindings:
- convert several of the legacy .txt documents for many different
devices to YAML, improving automatic validation
- create a "trivial" GPIO DT schema that covers a wide range of
simple hardware that share a set of basic GPIO properties
- document new HW: Apple MAC SMC GPIO block and adp5589 I/O expander
- document a new model for pca95xx
- add and/or remove properties in YAML documents for gpio-rockchip,
fsl,qoriq-gpio, arm,pl061 and gpio-xilinx
Misc:
- some minor refactoring in several places, adding/removing forward
declarations, moving defines to better places, constify the
arguments in some functions, remove duplicate includes, etc.
- documentation updates"
* tag 'gpio-updates-for-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (202 commits)
MIPS: alchemy: gpio: use new GPIO line value setter callbacks for the remaining chips
gpiolib: enable CONFIG_GPIOLIB_LEGACY even for !GPIOLIB
gpio: virtio: Fix config space reading.
gpiolib: make legacy interfaces optional
dt-bindings: gpio: rockchip: Allow use of a power-domain
gpiolib: of: add forward declaration for struct device_node
power: reset: macsmc-reboot: Add driver for rebooting via Apple SMC
gpio: Add new gpio-macsmc driver for Apple Macs
mfd: Add Apple Silicon System Management Controller
soc: apple: rtkit: Make shmem_destroy optional
dt-bindings: mfd: Add Apple Mac System Management Controller
dt-bindings: power: reboot: Add Apple Mac SMC Reboot Controller
dt-bindings: gpio: Add Apple Mac SMC GPIO block
gpio: cadence: Remove duplicated include in gpio-cadence.c
gpio: tps65219: Add support for TI TPS65214 PMIC
gpio: tps65219: Update _IDX & _OFFSET macro prefix
gpio: sysfs: Fix an end of loop test in gpiod_unexport()
dt-bindings: gpio: Convert qca,ar7100-gpio to DT schema
dt-bindings: gpio: Convert maxim,max3191x to DT schema
dt-bindings: gpio: fsl,qoriq-gpio: Add missing mpc8xxx compatibles
...
|
||
|
Linus Torvalds
|
177bf8620c |
sound updates for 6.17-rc1
This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the PM
tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays
-----BEGIN PGP SIGNATURE-----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=Wr97
-----END PGP SIGNATURE-----
Merge tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This includes lots of file shuffling due to HD-audio code
reorganization and many trivial changes, but otherwise there shouldn't
be much surprise from the functionality POV. The PR includes the PM
changes as prerequisite, too. Some highlights below:
Core:
- Performance optimizations in PCM core code
- Refactoring of ASoC Kconfig menus to be hopefully more consistant
and easier to navigate.
- Refactoring of ASoC DAPM code, mainly hiding functionality that
doesn't need to be exposed to drivers
HD-audio reorganization:
- All code are moved under sound/hda with a bit more understandable
tree structure, as well as file renames
- The huge Realtek driver code is split to several parts, a common
helper module with driver modules per probe entry
- HDMI and Cirrus codec drivers also split
ASoC:
- Further work on the generic handling for SoundWire SDCA devices
- Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5,
various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI
TAS5753
HD-audio and USB-audio:
- TAS2781 driver cleanup and TAS2770 support
- EQ enablement in CA0132 driver
- USB audio quirk code cleanups
Others:
- Cleanups of PM autosuspend call patterns with the update from the
PM tree
- Lots of strcpy() -> strscpy() conversions for fixed size arrays"
* tag 'sound-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (385 commits)
ALSA: hda: Add TAS2770 support
ASoC: qcom: sm8250: Add Fairphone 4 soundcard compatible
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 4 sound card
ASoC: dt-bindings: qcom,q6afe: Document q6usb subnode
ASoC: SDCA: Fix implicit cast from le16
ASoC: SDCA: Shrink detected_mode_handler() stack frame
ASoC: SDCA: Check devm_mutex_init() return value
ASoC: SDCA: add route by the number of input pins in MU entity
ALSA: hda/realtek: Add support for ASUS Commercial laptops using CS35L41 HDA
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for PTL.
ASoC: codec: tlv320aic32x4: Fix reset GPIO check
ASoC: dt-bindings: qcom,lpass-va-macro: Define clock-names in top-level
ASoC: SDCA: Add hw_params() helper function
ASoC: SDCA: Add a helper to get the SoundWire port number
ASoC: SDCA: Add helper to add DAI constraints
ASoC: soc-dai: Add private data to snd_soc_dai
ASoC: SDCA: Move SDCA search functions and export
ASoC: SDCA: Remove overly chatty input pin list warning
ASoC: SDCA: Allow read-only controls to be deferrable
ASoC: SDCA: Update memory allocations to zero initialise
...
|
||
|
Linus Torvalds
|
e30fc09082 |
Thermal control updates for 6.17-rc1
- Convert EAGAIN into ENODATA in temp_show() to prevent user space from
polling the sysfs file in vain after a failing O_NONBLOCK read under
the assumption that the read would have blocked (Hsin-Te Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal driver
(Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the firmware
in the Intel platform temperature control (PTC) interface and add a
new sysfs control attribute called thermal_tolerance to it (Srinivas
Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with
a new initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT bindings
(Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver (Aaron
Kling)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/j4ESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1r54IAImMVSzbSfMvvB0b1PDa2nEbBVt8xNEg
2BPwZv1CrdJXq95VJQDJQRmsdZVzzNIL0gRruyaXnSDa4zhyoNb3nXhjY7eNqhlP
2CBANscs7zgQ3DiAFuz3VJ7ns10KCAAEj2r3gdTxkm0MveOrDhOn3bLdr9+NN7P8
n0zo9p4W2RDXXXjTMJul0qliZpJoadDqN+fl2V/u7vPLcjlp1JBV84sZPKt8mGIe
o44Sp9NSjZ20GDpOPzXKJnK9RRQsxxs40x4d3C3kpmiagzMjyV3ku1K2e0FAucUv
Y0V91HiHCgdNSLa/Z4laIdFJc6Wa8tsEb7mItg96cPFmSCaFvcZPucM=
=ysPD
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These update the thermal control sysfs interface and multiple thermal
control drivers:
- Convert EAGAIN into ENODATA in temp_show() to prevent user space
from polling the sysfs file in vain after a failing O_NONBLOCK read
under the assumption that the read would have blocked (Hsin-Te
Yuan)
- Add Wildcat Lake PCI ID to the int340x Intel processor thermal
driver (Srinivas Pandruvada)
- Add debugfs interface to override the temperature set by the
firmware in the Intel platform temperature control (PTC) interface
and add a new sysfs control attribute called thermal_tolerance to
it (Srinivas Pandruvada)
- Enable the stage 2 shutdown in the qcom-spmi-temp-alarm thermal
driver and add support for more SPMI variants to it (Anjelique
Melendez)
- Constify the thermal_zone_device_ops structure where possible in
several assorted thermal drivers (Christophe Jaillet)
- Use the dev_fwnode() helper instead of of_fwnode_handle(), as it is
more adequate, wherever possible in thermal drivers (Jiri Slaby)
- Implement and document One-Time Programmable fuse support in the
Rockchip thermal driver in order to increase the precision of the
measurements (Nicolas Frattaroli)
- Change the way the Mediatek LTVS thermal driver stores the
initialization data sequence to support different sequences
matching different platforms. Introduce mt7988 support with a new
initialization sequence (Mason Chang)
- Document the QCom TSens Milos Temperature Sensor DT bindings (Luca
Weiss)
- Add the fallback compatible string for MT7981 and MT8516 DT
bindings (Aleksander Jan Bajkowski)
- Add the compatible string for the Tegra210B01 SOC_THERM driver
(Aaron Kling)"
* tag 'thermal-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
dt-bindings: thermal: tegra: Document Tegra210B01
dt-bindings: thermal: mediatek: Add fallback compatible string for MT7981 and MT8516
dt-bindings: thermal: qcom-tsens: document the Milos Temperature Sensor
thermal/drivers/mediatek/lvts_thermal: Add mt7988 lvts commands
thermal/drivers/mediatek/lvts_thermal: Add lvts commands and their sizes to driver data
thermal/drivers/mediatek/lvts_thermal: Change lvts commands array to static const
thermal/drivers/rockchip: Support reading trim values from OTP
dt-bindings: thermal: rockchip: document otp thermal trim
thermal/drivers/rockchip: Support RK3576 SoC in the thermal driver
dt-bindings: rockchip-thermal: Add RK3576 compatible
thermal/drivers/rockchip: Rename rk_tsadcv3_tshut_mode
thermal: Use dev_fwnode()
thermal: Constify struct thermal_zone_device_ops
thermal/drivers/loongson2: Constify struct thermal_zone_device_ops
thermal/drivers/qcom-spmi-temp-alarm: Add support for LITE PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 2 PMIC peripherals
thermal/drivers/qcom-spmi-temp-alarm: Prepare to support additional Temp Alarm subtypes
thermal/drivers/qcom-spmi-temp-alarm: Add temp alarm data struct based on HW subtype
thermal/drivers/qcom-spmi-temp-alarm: Enable stage 2 shutdown when required
thermal: sysfs: Return ENODATA instead of EAGAIN for reads
...
|
||
|
Linus Torvalds
|
9bbf8e17d8 |
ACPI updates for 6.17-rc1
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface (Andy
Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver to
avoid using memory that contains leftover data (Sebastian Ott)
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li)
- Fix message formatting in the ACPI processor throttling driver and
in the ACPI PCI link driver (Colin Ian King)
- Clean up general ACPI PM domain handling (Rafael Wysocki)
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver (Dan
Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records and other ACPI-related information in
MAINTAINERS as well as the contact information in the ACPI ABI
documentation (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to the
ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
- Fix typos in ACPI documentation and comments (Bjorn Helgaas)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/qzQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1wMgH/2vklBeGYjxSIIn0qfiv/SnSW5B1jEE4
5vDuCpafesm7tZtwFB9v2mRf/8SvmJey2jfYgGnBMBlTW0JUP8eCVpRASvx1SCGH
QwJFN3GCs3IjIvT2KlXeDIyQdfITIl3SNTXwTFl/ezYT0vo7VBeFtofeL9szaxlP
rM1KeLE7lksjY9djT8PRwxOQ+EzuJ8uUGXYcHu797u0x5XB9ZiBDuKqngDicQONI
DaRU3zXwOKPkQhldFN+9HPsDPvm7+8f1yiOEWzLnToTDggQDH4x2wdXJOOpAogoN
qIYBIZG90drNj9USsWZvp0q/fT3OVbuHLuruDGieOCYUByBYddY9WHM=
=5h+J
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update APEI (new EINJv2 error injection, assorted fixes), fix
the ACPI processor driver, update the legacy ACPI /proc interface
(multiple assorted fixes of minor issues) and several assorted ACPI
drivers (minor fixes and cleanups):
- Printing the address in acpi_ex_trace_point() is either incorrect
during early kernel boot or not really useful later when pathnames
resolve properly, so stop doing it (Mario Limonciello)
- Address several minor issues in the legacy ACPI proc interface
(Andy Shevchenko)
- Fix acpi_object union initialization in the ACPI processor driver
to avoid using memory that contains leftover data (Sebastian Ott)
- Make the ACPI processor perflib driver take the initial _PPC limit
into account as appropriate (Jiayi Li)
- Fix message formatting in the ACPI processor throttling driver and
in the ACPI PCI link driver (Colin Ian King)
- Clean up general ACPI PM domain handling (Rafael Wysocki)
- Fix iomem-related sparse warnings in the APEI EINJ driver (Zaid
Alali, Tony Luck)
- Add EINJv2 error injection support to the APEI EINJ driver (Zaid
Alali)
- Fix memory corruption in error_type_set() in the APEI EINJ driver
(Dan Carpenter)
- Fix less than zero comparison on a size_t variable in the APEI EINJ
driver (Colin Ian King)
- Fix check and iounmap of an uninitialized pointer in the APEI EINJ
driver (Colin Ian King)
- Add TAINT_MACHINE_CHECK to the GHES panic path in APEI to improve
diagnostics and post-mortem analysis (Breno Leitao)
- Update APEI reviewer records and other ACPI-related information in
MAINTAINERS as well as the contact information in the ACPI ABI
documentation (Rafael Wysocki)
- Fix the handling of synchronous uncorrected memory errors in APEI
(Shuai Xue)
- Remove an AudioDSP-related ID from the ACPI LPSS driver (Andy
Shevchenko)
- Replace sprintf()/scnprintf() with sysfs_emit() in the ACPI fan
driver and update a debug message in fan_get_state_acpi4() (Eslam
Khafagy, Abdelrahman Fekry, Sumeet Pawnikar)
- Add Intel Wildcat Lake support to the ACPI DPTF driver (Srinivas
Pandruvada)
- Add more debug information regarding failing firmware updates to
the ACPI pfr_update driver (Chen Yu)
- Reduce the verbosity of the ACPI PRM (platform runtime mechanism)
driver to avoid user confusion (Zhu Qiyu)
- Replace sprintf() with sysfs_emit() in the ACPI TAD (time and alarm
device) driver (Sukrut Heroorkar)
- Enable CONFIG_ACPI_DEBUG by default to make it easier to get ACPI
debug messages from OEM platforms (Mario Limonciello)
- Fix parent device references in ASL examples in the ACPI
documentation and fix spelling and style in the gpio-properties
documentation in firmware-guide (Andy Shevchenko)
- Fix typos in ACPI documentation and comments (Bjorn Helgaas)"
* tag 'acpi-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
ACPI: Fix typos
ACPI/PCI: Remove space before newline
ACPI: processor: throttling: Remove space before newline
ACPI: processor: perflib: Fix initial _PPC limit application
ACPI/PNP: Use my kernel.org address in MAINTAINERS and ABI docs
ACPI: TAD: Replace sprintf() with sysfs_emit()
ACPI: APEI: handle synchronous exceptions in task work
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
ACPI: APEI: MAINTAINERS: Update reviewers for APEI
Documentation: ACPI: Fix parent device references
ACPI: fan: Update debug message in fan_get_state_acpi4()
ACPI: PRM: Reduce unnecessary printing to avoid user confusion
ACPI: fan: Replace sprintf() with sysfs_emit()
ACPI: APEI: EINJ: Fix trigger actions
ACPI: processor: fix acpi_object initialization
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path
ACPI: LPSS: Remove AudioDSP related ID
Documentation: firmware-guide: gpio-properties: Spelling and style fixes
ACPI: fan: Replace sprintf()/scnprintf() with sysfs_emit() in show() functions
ACPI: PM: Set .detach in acpi_general_pm_domain definition
...
|
||
|
Linus Torvalds
|
53edfecef6 |
Power management updates for 6.17-rc1
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant
Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle
driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the device
suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/wC4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1O6MIAJtfclAleksv+PzbEyC+yk72zKinJg35
WJUk4Kz1yMOqAPazbpXRXt1tuxqyB3HWeixnTFyZbz+bbhZjYJ0lvpWGkdsFaS0i
NSbILSpHNGtOrP6s6hVKTBmLAdAzdWYWMQizlWgGrkhOiN5BnQzL7pAi2aGqu9KS
tGqnIg/3QwBAvnxijgpkm7qozOUMPJ9dzSvxMaFeB6JH7SNbTOODVFtsoD+mbJlH
YVMMWxih8b4MRJgAo4N2bL1Glp/Qnwg4ACawnQokt8Rknbtwku57QF9YwTbubr36
Ok7qbNnUSx0h9KtMQQNogLLkFreTJkbGknVWEwaWWhXNeW9l4cr6MWo=
=xVF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
|
||
Alexei Starovoitov
|
cd7c97f458 |
Merge branch 'bpf-show-precise-rejected-function-when-attaching-to-__noreturn-and-deny-list-functions'
KaFai Wan says: ==================== bpf: Show precise rejected function when attaching to __noreturn and deny list functions Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions. Add log for attaching tracing programs to functions in deny list. Add selftest for attaching tracing programs to functions in deny list. Migrate fexit_noreturns case into tracing_failure test suite. changes: v4: - change tracing_deny case attaching function (Yonghong Song) - add Acked-by: Yafang Shao and Yonghong Song v3: - add tracing_deny case into existing files (Alexei) - migrate fexit_noreturns into tracing_failure - change SOB https://lore.kernel.org/bpf/20250722153434.20571-1-kafai.wan@linux.dev/ v2: - change verifier log message (Alexei) - add missing Suggested-by https://lore.kernel.org/bpf/20250714120408.1627128-1-mannkafai@gmail.com/ v1: https://lore.kernel.org/all/20250710162717.3808020-1-mannkafai@gmail.com/ --- ==================== Link: https://patch.msgid.link/20250724151454.499040-1-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
KaFai Wan
|
51d3750aba |
selftests/bpf: Migrate fexit_noreturns case into tracing_failure test suite
Delete fexit_noreturns.c files and migrate the cases into tracing_failure.c files. The result: $ tools/testing/selftests/bpf/test_progs -t tracing_failure/fexit_noreturns #467/4 tracing_failure/fexit_noreturns:OK #467 tracing_failure:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-5-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
KaFai Wan
|
a32f6f17a7 |
selftests/bpf: Add selftest for attaching tracing programs to functions in deny list
The result: $ tools/testing/selftests/bpf/test_progs -t tracing_failure/tracing_deny #468/3 tracing_failure/tracing_deny:OK #468 tracing_failure:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-4-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
KaFai Wan
|
863aab3d4d |
bpf: Add log for attaching tracing programs to functions in deny list
Show the rejected function name when attaching tracing programs to functions in deny list. With this change, we know why tracing programs can't attach to functions like __rcu_read_lock() from log. $ ./fentry libbpf: prog '__rcu_read_lock': BPF program load failed: -EINVAL libbpf: prog '__rcu_read_lock': -- BEGIN PROG LOAD LOG -- Attaching tracing programs to function '__rcu_read_lock' is rejected. Suggested-by: Leon Hwang <leon.hwang@linux.dev> Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-3-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
KaFai Wan
|
a5a6b29a70 |
bpf: Show precise rejected function when attaching fexit/fmod_ret to __noreturn functions
With this change, we know the precise rejected function name when attaching fexit/fmod_ret to __noreturn functions from log. $ ./fexit libbpf: prog 'fexit': BPF program load failed: -EINVAL libbpf: prog 'fexit': -- BEGIN PROG LOAD LOG -- Attaching fexit/fmod_ret to __noreturn function 'do_exit' is rejected. Suggested-by: Leon Hwang <leon.hwang@linux.dev> Signed-off-by: KaFai Wan <kafai.wan@linux.dev> Acked-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20250724151454.499040-2-kafai.wan@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Damien Le Moal
|
a2f54ff15c |
scsi: core: sysfs: Correct sysfs attributes access rights
The SCSI sysfs attributes "supported_mode" and "active_mode" do not define a store method and thus cannot be modified. Correct the DEVICE_ATTR() call for these two attributes to not include S_IWUSR to allow write access as they are read-only. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org Reviewed-by: John Garry <john.g.garry@oracle.com> Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> |
||
|
Linus Torvalds
|
ae388edd4a |
Landlock update for v6.17-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaINQ2hAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbS8DcA/RvnXD7NcvINU94pkY6w+SxtdhsIe/w7EcGF LJdwxrKQAP0WpMNTfKdzfe6ub7qE+AkZYhagKAuMCloS1qE35nZgDg== =WKRS -----END PGP SIGNATURE----- Merge tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock update from Mickaël Salaün: "Fix test issues, improve build compatibility, and add new tests" * tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Fix cosmetic change samples/landlock: Fix building on musl libc landlock: Fix warning from KUnit tests selftests/landlock: Add test to check rule tied to covered mount point selftests/landlock: Fix build of audit_test selftests/landlock: Fix readlink check |
||
Eric Biggers
|
b90bb6dbf1 |
ipe: use SHA-256 library API instead of crypto_shash API
audit_policy() does not support any other algorithm, so the crypto_shash abstraction provides no value. Just use the SHA-256 library API instead, which is much simpler and easier to use. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Fan Wu <wufan@kernel.org> |
||
|
Linus Torvalds
|
e833f7dfe3 |
audit/stable-6.17 PR 20250725
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmiD0Y4UHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNc3RAAnLjNithviO7pal68D+4oZDvAhh7S B1zH3hS9mcRZtDa0ZwdzxlzZm0qacpZZgqha3vAPCnke/nYlnCJa8Iz6XzRYw1Dy dHVa9W/F53KZgUIaI3FIuMN9aaO8bjZFJLHMtjZyL+DjmIoOfDBE1b1wdgqDFOI6 bx2czQaRP/3dP9xFRlTxDviMJXBajonvUZaOOTd/2kHaHRNSSjEja1zE0E4CVKTd 6eMT3Oj1wjVJWIVgGd5BkuXTa1aSWNu2qYrigL8572VeIllv9yZQvJEaypmmicTD XL7aAdYYitTPOL9KGxANmCOfKfan2JYDPqWBhm+UjlKXq4PYbw0zgEYniJ6wmYkq LDKOc+Is3QbkPCxbIxu11pugcIUlI8Kzy43bd2SwrpVqXAB378eFqmUkLEohSxaj TVnW/r+GMh3dx8Rsig0XenhlKvJLKJrPHHRgJ2Kob4aPf2917VX/HRngqwJ6V8C4 p4jhcky8f5/XwcBmZBt8xYuHDY7QCe1U9dwYjjrm6szzDnPrMv1lupxn55C/Bton wdlNHk/2199aguWkSAchJlPXE64eam+G88KGjxxCW5jQmbQU8myOrqipf1lxavyp sDlve5f1mhgeV6ZoZzJkiRUKSz5VvMKoiook8hfyj3rRtzh1Kz5J0ojFaPH46keA ixmmkpn6Ydw7yV8= =fLqm -----END PGP SIGNATURE----- Merge tag 'audit-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit update from Paul Moore: "A single audit patch that restores logging of an audit event in the module load failure case" * tag 'audit-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit,module: restore audit logging in load failure case |
||
|
Linus Torvalds
|
dffb641bea |
selinux/stable-6.17 PR 20250725
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmiD08EUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXOFzRAAwTbLKcFggDs0bG6AfqT5KCQHRtRW z/0+kvDZeKzJvmJ4XvNMdW3orC2iIYgGCYJgj8umEXh1BOGIOSd4edpGaUKvJB9Z S4py0I3udGjlchInmDBZqW2qGaN0EAl/s0AWBbf6QLYmMV1r9+nb5lH71pVBbEQv 4Vltg61KkQPc6PuDpk7F+BD7yYKSCqxxWyy7zEJsFMntg4jCyoI2PfRhrHM5xuCE RRqctblhCc4nNqzhPvse4Vt9PD+cVQx0Pi7arxvSD8M7mVrFTsUV17OoSKlCcLGh 1LlFk7heoDNC/UQy7xFg5hsy8GeI6gYYY/Fomu7Ue3SYJL2fqqr7xsbJyCCNg8kC S17gRPBxqftzl/2SE76V8y5toIRMtT7b+6aXudtukfFbxtBq09XNflq1G3iR9fTo o6f9MGpyWW3t/e8wk2yPYfXNXrLe3yJoxV6lIsDaHejOwGi098ArcahKKuxNzRit AikIoqn8GEO+j3/X/4YS1xbdS/HkG7N3t+Rbr2GNO4XsmU6iqZRBkmz5UlCcL8u1 OTQNjzqqSy/DKAfrPAyqN7wiBVXt5siBPwAXIcPbh9JfAI/kRN7LUxAQeGnUps+o kJn2zCV3G4kD2qtCVCQ7VifIYGCMxa1PTYsiwu5S4Wgm1Ducvtsx4r3TVKiCuObC bwv/1k9kpkvLy/E= =M55j -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Introduce the concept of a SELinux "neveraudit" type which prevents all auditing of the given type/domain. Taken by itself, the benefit of marking a SELinux domain with the "neveraudit" tag is likely not very interesting, especially given the significant overlap with the "dontaudit" tag. However, given that the "neveraudit" tag applies to *all* auditing of the tagged domain, we can do some fairly interesting optimizations when a SELinux domain is marked as both "permissive" and "dontaudit" (think of the unconfined_t domain). While this pull request includes optimized inode permission and getattr hooks, these optimizations require SELinux policy changes, therefore the improvements may not be visible on standard downstream Linux distos for a period of time. - Continue the deprecation process of /sys/fs/selinux/user. After removing the associated userspace code in 2020, we marked the /sys/fs/selinux/user interface as deprecated in Linux v6.13 with pr_warn() and the usual documention update. This adds a five second sleep after the pr_warn(), following a previous deprecation process pattern that has worked well for us in the past in helping identify any existing users that we haven't yet reached. - Add a __GFP_NOWARN flag to our initial hash table allocation. Fuzzers such a syzbot often attempt abnormally large SELinux policy loads, which the SELinux code gracefully handles by checking for allocation failures, but not before the allocator emits a warning which causes the automated fuzzing to flag this as an error and report it to the list. While we want to continue to support the work done by the fuzzing teams, we want to focus on proper issues and not an error case that is already handled safely. Add a NOWARN flag to quiet the allocator and prevent syzbot from tripping on this again. - Remove some unnecessary selinuxfs cleanup code, courtesy of Al. - Update the SELinux in-kernel documentation with pointers to additional information. * tag 'selinux-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: don't bother with selinuxfs_info_free() on failures selinux: add __GFP_NOWARN to hashtab_init() allocations selinux: optimize selinux_inode_getattr/permission() based on neveraudit|permissive selinux: introduce neveraudit types documentation: add links to SELinux resources selinux: add a 5 second sleep to /sys/fs/selinux/user |
||
|
Linus Torvalds
|
30b9dcae98 |
lsm/stable-6.17 PR 20250725
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmiD1VgUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPBEQ/+NOqcHL1p/SRq5Y4gDraovaI3Eyy4 /gLQbsWn/16B4UGYzOaF3iKRUgs00blCMrIU6hXPkm7kuklrfhuiT+fgWq91JHBB ihtrQl77KCCL6pJWBNyrBhvpcOG3WrUvAurOPOz5pWB8dELiloMenbHI70HIy9wb uy6N7aOBMfg1NlVWbo4weghhc3Wwtpc0+iDsII8aW4PNmO5ngYJ/IIseh453vzPg zFNQFyc10NFVLo6UNao3FRVTvclrdexEvIoNgWvA5WqNoD948qbY2IuQjuRhlqB9 ZtMeiBTcmJFLO83RqM+d8MbQK5W2dA8NRRJ0H7+DC6lCHGjaqS+Qhy+19DVI5K7j LhgmAGWTCT2uW3/iLL4t9srgJ+EFpYi2uU1G9UjtqvIqwiEKTe6iM4vSgupvnw1k YGm89ilbshbYUA1+AtaPkfna7ayFU9UY2EJIU+j2xhtsexKuUuGVugadD2G8wW3Q jrIwFYK/gVbGK704jIjbJlqALsx+Rd9xSQv0hLHVbL9OJrBSVQs3ZbaezMhm1qiO x6xmqLco+6EdOjhpGh7NplJj/jENI6aauOvofiqu/rV5Qz1u+EaDYhwW2HGuL9f9 9fF0XfkeunNC0GbIYUvq2RVYkHtCqFAdjP8FXkXz30MCSWQJiyJokDCCIIZBqwEI qAbxKKJIrj+Q8n0= =5isD -----END PGP SIGNATURE----- Merge tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: - Add Nicolas Bouchinet and Xiu Jianfeng as Lockdown maintainers The Lockdown LSM has been without a dedicated mantainer since its original acceptance upstream, and it has suffered as a result. Thankfully we have two new volunteers who together I believe have the background and desire to help ensure Lockdown is properly supported. - Remove the unused cap_mmap_file() declaration * tag 'lsm-pr-20250725' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: MAINTAINERS: Add Xiu and myself as Lockdown maintainers security: Remove unused declaration cap_mmap_file() lsm: trivial comment fix |
||
|
Linus Torvalds
|
4d40b59d8b |
Hi,
This PR has quite a few commits but nothing really that would be worth of spending too much time for, or would want to emphasize in particular. BR, Jarkko -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaIAmHQAKCRAaerohdGur 0pBVAP94mutr2EyDyvJWpzej0fWROHzL1EkJacuKxmabt7HnJgEA9H8Ug6OoAdKq V1v+Z9iL1wrQ3Yfp28vHhdrAQUgDJgA= =cjP7 -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm updates from Jarkko Sakkinen: "Quite a few commits but nothing really that would be worth of spending too much time for, or would want to emphasize in particular" * tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm_crb_ffa: handle tpm busy return code tpm_crb_ffa: Remove memset usage tpm_crb_ffa: Fix typos in function name tpm: Check for completion after timeout tpm: Use of_reserved_mem_region_to_resource() for "memory-region" tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions tpm_crb_ffa: Remove unused export tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC tpm: support devices with synchronous send() tpm: add bufsiz parameter in the .send callback |
||
|
Linus Torvalds
|
283564a433 |
fscrypt updates for 6.17
Simplify how fscrypt uses the crypto API, resulting in some
significant performance improvements:
- Drop the incomplete and problematic support for asynchronous
algorithms. These drivers are bug-prone, and it turns out they are
actually much slower than the CPU-based code as well.
- Allocate crypto requests on the stack instead of the heap. This
improves encryption and decryption performance, especially for
filenames. It also eliminates a point of failure during I/O.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ+fhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK+dkAQDrHUTj9dGZI/cQ/TjP0kmOv9XfYAfj
HOQDRikTX+Ip4QEA6L8FS8lJYf9EMznTvTPOkP7hXpwqzuf00vJWr+ySmQs=
=N9vo
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
"Simplify how fscrypt uses the crypto API, resulting in some
significant performance improvements:
- Drop the incomplete and problematic support for asynchronous
algorithms. These drivers are bug-prone, and it turns out they are
actually much slower than the CPU-based code as well.
- Allocate crypto requests on the stack instead of the heap. This
improves encryption and decryption performance, especially for
filenames. This also eliminates a point of failure during I/O"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
ceph: Remove gfp_t argument from ceph_fscrypt_encrypt_*()
fscrypt: Remove gfp_t argument from fscrypt_encrypt_block_inplace()
fscrypt: Remove gfp_t argument from fscrypt_crypt_data_unit()
fscrypt: Switch to sync_skcipher and on-stack requests
fscrypt: Drop FORBID_WEAK_KEYS flag for AES-ECB
fscrypt: Don't use asynchronous CryptoAPI algorithms
fscrypt: Don't use problematic non-inline crypto engines
fscrypt: Drop obsolete recommendation to enable optimized SHA-512
fscrypt: Explicitly include <linux/export.h>
|
||
|
Linus Torvalds
|
4b65b859f5 |
Crypto library conversions for 6.17
Convert fsverity and apparmor to use the SHA-2 library functions instead of crypto_shash. This is simpler and also slightly faster. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ+MhQcZWJpZ2dlcnNA a2VybmVsLm9yZwAKCRDzXCl4vpKOK6LlAP42XrHo9hMqCnVs7uCtDVOk2kBUB7ml m7rkVqQLiEbgAAEAiFvQYPjiaUedTi+bH45+qP/O/LxY7y5laIby7QKa1wc= =X4Xs -----END PGP SIGNATURE----- Merge tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull crypto library conversions from Eric Biggers: "Convert fsverity and apparmor to use the SHA-2 library functions instead of crypto_shash. This is simpler and also slightly faster" * tag 'libcrypto-conversions-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: fsverity: Switch from crypto_shash to SHA-2 library fsverity: Explicitly include <linux/export.h> apparmor: use SHA-256 library API instead of crypto_shash API |
||
|
Linus Torvalds
|
f2f573ebd4 |
Crypto library tests for 6.17
Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256, SHA-384, and SHA-512 library functions. These are the first KUnit tests for lib/crypto/. So in addition to being useful tests for these specific algorithms, they also establish some conventions for lib/crypto/ testing going forwards. The new tests are fairly comprehensive: more comprehensive than the generic crypto infrastructure's tests. They use a variety of techniques to check for the types of implementation bugs that tend to occur in the real world, rather than just naively checking some test vectors. (Interestingly, poly1305_kunit found a bug in QEMU.) The core test logic is shared by all six algorithms, rather than being duplicated for each algorithm. Each algorithm's test suite also optionally includes a benchmark. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ+WhQcZWJpZ2dlcnNA a2VybmVsLm9yZwAKCRDzXCl4vpKOK+C4AQCOi7iOlFLouUfu9klrovp3i/iSMhyQ gUEHPGSelBy4wQD+NnrLGIdpCcaDAzyWpT4TxG6esN2/97ewh4VUa2MDuQQ= =rS0F -----END PGP SIGNATURE----- Merge tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux Pull crypto library test updates from Eric Biggers: "Add KUnit test suites for the Poly1305, SHA-1, SHA-224, SHA-256, SHA-384, and SHA-512 library functions. These are the first KUnit tests for lib/crypto/. So in addition to being useful tests for these specific algorithms, they also establish some conventions for lib/crypto/ testing going forwards. The new tests are fairly comprehensive: more comprehensive than the generic crypto infrastructure's tests. They use a variety of techniques to check for the types of implementation bugs that tend to occur in the real world, rather than just naively checking some test vectors. (Interestingly, poly1305_kunit found a bug in QEMU) The core test logic is shared by all six algorithms, rather than being duplicated for each algorithm. Each algorithm's test suite also optionally includes a benchmark" * tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: lib/crypto: tests: Annotate worker to be on stack lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1 lib/crypto: tests: Add KUnit tests for Poly1305 lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512 lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256 lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py |
||
|
Linus Torvalds
|
13150742b0 |
Crypto library updates for 6.17
This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants. These APIs will allow further simplifications across the
kernel as users start using them instead of the old-school crypto API.
(I've already written a lot of such conversion patches, removing over
1000 more lines of code. But most of those will target 6.18 or later.)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ93BQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8HCAQD3O9P0qd6wscne5XuRwaybzKHQ2AqU
OlhlDZWQQEvYAgD/aa6KP/DS+8RKGj0TBn6bACAJyXyDygFXq5a5s9pGzAs=
=UmMM
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
||
Krzysztof Kozlowski
|
0121898ec0 |
dt-bindings: Correct indentation and style in DTS example
DTS example in the bindings should be indented with 2- or 4-spaces and aligned with opening '- |', so correct any differences like 3-spaces or mixtures 2- and 4-spaces in one binding. No functional changes here, but saves some comments during reviews of new patches built on existing code. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Lee Jones <lee@kernel.org> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas Link: https://lore.kernel.org/r/20250107131456.247610-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250725100241.120106-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
Kees Cook
|
ee4cf79820 |
staging: media: atomisp: Fix stack buffer overflow in gmin_get_var_int()
When gmin_get_config_var() calls efi.get_variable() and the EFI variable
is larger than the expected buffer size, two behaviors combine to create
a stack buffer overflow:
1. gmin_get_config_var() does not return the proper error code when
efi.get_variable() fails. It returns the stale 'ret' value from
earlier operations instead of indicating the EFI failure.
2. When efi.get_variable() returns EFI_BUFFER_TOO_SMALL, it updates
*out_len to the required buffer size but writes no data to the output
buffer. However, due to bug #1, gmin_get_var_int() believes the call
succeeded.
The caller gmin_get_var_int() then performs:
- Allocates val[CFG_VAR_NAME_MAX + 1] (65 bytes) on stack
- Calls gmin_get_config_var(dev, is_gmin, var, val, &len) with len=64
- If EFI variable is >64 bytes, efi.get_variable() sets len=required_size
- Due to bug #1, thinks call succeeded with len=required_size
- Executes val[len] = 0, writing past end of 65-byte stack buffer
This creates a stack buffer overflow when EFI variables are larger than
64 bytes. Since EFI variables can be controlled by firmware or system
configuration, this could potentially be exploited for code execution.
Fix the bug by returning proper error codes from gmin_get_config_var()
based on EFI status instead of stale 'ret' value.
The gmin_get_var_int() function is called during device initialization
for camera sensor configuration on Intel Bay Trail and Cherry Trail
platforms using the atomisp camera stack.
Reported-by: zepta <z3ptaa@gmail.com>
Closes: https://lore.kernel.org/all/CAPBS6KoQyM7FMdPwOuXteXsOe44X4H3F8Fw+y_qWq6E+OdmxQA@mail.gmail.com
Fixes:
|