In preparation for adding a parallel, per-chip attribute group for
exported GPIO lines, stop using class device APIs to refer to it in the
code. When unregistering the chip, don't call class_find_device() but
instead store exported lines in a linked list inside the GPIO chip data
object and look it up there.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-7-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently each exported GPIO is represented in sysfs as a separate class
device. This allows us to simply use dev_get_drvdata() to retrieve the
pointer passed to device_create_with_groups() from sysfs ops callbacks.
However, we're preparing to add a parallel set of per-line sysfs
attributes that will live inside the associated gpiochip group. They are
not registered as class devices and so have the parent device passed as
argument to their callbacks (the GPIO chip class device).
Put the attribute structs inside the GPIO descriptor data and
dereference the relevant ones using container_of() in the callbacks.
This way, we'll be able to reuse the same code for both the legacy and
new GPIO attributes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-6-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In preparation for future commits which will make use of descriptor AND
GPIO-device data in the same functions rename the former from data to
desc_data separately which will make future changes smaller and easier
to read.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-5-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We don't use any fields from struct device in gpio_sysfs_request_irq(),
gpio_sysfs_free_irq() and gpio_sysfs_set_active_low(). We only use the
dev argument to get the associated struct gpiod_data pointer with
dev_get_drvdata().
To make the transition to not using dev_get_drvdata() across line
callbacks for sysfs attributes easier, pass gpiod_data directly to
these functions instead of having it wrapped in struct device.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-4-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There's no reason to retrieve the reference to the sysfs dirent every
time we request an interrupt, we can as well only do it once when
exporting the GPIO.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-3-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In order to enable moving away from the global GPIO numberspace-based
exporting of lines over sysfs: add a parallel, per-chip entry under
/sys/class/gpio/ for every registered GPIO chip, denoted by device ID
in the file name and not its base GPIO number.
Compared to the existing chip group: it does not contain the "base"
attribute as the goal of this change is to not refer to GPIOs by their
global number from user-space anymore. It also contains its own,
per-chip export/unexport attribute pair which allow to export lines by
their hardware offset within the chip.
Caveat #1: the new device cannot be a link to (or be linked to by) the
existing "gpiochip<BASE>" entry as we cannot create links in
/sys/class/xyz/.
Caveat #2: the new entry cannot be named "gpiochipX" as it could
conflict with devices whose base is statically defined to a low number.
Let's go with "chipX" instead.
While at it: the chip label is unique so update the untrue statement
when extending the docs.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-2-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a dedicated comparator for GPIO descriptors that performs
additional checks and hides the implementation detail of whether the
same GPIO can be associated with two separate struct gpio_desc objects.
Use it in sysfs code
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250704-gpio-sysfs-chip-export-v4-1-9289d8758243@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250715-gpiochip-set-rv-gpio-remaining-v2-2-072b4cf06330@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace the if-else with a direct call to the regmap_assign_bits()
helper and save a couple lines of code.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250715-gpiochip-set-rv-gpio-remaining-v2-1-072b4cf06330@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The fattr->fa_xflags is a u64 that comes from the user. This is a sanity
check to ensure that the users are only setting allowed flags. The
problem is that it doesn't check the upper 32 bits. It doesn't really
affect anything but for more flexibility in the future, we want to enforce
users zero out those bits.
Fixes: be7efb2d20 ("fs: introduce file_getattr and file_setattr syscalls")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/baf7b808-bcf2-4ac1-9313-882c91cc87b2@sabinyo.mountain
Signed-off-by: Christian Brauner <brauner@kernel.org>
CONFIG_AD_SIGMA_DELTA uses several symbols that it does not explicitly
select. If no other enabled driver selects them, the build fails with
either a linker failure if the driver is built in or a modpost failure
if the driver is a module.
ld.lld: error: undefined symbol: devm_spi_offload_rx_stream_request_dma_chan
ld.lld: error: undefined symbol: devm_iio_dmaengine_buffer_setup_with_handle
ld.lld: error: undefined symbol: devm_spi_offload_trigger_get
ld.lld: error: undefined symbol: devm_spi_offload_get
ld.lld: error: undefined symbol: spi_offload_trigger_enable
ld.lld: error: undefined symbol: spi_offload_trigger_disable
Select the necessary Kconfig symbols to include these functions in the
build to clear up the errors.
Fixes: 219da3ea84 ("iio: adc: ad_sigma_delta: add SPI offload support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250714-iio-ad_sigma_delta-fix-kconfig-selects-v1-1-32e0d6da0423@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Hub driver warm-resets ports in SS.Inactive or Compliance mode to
recover a possible connected device. The port reset code correctly
detects if a connection is lost during reset, but hub driver
port_event() fails to take this into account in some cases.
port_event() ends up using stale values and assumes there is a
connected device, and will try all means to recover it, including
power-cycling the port.
Details:
This case was triggered when xHC host was suspended with DbC (Debug
Capability) enabled and connected. DbC turns one xHC port into a simple
usb debug device, allowing debugging a system with an A-to-A USB debug
cable.
xhci DbC code disables DbC when xHC is system suspended to D3, and
enables it back during resume.
We essentially end up with two hosts connected to each other during
suspend, and, for a short while during resume, until DbC is enabled back.
The suspended xHC host notices some activity on the roothub port, but
can't train the link due to being suspended, so xHC hardware sets a CAS
(Cold Attach Status) flag for this port to inform xhci host driver that
the port needs to be warm reset once xHC resumes.
CAS is xHCI specific, and not part of USB specification, so xhci driver
tells usb core that the port has a connection and link is in compliance
mode. Recovery from complinace mode is similar to CAS recovery.
xhci CAS driver support that fakes a compliance mode connection was added
in commit 8bea2bd37d ("usb: Add support for root hub port status CAS")
Once xHCI resumes and DbC is enabled back, all activity on the xHC
roothub host side port disappears. The hub driver will anyway think
port has a connection and link is in compliance mode, and hub driver
will try to recover it.
The port power-cycle during recovery seems to cause issues to the active
DbC connection.
Fix this by clearing connect_change flag if hub_port_reset() returns
-ENOTCONN, thus avoiding the whole unnecessary port recovery and
initialization attempt.
Cc: stable@vger.kernel.org
Fixes: 8bea2bd37d ("usb: Add support for root hub port status CAS")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250623133947.3144608-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the setting of the ODR register value in the probe function for
AD7177. The AD7177 chip has a different ODR value after reset than the
other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip.
The driver already has this information available in odr_start_value
and uses it when checking valid values when writing to the
sampling_frequency attribute, but failed to set the correct initial
value in the probe function.
Fixes: 37ae8381cc ("iio: adc: ad7173: add support for additional models")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250710-iio-adc-ad7173-fix-setting-odr-in-probe-v1-1-78a100fec998@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the channel index values passed to ad_sd_calibrate() in
ad7173_calibrate_all().
ad7173_calibrate_all() expects these values to be that of the CHANNELx
register assigned to the channel, not the datasheet INPUTx number of the
channel. The incorrect values were causing register writes to fail for
some channels because they set the WEN bit that must always be 0 for
register access and set the R/W bit to read instead of write. For other
channels, the channel number was just wrong because the CHANNELx
registers are generally assigned in reverse order and so almost never
match the INPUTx numbers.
Fixes: 031bdc8aee ("iio: adc: ad7173: add calibration support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250708-iio-adc-ad7313-fix-calibration-channel-v1-1-e6174e2c7cbf@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the num_slots value for most chips in the ad7173 driver. The correct
value is the number of CHANNELx registers on the chip.
In commit 4310e15b31 ("iio: adc: ad7173: don't make copy of
ad_sigma_delta_info struct"), we refactored struct ad_sigma_delta_info
to be static const data instead of being dynamically populated during
driver probe. However, there was an existing bug in commit 76a1e6a428
("iio: adc: ad7173: add AD7173 driver") where num_slots was incorrectly
set to the number of CONFIGx registers instead of the number of
CHANNELx registers. This bug was partially propagated to the refactored
code in that the 16-channel chips were only given 8 slots instead of
16 although we did managed to fix the 8-channel chips and one of the
4-channel chips in that commit. However, we botched two of the 4-channel
chips and ended up incorrectly giving them 8 slots during the
refactoring.
This patch fixes that mistake on the 4-channel chips and also
corrects the 16-channel chips to have 16 slots.
Fixes: 4310e15b31 ("iio: adc: ad7173: don't make copy of ad_sigma_delta_info struct")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250706-iio-adc-ad7173-fix-num_slots-on-most-chips-v3-1-d1f5453198a7@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix the index used to look up the channel when accessing the
syscalib_mode attribute. The address field is a 0-based index (same
as scan_index) that it used to access the channel in the
ad7173_channels array throughout the driver. The channels field, on
the other hand, may not match the address field depending on the
channel configuration specified in the device tree and could result
in an out-of-bounds access.
Fixes: 031bdc8aee ("iio: adc: ad7173: add calibration support")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250703-iio-adc-ad7173-fix-channels-index-for-syscalib_mode-v1-1-7fdaedb9cac0@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the buffer disable callback from postdisable to predisable.
This balances the existing posteanble callback. Using postdisable
with posteanble can be problematic, for example, if update_scan_mode
fails, it would call postdisable without ever having called posteanble,
so the drivers using this would be in an unexpected state when
postdisable was called.
Fixes: af3008485e ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250703-iio-adc-ad_sigma_delta-buffer-predisable-v1-1-f2ab85138f1f@baylibre.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
After previous patches, struct hal_ops is finally empty now. Remove
the structure and related initialization functions.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-12-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointer c2h_id_filter from struct hal_ops and use
c2h_id_filter_ccx_8723b directly to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-11-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function pointer hal_reset_security_engine is never set. As a
consequence, the function rtw_hal_reset_security_engine does nothing.
Remove both to reduce dead code.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-10-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointer xmit_thread_handler and use
rtl8723bs_xmit_buf_handler directly to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-9-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the macro hal_xmit_handler and use rtl8723bs_xmit_buf_handler
directly to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointer fill_h2c_cmd and use FillH2CCmd8723B directly
to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointer c2h_handler and use c2h_handler_8723b directly
to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointer hal_notch_filter and use hal_notch_filter_8723b
directly to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the wrapper function rtl8723b_SetHalODMVar and use SetHalODMVar
directly to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function pointer SetHalODMVarHandler and use rtl8723b_SetHalODMVar
directly to reduce code complexity.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20250715182814.212708-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most of the users of vchiq_shutdown ignore the return value,
which is bad because this could lead to resource leaks.
So instead of changing all calls to vchiq_shutdown, it's easier
to make vchiq_shutdown never fail.
Fixes: 71bad7f086 ("staging: add bcm2708 vchiq driver")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250715161108.3411-4-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 3e5def4249 ("staging: vchiq_arm: Improve initial VCHIQ connect")
based on the assumption that in good case the VCHIQ connect always happen and
therefore the keep-alive thread is guaranteed to be woken up. This is wrong,
because in certain configurations there are no VCHIQ users and so the VCHIQ
connect never happen. So revert it.
Fixes: 3e5def4249 ("staging: vchiq_arm: Improve initial VCHIQ connect")
Reported-by: Maíra Canal <mcanal@igalia.com>
Closes: https://lore.kernel.org/linux-staging/ba35b960-a981-4671-9f7f-060da10feaa1@usp.br/
Cc: stable@kernel.org
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250715161108.3411-2-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update ``->error_handler()`` section of the libata documentation file
Documentation/driver-api/libata.rst to remove the reference to the
function ata_do_eh() as that function was removed. The reference to the
function ata_bmdma_drive_eh() is also removed as that function does not
exist at all. And while at it, cleanup the description of the various
reset operations using a bullet list.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250716020315.235457-4-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Introduce struct ata_reset_operations to aggregate in a single structure
the definitions of the 4 reset methods (prereset, softreset, hardreset
and postreset) for a port. This new structure is used in struct ata_port
to define the reset methods for a regular port (reset field) and for a
port-multiplier port (pmp_reset field). A pointer to either of these
fields replaces the 4 reset method arguments passed to ata_eh_recover()
and ata_eh_reset().
The definition of the reset methods for all drivers is changed to use
the reset and pmp_reset fields in struct ata_port_operations.
A large number of files is modifed, but no functional changes are
introduced.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250716020315.235457-3-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The only reason for ata_do_eh() to exist is that the two caller sites,
ata_std_error_handler() and ata_sff_error_handler() may pass it a
NULL hardreset operation so that the built-in (generic) hardreset
operation for a driver is ignored if the adapter SCR access is not
available.
However, ata_std_error_handler() and ata_sff_error_handler()
modifications of the hardreset port operation can easily be combined as
they are mutually exclusive. That is, a driver using sata_std_hardreset()
as its hardreset operation cannot use sata_sff_hardreset() and
vice-versa.
With this observation, ata_do_eh() can be removed and its code moved to
ata_std_error_handler(). The condition used to ignore the built-in
hardreset port operation is modified to be the one that was used in
ata_sff_error_handler(). This requires defining a stub for the function
sata_sff_hardreset() to avoid compilation errors when CONFIG_ATA_SFF is
not enabled. Furthermore, instead of modifying the local hardreset
operation definition, set the ATA_LFLAG_NO_HRST link flag to prevent
the use of built-in hardreset methods for ports without a valid scr_read
function. This flag is checked in ata_eh_reset() and if set, the
hardreset method is ignored.
This change simplifies ata_sff_error_handler() as this function now only
needs to call ata_std_error_handler().
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250716020315.235457-2-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
similar to 66635b0776 ("assorted variants of irqfd setup: convert
to CLASS(fd)") a year ago...
Acked-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Policy loaded using abi 7 socket mediation was not being applied
correctly in all cases. In some cases with fs based unix sockets a
subset of permissions where allowed when they should have been denied.
This was happening because the check for if the socket was an fs based
unix socket came before the abi check. But the abi check is where the
correct path is selected, so having the fs unix socket check occur
early would cause the wrong code path to be used.
Fix this by pushing the fs unix to be done after the abi check.
Fixes: dcd7a55941 ("apparmor: gate make fine grained unix mediation behind v9 abi")
Signed-off-by: John Johansen <john.johansen@canonical.com>
AA_DEBUG_LABEL() was not specifying it vargs, which is needed so it can
output debug parameters.
Fixes: 71e6cff3e0 ("apparmor: Improve debug print infrastructure")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The auditing of addresses currently doesn't include the source address
and mixes source and foreign/peer under the same audit name. Fix this
so source is always addr, and the foreign/peer is peer_addr.
Fixes: c05e705812 ("apparmor: add fine grained af_unix mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
The use of the double lock is not necessary and problematic. Instead
pull the bits that need locks into their own sections and grab the
needed references.
Fixes: c05e705812 ("apparmor: add fine grained af_unix mediation")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Add a kernel doc header for __end_current_label_crit_section(), and
update the header for __begin_current_label_crit_section().
Fixes: b42ecc5f58ef ("apparmor: make __begin_current_label_crit_section() indicate whether put is needed")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Same as aa_get_newest_cred_label_condref().
This avoids a bunch of work overall and allows the compiler to note when no
clean up is necessary, allowing for tail calls.
This in particular happens in apparmor_file_permission(), which manages to
tail call aa_file_perm() 105 bytes in (vs a regular call 112 bytes in
followed by branches to figure out if clean up is needed).
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
This reverts commit e9ed1eb8f6.
Eric has requested that this patch be taken through the libcrypto-next
tree, instead.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Some versions of the parser are generating an xtable transition per
state in the state machine, even when the state machine isn't using
the transition table.
The parser bug is triggered by
commit 2e12c5f060 ("apparmor: add additional flags to extended permission.")
In addition to fixing this in userspace, mitigate this in the kernel
as part of the policy verification checks by detecting this situation
and adjusting to what is actually used, or if not used at all freeing
it, so we are not wasting unneeded memory on policy.
Fixes: 2e12c5f060 ("apparmor: add additional flags to extended permission.")
Signed-off-by: John Johansen <john.johansen@canonical.com>
There is a static checker warning that gt returned by xe_device_get_gt can
be NULL and that is being dereferenced. Use xe_root_mmio_gt instead, which
is equivalent and cannot return a NULL gt 0.
Fixes: 10d42ef34b ("drm/xe/oa: Assign hwe for OAM_SAG")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250715181422.2807624-1-ashutosh.dixit@intel.com
After a recent change in clang to strengthen uninitialized warnings [1],
it points out that in one of the error paths in parse_btf_arg(), params
is used uninitialized:
kernel/trace/trace_probe.c:660:19: warning: variable 'params' is uninitialized when used here [-Wuninitialized]
660 | return PTR_ERR(params);
| ^~~~~~
Match many other NO_BTF_ENTRY error cases and return -ENOENT, clearing
up the warning.
Link: https://lore.kernel.org/all/20250715-trace_probe-fix-const-uninit-warning-v1-1-98960f91dd04@kernel.org/
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2110
Fixes: d157d76944 ("tracing/probes: Support BTF field access from $retval")
Link: 2464313eef [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Extract the complex expedited handling condition in rcu_read_unlock_special()
into a separate function rcu_unlock_needs_exp_handling() with detailed
comments explaining each condition.
This improves code readability. No functional change intended.
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Now that SRCU-lite has been removed from the kernel, let's remove the
now-redundant deprecation from checkpatch.pl.
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
This commit removes the SRCU-lite implementation, which has been replaced
by SRCU-fast.
Both SRCU-lite and SRCU-fast provide faster readers by dropping the
smp_mb() call from their lock and unlock primitives, but incur a pair
of added RCU grace periods during the SRCU grace period. There is a
trivial mapping from the SRCU-lite API to that of SRCU-fast, so there
should be no transition issues.
[ paulmck: Apply Christoph Hellwig feedback. ]
Signed-off-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Currently, SRCU-fast grace periods use synchronize_rcu() to provide the
needed ordering with readers, even given an expedited SRCU-fast grace
period, which isn't all that expedited. This commit therefore instead
uses synchronize_rcu_expedited() if there is an expedited SRCU-fast
grace period in flight.
Of course, given an non-expedited SRCU-fast grace period blocked in
synchronize_rcu(), a later request for an expedited SRCU-fast grace
period will wait for that synchronize_rcu() to return before switching
to use of synchronize_rcu_expedited(). If this turns out to be a real
problem for a production workload, we can increase the complexity (but
likely also degrade the energy efficiency) to speed things up further.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
