struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250707-gpiochip-set-rv-gpio-round4-v1-10-35668aaaf6d2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250707-gpiochip-set-rv-gpio-round4-v1-5-35668aaaf6d2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
One of the users of global GPIO numbers in the kernel are the debugfs
callbacks in GPIO drivers. Before converting any custom .dbg_show()
callbacks in individual modules, let's first make GPIO core stop using
GPIO base in debugfs output. Use hardware offsets instead.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250707141313.73169-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the traffic_class in GRH to a DSCP value as required by the HW.
Fixes: e095405b45 ("RDMA/mana_ib: Modify QP state")
Signed-off-by: Shiraz Saleem <shirazsaleem@microsoft.com>
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1752143085-4169-1-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add an option to create CQ using external memory instead of allocating
in the driver. The memory can be passed from userspace by dmabuf fd and
an offset or a VA. One of the possible usages is creating CQs that
reside in accelerator memory, allowing low latency asynchronous direct
polling from the accelerator device. Add a capability bit to reflect on
the feature support.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250708202308.24783-4-mrgolin@amazon.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In some cases drivers may need to check if a given umem is contiguous.
Add a helper function in core code so that drivers don't need to deal
with umem or scatter-gather lists structure.
Additionally add a helper for getting umem's start DMA address and use
it in other helper functions that open code it.
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250708202308.24783-3-mrgolin@amazon.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add ioctl command attributes and a common handling for the option to
create CQs with memory buffers passed from userspace. When required
attributes are supplied, create umem and provide it for driver's use.
The extension enables creation of CQs on top of preallocated CPU
virtual or device memory buffers, by supplying VA or dmabuf fd, in a
common way.
Drivers can support this flow by initializing a new create_cq_umem fp
field in their ops struct, with a function that can handle the new
parameter.
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250708202308.24783-2-mrgolin@amazon.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Syzbot found a buffer underflow in __hid_request(). Add a related test
case for it.
It's not perfect, but it allows to catch a corner case when a report
descriptor is crafted so that it has a size of 0.
Link: https://patch.msgid.link/20250710-report-size-null-v2-4-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The low level transport driver expects the first byte to be the report
ID, even when the report ID is not use (in which case they just shift
the buffer).
However, __hid_request() whas not offsetting the buffer it used by one
in this case, meaning that the raw_request() callback emitted by the
transport driver would be stripped of the first byte.
Note: this changes the API for uhid devices when a request is made
through hid_hw_request. However, several considerations makes me think
this is fine:
- every request to a HID device made through hid_hw_request() would see
that change, but every request made through hid_hw_raw_request()
already has the new behaviour. So that means that the users are
already facing situations where they might have or not the first byte
being the null report ID when it is 0. We are making things more
straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling
hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same
shift if the report ID is 0 and the given buffer has a size > 0.
[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Closes: https://lore.kernel.org/linux-input/c75433e0-9b47-4072-bbe8-b1d14ea97b13@rowland.harvard.edu/
Reported-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8258d5439c49d4c35f43
Tested-by: syzbot+8258d5439c49d4c35f43@syzkaller.appspotmail.com
Fixes: 4fa5a7f76c ("HID: core: implement generic .request()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250710-report-size-null-v2-2-ccf922b7c4e5@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The port 2 host PF can be disabled, this bit reflects that setting.
Signed-off-by: Daniel Jurgens <danielj@nvidia.com>
Reviewed-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752064867-16874-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Introduce the `disciplined_fr_counter` capability bit to indicate that
the device’s free-running cycle counter is disciplined to real-time.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1752064867-16874-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The current implementation of DMABUF memory registration uses a fixed
page size for the memory key (mkey), which can lead to suboptimal
performance when the underlying memory layout may offer better page
size.
The optimization improves performance by reducing the number of page
table entries required for the mkey, leading to less MTT/KSM descriptors
that the HCA must go through to find translations, fewer cache-lines,
and shorter UMR work requests on mkey updates such as when
re-registering or reusing a cacheable mkey.
To ensure safe page size updates, the implementation uses a 5-step
process:
1. Make the first X entries non-present, while X is calculated to be
minimal according to a large page shift that can be used to cover the
MR length.
2. Update the page size to the large supported page size
3. Load the remaining N-X entries according to the (optimized)
page shift
4. Update the page size according to the (optimized) page shift
5. Load the first X entries with the correct translations
This ensures that at no point is the MR accessible with a partially
updated translation table, maintaining correctness and preventing
access to stale or inconsistent mappings, such as having an mkey
advertising the new page size while some of the underlying page table
entries still contain the old page size translations.
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/bc05a6b2142c02f96a90635f9a4458ee4bbbf39f.1751979184.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Align the capabilities checked when using the log_page_size 6th bit in the
mkey context to the PRM definition. The upper and lower bounds are set by
max/min caps, and modification of the 6th bit by UMR is allowed only when
a specific UMR cap is set.
Current implementation falsely assumes all page sizes up-to 2^63 are
supported when the UMR cap is set. In case the upper bound cap is lower
than 63, this might result a FW syndrome on mkey creation, e.g:
mlx5_core 0000:c1:00.0: mlx5_cmd_out_err:832:(pid 0): CREATE_MKEY(0×200) op_mod(0×0) failed, status bad parameter(0×3), syndrome (0×38a711), err(-22)
Previous cap enforcement is still correct for all current HW, FW and
driver combinations. However, this patch aligns the code to be PRM
compliant in the general case.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/eab4eeb4785105a4bb5eb362dc0b3662cd840412.1751979184.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
From Edward:
This patch series enables the mlx5 driver to dynamically choose the
optimal page size for a DMABUF-based memory key (mkey), rather than
always registering with a fixed page size.
Previously, DMABUF memory registration used a fixed 4K page size for
mkeys which could lead to suboptimal performance when the underlying
memory layout may offer better page sizes.
This approach did not take advantage of larger page size capabilities
advertised by the HCA, and the driver was not setting the proper page
size mask in the mkey mask when performing page size changes,
potentially
leading to invalid registrations when updating to a very large pages.
This series improves DMABUF performance by dynamically selecting the
best page size for a given memory region (MR) both at creation time and
on page fault occurrences, based on the underlying layout and fixing
related gaps and bugs.
By doing so, we reduce the number of page table entries (and thus MTT/
KSM descriptors) that the HCA must traverse, which in turn reduces
cache-line fetches.
Thanks
* mlx5-next:
RDMA/mlx5: Fix UMR modifying of mkey page size
net/mlx5: Expose HCA capability bits for mkey max page size
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When changing the page size on an mkey, the driver needs to set the
appropriate bits in the mkey mask to indicate which fields are being
modified.
The 6th bit of a page size in mlx5 driver is considered an extension,
and this bit has a dedicated capability and mask bits.
Previously, the driver was not setting this mask in the mkey mask when
performing page size changes, regardless of its hardware support,
potentially leading to an incorrect page size updates.
This fixes the issue by setting the relevant bit in the mkey mask when
performing page size changes on an mkey and the 6th bit of this field is
supported by the hardware.
Fixes: cef7dde883 ("net/mlx5: Expand mkey page size to support 6 bits")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/9f43a9c73bf2db6085a99dc836f7137e76579f09.1751979184.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Expose the HCA capability for maximal page size that can be configured
for an mkey. Used for enforcing capabilities when working with highly
contiguous memory and using large page sizes.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/3e4d3fda37934430f65f72601519e22bf396fd05.1751979184.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add ov5640 overlay file for imx8qm-mek and imx8qxp-mek board. Camera can
connect different CSI port. So use dts overlay file to handle these
difference connect options.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Yun Lu says:
====================
fix two issues and optimize code on tpacket_snd()
This series fix two issues and optimize the code on tpacket_snd():
1, fix the SO_SNDTIMEO constraint not effective due to the changes in
commit 581073f626;
2, fix a soft lockup issue on a specific edge case, and also optimize
the loop logic to be clearer and more obvious;
---
Changes in v5:
- Still combine fix and optimization together, change to while(1).
Thanks: Willem de Bruijn.
- Link to v4: https://lore.kernel.org/all/20250710102639.280932-1-luyun_611@163.com/
Changes in v4:
- Fix a typo and add the missing semicolon. Thanks: Simon Horman.
- Split the second patch into two, one to fix, another to optimize.
Thanks: Willem de Bruijn
- Link to v3: https://lore.kernel.org/all/20250709095653.62469-1-luyun_611@163.com/
Changes in v3:
- Split in two different patches.
- Simplify the code and reuse ph to continue. Thanks: Eric Dumazet.
- Link to v2: https://lore.kernel.org/all/20250708020642.27838-1-luyun_611@163.com/
Changes in v2:
- Add a Fixes tag.
- Link to v1: https://lore.kernel.org/all/20250707081629.10344-1-luyun_611@163.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for
pending_refcnt to decrement to zero before returning. The pending_refcnt
is decremented by 1 when the skb->destructor function is called,
indicating that the skb has been successfully sent and needs to be
destroyed.
If an error occurs during this process, the tpacket_snd() function will
exit and return error, but pending_refcnt may not yet have decremented to
zero. Assuming the next send operation is executed immediately, but there
are no available frames to be sent in tx_ring (i.e., packet_current_frame
returns NULL), and skb is also NULL, the function will not execute
wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it
will enter a do-while loop, waiting for pending_refcnt to be zero. Even
if the previous skb has completed transmission, the skb->destructor
function can only be invoked in the ksoftirqd thread (assuming NAPI
threading is enabled). When both the ksoftirqd thread and the tpacket_snd
operation happen to run on the same CPU, and the CPU trapped in the
do-while loop without yielding, the ksoftirqd thread will not get
scheduled to run. As a result, pending_refcnt will never be reduced to
zero, and the do-while loop cannot exit, eventually leading to a CPU soft
lockup issue.
In fact, skb is true for all but the first iterations of that loop, and
as long as pending_refcnt is not zero, even if incremented by a previous
call, wait_for_completion_interruptible_timeout() should be executed to
yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore,
the execution condition of this function should be modified to check if
pending_refcnt is not zero, instead of check skb.
- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {
As a result, the judgment conditions are duplicated with the end code of
the while loop, and packet_read_pending() is a very expensive function.
Actually, this loop can only exit when ph is NULL, so the loop condition
can be changed to while (1), and in the "ph = NULL" branch, if the
subsequent condition of if is not met, the loop can break directly. Now,
the loop logic remains the same as origin but is clearer and more obvious.
Fixes: 89ed5b5190 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
Cc: stable@kernel.org
Suggested-by: LongJun Tang <tanglongjun@kylinos.cn>
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the changes in commit 581073f626 ("af_packet: do not call
packet_read_pending() from tpacket_destruct_skb()"), every time
tpacket_destruct_skb() is executed, the skb_completion is marked as
completed. When wait_for_completion_interruptible_timeout() returns
completed, the pending_refcnt has not yet been reduced to zero.
Therefore, when ph is NULL, the wait function may need to be called
multiple times until packet_read_pending() finally returns zero.
We should call sock_sndtimeo() only once, otherwise the SO_SNDTIMEO
constraint could be way off.
Fixes: 581073f626 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()")
Cc: stable@kernel.org
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A race condition can occur when 'agg' is modified in qfq_change_agg
(called during qfq_enqueue) while other threads access it
concurrently. For example, qfq_dump_class may trigger a NULL
dereference, and qfq_delete_class may cause a use-after-free.
This patch addresses the issue by:
1. Moved qfq_destroy_class into the critical section.
2. Added sch_tree_lock protection to qfq_dump_class and
qfq_dump_class_stats.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The EXT_STATS macro in fs/ext4/ext4_extents.h has been defined
but never used in the codebase since its introduction. This patch
removes it.
Analysis:
1. No references found in fs/ext4/ or other kernel code.
2. No impact on compilation or functionality.
3. Git history shows it was never utilized.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250527053805.1550912-1-liubaolin12138@163.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
No point having REQ_F_POLLED in both IO_REQ_CLEAN_FLAGS and in
IO_REQ_CLEAN_SLOW_FLAGS, and having both io_free_batch_list() and then
io_clean_op() check for it and clean it.
Move REQ_F_POLLED to IO_REQ_CLEAN_SLOW_FLAGS and drop it from
IO_REQ_CLEAN_FLAGS, and have only io_free_batch_list() do the check and
freeing.
Link: https://lore.kernel.org/io-uring/20250712000344.1579663-2-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The test_kmem_dead_cgroups test currently assumes that RCU and
memory reclaim will complete within 5 seconds. In some environments
this timeout may be insufficient, leading to spurious test failures.
This patch introduces max_time set to 20 which is then used in the
test. After 5th sec the debug message is printed to indicate the
cleanup is still ongoing.
In the system under test with 16 CPUs the original test was failing
most of the time and the cleanup time took usually approx. 6sec.
Further tests were conducted with and without do_rcu_barrier and the
results (respectively) are as follow:
quantiles 0 0.25 0.5 0.75 1
1 2 3 8 20 (mean = 4.7667)
3 5 8 8 20 (mean = 7.6667)
Acked-by: Michal Koutny <mkoutny@suse.com>
Signed-off-by: Sebastian Chlad <sebastian.chlad@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaHGbTgAKCRDdBJ7gKXxA
jowqAPiCWBFfcFaX20BxVaMU1PjC3Lh9llDXqQwBhBNdcadSAP44SGQ8nrfV+piB
OcNz2AEwBBfS354G0Etlh4k08YoAAw==
=IDDc
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
- Address cache aliasing for mappable page cache folios;
- Allow readdir() to be interrupted;
- Fix large fragment handling which was errored out by mistake;
- Add missing tracepoints;
- Use memcpy_to_folio() to replace copy_to_iter() for inline data.
-----BEGIN PGP SIGNATURE-----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=7VXc
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"Fix for a cache aliasing issue by adding missing flush_dcache_folio(),
which causes execution failures on some arm32 setups.
Fix for large compressed fragments, which could be generated by
-Eall-fragments option (but should be rare) and was rejected by
mistake due to an on-disk hardening commit.
The remaining ones are small fixes. Summary:
- Address cache aliasing for mappable page cache folios
- Allow readdir() to be interrupted
- Fix large fragment handling which was errored out by mistake
- Add missing tracepoints
- Use memcpy_to_folio() to replace copy_to_iter() for inline data"
* tag 'erofs-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix large fragment handling
erofs: allow readdir() to be interrupted
erofs: address D-cache aliasing
erofs: use memcpy_to_folio() to replace copy_to_iter()
erofs: fix to add missing tracepoint in erofs_read_folio()
erofs: fix to add missing tracepoint in erofs_readahead()
-----BEGIN PGP SIGNATURE-----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=/Xzo
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- fix use after free in lease break
- small fix for freeing rdma transport (fixes missing logging of
cm_qp_destroy)
- fix write count leak
* tag 'v6.16-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential use-after-free in oplock/lease break ack
ksmbd: fix a mount write count leak in ksmbd_vfs_kern_path_locked()
smb: server: make use of rdma_destroy_qp()
In commit 386a4153a2 ("firewire: ohci: cache the context run bit"), a
running member was added to the context structure to cache the running
state of a given DMA context. Although this member is accessible from IR,
IT, and AT contexts, it is currently used only by the AT context.
Additionally, the context structure includes a work item, which is also
used by the AT context. Both members are unnecessary for IR and IT
contexts.
This commit refactors the code by moving these two members into a new
structure specific to AT context.
Link: https://lore.kernel.org/r/20250710131916.31289-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Add the clock-frequency property to the cb_intosc_ls_clk and
cb_intosc_hs_div2_clk device tree nodes.
The f2s_free_clk is implemented by custom logic in the FPGA; so it
should be disabled in the dtsi by default and enabled by a
dts for a specific FPGA design on a specific board.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
This addresses this warning:
socfpga_stratix10_swvp.dtb: ethernet@ff800000 (altr,socfpga-stmmac-a10-s10):
'phy-addr' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The cpu1-start-addr property is only applicable to 32-bit SoCFPGA
platforms.
Removing this property will take care of warnings like this:
socfpga_stratix10_swvp.dtb: sysmgr@ffd12000: cpu1-start-addr:
False schema does not allow 4291846704
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
'altr,modrst-offset' property is not applicable for arm64 SoCFPGA
platforms.
This will fix this dtbs_check warning:
socfpga_stratix10_swvp.dtb:
rstmgr@ffd11000: altr,modrst-offset: False schema does not allow 32
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add the default "altr,rst-mgr" to the rstmgr node on Stratix10.
This fixes this warning:
arch/arm64/boot/dts/altera:33:10
rstmgr@ffd11000 (altr,stratix10-rst-mgr): compatible: 'oneOf' conditional
failed, one must be fixed:
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The f2s-free-clk requires a clock-frequency value. We put in an
arbitrary value of 100 MHz for a constant. The true clock frequency
would get generated in an FPGA design and the bootloader will populated
in actual hardware designs.
This fixes warning like this:
arch/arm64/boot/dts/intel:34:8
4 f2s-free-clk (fixed-clock): 'clock-frequency' is a required property
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
During RAID resync, faulty rdev cannot be removed and will result in
"Device or resource busy" error when attempting hot removal.
Reproduction steps:
mdadm -Cv /dev/md0 -l1 -n3 -e1.2 /dev/sd{b..d}
mdadm /dev/md0 -f /dev/sdb
mdadm /dev/md0 -r /dev/sdb
-> mdadm: hot remove failed for /dev/sdb: Device or resource busy
After commit 4b10a3bc67 ("md: ensure resync is prioritized over
recovery"), when a device becomes faulty during resync, the
md_choose_sync_action() function returns early without calling
remove_and_add_spares(), preventing faulty device removal.
This patch extracts a helper function remove_spares() to support
removing faulty devices during RAID resync operations.
Fixes: 4b10a3bc67 ("md: ensure resync is prioritized over recovery")
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/linux-raid/20250707075412.150301-1-zhengqixing@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
