(Q)SPI NOR flash is supplied by 1.8V. Add the corresponding supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The I²C mux controller is supplied by 3.3V rail. Add the corresponding
supply.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are two SFP interfaces usable on TQMLS1046A. Enable all the
corresponding nodes. U-Boot will configure the connection if the RCW
is configured accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is an SFP interface usable on TQMLS1043A. Enable all the
corresponding nodes. U-Boot will configure the connection if the RCW
is configured accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SFP is placed on mainboard, available to TQMLS1043A/1046A/1088A.
Provide it in a common place, disabled by default.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The jedec SPI-NOR flash node itself has no partitions, but the partitions
subnode.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The jedec SPI-NOR flash node itself has no partitions, but the partitions
subnode.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The jedec SPI-NOR flash node itself has no partitions, but the partitions
subnode.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing clocks and clock-names properties for flexcan1 in
imx94.dtsi to align with other FlexCAN instances.
Fixes: b0d011d484 ("arm64: dts: freescale: Add basic dtsi for imx943")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UART2 is often used as the console, so the DMA was likely left
off on purpose, since it's recommended to not use the DMA on the
console. Because, the driver checks to see if the UART is used for
the console when determining if it should initialize DMA, it
should be safe to enable DMA on UART2 for all users.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UART2 is often used as the console, so the DMA was likely left
off on purpose, since it's recommended to not use the DMA on the
console. Because, the driver checks to see if the UART is used for
the console when determining if it should initialize DMA, it
should be safe to enable DMA on UART2 for all users.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Only i2c0 had it's DMA channels configured. Add the missing one.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Only i2c0 had it's DMA channels configured. Add the missing one.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On phyCORE-i.MX93 SoM, the SoC WDOG_ANY output line is connected to the
external pca9451a PMIC WDOG_B input. Apply pinctrl and set the property
"fsl,ext-reset-output" for watchdog to trigger board reset via PMIC on
timeout/reset.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reference manual for the i.MX8MN states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 36ca3c8ccb ("arm64: dts: imx: Add Beacon i.MX8M Nano development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The reference manual for the i.MX8MM states the clock rate in
MMC mode is 1/2 of the input clock, therefore to properly run
at HS400 rates, the input clock must be 400MHz to operate at
200MHz. Currently the clock is set to 200MHz which is half the
rate it should be, so the throughput is half of what it should be
for HS400 operation.
Fixes: 593816fa2f ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This platform supports several displays, so rename the overlay to reflect
the actual display being used. This also aligns the name to the other
TQMa8M* modules. Apply the same change for MBa8MP-RAS314 as well, as it
uses the same overlay.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8QM MEK RevD board is a reworked version of the i.MX8QM MEK
board, which includes some sensor and component changes. One of these
components is the WM8962 codec, which is meant to replace the WM8960
codec present on i.MX8QM MEK. To avoid having to introduce a devicetree
overlay or another DTS, the WM8962 can be supported by using a virtual
I2C MUX since both of the codecs share the same I2C address.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8QXP WCPU MEK board is a reworked version of the i.MX8QXP MEK
board, which includes some sensor and component changes. One of these
components is the WM8962 codec, which is meant to replace the WM8960
codec present on i.MX8QXP MEK. To avoid having to introduce a devicetree
overlay or another DTS, the WM8962 can be supported by using a virtual
I2C MUX since both of the codecs share the same I2C address.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In order to support Asynchronous Sample Rate Converter (ASRC), switch to
fsl-asoc-card driver for the wm8960 sound card.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add edma error irq for imx93.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Alberto Merciai <alb3rt0.m3rciai@gmail.com>
Tested-by: Alberto Merciai <alb3rt0.m3rciai@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The fan controller on this board cannot work in automatic mode, and
requires software control, the reason is that it has no temperature
sensor connected.
Given that this board is a development kit and does not have any
specific fan, add a default single cooling level that would enable the
fan to spin with a 100% duty cycle, enabling a safe default.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The defaults for this SoC are configured for overdrive mode, but
the VPU clocks are currently configured for nominal mode.
Increase VPU_G1_CLK_ROOT to 800MHZ from 600MHz,
Increase VPU_G2_CLK_ROOT to 700MHZ from 500MHz, and
Increase VPU_BUS_CLK_ROOT to 800MHz from 600MHz.
This requires adjusting the clock parents. Since there is already
800MHz clock references, move the VPU_BUS and G1 clocks to it.
This frees up the VPU_PLL to be configured at 700MHz to run
the G2 clock at 700MHz.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In preparation for increasing the default VPU clocks to overdrive,
configure the nominal values first to avoid running the nominal
devices out of spec when imx8mp.dtsi is changed.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VPU_PLL clock must be set before the VPU_BUS clock which is derived
from the VPU_PLL clock else the VPU_BUS clock is 300MHz and not 600MHz.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPCv2 G1, G2 and VC8000E power-domain don't need to reference the
VPUMIX power-domain nor their module clocks since the power and reset
handling is done by the VPUMIX blkctrl driver.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Adam Ford <aford173@gmail.com>
LGTM: Peng Fan <peng.fan@nxp.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mp-beacon-kit
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The iMX8QXP and iMX8QM have a CAAM (Cryptographic Acceleration and
Assurance Module) like many other iMXs.
Add the definitions for it.
Job Rings 0 and 1 are bound to the SECO (Security Controller) ARM core
and are not exposed outside it. There's no point to define them in the
bindings as they cannot be used outside the SECO.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
ata_eh_followup_srst_needed() returns an integer used as a boolean. So
change this function to return that type.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250711082158.220047-1-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
devm_of_platform_populate() passes a NULL as the bus OF match table
to the underlying of_platform_populate(), meaning child bus devices
of the AIPSTZ bridge will not have its children devices created. Since
some SoCs (e.g. i.MX8MP) use this particular setup (e.g. SPBA bus, which
is a child of AIPSTZ5 and has multiple child nodes), the driver needs to
support it.
Therefore, replace devm_of_platform_populate() with of_platform_populate()
and pass a reference to the bus OF match table to it. For now, the only
possible child buses are simple buses.
Since the usage of devres is dropped, the complementary operation of
of_platform_populate() needs to be called during the driver's removal.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fixes: 796cba2dd4 ("bus: add driver for IMX AIPSTZ bridge")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/lkml/5029548.31r3eYUQgx@steina-w/#t
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This smartphone uses a MediaTek MT6572 system-on-chip with 512MB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-11-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This tablet uses a MediaTek MT6572 system-on-chip with 1GB of RAM.
It can currently boot into initramfs with a working UART and
Simple Framebuffer using already initialized panel by the bootloader.
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-10-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add basic support for the MediaTek MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-9-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add entries for the JTY D101 tablet and the Lenovo A369i smartphone.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-6-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
JTY produced low-cost Android tablets based on various
MediaTek MT65xx SoCs.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-5-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for watchdog on the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-4-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for sysirq on the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-2-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Replace verbatim license text with a `SPDX-License-Identifier`.
The comment header mis-attributes this license to be "X11", but the
license text does not include the last line "Except as contained in this
notice, the name of the X Consortium shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software
without prior written authorization from the X Consortium.". Therefore,
this license is actually equivalent to the SPDX "MIT" license (confirmed
by text diffing).
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Bence Csókás <csokas.bence@prolan.hu>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Rename QSPI NAND node to 'flash@0' in order to fix the following
dt-schema warning:
spi-flash@0 (spi-nand): $nodename:0: 'spi-flash@0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Describe the partitions for the bootloader and the environment
on the SPI NOR. While at it also fix the order of the properties
in the flash node itself.
Signed-off-by: Eberhard Stoll <eberhard.stoll@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The polarity of the DE signal of the transceiver is active-high for
sending. Therefore rs485-rts-active-low is wrong and needs to be
removed to make RS485 transmissions work.
Signed-off-by: Annette Kobou <annette.kobou@kontron.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 1ea4b76cdf ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for booting the secondary CPU on the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-8-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add a compatible string for the MT6572 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Max Shevchenko <wctrl@proton.me>
Link: https://lore.kernel.org/r/20250702-mt6572-v4-7-bde75b7ed445@proton.me
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The error from snd_hda_codec_init() was ignored in
snd_hda_codec_build_controls(), which should have been taken account
and abort the flow. Fix it now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-28-tiwai@suse.de
After all conversions, driver->ops became a must in most places
(except for the codec power setup which might be called before binding
to the codec driver), hence we can get rid of the superfluous
driver->ops NULL checks, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-26-tiwai@suse.de
Now that all patch_ops usage have been converted to the new
hda_codec_ops probe, we can drop patch_ops from the hda_codec,
together with the calls of patch_ops callbacks.
The hda_codec_ops.free callback is removed as all have been replaced
with the new remove callback.
Also, correct comments mentioning "patch"; it's replaced with "codec
driver".
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-25-tiwai@suse.de
Convert the HDMI codec drivers to use the new hda_codec_ops probe.
The Intel and Nvidia-MCP HDMI drivers needed slightly more changes to
deal with the unified callbacks among all models.
Also another non-trivial change is Intel driver's set_power_state
callback. An additional NULL check of codec->spec is needed there
since the set_power_state() may be called before the probe gets called
(e.g. in ASoC hda codec hda_codec_probe()).
Other than that, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-24-tiwai@suse.de
