By default firmware will not send logs to the host. This must be explicitly
enabled by the driver. The mailbox has the concept of a flag which is a u32
used as a boolean. Lack of flag defaults to a value of false. When enabling
logging historical logs may be optionally requested. These are log messages
generated by the NIC before the driver was loaded. The driver also sends a
log version to support changing the logging format in the future.
[SEND_LOGS_REQ] = {
[SEND_LOGS] /* flag to request log reporting */
[SEND_LOGS_HISTORY] /* flag to request historical logs */
[SEND_LOGS_VERSION] /* u32 indicating the log format version */
}
Logs may be sent to the user either one at a time, or when historical logs
are requested in bulk. Firmware may not send more than 14 messages in bulk
to prevent flooding the mailbox.
[LOG_MSG] = {
[LOG_INDEX] /* entry 0 - u64 index of log */
[LOG_MSEC] /* entry 0 - u32 timestamp of log */
[LOG_MSG] /* entry 0 - char log message up to 256 */
[LOG_LENGTH] /* u32 of remaining log items in arrays */
[LOG_INDEX_ARRAY] = {
[LOG_INDEX] /* entry 1 - u64 index of log */
[LOG_INDEX] /* entry 2 - u64 index of log */
...
}
[LOG_MSEC_ARRAY] = {
[LOG_MSEC] /* entry 1 - u32 timestamp of log */
[LOG_MSEC] /* entry 2 - u32 timestamp of log */
...
}
[LOG_MSG_ARRAY] = {
[LOG_MSG] /* entry 1 - char log message up to 256 */
[LOG_MSG] /* entry 2 - char log message up to 256 */
...
}
}
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-5-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When enabled, firmware may send logs messages which are specific to the
device and not the host. Create a ring buffer to store these messages
which are read by a user through DebugFS. Buffer access is protected by
a spinlock.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-4-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new macro based on FIELD_PREP to generate easily readable minimum
firmware version ints. This macro will prevent the mistake from the
previous patch from happening again.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-3-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The full minimum version is 0.10.6-0. The six is now correctly defined as
patch and shifted appropriately. 0.10.6-0 is a preproduction version of
firmware which was released over a year and a half ago. All production
devices meet this requirement.
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250702192207.697368-2-lee@trager.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5-next updates 2025-07-08
The following pull-request contains common mlx5 updates
for your *net-next* tree.
v2: https://lore.kernel.org/1751574385-24672-1-git-send-email-tariqt@nvidia.com
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Check device memory pointer before usage
net/mlx5: fs, fix RDMA TRANSPORT init cleanup flow
net/mlx5: Add IFC bits for PCIe Congestion Event object
net/mlx5: Small refactor for general object capabilities
net/mlx5: fs, add multiple prios to RDMA TRANSPORT steering domain
====================
Link: https://patch.msgid.link/1752002102-11316-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generalize node_random() and make it available to general bitmaps and
cpumasks users.
Notice, find_first_bit() is generally faster than find_nth_bit(), and we
employ it when there's a single set bit in the bitmap.
See commit 3e061d924f ("lib/nodemask: optimize node_random for
nodemask with single NUMA node").
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Yury Norov [NVIDIA]" <yury.norov@gmail.com>
Instances of the Falcon microcontroller appear in modern Nvidia GPUs and
are crucial to the GPU boot process. Document some concepts which will
make nova-core boot code easier to digest. All the information is
derived from public sources such as public documents, OpenRM and Nouveau
code.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-8-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add explanation of fwsec with diagrams. This helps clarify how the
nova-core falcon boot works.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-7-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
devinit is mentioned in the code. This patch explains it so it is clear
what it does. devinit is not only essential at boot-time, but also at
runtime due to suspend-resume and things like re-clocking.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-6-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add detailed explanation and block diagrams of the layout of the vBIOS
on Nvidia GPUs. This is important to understand how nova-core boots an
Nvidia GPU.
[ Applied Timur Tabi's feedback on providing link to BIT documentation. ]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-5-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
A CPU mask on the stack is broken for large values of CONFIG_NR_CPUS:
kernel/trace/preemptirq_delay_test.c: In function ‘preemptirq_delay_run’:
kernel/trace/preemptirq_delay_test.c:143:1: error: the frame size of 8512 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Fall back to dynamic allocation here.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Song Chen <chensong_2000@189.cn>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250620111215.3365305-1-arnd@kernel.org
Fixes: 4b9091e1c1 ("kernel: trace: preemptirq_delay_test: add cpu affinity")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Freeing of filters requires to wait for both an RCU grace period as well as
a RCU task trace wait period after they have been detached from their
lists. The trace task period can be quite large so the freeing of the
filters was moved to use the call_rcu*() routines. The problem with that is
that the callback functions of call_rcu*() is done from a soft irq and can
cause latencies if the callback takes a bit of time.
The filters are freed per event in a system and the syscalls system
contains an event per system call, which can be over 700 events. Freeing 700
filters in a bottom half is undesirable.
Instead, move the freeing to use queue_rcu_work() which is done in task
context.
Link: https://lore.kernel.org/all/9a2f0cd0-1561-4206-8966-f93ccd25927f@paulmck-laptop/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250609131732.04fd303b@gandalf.local.home
Fixes: a9d0aab5eb ("tracing: Fix regression of filter waiting a long time on RCU synchronization")
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The dedicated cpumask_next_wrap() is more verbose and effective than
cpumask_next() followed by cpumask_first().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250605000651.45281-1-yury.norov@gmail.com
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
sysmembar is a critical operation that the GSP falcon needs to perform
in the reset sequence. Add some code comments to clarify.
[acourbot@nvdidia.com: move relevant documentation to SysmemFlush type]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-2-9d188772c4c7@nvidia.com
[ Minor grammar fix in the PFB register documentation. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
xe_pm_runtime_put() is missed to be called for the error path in
xe_devcoredump_read().
Add function description comments for xe_devcoredump_read() to help
understand it.
v2: more detail function comments and refine goto logic (Matt)
Fixes: c4a2e5f865 ("drm/xe: Add devcoredump chunking")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250707004911.3502904-6-shuicheng.lin@intel.com
The deleted code is no longer needed because patch "drm/xe/guc: Plumb
GuC-capture into dev coredump" has removed the related usage code.
Remove the code to tidy up the function.
v2: s/bacause/because
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250707004911.3502904-5-shuicheng.lin@intel.com
Add several code comments to reduce acronym soup and explain how devinit
magic and bootflow works before driver loads. These are essential for
debug and development of the nova driver.
[acourbot@nvidia.com: reformat and reword a couple of sentences]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250708-nova-docs-v4-1-9d188772c4c7@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, there's really only one core callback for drivers, which is
probe().
Now, this isn't entirely true, since there is also the drop() callback of
the driver type (serving as the driver's private data), which is returned
by probe() and is dropped in remove().
On the C side remove() mainly serves two purposes:
(1) Tear down the device that is operated by the driver, e.g. call bus
specific functions, write I/O memory to reset the device, etc.
(2) Free the resources that have been allocated by a driver for a
specific device.
The drop() callback mentioned above is intended to cover (2) as the Rust
idiomatic way.
However, it is partially insufficient and inefficient to cover (1)
properly, since drop() can't be called with additional arguments, such as
the reference to the corresponding device that has the correct device
context, i.e. the Core device context.
This makes it inefficient (but not impossible) to access device
resources, e.g. to write device registers, and impossible to call device
methods, which are only accessible under the Core device context.
In order to solve this, add an additional callback for (1), which we
call unbind().
The reason for calling it unbind() is that, unlike remove(), it is *only*
meant to be used to perform teardown operations on the device (1), but
*not* to release resources (2).
Link: https://lore.kernel.org/r/20250621195118.124245-8-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, there's really only one core callback for drivers, which is
probe().
Now, this isn't entirely true, since there is also the drop() callback of
the driver type (serving as the driver's private data), which is returned
by probe() and is dropped in remove().
On the C side remove() mainly serves two purposes:
(1) Tear down the device that is operated by the driver, e.g. call bus
specific functions, write I/O memory to reset the device, etc.
(2) Free the resources that have been allocated by a driver for a
specific device.
The drop() callback mentioned above is intended to cover (2) as the Rust
idiomatic way.
However, it is partially insufficient and inefficient to cover (1)
properly, since drop() can't be called with additional arguments, such as
the reference to the corresponding device that has the correct device
context, i.e. the Core device context.
This makes it inefficient (but not impossible) to access device
resources, e.g. to write device registers, and impossible to call device
methods, which are only accessible under the Core device context.
In order to solve this, add an additional callback for (1), which we
call unbind().
The reason for calling it unbind() is that, unlike remove(), it is *only*
meant to be used to perform teardown operations on the device (1), but
*not* to release resources (2).
Link: https://lore.kernel.org/r/20250621195118.124245-7-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement generic accessors for the private data of a driver bound to a
device.
Those accessors should be used by bus abstractions from their
corresponding core callbacks, such as probe(), remove(), etc.
Implementing them for device::CoreInternal guarantees that driver's can't
interfere with the logic implemented by the bus abstraction.
Acked-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250621195118.124245-3-dakr@kernel.org
[ Improve safety comment as proposed by Benno. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Introduce an internal device context, which is semantically equivalent
to the Core device context, but reserved for bus abstractions.
This allows implementing methods for the Device type, which are limited
to be used within the core context of bus abstractions, i.e. restrict
the availability for drivers.
Link: https://lore.kernel.org/r/20250621195118.124245-2-dakr@kernel.org
[ Rename device::Internal to device::CoreInternal. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add in a probe function for GICv5 which enables support for GICv3
guests on a GICv5 host, if FEAT_GCIE_LEGACY is supported by the
hardware.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-6-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add support for GICv3 compat mode (FEAT_GCIE_LEGACY) which allows a
GICv5 host to run GICv3-based VMs. This change enables the
VHE/nVHE/hVHE/protected modes, but does not support nested
virtualization.
A lazy-disable approach is taken for compat mode; it is enabled on the
vgic_v3_load path but not disabled on the vgic_v3_put path. A
non-GICv3 VM, i.e., one based on GICv5, is responsible for disabling
compat mode on the corresponding vgic_v5_load path. Currently, GICv5
is not supported, and hence compat mode is not disabled again once it
is enabled, and this function is intentionally omitted from the code.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-5-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This system register is required to enable/disable V3 legacy mode when
running on a GICv5 host.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-4-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Populate the gic_kvm_info struct based on support for
FEAT_GCIE_LEGACY. The struct is used by KVM to probe for a compatible
GIC.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20250627100847.1022515-3-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
If a PPI interrupt is forwarded to a guest, skip the deactivate and
only EOI. Rely on the guest deactivating both the virtual and physical
interrupts (due to ICH_LRx_EL2.HW being set) later on as part of
handling the injected interrupt. This mimics the behaviour seen on
native GICv3.
This is part of adding support for the GICv3 compatibility mode on a
GICv5 host.
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Link: https://lore.kernel.org/r/20250627100847.1022515-2-sascha.bischoff@arm.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The first patch fixes an embarrassing bug in the pwm core. I really
wonder this wasn't found earlier since it's introduction in v6.11-rc1 as
it greatly disturbs driving a PWM via sysfs.
The second and last patch fixes a clock balance issue in an error path
of the Mediatek PWM driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmhtdYQACgkQj4D7WH0S
/k4kvQf/fLD1Q3NIGw1bgsvfgaiSqIGzKrIdg8TgiVxNRnT5GNhRnRcD9gkBfICe
gfCBLNqCGETFvnL/W8hLXSeUyHDJqPcKLxUUfajU9pjNdqzb4/1Lik0BW4eI7c9o
BWBvslFG0X60gqzAIpRfcXP0jyF7lKTFK8R85tp2lY3EoGwSnpReMtO7Z1Cto190
o87t6+U96eJ61RQfI52EiX+IbUOQC/2Lj41nIw1E28eo7Y6TeHp1xOXagS8wTGDq
SVVhObmUyOU/iRpY+CmwZWw6oylGps34MhlJBF+IpNVJRvEBH//IZRaNC53ZO2x5
LrGMBACjfB17UU0O1AE/Qwc6yzmS/g==
=yu7G
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two fixes for v6.16-rc6
The first patch fixes an embarrassing bug in the pwm core. I really
wonder this wasn't found earlier since it's introduction in v6.11-rc1
as it greatly disturbs driving a PWM via sysfs.
The second and last patch fixes a clock balance issue in an error path
of the Mediatek PWM driver"
* tag 'pwm/for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: mediatek: Ensure to disable clocks in error path
pwm: Fix invalid state detection
This includes 2 fixes: one introduced in the current release cycle (v6.16-rc1)
and another introduced back in v6.4-rc1. Both have been in linux-next since
next-250701 and have passed the modules ci tests using kdevops. Finally, as Petr
and Luis mentioned in previous pull requests, add myself (Daniel Gomez) to the
list of modules maintainers.
The first was reported by Intel's kernel test robot, and it addresses a crash
exposed by Sebastian's commit c50d295c37 ("rds: Use nested-BH locking for
rds_page_remainder") by allowing relocations for the per-CPU section even if it
lacks the SHF_ALLOC flag. Petr and Sebastian went down to the archive history
(before Git) and found the commit that broke it b3b91325f3c7 ("Don't relocate
non-allocated regions in modules.").
The second fix, reported and fixed by Petr (with additional cleanup), resolves a
memory leak by ensuring proper deallocation if module loading fails. We couldn't
find a reproducer other than forcing it manually or leveraging eBPF. So, I
tested it by enabling error injection in the codetag functions through the error
path that produces the leak and made it fail until execmem is unable to allocate
more memory.
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
-----BEGIN PGP SIGNATURE-----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=dQvQ
-----END PGP SIGNATURE-----
Merge tag 'modules-6.16-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull modules fixes from Daniel Gomez:
"This includes two fixes: one introduced in the current release cycle
and another introduced back in v6.4-rc1. Additionally, as Petr and
Luis mentioned in previous pull requests, add myself (Daniel Gomez) to
the list of modules maintainers.
The first was reported by Intel's kernel test robot, and it addresses
a crash exposed by Sebastian's commit c50d295c37 ("rds: Use
nested-BH locking for rds_page_remainder") by allowing relocations for
the per-CPU section even if it lacks the SHF_ALLOC flag.
Petr and Sebastian went down to the archive history (before Git) and
found the commit that broke it at [1] / [2] ("Don't relocate
non-allocated regions in modules.").
The second fix, reported and fixed by Petr (with additional cleanup),
resolves a memory leak by ensuring proper deallocation if module
loading fails.
We couldn't find a reproducer other than forcing it manually or
leveraging eBPF. So, I tested it by enabling error injection in the
codetag functions through the error path that produces the leak and
made it fail until execmem is unable to allocate more memory"
Link: https://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux-fullhistory.git/commit/?id=b3b91325f3c7 [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=1a6100caae [2]
* tag 'modules-6.16-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
MAINTAINERS: update Daniel Gomez's role and email address
module: Make sure relocations are applied to the per-CPU section
module: Avoid unnecessary return value initialization in move_module()
module: Fix memory deallocation on error path in move_module()
xe_bo_evict_all() is called after xe_display_pm_suspend(). So if there
is error with xe_bo_evict_all(), display pm should be restored.
Fixes: 51462211f4 ("drm/xe/pxp: add PXP PM support")
Fixes: cb8f81c175 ("drm/xe/display: Make display suspend/resume work on discrete")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250708035424.3608190-2-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Under some circumstances, the compiler will emit the following warning for
rxrpc_send_response():
net/rxrpc/output.c: In function 'rxrpc_send_response':
net/rxrpc/output.c:974:1: warning: the frame size of 1160 bytes is larger than 1024 bytes
This occurs because the local variables include a 16-element scatterlist
array and a 16-element bio_vec array. It's probably not actually a problem
as this function is only called by the rxrpc I/O thread function in a
kernel thread and there won't be much on the stack before it.
Fix this by overlaying the bio_vec array over the kvec array in the
rxrpc_local struct. There is one of these per I/O thread and the kvec
array is intended for pointing at bits of a packet to be transmitted,
typically a DATA or an ACK packet. As packets for a local endpoint are
only transmitted by its specific I/O thread, there can be no race, and so
overlaying this bit of memory should be no problem.
Fixes: 5800b1cf3f ("rxrpc: Allow CHALLENGEs to the passed to the app for a RESPONSE")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506240423.E942yKJP-lkp@intel.com/
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250707102435.2381045-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an issue
that causes system oopses and panics when performing TLB flush using
INVLPGB.
However, the problem is that that machine has misconfigured CPUID and
should not report the INVLPGB bit in the first place. So zap the
kernel's representation of the flag so that nothing gets confused.
[ bp: Massage. ]
Fixes: 767ae437a3 ("x86/mm: Add INVLPGB feature and Kconfig entry")
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/1ebe845b-322b-4929-9093-b41074e9e939@mixaill.net
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an error that
causes RDSEED to always return 0xffffffff, while RDRAND works correctly.
Mask the RDSEED cap for this CPU so that both /proc/cpuinfo and direct CPUID
read report RDSEED as unavailable.
[ bp: Move to amd.c, massage. ]
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250524145319.209075-1-me@mixaill.net
This started showing up more when we started logging the error being
corrected in the journal - but __bch2_fsck_err() could return
transaction restarts before that.
Setting BCH_FS_error incorrectly causes recovery passes to not be
cleared, among other issues.
Fixes: b43f724927 ("bcachefs: Log fsck errors in the journal")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Tomas' fix for __BITS_PER_LONG was effectively reverted by a wrong
merge. Fix it and add the related files to MAINTAINERS.
-----BEGIN PGP SIGNATURE-----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=chSO
-----END PGP SIGNATURE-----
Merge tag 'bitmap-for-6.16-rc6' of https://github.com/norov/linux
Pull bitops UAPI fix from Yury Norov:
"Fix BITS_PER_LONG merge error
Tomas' fix for __BITS_PER_LONG was effectively reverted by a wrong
merge. Fix it and add the related files to MAINTAINERS"
* tag 'bitmap-for-6.16-rc6' of https://github.com/norov/linux:
MAINTAINERS: bitmap: add UAPI headers
uapi: bitops: use UAPI-safe variant of BITS_PER_LONG again (2)
crypto/hash_info.c just contains a couple of arrays that map HASH_ALGO_*
algorithm IDs to properties of those algorithms. It is compiled only
when CRYPTO_HASH_INFO=y, but currently CRYPTO_HASH_INFO depends on
CRYPTO. Since this can be useful without the old-school crypto API,
move it into lib/crypto/ so that it no longer depends on CRYPTO.
This eliminates the need for FS_VERITY to select CRYPTO after it's been
converted to use lib/crypto/.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250630172224.46909-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Now that we don't have the compat code we can reduce the indent
a little. No functional changes.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250707184115.2285277-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers are now converted to dedicated _rxfh_context ops.
Remove the use of >set_rxfh() to manage additional contexts.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250707184115.2285277-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert mlx5 to dedicated RXFH ops. This is a fairly shallow
conversion, TBH, most of the driver code stays as is, but we
let the core allocate the context ID for the driver.
mlx5e_rx_res_rss_get_rxfh() and friends are made void, since
core only calls the driver for context 0. The second call
is right after context creation so it must exist (tm).
Tested with drivers/net/hw/rss_ctx.py on MCX6.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250707184115.2285277-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ICE appears to have some odd form of rss_context use plumbed
in for .get_rxfh. The .set_rxfh side does not support creating
contexts, however, so this must be dead code. For at least a year
now (since commit 7964e78846 ("net: ethtool: use the tracking
array for get_rxfh on custom RSS contexts")) we have not been
calling .get_rxfh with a non-zero rss_context. We just get
the info from the RSS XArray under dev->ethtool.
Remove what must be dead code in the driver, clear the support flags.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250707184115.2285277-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
otx2 only supports additional indirection tables (no separate keys
etc.) so the conversion to dedicated callbacks and core-allocated
context is mostly removing the code which stores the extra tables
in the driver. Core already stores the indirection tables for
additional contexts, and doesn't call .get for them.
One subtle change here is that we'll now start with the table
covering all queues, not directing all traffic to queue 0.
This is what core expects if the user doesn't pass the initial
indir table explicitly (there's a WARN_ON() in the core trying
to make sure driver authors don't forget to populate ctx to
defaults).
Drivers implementing .create_rxfh_context don't have to set
cap_rss_ctx_supported, so remove it.
Tested-by: Geetha Sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250707184115.2285277-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
