As a preparation to further MDSS-revision cleanups stop passing MDSS
revision to the setup_timing_gen() callback. Instead store a pointer to
it inside struct dpu_hw_intf and use it diretly. It's not that the MDSS
revision can chance between dpu_hw_intf_init() and
dpu_encoder_phys_vid_setup_timing_engine().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/655362/
Link: https://lore.kernel.org/r/20250522-dpu-drop-features-v5-1-3b2085a07884@oss.qualcomm.com
Move work queue allocation into a helper for a more streamlined function
body.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250704130754.89935-1-tvrtko.ursulin@igalia.com
pointless in ->read()/->write() of file_operations used only via
debugfs_create_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://patch.msgid.link/20250702211602.GC3406663@ZenIV
Signed-off-by: Mark Brown <broonie@kernel.org>
arm64 depends on the cpufreq driver to gain the maximum cpu frequency
to convert the watchdog_thresh to perf event period. cpufreq drivers
like cppc_cpufreq will be initialized lately after the initializing of
the hard lockup detector so just use a safe cpufreq which will be
inaccurency. Use a cpufreq notifier to adjust the event's period to
a more accurate one.
Reviewed-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250701110214.27242-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Architecture's using perf events for hard lockup detection needs to
convert the watchdog_thresh to the event's period, some architecture
for example arm64 perform this conversion using the CPU's maximum
frequency which will be acquired by cpufreq. However by the time
the lockup detector's initialized the cpufreq driver may not be
initialized, thus launch a watchdog with inaccurate period. Provide
a function hardlockup_detector_perf_adjust_period() to allowing
adjust the event period. Then architecture can update with more
accurate period if cpufreq is initialized.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250701110214.27242-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075444.3221445-1-sakari.ailus@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Cheng-Yi Chiang <cychiang@chromium.org>
Link: https://patch.msgid.link/20250703183523.2075276-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There looks to be an issue in our compression handling when the BO pages
are very fragmented, where we choose to skip the identity map and
instead fall back to emitting the PTEs by hand when migrating memory,
such that we can hopefully do more work per blit operation. However in
such a case we need to ensure the src PTEs are correctly tagged with a
compression enabled PAT index on dgpu xe2+, otherwise the copy will
simply treat the src memory as uncompressed, leading to corruption if
the memory was compressed by the user.
To fix this pass along use_comp_pat into emit_pte() on the src side, to
indicate that compression should be considered.
v2 (Jonathan): tweak the commit message
Fixes: 523f191cc0 ("drm/xe/xe_migrate: Handle migration logic for xe2+ dgfx")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Akshata Jahagirdar <akshata.jahagirdar@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250701103949.83116-2-matthew.auld@intel.com
Ensure that we've got at least some coverage of the special cases around
vfork() by adding a test case in basic-gcs doing the same thing as the
plain fork() one - vfork(), do a few checks and then return to the parent.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250703-arm64-gcs-vfork-exit-v3-3-1e9a9d2ddbbe@kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To allow testing of vfork() support in the arm64 basic-gcs test provide an
implementation for nolibc, using the vfork() syscall if one is available
and otherwise clone3(). We implement in terms of clone3() since the order
of the arguments for clone() varies between architectures.
As for fork() SPARC returns the parent PID rather than 0 in the child
for vfork() so needs custom handling.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250703-arm64-gcs-vfork-exit-v3-2-1e9a9d2ddbbe@kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Thomas has requested that if defined() be used in place of ifdef but
currently ifdef is used consistently in sys.h. Update all the instances of
ifdef to if defined().
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250703-arm64-gcs-vfork-exit-v3-1-1e9a9d2ddbbe@kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add support for SuperH/"sh" to nolibc.
Only sh4 is tested for now.
The startup code is special:
__nolibc_entrypoint_epilogue() calls __builtin_unreachable() which emits
a call to abort(). To make this work a function prologue is generated to
set up a GOT pointer which corrupts "sp".
__builtin_unreachable() is necessary for __attribute__((noreturn)).
Also depending on compiler flags (for example -fPIC) even more prologue
is generated.
Work around this by defining a nested function in asm.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70216
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Acked-by: Rob Landley <rob@landley.net>
Acked-by: D. Jeff Dionne <jeff@coresemi.io>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20250623-nolibc-sh-v2-3-0f5b4b303025@weissschuh.net
Rename it to VIRTIO_PCIDEV_STAT_WAITING to make the code slightly
more consistent. It was missed when refactoring virtio_pcidev into
a separate module.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250606124428.148164-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
I received a kernel-test-bot report[1] that shows the
[-Wunused-but-set-variable] warning. Since the previous commit I made, as
the 'Fixes' tag shows, gives users an option to turn on and off the
CONFIG_RFS_ACCEL, the issue then can be discovered and reproduced with
GCC specifically.
Like Simon and Jakub suggested, use fewer #ifdefs which leads to fewer
bugs.
[1]
All warnings (new ones prefixed by >>):
drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_request_irq':
>> drivers/net/ethernet/broadcom/bnxt/bnxt.c:10703:9: warning: variable 'j' set but not used [-Wunused-but-set-variable]
10703 | int i, j, rc = 0;
| ^
Fixes: 9b6a30febd ("net: allow rps/rfs related configs to be switched")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506282102.x1tXt0qz-lkp@intel.com/
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
STM32MP157F-DK2 board embeds a STM32MP157F SoC. This SoC contains the same
level of feature than a STM32MP157C SOC but A7 clock frequency can reach
800MHz, hence the inclusion of the newly introduced stm32mp15xf.dtsi.
As for other latest STM32 MPU families, STM32MP157F-DK2 relies on OP-TEE
SCMI services for SoC clock and reset controllers resources, and for PMIC,
now under OP-TEE control. That's why stm32mp157f-dk2-scmi.dtsi is
introduced, to move all clocks, resets and regulators to SCMI-based ones.
To "disable" SCMI, just need to comment stm32mp157f-dk2-scmi.dtsi inclusion
and to replace &scmi_v3v3 with &v3v3, then to disable arm_wdt and to enable
i2c4 and its subnodes for PMIC support by Linux. Reconfigure usbotg for
dual role with type-C support if needed.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-7-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the "st,stm32mp157f-dk2" compatible string to the STM32 SoC
bindings. The MP157F is functionally similar to the MP157C.
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-6-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
These bindings will be used for the SCMI voltage domain.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Pascal Paillet <p.paillet@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-3-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Adopt generic node name 'typec' for stusb1600, which is the USB Type-C
controller on stm32mp157x Discovery Kits.
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-2-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This commit creates new file to manage security features and supported OPP
on STM32MP15xF SOCs. On STM32MP15xY, "Y" gives information:
-Y = A means no cryp IP and no secure boot + A7-CPU@650MHz.
-Y = C means cryp IP + optee + secure boot + A7-CPU@650MHz.
-Y = D means no cryp IP and no secure boot + A7-CPU@800MHz.
-Y = F means cryp IP + optee + secure boot + A7-CPU@800MHz.
It fullfills the initial STM32MP15x SoC diversity introduced by
commit 0eda69b6c5 ("ARM: dts: stm32: Manage security diversity
for STM32M15x SOCs").
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250603-stm32mp157f-dk2-v2-1-5be0854a9299@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The commit 5725bce709
("ASoC: simple-card-utils: Unify clock direction by clk_direction")
corrupts the audio on STM32MP15 DK sound cards.
The parent clock is not correctly set, because set_sai_ck_rate() is not
executed in stm32_sai_set_sysclk() callback.
This occurs because set_sysclk() is called with the wrong direction,
SND_SOC_CLOCK_IN instead of SND_SOC_CLOCK_OUT.
Add system-clock-direction-out property in SAI2A endpoint node of
STM32MP15XX-DKX device tree, to specify the MCLK clock direction.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20250521150418.488152-1-olivier.moysan@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Enable the STM32 timer drivers: MFD, counter, PWM and trigger as module.
These drivers can be used on STM32MP25.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-6-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Configure timer nodes on stm32mp257f-ev1:
- Timer3 CH2 is available on mikroBUS connector for PWM
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
on EXPANSION connector.
Timers are kept disabled by default, so the pins can be used for any
other purpose (and the timers can be assigned to any of the processors).
Arbitrary choice is to use all these timers as PWM (or counter on
internal clock signal), except for timer10 that is configured with
CH1 as an input (for capture).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-9-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add timer pins available on stm32mp257f-ev1, configured for PWM:
- timer3 CH2 is available on mikroBUS connector
- timer8 CH1, timer8 CH4, timer10 CH1 and timer12 CH2 are available
on EXPANSION connector
Arbitrary define all these pins to be used as PWM (output) channels,
except for timer10 CH1, to be used as counter input.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-8-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add timers support on STM32MP25 SoC. Use dedicated compatible to handle
new features and instances introduced with this SoC. STM32MP25 SoC has
various timer flavours, each group has its own specific feature list:
- Advanced-control timers (TIM1/TIM8/TIM20)
- General-purpose timers (TIM2/TIM3/TIM4/TIM5)
- Basic timers (TIM6/TIM7)
- General-purpose timers (TIM10/TIM11/TIM12/TIM13/TIM14)
- General purpose timers (TIM15/TIM16/TIM17)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-7-fabrice.gasnier@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
With the renaming of libata-eh ata_set_mode() function to
ata_eh_set_mode(), libata-core function ata_do_set_mode() can now be
renamed to the simpler ata_set_mode().
All the call sites of the former ata_do_set_mode() are updated to use
the new function name.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250703103622.291272-5-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The function ata_set_mode() is defined and used only in libata-eh.c.
Make this function static and rename it ata_eh_set_mode() to make it
clear where its definition is.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250703103622.291272-4-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The function ata_dev_cleanup_cdl_resources() is called only from
ata_dev_init_cdl_resources() and ata_dev_free_resources() which are
both defined in drivers/ata/libata-core.c. So there is no need for
ata_dev_cleanup_cdl_resources() to be visible from outside of this
file. Change this function definition to be a static function.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250703103622.291272-3-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The function ata_log_supported() tests if a log page is supported by a
device using the General Purpose Log Directory log page, which lists the
size of all surported log pages. However, this log page is read from the
device using ata_read_log_page() every time ata_log_supported() is
called. That is not necessary.
Avoid reading the General Purpose Log Directory log page by caching its
content in the gp_log_dir buffer defined as part of struct ata_device.
The functions ata_read_log_directory() and ata_clear_log_directory() are
introduced to manage this buffer. ata_clear_log_directory() zero-fill
the gp_log_dir buffer every time ata_dev_configure() is called, that is,
when the device is first scanned and when it is being revalidated.
The function ata_log_supported() is modified to call
ata_read_log_directory() instead of ata_read_log_page().
The function ata_read_log_directory() calls ata_read_log_page() to read
the General Purpose Log Directory log page from the device only if the
first 16-bits word of the log is not equal to 0x0001, that is, it is not
equal to the ACS mandated value for the log version.
With this, the log page is read from the device only once for every
ata_dev_configure() call. For instance, with pr_debug enabled, a call
to ata_dev_configure() before this patch generates the following log
page accesses:
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x13, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x12, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x8
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x3
ata3.00: read log page - log 0x30, page 0x4
ata3.00: read log page - log 0x18, page 0x0
That is, the general purpose log directory page is read 7 times.
With this patch applied, the number of accesses to this log page is
reduced to one:
ata3.00: read log page - log 0x0, page 0x0
ata3.00: read log page - log 0x13, page 0x0
ata3.00: read log page - log 0x12, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x8
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x0
ata3.00: read log page - log 0x30, page 0x3
ata3.00: read log page - log 0x30, page 0x4
ata3.00: read log page - log 0x18, page 0x0
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250703103622.291272-2-dlemoal@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
In our testing with 6.12 based kernel on a big.LITTLE system, we were
seeing instances of RT tasks being blocked from running on the LITTLE
cpus for multiple seconds of time, apparently by the dl_server. This
far exceeds the default configured 50ms per second runtime.
This is due to the fair dl_server runtime calculation being scaled
for frequency & capacity of the cpu.
Consider the following case under a Big.LITTLE architecture:
Assume the runtime is: 50,000,000 ns, and Frequency/capacity
scale-invariance defined as below:
Frequency scale-invariance: 100
Capacity scale-invariance: 50
First by Frequency scale-invariance,
the runtime is scaled to 50,000,000 * 100 >> 10 = 4,882,812
Then by capacity scale-invariance,
it is further scaled to 4,882,812 * 50 >> 10 = 238,418.
So it will scaled to 238,418 ns.
This smaller "accounted runtime" value is what ends up being
subtracted against the fair-server's runtime for the current period.
Thus after 50ms of real time, we've only accounted ~238us against the
fair servers runtime. This 209:1 ratio in this example means that on
the smaller cpu the fair server is allowed to continue running,
blocking RT tasks, for over 10 seconds before it exhausts its supposed
50ms of runtime. And on other hardware configurations it can be even
worse.
For the fair deadline_server, to prevent realtime tasks from being
unexpectedly delayed, we really do want to use fixed time, and not
scaled time for smaller capacity/frequency cpus. So remove the scaling
from the fair server's accounting to fix this.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: John Stultz <jstultz@google.com>
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250702021440.2594736-1-kuyo.chang@mediatek.com
Commit <4f1492efb4> ("iommu/vt-d: Revert ATS timing change to fix boot
failure") placed the enabling of ATS in the probe_finalize callback. This
occurs after the default domain attachment, which is when the ATS cache
tag is assigned. Consequently, the device TLB cache tag is missed when the
domain is attached, leading to the device TLB not being invalidated in the
iommu_unmap paths.
Fix this by assigning the CACHE_TAG_DEVTLB cache tag when ATS is enabled.
Fixes: 4f1492efb4 ("iommu/vt-d: Revert ATS timing change to fix boot failure")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250625050135.3129955-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250628100351.3198955-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Krzysztof points out that although the driver now supports COMPILE_TEST
for other architectures, it does not build cleanly with W=1 where the
stubbed-out ARM API can lead to an unused variable warning.
Since this is effectively the correct intent of the code in such cases,
mark it as __maybe_unused, tidying up some cruft in the process.
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/7c78149504900bc6c98a9c48f4418934b72d89ac.1751036478.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The GPIO expander is connected via I2C, thus the can_sleep flag has to
be set to true. This fixes spurious "scheduling while atomic" bugs
in the kernel ringbuffer.
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Milan Krstic <milan.krstic@gmail.com>
Link: https://lore.kernel.org/20250703143039.5809-1-milan.krstic@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 74abd086d2 ("gpiolib: sanitize the return value of
gpio_chip::get_multiple()") altered the value returned by
gc->get_multiple() in case it is positive (> 0), but failed to return
for other cases (<= 0).
This may result in the "if (gc->get)" block being executed and thus
negates the performance gain that is normally obtained by using
gc->get_multiple().
Fix by returning the result of gc->get_multiple() if it is <= 0.
Also move the "ret" variable to the scope where it is used, which as an
added bonus fixes an indentation error introduced by the aforementioned
commit.
Fixes: 74abd086d2 ("gpiolib: sanitize the return value of gpio_chip::get_multiple()")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250703191829.2952986-1-hugo@hugovil.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The original comment doesn't match the pin attribution, probably due
to a hasty copy/paste.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://lore.kernel.org/20250701201124.812882-2-paulk@sys-base.io
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs,
- Convert the RZ/V2M External Power Sequence Controller (PWC) driver
to the new GPIO line value setter callbacks.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaF6DRAAKCRCKwlD9ZEnx
cGT9AP9wrVG3ZT8zlmXz0BdPj951AN5CG411YUxnMdRtc9orMAEAxaY1rq5IC88g
jCYoncT54L8EhCryPoQoPkUiE6/ingE=
=rPPp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jXdR
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.17
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs,
- Convert the RZ/V2M External Power Sequence Controller (PWC) driver
to the new GPIO line value setter callbacks.
* tag 'renesas-drivers-for-v6.17-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: pwc-rzv2m: Use new GPIO line value setter callbacks
soc: renesas: Add RZ/N2H (R9A09G087) config option
soc: renesas: Add RZ/T2H (R9A09G077) config option
Link: https://lore.kernel.org/r/cover.1751026661.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a logical continuation of the earlier work to create pidfds for
reaped tasks through the SO_PEERPIDFD socket option merged in
923ea4d448 ("Merge patch series "net, pidfs: enable handing out pidfds
for reaped sk->sk_peer_pid"").
* patches from https://lore.kernel.org/20250703222314.309967-1-aleksandr.mikhalitsyn@canonical.com:
selftests: net: extend SCM_PIDFD test to cover stale pidfds
af_unix: enable handing out pidfds for reaped tasks in SCM_PIDFD
af_unix: stash pidfs dentry when needed
af_unix/scm: fix whitespace errors
af_unix: introduce and use scm_replace_pid() helper
af_unix: introduce unix_skb_to_scm helper
af_unix: rework unix_maybe_add_creds() to allow sleep
Link: https://lore.kernel.org/20250703222314.309967-1-aleksandr.mikhalitsyn@canonical.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Extend SCM_PIDFD test scenarios to also cover dead task's
pidfd retrieval and reading its exit info.
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: David Rheinsberg <david@readahead.eu>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/20250703222314.309967-8-aleksandr.mikhalitsyn@canonical.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now everything is ready to pass PIDFD_STALE to pidfd_prepare().
This will allow opening pidfd for reaped tasks.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: David Rheinsberg <david@readahead.eu>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/20250703222314.309967-7-aleksandr.mikhalitsyn@canonical.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We need to ensure that pidfs dentry is allocated when we meet any
struct pid for the first time. This will allows us to open pidfd
even after the task it corresponds to is reaped.
Basically, we need to identify all places where we fill skb/scm_cookie
with struct pid reference for the first time and call pidfs_register_pid().
Tricky thing here is that we have a few places where this happends
depending on what userspace is doing:
- [__scm_replace_pid()] explicitly sending an SCM_CREDENTIALS message
and specified pid in a numeric format
- [unix_maybe_add_creds()] enabled SO_PASSCRED/SO_PASSPIDFD but
didn't send SCM_CREDENTIALS explicitly
- [scm_send()] force_creds is true. Netlink case, we don't need to touch it.
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
Cc: Luca Boccassi <bluca@debian.org>
Cc: David Rheinsberg <david@readahead.eu>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Link: https://lore.kernel.org/20250703222314.309967-6-aleksandr.mikhalitsyn@canonical.com
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
