struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-7-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-4-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250625-gpiochip-set-rv-gpio-round2-v1-3-bc110a3b52ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO core can handle input-only chips that don't implement the
direction_output() callback at all. There's no need for the driver to
provide a dummy implementation so drop it.
Link: https://lore.kernel.org/r/20250625081222.12744-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Many error paths in tlmi_sysfs_init() lead to sysfs groups being removed
when they were not even created.
Fix this by letting the kobject core manage these groups through their
kobj_type's defult_groups.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-3-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In tlmi_analyze(), allocated structs with an embedded kobject are freed
in error paths after the they were already initialized.
Fix this by first by avoiding the initialization of kobjects in
tlmi_analyze() and then by correctly cleaning them up in
tlmi_release_attr() using their kset's kobject list.
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Fixes: 30e78435d3 ("platform/x86: think-lmi: Split kobject_init() and kobject_add() calls")
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-2-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Avoid entering tlmi_release_attr() in error paths if both ksets are not
yet created.
This is accomplished by initializing them side by side.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250630-lmi-fix-v3-1-ce4f81c9c481@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI
Netlink message, which triggers the kernel function xfrm_alloc_spi().
This function is expected to ensure uniqueness of the Security Parameter
Index (SPI) for inbound Security Associations (SAs). However, it can
return success even when the requested SPI is already in use, leading
to duplicate SPIs assigned to multiple inbound SAs, differentiated
only by their destination addresses.
This behavior causes inconsistencies during SPI lookups for inbound packets.
Since the lookup may return an arbitrary SA among those with the same SPI,
packet processing can fail, resulting in packet drops.
According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA
is uniquely identified by the SPI and optionally protocol.
Reproducing the Issue Reliably:
To consistently reproduce the problem, restrict the available SPI range in
charon.conf : spi_min = 0x10000000 spi_max = 0x10000002
This limits the system to only 2 usable SPI values.
Next, create more than 2 Child SA. each using unique pair of src/dst address.
As soon as the 3rd Child SA is initiated, it will be assigned a duplicate
SPI, since the SPI pool is already exhausted.
With a narrow SPI range, the issue is consistently reproducible.
With a broader/default range, it becomes rare and unpredictable.
Current implementation:
xfrm_spi_hash() lookup function computes hash using daddr, proto, and family.
So if two SAs have the same SPI but different destination addresses, then
they will:
a. Hash into different buckets
b. Be stored in different linked lists (byspi + h)
c. Not be seen in the same hlist_for_each_entry_rcu() iteration.
As a result, the lookup will result in NULL and kernel allows that Duplicate SPI
Proposed Change:
xfrm_state_lookup_spi_proto() does a truly global search - across all states,
regardless of hash bucket and matches SPI and proto.
Signed-off-by: Aakash Kumar S <saakashkumar@marvell.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
A GEM handle can be released while the GEM buffer object is attached
to a DRM framebuffer. This leads to the release of the dma-buf backing
the buffer object, if any. [1] Trying to use the framebuffer in further
mode-setting operations leads to a segmentation fault. Most easily
happens with driver that use shadow planes for vmap-ing the dma-buf
during a page flip. An example is shown below.
[ 156.791968] ------------[ cut here ]------------
[ 156.796830] WARNING: CPU: 2 PID: 2255 at drivers/dma-buf/dma-buf.c:1527 dma_buf_vmap+0x224/0x430
[...]
[ 156.942028] RIP: 0010:dma_buf_vmap+0x224/0x430
[ 157.043420] Call Trace:
[ 157.045898] <TASK>
[ 157.048030] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.052436] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.056836] ? show_trace_log_lvl+0x1af/0x2c0
[ 157.061253] ? drm_gem_shmem_vmap+0x74/0x710
[ 157.065567] ? dma_buf_vmap+0x224/0x430
[ 157.069446] ? __warn.cold+0x58/0xe4
[ 157.073061] ? dma_buf_vmap+0x224/0x430
[ 157.077111] ? report_bug+0x1dd/0x390
[ 157.080842] ? handle_bug+0x5e/0xa0
[ 157.084389] ? exc_invalid_op+0x14/0x50
[ 157.088291] ? asm_exc_invalid_op+0x16/0x20
[ 157.092548] ? dma_buf_vmap+0x224/0x430
[ 157.096663] ? dma_resv_get_singleton+0x6d/0x230
[ 157.101341] ? __pfx_dma_buf_vmap+0x10/0x10
[ 157.105588] ? __pfx_dma_resv_get_singleton+0x10/0x10
[ 157.110697] drm_gem_shmem_vmap+0x74/0x710
[ 157.114866] drm_gem_vmap+0xa9/0x1b0
[ 157.118763] drm_gem_vmap_unlocked+0x46/0xa0
[ 157.123086] drm_gem_fb_vmap+0xab/0x300
[ 157.126979] drm_atomic_helper_prepare_planes.part.0+0x487/0xb10
[ 157.133032] ? lockdep_init_map_type+0x19d/0x880
[ 157.137701] drm_atomic_helper_commit+0x13d/0x2e0
[ 157.142671] ? drm_atomic_nonblocking_commit+0xa0/0x180
[ 157.147988] drm_mode_atomic_ioctl+0x766/0xe40
[...]
[ 157.346424] ---[ end trace 0000000000000000 ]---
Acquiring GEM handles for the framebuffer's GEM buffer objects prevents
this from happening. The framebuffer's cleanup later puts the handle
references.
Commit 1a148af060 ("drm/gem-shmem: Use dma_buf from GEM object
instance") triggers the segmentation fault easily by using the dma-buf
field more widely. The underlying issue with reference counting has
been present before.
v2:
- acquire the handle instead of the BO (Christian)
- fix comment style (Christian)
- drop the Fixes tag (Christian)
- rename err_ gotos
- add missing Link tag
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.15/source/drivers/gpu/drm/drm_gem.c#L241 # [1]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250630084001.293053-1-tzimmermann@suse.de
The skb transport header pointer needs to be adjusted by network header
pointer plus the size of the ipcomp header.
This shows up when running traffic over ipcomp using transport mode.
After being reinjected, packets are dropped because the header isn't
adjusted properly and some checks can be triggered. E.g the skb is
mistakenly considered as IP fragmented packet and later dropped.
kworker/30:1-mm 443 [030] 102.055250: skb:kfree_skb:skbaddr=0xffff8f104aa3ce00 rx_sk=(
ffffffff8419f1f4 sk_skb_reason_drop+0x94 ([kernel.kallsyms])
ffffffff8419f1f4 sk_skb_reason_drop+0x94 ([kernel.kallsyms])
ffffffff84281420 ip_defrag+0x4b0 ([kernel.kallsyms])
ffffffff8428006e ip_local_deliver+0x4e ([kernel.kallsyms])
ffffffff8432afb1 xfrm_trans_reinject+0xe1 ([kernel.kallsyms])
ffffffff83758230 process_one_work+0x190 ([kernel.kallsyms])
ffffffff83758f37 worker_thread+0x2d7 ([kernel.kallsyms])
ffffffff83761cc9 kthread+0xf9 ([kernel.kallsyms])
ffffffff836c3437 ret_from_fork+0x197 ([kernel.kallsyms])
ffffffff836718da ret_from_fork_asm+0x1a ([kernel.kallsyms])
Fixes: eb2953d269 ("xfrm: ipcomp: Use crypto_acomp interface")
Link: https://bugzilla.suse.com/1244532
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The referenced commit replaced a call to __xfrm4|6_udp_encap_rcv() with
a custom check for non-ESP markers. But what the called function also
did was setting the transport header to the ESP header. The function
that follows, esp4|6_gro_receive(), relies on that being set when it calls
xfrm_parse_spi(). We have to set the full offset as the skb's head was
not moved yet so adding just the UDP header length won't work.
Fixes: e3fd057776 ("xfrm: Fix UDP GRO handling for some corner cases")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The freq_tables[] array has num_possible_cpus() elements so, to avoid an
out of bounds access, this loop should be capped at "< nb_cpus" instead
of "<= nb_cpus". The freq_tables[] array is allocated in
armada_8k_cpufreq_init().
Cc: stable@vger.kernel.org
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
evdev has switched to match on EV_SYN instead of relying on non-zero
driver_info field to allow matching to all devices. Remove special
handling from input core.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each input device has EV_SYN capability. This is enforced by the input
core which sets this capability bit unconditionally in
input_register_device().
Switch evdev matching from declaring non-zero id->driver_info to match
on EV_SYN so that special handling can be removed from
input_match_device() and "driver_info" field can be removed from
input_device_id structure.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This is not only a cosmetic change because the section mismatch checks
also depend on the name and for drivers the checks are stricter than for
ops.
However xircom_driver also passes the stricter checks just fine, so no
further changes needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250627102220.1937649-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not only a cosmetic change because the section mismatch checks
(implemented in scripts/mod/modpost.c) also depend on the object's name
and for drivers the checks are stricter than for ops.
However aq_pci_driver also passes the stricter checks just fine, so no
further changes needed.
The cheating^Wmisleading name was introduced in commit 97bde5c4f9
("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250630164406.57589-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the user reinitializes the network interface, the PHY will reinitialize,
and the CKO settings will revert to their initial configuration(be enabled).
To prevent CKO from being re-enabled,
en8811h_clk_restore_context and en8811h_resume were added
to ensure the CKO settings remain correct.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250630154147.80388-1-lucienzx159@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is no longer available in GTK 3. Use "tooltip-text" instead.
Also reword "Goes up of one level" to "Goes up one level" while I am
here.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
'struct devlink_region_ops' and 'struct hellcreek_fdb_entry' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
55320 19216 320 74856 12468 drivers/net/dsa/hirschmann/hellcreek.o
After:
=====
text data bss dec hex filename
55960 18576 320 74856 12468 drivers/net/dsa/hirschmann/hellcreek.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/2f7e8dc30db18bade94999ac7ce79f333342e979.1751231174.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer says:
====================
seg6: fix typos in comments within the SRv6 subsystem
In this patchset, we correct some typos found both in the SRv6 Endpoints
implementation (i.e., seg6local) and in some SRv6 selftests, using
codespell.
====================
Link: https://patch.msgid.link/20250629171226.4988-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a typo:
instaces -> instances
The typo has been identified using codespell, and the tool does not
report any additional issues in the selftests considered.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629171226.4988-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a typo:
lenghts -> length
The typo has been identified using codespell, and the tool currently
does not report any additional issues in comments.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629171226.4988-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use kcalloc() instead of hand writing it. This is less verbose.
Also move the initialization of 'count' to save some LoC.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
18652 5920 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
After:
=====
text data bss dec hex filename
18498 5920 64 24482 5fa2 drivers/net/dsa/mv88e6xxx/devlink.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/2f4fca4ff84950da71e007c9169f18a0272476f3.1751200453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct devlink_region_ops' and 'struct mv88e6xxx_region' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
18076 6496 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
After:
=====
text data bss dec hex filename
18652 5920 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/46040062161dda211580002f950a6d60433243dc.1751200453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aquantia AQC113(C) using ATL2FW doesn't properly prepare the NIC for
enabling wake-on-lan. The FW operation `set_power` was only implemented
for `hw_atl` and not `hw_atl2`. Implement the `set_power` functionality
for `hw_atl2`.
Tested with both AQC113 and AQC113C devices. Confirmed you can shutdown
the system and wake from S5 using magic packets. NIC was previously
powered off when entering S5. If the NIC was configured for WOL by the
Windows driver, loading the atlantic driver would disable WOL.
Partially cherry-picks changes from commit,
37bd5cc
Attributing original authors from Marvell for the referenced commit.
Closes: https://github.com/Aquantia/AQtion/issues/70
Co-developed-by: Igor Russkikh <irusskikh@marvell.com>
Co-developed-by: Mark Starovoitov <mstarovoitov@marvell.com>
Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Co-developed-by: Pavel Belous <pbelous@marvell.com>
Co-developed-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Eric Work <work.eric@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/20250629051535.5172-1-work.eric@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the Signal Quality Indicator (SQI) feature on KSZ9477
family switches, providing a relative measure of receive signal quality.
The hardware exposes separate SQI readings per channel. For 1000BASE-T,
all four channels are read. For 100BASE-TX, only one channel is reported,
but which receive pair is active depends on Auto MDI-X negotiation, which
is not exposed by the hardware. Therefore, it is not possible to reliably
map the measured channel to a specific wire pair.
This resolves an earlier discussion about how to handle multi-channel
SQI. Originally, the plan was to expose all channels individually.
However, since pair mapping is sometimes unavailable, this
implementation treats SQI as a per-link metric instead. This fallback
avoids ambiguity and ensures consistent behavior. The existing get_sqi()
UAPI was designed for single-pair Ethernet (SPE), where per-pair and
per-link are effectively equivalent. Restricting its use to per-link
metrics does not introduce regressions for existing users.
The raw 7-bit SQI value (0–127, lower is better) is converted to the
standard 0–7 (high is better) scale. Empirical testing showed that the
link becomes unstable around a raw value of 8.
The SQI raw value remains zero if no data is received, even if noise is
present. This confirms that the measurement reflects the "quality" during
active data reception rather than the passive line state. User space
must ensure that traffic is present on the link to obtain valid SQI
readings.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250627112539.895255-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tips are still displayed without this.
This property does not exist in GtkBuilder with GTK 3.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is no need to reconstruct the entire tree store when a symbol's
value changes. Simply call gtk_tree_store_set() to update the row data.
Introduce update_trees() to factor out the common update logic.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The row[] array is used to prepare data passed to set_node(), but this
indirection is unnecessary. Squash fill_row() into set_node() and call
gtk_tree_store_set() directly.
Also, calling gdk_pixbuf_new_from_xpm_data() for every row is
inefficient. Call it once and store the resulting pixbuf in a global
variable.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
These variables are unnecessary because the current model can be
retrieved using gtk_tree_view_get_model().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Currently, update_tree() adds/removes entries to show/hide rows.
This approach is extremely complicated.
Use the tree model filter to control row visibility instead.
Do not toggle the MENU_CHANGED flag, as it is hard to control this
correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Preserve the current menu selection when switching to a different view
mode, as it improves usability.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
