The naming scheme for delay properties includes "delay" in the name,
so renaming spi-cs-setup-ns property to spi-cs-setup-delay-ns.
Fixes: 2c0a1faa4d ("ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its maximum frequency")
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20250521054309.361894-1-manikandan.m@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The at91-sama5d27_wlsom1 SoM has a WILC3000 Wifi chip populated, so select
the CONFIG_WILC1000_SDIO by default.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20250617140502.1042812-2-festevam@gmail.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
As we are converting from TU to usecs, a beacon interval of
100*1024 usecs will lead to integer wrapping. To fix change
to use a u32.
Fixes: 057d5f4ba1 ("mac80211: sync dtim_count to TSF")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In some rare randconfig builds, I seem to trigger a bug in clang where
it unrolls a loop but then runs out of registers, which then get
spilled to the stack:
net/wireless/intel/iwlegacy/4965-rs.c:2262:1: error: stack frame size (1696) exceeds limit (1280) in 'il4965_rs_rate_init' [-Werror,-Wframe-larger-than]
This seems to be the same one I saw in the omapdrm driver, and there is
an easy workaround by not inlining the il4965_rs_rate_scale_clear_win
function.
Link: https://github.com/llvm/llvm-project/issues/143908
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250620113946.3987160-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Userspace tools will parse NL80211_BSS_LAST_SEEN_BOOTTIME (if any) for a
more accurate timing when a BSS was seen. For example, iw, wpa_supplicant.
For beacon and probe response, fill RX boottime_ns in ieee80211_rx_status.
And for certain, it shouldn't count the waiting time for the PPDU status,
i.e. the possible buffering time of a frame in driver.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-6-pkshih@realtek.com
Correct the length when parsing with 2nd IE header and the length
of IE18/19 PHY status report. These two IE contain PHY OFDM signal
information and can be used for debug.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-4-pkshih@realtek.com
EDCCA report is obtained from the hardware to display OBSS interference
and their respective power levels for each subband. Modify the query
settings to improve resolution for debugging purposes.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-3-pkshih@realtek.com
When debugging or recovering system error recovery (SER), it's
necessary to dump internal memory to perform status inspection.
Since the memory page size differs between WiFi 6 and 7 chips,
define them accordingly.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250618124649.11436-2-pkshih@realtek.com
If Wi-Fi isn't connected to AP, the firmware scan will not switch to
operation channel. Bluetooth may not have enough time to TX data. This
patch extend the slot to let Bluetooth can TX more to avoid audio lag.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-10-pkshih@realtek.com
If the duration set to zero, Wi-Fi firmware will trigger some unexpected
issue when firmware try to enable timer.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-9-pkshih@realtek.com
When Wi-Fi firmware scan, it will update the priority tables, and if
stay at these priority tables then enter power saving will trigger
Bluetooth issues. So update the priority before entering power saving.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-8-pkshih@realtek.com
When platform resume, there will have fail rate when Bluetooth try to
re-link. And when Bluetooth is booting up, it will run the ROM code
first, then load the firmware code from file. Catch this change and
set the mechanism for Bluetooth re-link.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-7-pkshih@realtek.com
Because when Wi-Fi/Bluetooth want to communicate with each other, their
contact window are their firmware. So the desired version code is more
reasonable to change with firmware version.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-6-pkshih@realtek.com
The latest Wi-Fi firmware no feature update with Wi-Fi/Bluetooth
coexistence. The patch describe the features support version.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-5-pkshih@realtek.com
Add firmware report to monitor Bluetooth TX power/gain settings, so that
we can check it works as expected or not.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-4-pkshih@realtek.com
The before several patches collect driver information, then this patch
packet these information as outsource info and update to firmware by H2C
command.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-3-pkshih@realtek.com
WiFi 7 generation has dual MAC, Coexistence need to find out the
2GHz WiFi connection in the connected links. And assign its channel
to Bluetooth to make Bluetooth not to hop into WiFi channel.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616090252.51098-2-pkshih@realtek.com
From PTL we need to move to using HDCP2_STREAM_STATUS as a WARN_ON
to see if written content type info is not the same since
HDCP2_AUTH_STREAM is inaccessible to us now.
--v2
-Fix commit message [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250619113340.3379200-3-suraj.kandpal@intel.com
Do not use intel_de_read() inline in the WARN_ON functions.
While we are at it make the comparision for stream_type u8 to u8.
--v2
-Use REG_GENMASK() [Jani]
-USe REG_FIELD_GET() [Jani]
-Fix the WARN_ON() condition [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250619113340.3379200-2-suraj.kandpal@intel.com
Jerome Marchand says:
====================
bpf: Specify access type of bpf_sysctl_get_name args
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype. Until commit 37cce22dbd ("bpf: verifier: Refactor helper
access type tracking") that mistake was hidden by the way the verifier
treated helper accesses. Since then, the verifier, working on wrong
infromation from the prototype, can make faulty optimization that
would had been caught by the test_sysctl selftests if it was run by
the CI.
The first patch fixes bpf_sysctl_get_name prototype.
The second patch converts the test_sysctl to prog_tests so that it
will be run by the CI and catch similar issues in the future.
Changes in v3:
- Use ASSERT* macro instead of CHECK_FAIL.
- Remove useless code.
Changes in v2:
- Replace ARG_PTR_TO_UNINIT_MEM by ARG_PTR_TO_MEM | MEM_WRITE.
- Converts test_sysctl to prog_tests.
====================
Link: https://patch.msgid.link/20250619140603.148942-1-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert test_sysctl test to prog_tests with minimal change to the
tests themselves.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-3-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The second argument of bpf_sysctl_get_name() helper is a pointer to a
buffer that is being written to. However that isn't specify in the
prototype.
Until commit 37cce22dbd ("bpf: verifier: Refactor helper access
type tracking"), all helper accesses were considered as a possible
write access by the verifier, so no big harm was done. However, since
then, the verifier might make wrong asssumption about the content of
that address which might lead it to make faulty optimizations (such as
removing code that was wrongly labeled dead). This is what happens in
test_sysctl selftest to the tests related to sysctl_get_name.
Add MEM_WRITE flag the second argument of bpf_sysctl_get_name().
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250619140603.148942-2-jmarchan@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the EC/ISH starts, it can take a while for all the sensors to be up
and running or declared broken.
If the sensor stack return -EBUSY when checking for sensor information,
retry up to 50 times.
It has been observed 100ms wait time is enough to have valid sensors
ready. It can take more time in case a sensor is really broken and is
not coming up.
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20250623210518.306740-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x3f1/0x560
br_multicast_set_port_router+0x74e/0xac0
br_setport+0xa55/0x1870
br_port_slave_changelink+0x95/0x120
__rtnl_newlink+0x5e8/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr ffff888009f00840 by task bridge/391
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x378/0x560
br_multicast_set_port_router+0x6f9/0xac0
br_vlan_process_options+0x8b6/0x1430
br_vlan_rtm_process_one+0x605/0xa30
br_vlan_rtm_process+0x396/0x4c0
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 2796d846d7 ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Fixes: 4b30ae9adb ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We frequently consult with Jesper's out-of-tree page_pool benchmark to
evaluate page_pool changes.
Import the benchmark into the upstream linux kernel tree so that (a)
we're all running the same version, (b) pave the way for shared
improvements, and (c) maybe one day integrate it with nipa, if possible.
Import bench_page_pool_simple from commit 35b1716d0c30 ("Add
page_bench06_walk_all"), from this repository:
https://github.com/netoptimizer/prototype-kernel.git
Changes done during upstreaming:
- Fix checkpatch issues.
- Remove the tasklet logic not needed.
- Move under tools/testing
- Create ksft for the benchmark.
- Changed slightly how the benchmark gets build. Out of tree, time_bench
is built as an independent .ko. Here it is included in
bench_page_pool.ko
Steps to run:
```
mkdir -p /tmp/run-pp-bench
make -C ./tools/testing/selftests/net/bench
make -C ./tools/testing/selftests/net/bench install INSTALL_PATH=/tmp/run-pp-bench
rsync --delete -avz --progress /tmp/run-pp-bench mina@$SERVER:~/
ssh mina@$SERVER << EOF
cd ~/run-pp-bench && sudo ./test_bench_page_pool.sh
EOF
```
Note that by default, the Makefile will build the benchmark for the
currently installed kernel in /lib/modules/$(shell uname -r)/build. To
build against the current tree, do:
make KDIR=$(pwd) -C ./tools/testing/selftests/net/bench
Output (from Jesper):
```
sudo ./test_bench_page_pool.sh
(benchmark dmesg logs snipped)
Fast path results:
no-softirq-page_pool01 Per elem: 23 cycles(tsc) 6.571 ns
ptr_ring results:
no-softirq-page_pool02 Per elem: 60 cycles(tsc) 16.862 ns
slow path results:
no-softirq-page_pool03 Per elem: 265 cycles(tsc) 73.739 ns
```
Output (from me):
```
sudo ./test_bench_page_pool.sh
(benchmark dmesg logs snipped)
Fast path results:
no-softirq-page_pool01 Per elem: 11 cycles(tsc) 4.177 ns
ptr_ring results:
no-softirq-page_pool02 Per elem: 51 cycles(tsc) 19.117 ns
slow path results:
no-softirq-page_pool03 Per elem: 168 cycles(tsc) 62.469 ns
```
Results of course will vary based on hardware/kernel/configs, and some
variance may be there from run to run due to some noise.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250619181519.3102426-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Frank Wunderlich says:
====================
rework IRQ handling in mtk_eth_soc
From: Frank Wunderlich <frank-w@public-files.de>
This series introduces named IRQs while keeping the index based way
for older dts.
Further it makes some cleanup like adding consts for index access and
avoids loading first IRQ which was not used on non SHARED_INT SoCs.
====================
Link: https://patch.msgid.link/20250619132125.78368-1-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If platform_get_irq_byname returns -ENXIO fall back to legacy (index
based) mode, but on other errors function should return this error.
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619132125.78368-5-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On SoCs with dedicated RX and TX interrupts (all except MT7621 and
MT7628) platform_get_irq() is called for the first IRQ (eth->irq[0])
but it is never used.
Skip the first IRQ and reduce the IRQ-count to 2.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619132125.78368-4-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use consts instead of fixed integers for accessing IRQ array.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20250619132125.78368-3-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add named interrupts and keep index based fallback for existing
devicetrees.
Currently only rx and tx IRQs are defined to be used with mt7988, but
later extended with RSS/LRO support.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619132125.78368-2-linux@fw-web.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
selftests: drv-net: stats: use skip instead of xfail
Alex posted support for configuring pause frames in fbnic. This flipped
the pause stats test from xfail to fail. Because CI considered xfail as
pass it now flags the test as failing. This shouldn't happen. Also we
currently report pause and FEC tests as passing on virtio which doesn't
make sense.
====================
Link: https://patch.msgid.link/20250620161109.2146242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XFAIL is considered a form of a pass by our CI. For HW devices returning
XFAIL for unsupported features is counter-productive because our CI
knows not to expect any HW test to pass until it sees 10 passes in a row.
If we return xfail the test shows up as pass even if the device doesn't
support the feature. netdevsim supports all features necessary for
the stats test so there is no concern about running the test in SW mode.
Make the test skip rather than xfail if driver doesn't support FEC or pause.
Link: https://patch.msgid.link/20250620161109.2146242-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Small adjustments to make pylint happy.
One warning about unused argument remains because the test uses
global variables rather than attaching netlink sockets to cfg.
Fixing this would be too much of a change for a linter fix commit
like this one.
Link: https://patch.msgid.link/20250620161109.2146242-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: lockless sk_sndtimeo and sk_rcvtimeo
This series completes the task of making sk->sk_sndtimeo and
sk->sk_rcvtimeo lockless.
====================
Link: https://patch.msgid.link/20250620155536.335520-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Followup of commit 285975dd67 ("net: annotate data-races around
sk->sk_{rcv|snd}timeo").
Remove lock_sock()/release_sock() from ksmbd_tcp_rcv_timeout()
and add READ_ONCE()/WRITE_ONCE() where it is needed.
Also SO_RCVTIMEO_OLD and SO_RCVTIMEO_NEW can call sock_set_timeout()
without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250620155536.335520-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Followup of commit 285975dd67 ("net: annotate data-races around
sk->sk_{rcv|snd}timeo").
Remove lock_sock()/release_sock() from sock_set_sndtimeo(),
and add READ_ONCE()/WRITE_ONCE() where it is needed.
Also SO_SNDTIMEO_OLD and SO_SNDTIMEO_NEW can call sock_set_timeout()
without holding the socket lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250620155536.335520-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: replace sock_i_uid() with sk_uid()
First patch annotates sk->sk_uid accesses and adds sk_uid() helper.
Second patch removes sock_i_uid() in favor of the new helper.
====================
Link: https://patch.msgid.link/20250620133001.4090592-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Difference between sock_i_uid() and sk_uid() is that
after sock_orphan(), sock_i_uid() returns GLOBAL_ROOT_UID
while sk_uid() returns the last cached sk->sk_uid value.
None of sock_i_uid() callers care about this.
Use sk_uid() which is much faster and inlined.
Note that diag/dump users are calling sock_i_ino() and
can not see the full benefit yet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_uid can be read while another thread changes its
value in sockfs_setattr().
Add sk_uid(const struct sock *sk) helper to factorize the needed
READ_ONCE() annotations, and add corresponding WRITE_ONCE()
where needed.
Fixes: 86741ec254 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://patch.msgid.link/20250620133001.4090592-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldpxybq9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/87msadybqf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6utybqk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87plf9ybqp.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/87qzzpybqu.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sek5ybr0.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt4lybr6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current Kconfig menu at [ALSA for SoC audio support] has no rules.
So, some venders are using menu style, some venders are listed each drivers
on top page, etc. It is difficult to find target vender and/or drivers
because it is very random.
Let's standardize ASoC menu
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7p1ybrb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
