Use vcpu_data.pi_desc_addr instead of amd_iommu_pi_data.base to get the
GA root pointer. KVM is the only source of amd_iommu_pi_data.base, and
KVM's one and only path for writing amd_iommu_pi_data.base computes the
exact same value for vcpu_data.pi_desc_addr and amd_iommu_pi_data.base,
and fills amd_iommu_pi_data.base if and only if vcpu_data.pi_desc_addr is
valid, i.e. amd_iommu_pi_data.base is fully redundant.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Sairaj Kodilkar <sarunkod@amd.com>
Link: https://lore.kernel.org/r/20250611224604.313496-23-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
With a rootfs built using libbpf's BPF CI [1], we can run specific tests
as follows:
$ ../libbpf-ci/rootfs/mkrootfs_debian.sh --arch ppc64el --distro noble
$ PLATFORM=ppc64el CROSS_COMPILE=powerpc64le-linux-gnu- \
tools/testing/selftests/bpf/vmtest.sh \
-l libbpf-vmtest-rootfs-*-noble-ppc64el.tar.zst \
-- ./test_progs -t verifier_array_access
Does not include a DENYLIST or support for KVM for now.
[1] https://github.com/libbpf/ci
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Link: https://lore.kernel.org/r/20250619140854.2135283-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The function update_prog_stats() will be called in the bpf trampoline.
In most cases, it will be optimized by the compiler by making it inline.
However, we can't rely on the compiler all the time, and just make it
__always_inline to reduce the possible overhead.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Link: https://lore.kernel.org/r/20250621045501.101187-1-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
or aren't considered necessary for -stable kernels. Only 4 are for MM.
- The 3 patch series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's recent
min_heap changes due to a performance regression. A fix for this
regression has been developed but we felt it best to go back to the
known-good version to give the new code more bake time.
- A lot of MAINTAINERS maintenance. I like to get these changes
upstreamed promptly because they can't break things and more
accurate/complete MAINTAINERS info hopefully improves the speed and
accuracy of our responses to submitters and reporters.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaFizWwAKCRDdBJ7gKXxA
jhivAQDGQXgzgzPCu/5/fTQjjq+D/8M2QjGxNy4o1itKoK+fYAEAzQGTL/8ay9FY
yhcipreU4A3lrxf94iOidiBCYkZaOgk=
=kFFb
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 7 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels. Only 4 are
for MM.
- The series `Revert "bcache: update min_heap_callbacks to use
default builtin swap"' from Kuan-Wei Chiu backs out the author's
recent min_heap changes due to a performance regression.
A fix for this regression has been developed but we felt it best to
go back to the known-good version to give the new code more bake
time.
- A lot of MAINTAINERS maintenance.
I like to get these changes upstreamed promptly because they can't
break things and more accurate/complete MAINTAINERS info hopefully
improves the speed and accuracy of our responses to submitters and
reporters"
* tag 'mm-hotfixes-stable-2025-06-22-18-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add additional mmap-related files to mmap section
MAINTAINERS: add memfd, shmem quota files to shmem section
MAINTAINERS: add stray rmap file to mm rmap section
MAINTAINERS: add hugetlb_cgroup.c to hugetlb section
MAINTAINERS: add further init files to mm init block
MAINTAINERS: update maintainers for HugeTLB
maple_tree: fix MA_STATE_PREALLOC flag in mas_preallocate()
MAINTAINERS: add missing test files to mm gup section
MAINTAINERS: add missing mm/workingset.c file to mm reclaim section
selftests/mm: skip uprobe vma merge test if uprobes are not enabled
bcache: remove unnecessary select MIN_HEAP
Revert "bcache: remove heap-related macros and switch to generic min_heap"
Revert "bcache: update min_heap_callbacks to use default builtin swap"
selftests/mm: add configs to fix testcase failure
kho: initialize tail pages for higher order folios properly
MAINTAINERS: add linux-mm@ list to Kexec Handover
mm: userfaultfd: fix race of userfaultfd_move and swap cache
mm/gup: revert "mm: gup: fix infinite loop within __get_longterm_locked"
selftests/mm: increase timeout from 180 to 900 seconds
mm/shmem, swap: fix softlockup with mTHP swapin
In some cases, the sysclk won't be configured on init, and sysclk can be
changed in hw_params() according to different sample rate, for example,
for 44kHz sample rate, the sysclk is 11.2896MHz, for 48kHz sample rate,
the sysclk is 12.288MHz.
In order to support the above case, only enable constraints when sysclk
is configured, and check the rate in hw_params.
So overall there are three cases that need to be considered:
- call set_sysclk() on init, then constraints will be initialized.
- don't call set_sysclk() on init, but call it after startup(), then
constraints will be configured, the constraints can be cleared with
call set_sysclk() again in shutdown().
- don't call set_sysclk() in the whole flow, then there are no any
constraints. The clocks depend on cpu dai.
Enlarge the WM8524_NUM_RATES to 12, as the supported rate range is 8kHz
to 192kHz.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250620021403.624303-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Turing+ register address space spans over that range, so increase it
as future patches will access more registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-10-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Some registers (notably scratch registers) don't have a definitive
purpose, but need to be interpreted differently depending on context.
Expand the register!() macro to support a syntax indicating that a
register type should be at the same offset as another one, but under a
different name, and with different fields and documentation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-9-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Although we want to access registers using the provided methods, it is
sometimes needed to use their raw offset, for instance when working with
a register array.
Expose the offset of each register using a type constant to avoid
resorting to hardcoded values.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-8-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This macro is pretty complex, and most rules are just helper, so add a
delimiter to indicate when users only interested in using it can stop
reading.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-7-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Fix the paths that were not absolute to prevent a potential local module
from being picked up.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-6-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
nova-core will need to use SZ_1M, so make the remaining constants
available.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-5-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
We will use this error in the nova-core driver.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-4-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaFlvFQAKCRBFlHeO1qrK
LpXYAP4xXaXFU8lp7mk77ipsXudywidktEINLwnkkpu9ktFM9gD/aXmgnWN5hFvX
6AYX6v+UTbymqqpIW9uylTteAfQ98ws=
=bO4B
-----END PGP SIGNATURE-----
Merge tag 'topic/dma-features-2025-06-23' of https://github.com/Rust-for-Linux/linux.git
DMA features for v6.17
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
Suppress posted interrupt notifications (set PID.SN=1) whenever the vCPU
is put, i.e. unloaded, not just when the vCPU is preempted, as KVM doesn't
do anything in response to a notification IRQ that arrives in the host,
nor does KVM rely on the Outstanding Notification (PID.ON) flag when the
vCPU is unloaded. And, the cost of scanning the PIR to manually set PID.ON
when loading the vCPU is quite small, especially relative to the cost of
loading (and unloading) a vCPU.
On the flip side, leaving SN clear means a notification for the vCPU will
result in a spurious IRQ for the pCPU, even if vCPU task is scheduled out,
running in userspace, etc. Even worse, if the pCPU is running a different
vCPU, the spurious IRQ could trigger posted interrupt processing for the
wrong vCPU, which is technically a violation of the architecture, as
setting bits in PIR aren't supposed to be propagated to the vIRR until a
notification IRQ is received.
The saving grace of the current behavior is that hardware sends
notification interrupts if and only if PID.ON=0, i.e. only the first
posted interrupt for a vCPU will trigger a spurious IRQ (for each window
where the vCPU is unloaded).
Ideally, KVM would suppress notifications before enabling IRQs in the
VM-Exit, but KVM relies on PID.ON as an indicator that there is a posted
interrupt pending in PIR, e.g. in vmx_sync_pir_to_irr(), and sadly there
is no way to ask hardware to set PID.ON, but not generate an interrupt.
That could be solved by using pi_has_pending_interrupt() instead of
checking only PID.ON, but it's not at all clear that would be a performance
win, as KVM would end up scanning the entire PIR whenever an interrupt
isn't pending.
And long term, the spurious IRQ window, i.e. where a vCPU is loaded with
IRQs enabled, can effectively be made smaller for hot paths by moving
performance critical VM-Exit handlers into the fastpath, i.e. by never
enabling IRQs for hot path VM-Exits.
Link: https://lore.kernel.org/r/20250611224604.313496-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disable IPI virtualization on AMD Family 17h CPUs (Zen2 and Zen1), as
hardware doesn't reliably detect changes to the 'IsRunning' bit during ICR
write emulation, and might fail to VM-Exit on the sending vCPU, if
IsRunning was recently cleared.
The absence of the VM-Exit leads to KVM not waking (or triggering nested
VM-Exit of) the target vCPU(s) of the IPI, which can lead to hung vCPUs,
unbounded delays in L2 execution, etc.
To workaround the erratum, simply disable IPI virtualization, which
prevents KVM from setting IsRunning and thus eliminates the race where
hardware sees a stale IsRunning=1. As a result, all ICR writes (except
when "Self" shorthand is used) will VM-Exit and therefore be correctly
emulated by KVM.
Disabling IPI virtualization does carry a performance penalty, but
benchmarkng shows that enabling AVIC without IPI virtualization is still
much better than not using AVIC at all, because AVIC still accelerates
posted interrupts and the receiving end of the IPIs.
Note, when virtualizing Self-IPIs, the CPU skips reading the physical ID
table and updates the vIRR directly (because the vCPU is by definition
actively running), i.e. Self-IPI isn't susceptible to the erratum *and*
is still accelerated by hardware.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
[sean: rebase, massage changelog, disallow user override]
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/20250611224604.313496-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaFlvFQAKCRBFlHeO1qrK
LpXYAP4xXaXFU8lp7mk77ipsXudywidktEINLwnkkpu9ktFM9gD/aXmgnWN5hFvX
6AYX6v+UTbymqqpIW9uylTteAfQ98ws=
=bO4B
-----END PGP SIGNATURE-----
Merge tag 'topic/dma-features-2025-06-23' into alloc-next
DMA features for v6.17
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
Max Kellerman recently experienced a problem[1] when calling exec with
differing uid and euid's and he triggered the logic that is supposed
to only handle setuid executables.
When exec isn't changing anything in struct cred it doesn't make sense
to go into the code that is there to handle the case when the
credentials change.
When looking into the history of the code I discovered that this issue
was not present in Linux-2.4.0-test12 and was introduced in
Linux-2.4.0-prerelease when the logic for handling this case was moved
from prepare_binprm to compute_creds in fs/exec.c.
The bug introdused was to comparing euid in the new credentials with
uid instead of euid in the old credentials, when testing if setuid
had changed the euid.
Since triggering the keep ptrace limping along case for setuid
executables makes no sense when it was not a setuid exec revert back
to the logic present in Linux-2.4.0-test12.
This removes the confusingly named and subtlety incorrect helpers
is_setuid and is_setgid, that helped this bug to persist.
The varaiable is_setid is renamed to id_changed (it's Linux-2.4.0-test12)
as the old name describes what matters rather than it's cause.
The code removed in Linux-2.4.0-prerelease was:
- /* Set-uid? */
- if (mode & S_ISUID) {
- bprm->e_uid = inode->i_uid;
- if (bprm->e_uid != current->euid)
- id_change = 1;
- }
-
- /* Set-gid? */
- /*
- * If setgid is set but no group execute bit then this
- * is a candidate for mandatory locking, not a setgid
- * executable.
- */
- if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
- bprm->e_gid = inode->i_gid;
- if (!in_group_p(bprm->e_gid))
- id_change = 1;
Linux-2.4.0-prerelease added the current logic as:
+ if (bprm->e_uid != current->uid || bprm->e_gid != current->gid ||
+ !cap_issubset(new_permitted, current->cap_permitted)) {
+ current->dumpable = 0;
+
+ lock_kernel();
+ if (must_not_trace_exec(current)
+ || atomic_read(¤t->fs->count) > 1
+ || atomic_read(¤t->files->count) > 1
+ || atomic_read(¤t->sig->count) > 1) {
+ if(!capable(CAP_SETUID)) {
+ bprm->e_uid = current->uid;
+ bprm->e_gid = current->gid;
+ }
+ if(!capable(CAP_SETPCAP)) {
+ new_permitted = cap_intersect(new_permitted,
+ current->cap_permitted);
+ }
+ }
+ do_unlock = 1;
+ }
I have condenced the logic from Linux-2.4.0-test12 to just:
id_changed = !uid_eq(new->euid, old->euid) || !in_group_p(new->egid);
This change is userspace visible, but I don't expect anyone to care.
For the bug that is being fixed to trigger bprm->unsafe has to be set.
The variable bprm->unsafe is set when ptracing an executable, when
sharing a working directory, or when no_new_privs is set. Properly
testing for cases that are safe even in those conditions and doing
nothing special should not affect anyone. Especially if they were
previously ok with their credentials getting munged
To minimize behavioural changes the code continues to set secureexec
when euid != uid or when egid != gid.
[1] https://lkml.kernel.org/r/20250306082615.174777-1-max.kellermann@ionos.com
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Fixes: 64444d3d0d7f ("Linux version 2.4.0-prerelease")
v1: https://lkml.kernel.org/r/878qmxsuy8.fsf@email.froward.int.ebiederm.org
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <kees@kernel.org>
We used to call directly hda_jackpoll_work() from a couple of places
for updating the jack and notify to user-space, but this makes rather
the code flow fragile. Namely, because of those direct calls,
hda_jackpoll_work() uses snd_hda_power_up_pm() and *_down_pm() calls
instead of the standard snd_hda_power_up() and *_down() calls. The
latter pair assures the runtime PM resume sync, so it can avoid the
race against the PM callbacks gracefully, while the former pair may
continue if called concurrently, hence it may race (by design).
In this patch, we change the call pattern of hda_jackpoll_work(); now
all callers are replaced with the standard snd_hda_jack_report_sync()
and the additional schedule_delayed_work().
Since hda_jackpoll_work() is called only from the associated work,
it's always outside the PM code path, and we can safely use
snd_hda_power_up() and *_down() there instead. This allows us to
remove the racy check of power-state in hda_jackpoll_work(), as well
as the tricky cancel_delayed_work() and rescheduling at
hda_codec_runtime_suspend().
Reported-by: Joakim Zhang <joakim.zhang@cixtech.com>
Closes: https://lore.kernel.org/20250619020844.2974160-1-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-4-tiwai@suse.de
When the jack polling is triggered quite frequently, it makes little
sense to perform the runtime PM at each time; since we do almost full
configuration at each runtime resume for HD-audio, the merit by power
saving would be lost. Hence, it'd be more reasonable to disable the
runtime PM when the jack polling is enabled.
This patch introduces the runtime PM idle callback and disables the
runtime PM when the jack polling is enabled. This also serves as the
preliminary change for the further jack poll cleanup.
The exception is the case where codec->bus->jackpoll_in_suspend flag
is set by the driver (currently set by HD-audio Tegra driver). This
flag indicates that the polling is infrequent, hence there is still
benefit to perform the runtime PM. The idle callback checks this flag
and allows the runtime PM when set.
Link: https://lore.kernel.org/20250619020844.2974160-1-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-3-tiwai@suse.de
Although the jack polling is canceled at shutdown in
snd_hda_codec_shutdown(), it might be still re-triggered when the work
is being processed at cancel_delayed_work_sync() call. This may
result in the unexpected hardware access that should have been already
disabled.
For assuring to stop the jack polling, clear codec->jackpoll_interval
at shutdown.
Reported-by: Joakim Zhang <joakim.zhang@cixtech.com>
Closes: https://lore.kernel.org/20250619020844.2974160-4-joakim.zhang@cixtech.com
Tested-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250623131437.10670-2-tiwai@suse.de
ASUS UM5606* models use the quirk to set up the bass speakers, but it
missed the mic-mute LED configuration. Other similar models have the
AMD ACP dmic, and the mic-mute is set up for that, but those models
don't have AMD ACP but rather built-in mics of Realtek codec, hence
the Realtek driver should set it up, instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220125
Link: https://patch.msgid.link/20250623151841.28810-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sometimes one may want to obtain a DMA handle starting at a given
offset. This can be done by adding said offset to the result of
`dma_handle()`, but doing so on the client side carries the risk that
the operation will go outside the bounds of the allocation.
Thus, add a `dma_handle_with_offset` method that adds the desired offset
after checking that it is still valid.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-3-ecf41ef99252@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
These properties are very useful to have (and to be used by nova-core)
and should be accessible, hence add them.
Additionally, add type invariants for the size of an allocation.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250619-nova-frts-v6-2-ecf41ef99252@nvidia.com
[ Slightly extend the commit message. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP EliteBook 6 G1a laptops use ALC236 codec and need the fixup
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF to make the mic/micmute LEDs
work.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250623063023.374920-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier.
Fixes: 880265c77a ("pNFS: Avoid a live lock condition in pnfs_update_layout()")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
There was a silly bug in the initial implementation where a loop
variable was not incremented. This commit increments the loop variable.
This bug is somewhat tricky to catch because it can only happen on loops
of two or more. If it is hit, it locks up a kernel thread in an infinite
loop.
Signed-off-by: Nikhil Jha <njha@janestreet.com>
Tested-by: Nikhil Jha <njha@janestreet.com>
Fixes: 08d6ee6d8a ("sunrpc: implement rfc2203 rpcsec_gss seqnum cache")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Add a new socket command which returns tx time stamps to the user. It
provide an alternative to the existing error queue recvmsg interface.
The command works in a polled multishot mode, which means io_uring will
poll the socket and keep posting timestamps until the request is
cancelled or fails in any other way (e.g. with no space in the CQ). It
reuses the net infra and grabs timestamps from the socket's error queue.
The command requires IORING_SETUP_CQE32. All non-final CQEs (marked with
IORING_CQE_F_MORE) have cqe->res set to the tskey, and the upper 16 bits
of cqe->flags keep tstype (i.e. offset by IORING_CQE_BUFFER_SHIFT). The
timevalue is store in the upper part of the extended CQE. The final
completion won't have IORING_CQE_F_MORE and will have cqe->res storing
0/error.
Suggested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/92ee66e6b33b8de062a977843d825f58f21ecd37.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper for posting 32 byte CQEs in a multishot mode and add a cmd
helper on top. As it specifically works with requests, the helper ignore
the passed in cqe->user_data and sets it to the one stored in the
request.
The command helper is only valid with multishot requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c29d7720c16e1f981cfaa903df187138baa3946b.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some commands like timestamping in the next patch can make use of
multishot polling, i.e. REQ_F_APOLL_MULTISHOT. Add support for that,
which is condensed in a single helper called io_cmd_poll_multishot().
The user who wants to continue with a request in a multishot mode must
call the function, and only if it returns 0 the user is free to proceed.
Apart from normal terminal errors, it can also end up with -EIOCBQUEUED,
in which case the user must forward it to the core io_uring. It's
forbidden to use task work while the request is executing in a multishot
mode.
The API is not foolproof, hence it's not exported to modules nor exposed
in public headers.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bcf97c31659662c72b69fc8fcdf2a88cfc16e430.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to allowing commands to do file polling, add a helper
that takes the desired poll event mask and arms it for polling. We won't
be able to use io_arm_poll_handler() with IORING_OP_URING_CMD as it
tries to infer the mask from the opcode data, and we can't unify it
across all commands.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7ee5633f2dc45fd15243f1a60965f7e30e1c48e8.1750065793.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reported use-after-free in vhci_flush() without repro. [0]
From the splat, a thread close()d a vhci file descriptor while
its device was being used by iotcl() on another thread.
Once the last fd refcnt is released, vhci_release() calls
hci_unregister_dev(), hci_free_dev(), and kfree() for struct
vhci_data, which is set to hci_dev->dev->driver_data.
The problem is that there is no synchronisation after unlinking
hdev from hci_dev_list in hci_unregister_dev(). There might be
another thread still accessing the hdev which was fetched before
the unlink operation.
We can use SRCU for such synchronisation.
Let's run hci_dev_reset() under SRCU and wait for its completion
in hci_unregister_dev().
Another option would be to restore hci_dev->destruct(), which was
removed in commit 587ae086f6 ("Bluetooth: Remove unused
hci-destruct cb"). However, this would not be a good solution, as
we should not run hci_unregister_dev() while there are in-flight
ioctl() requests, which could lead to another data-race KCSAN splat.
Note that other drivers seem to have the same problem, for exmaple,
virtbt_remove().
[0]:
BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718
CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xd2/0x2b0 mm/kasan/report.c:521
kasan_report+0x118/0x150 mm/kasan/report.c:634
skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline]
skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937
skb_queue_purge include/linux/skbuff.h:3368 [inline]
vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69
hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline]
hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592
sock_do_ioctl+0xd9/0x300 net/socket.c:1190
sock_ioctl+0x576/0x790 net/socket.c:1311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcf5b98e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929
RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009
RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528
</TASK>
Allocated by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
kasan_kmalloc include/linux/kasan.h:260 [inline]
__kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359
kmalloc_noprof include/linux/slab.h:905 [inline]
kzalloc_noprof include/linux/slab.h:1039 [inline]
vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635
misc_open+0x2bc/0x330 drivers/char/misc.c:161
chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414
do_dentry_open+0xdf0/0x1970 fs/open.c:964
vfs_open+0x3b/0x340 fs/open.c:1094
do_open fs/namei.c:3887 [inline]
path_openat+0x2ee5/0x3830 fs/namei.c:4046
do_filp_open+0x1fa/0x410 fs/namei.c:4073
do_sys_openat2+0x121/0x1c0 fs/open.c:1437
do_sys_open fs/open.c:1452 [inline]
__do_sys_openat fs/open.c:1468 [inline]
__se_sys_openat fs/open.c:1463 [inline]
__x64_sys_openat+0x138/0x170 fs/open.c:1463
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6535:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:576
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x62/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:233 [inline]
slab_free_hook mm/slub.c:2381 [inline]
slab_free mm/slub.c:4643 [inline]
kfree+0x18e/0x440 mm/slub.c:4842
vhci_release+0xbc/0xd0 drivers/bluetooth/hci_vhci.c:671
__fput+0x44c/0xa70 fs/file_table.c:465
task_work_run+0x1d1/0x260 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x6ad/0x22e0 kernel/exit.c:955
do_group_exit+0x21c/0x2d0 kernel/exit.c:1104
__do_sys_exit_group kernel/exit.c:1115 [inline]
__se_sys_exit_group kernel/exit.c:1113 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1113
x64_sys_call+0x21ba/0x21c0 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff88807cb8d800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 88 bytes inside of
freed 1024-byte region [ffff88807cb8d800, ffff88807cb8dc00)
Fixes: bf18c7118c ("Bluetooth: vhci: Free driver_data on file release")
Reported-by: syzbot+2faa4825e556199361f9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f62d64848fc4c7c30cd6
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To test and profile the overhead of io_uring task_work and the various
types of it, add IORING_NOP_TW which tells nop to signal completions
through task_work rather than complete them inline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
uring_cmd currently copies the full SQE at prep time, just in case it
needs it to be stable. However, for inline completions or requests that
get queued up on the device side, there's no need to ever copy the SQE.
This is particularly important, as various use cases of uring_cmd will
be using 128b sized SQEs.
Opt in to using ->sqe_copy() to let the core of io_uring decide when to
copy SQEs. This callback will only be called if it is safe to do so.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Will be called by the core of io_uring, if inline issue is not going
to be tried for a request. Opcodes can define this handler to defer
copying of SQE data that should remain stable.
Only called if IO_URING_F_INLINE is set. If it isn't set, then there's a
bug in the core handling of this, and -EFAULT will be returned instead
to terminate the request. This will trigger a WARN_ON_ONCE(). Don't
expect this to ever trigger, and down the line this can be removed.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set when the execution of the request is done inline from the system
call itself. Any deferred issue will never have this flag set.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add the missing error handling in case node name allocation ever fails.
Fixes: 2f95b9d5cf ("interconnect: Add generic interconnect driver for Exynos SoCs")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250623142437.23068-1-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Like ftruncate and write, fallocate operations on the same file cannot
be executed in parallel, so it is better to make fallocate be hashed
work.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Link: https://lore.kernel.org/r/20250623110218.61490-1-changfengnan@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On TGL/derivatives the pipe DMC state is lost when PG1 is disabled,
and the main DMC does not restore any of it. This means the state will
also be lost during PSR+DC5/6. It seems safest to not even enable the
pipe DMC in that case (the main DMC does restore the pipe DMC enable
bit in PIPEDMC_CONTROL_A for some reason).
Since pipe DMC is only needed for "fast LACE" on these platforms we aren't
actually losing anything here. In the future if we do want to enable
"fast LACE" we'll just have to remember that it won't be compatible with
PSR.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-10-ville.syrjala@linux.intel.com
Currently we have some asserts to make sure the main DMC has been
loaded. Add similar asserts for the pipe DMCs. And we might as well
just check all the mmio registers the firmware has asked us to
initialize. That also covers the hardcoded SSP/HTP registers we were
checking for the main DMC.
TODO: Maybe always configure DMC_EVT_CTL_ENABLE the way the firmware
has it set so that we wouldn't need to special case in the assert?
v2: Also assert in intel_dmc_load_program()
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-8-ville.syrjala@linux.intel.com
On ADL/MTL pipe DMC MMIO state evidently lives in PG0. The main DMC
saves/restores it for pipes A/B, but for pipes C/D we have to do it
in the driver.
On PTL the situation is mostly the same, except the main DMC firmware
doesn't seem to have the PG0 save/restore code anymore, and instead the
hardware (or maybe Punit?) seems to take care of this job now. Pipes
C/D still need a manual restore by the driver.
On LNL I've been unable to lose any pipe DMC state, despite the main
DMC firmware still implementing the PG0 save/restore for pipes A/B.
Not sure what's going on here.
On DG2 I've also not been able to lose the pipe DMC state. DG2
doesn't support DC6, so that might explain part of it. But even
DC9 doesn't make a difference here. Perhaps PG0 is just always on
for DG2?
BMG I've not tested at all. The main DMC firmware does appaer to
implement the PG0 pipe A/B save/restore logic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-7-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
On TGL/derivatives the entire pipe DMC state (program + MMIO) is
lost when PG1 is disabled, and the main DMC does not restore
any of it. Reload the state when enabling a pipe.
The other option would be to not load the pipe DMC at all since
it's only needed for "fast LACE" (which we don't use) on these
platforms. But let's keep it around just in case we ever decide
that "fast LACE" is something we want.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250617170759.19552-6-ville.syrjala@linux.intel.com
