The following splat was triggered when booting the kernel built with
arm64's defconfig + CRYPTO_SELFTESTS + DMA_API_DEBUG.
------------[ cut here ]------------
DMA-API: hisi_sec2 0000:75:00.0: cacheline tracking EEXIST, overlapping mappings aren't supported
WARNING: CPU: 24 PID: 1273 at kernel/dma/debug.c:596 add_dma_entry+0x248/0x308
Call trace:
add_dma_entry+0x248/0x308 (P)
debug_dma_map_sg+0x208/0x3e4
__dma_map_sg_attrs+0xbc/0x118
dma_map_sg_attrs+0x10/0x24
hisi_acc_sg_buf_map_to_hw_sgl+0x80/0x218 [hisi_qm]
sec_cipher_map+0xc4/0x338 [hisi_sec2]
sec_aead_sgl_map+0x18/0x24 [hisi_sec2]
sec_process+0xb8/0x36c [hisi_sec2]
sec_aead_crypto+0xe4/0x264 [hisi_sec2]
sec_aead_encrypt+0x14/0x20 [hisi_sec2]
crypto_aead_encrypt+0x24/0x38
test_aead_vec_cfg+0x480/0x7e4
test_aead_vec+0x84/0x1b8
alg_test_aead+0xc0/0x498
alg_test.part.0+0x518/0x524
alg_test+0x20/0x64
cryptomgr_test+0x24/0x44
kthread+0x130/0x1fc
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
DMA-API: Mapped at:
debug_dma_map_sg+0x234/0x3e4
__dma_map_sg_attrs+0xbc/0x118
dma_map_sg_attrs+0x10/0x24
hisi_acc_sg_buf_map_to_hw_sgl+0x80/0x218 [hisi_qm]
sec_cipher_map+0xc4/0x338 [hisi_sec2]
This occurs in selftests where the input and the output scatterlist point
to the same underlying memory (e.g., when tested with INPLACE_TWO_SGLISTS
mode).
The problem is that the hisi_sec2 driver maps these two different
scatterlists using the DMA_BIDIRECTIONAL flag which leads to overlapped
write mappings which are not supported by the DMA layer.
Fix it by using the fine grained and correct DMA mapping directions. While
at it, switch the DMA directions used by the hisi_zip driver too.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set .fips_allowed in the following drbg alg_test_desc structs.
drbg_nopr_hmac_sha384
drbg_nopr_sha384
drbg_pr_hmac_sha384
drbg_pr_sha384
The sha384 and hmac_sha384 DRBGs with and without prediction resistance
were disallowed in an early version of the FIPS 140-3 Implementation
Guidance document. Hence, the fips_allowed flag in struct alg_test_desc
pertaining to the affected DRBGs was unset. The IG has been withdrawn
and they are allowed again.
Furthermore, when the DRBGs are configured, /proc/crypto shows that
drbg_*pr_sha384 and drbg_*pr_hmac_sha384 are fips-approved ("fips: yes")
but because their self-tests are not run (a consequence of unsetting
the fips_allowed flag), the drbgs won't load successfully with the seeming
contradictory "fips: yes" in /proc/crypto.
This series contains a single patch that sets the fips_allowed flag in
the sha384-impacted DRBGs, which restores the ability to load them in
FIPS mode.
Link: https://lore.kernel.org/linux-crypto/979f4f6f-bb74-4b93-8cbf-6ed653604f0e@jvdsn.com/
Link: https://csrc.nist.gov/CSRC/media/Projects/cryptographic-module-validation-program/documents/fips%20140-3/FIPS%20140-3%20IG.pdf
To: Herbert Xu <herbert@gondor.apana.org.au>
To: David S. Miller <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jeff Barnes <jeffbarnes@linux.microsoft.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Support for asymmetric crypto services was not included in the qat_6xxx
by explicitly setting the asymmetric capabilities to 0 to allow for
additional testing.
Enable asymmetric crypto services on QAT GEN6 devices by setting the
appropriate capability flags.
Fixes: 17fd7514ae ("crypto: qat - add qat_6xxx driver")
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ICP_ACCEL_CAPABILITIES_CIPHER capability is masked out redundantly
for QAT GEN6 devices.
Remove it to avoid code duplication.
This does not introduce any functional change.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Panic notifiers are invoked with RCU read lock held and when the
SNP panic notifier tries to unregister itself from the panic
notifier callback itself it causes a deadlock as notifier
unregistration does RCU synchronization.
Code flow for SNP panic notifier:
snp_shutdown_on_panic() ->
__sev_firmware_shutdown() ->
__sev_snp_shutdown_locked() ->
atomic_notifier_chain_unregister(.., &snp_panic_notifier)
Fix SNP panic notifier to unregister itself during SNP shutdown
only if panic is not in progress.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Fixes: 19860c3274 ("crypto: ccp - Register SNP panic notifier only if SNP is enabled")
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the implementation to a native acomp interface using zstd
streaming APIs, eliminating the need for buffer linearization.
This includes:
- Removal of the scomp interface in favor of acomp
- Refactoring of stream allocation, initialization, and handling for
both compression and decompression using Zstandard streaming APIs
- Replacement of crypto_register_scomp() with crypto_register_acomp()
for module registration
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
virtcrypto_devmgr_get_first() and virtcrypto_dev_in_use() were added in
2016 by
commit dbaf0624ff ("crypto: add virtio-crypto driver")
but have remained unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most kernel applications utilizing the crypto API operate synchronously
and on small buffer sizes, therefore do not benefit from QAT acceleration.
Reduce the priority of QAT implementations for both skcipher and aead
algorithms, allowing more suitable alternatives to be selected by default.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Link: https://lore.kernel.org/all/20250613012357.GA3603104@google.com/
Cc: stable@vger.kernel.org
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ensure that drivers that have not been converted to the ahash API
do not use the ahash_request_set_virt fallback path as they cannot
use the software fallback.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9d7a0ab1c7 ("crypto: ahash - Handle partial blocks in API")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the TI OMAP DES binding to DT schema format.
Drop "ti,hwmods" as it is not actually used for this binding. Only
OMAP2 platforms are using it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the TI OMAP AES binding to DT schema format. It's a straight
forward conversion.
Make "ti,hwmods" not required as it is deprecated and only used on
OMAP2.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for hardware version of AES and SHA IPs
available on SAMA7D65 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DT bindings for SAMA7D65 SoC Atmel TDES.
The SAMA7D65 SoC has the same capability as the SAM9x75 SoC.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DT bindings for SAMA7D65 SoC Atmel SHA.
The SAMA7D65 similar to the SAM9x75 SoC supports SHA1/224/256/384/512
and supports HMAC for the same hashes. They both also support automatic
padding as well as double buffering.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add DT bindings for SAMA7D65 SoC in atmel AES.
The SAMA7D65 similar to the SAM9x75 SoC supports HMAC, dual buffer, and
GCM. And similar all 3 it supports CBC, CFB, CTR, ECB, and XTS.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
NXP SoCs like the iMX8QM, iMX8QXP or iMX8DXP use power domains for
resource management.
Add compatible strings for these SoCs (QXP and DXP gets to share as their
only difference is a core-count, Q=Quad core and D=Dual core), and allow
power-domains for them only. Keep the old restriction for others.
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The iMX8QXP (and variants such as the QX, DX, DXP) all identify as iMX8QXP.
They have the exact same restrictions as the supported iMX8QM introduced
at commit 61bb8db6f6 ("crypto: caam - Add support for i.MX8QM")
Loosen the check a little bit with a wildcard to also match the iMX8QXP
and its variants.
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since the CAAM on these SoCs is managed by another ARM core, called the
SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which
also reserves access to register page 0 suspend operations cannot touch
this page.
This is similar to when running OPTEE, where OPTEE will reserve page 0.
Track this situation using a new state variable no_page0, reflecting if
page 0 is reserved elsewhere, either by other management cores in SoC or
by OPTEE.
Replace the optee_en check in suspend/resume with the new check.
optee_en cannot go away as it's needed elsewhere to gate OPTEE specific
situations.
Fixes the following splat at suspend:
Internal error: synchronous external abort: 0000000096000010 [#1] SMP
Hardware name: Freescale i.MX8QXP ACU6C (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : readl+0x0/0x18
lr : rd_reg32+0x18/0x3c
sp : ffffffc08192ba20
x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000
x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090
x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010
x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5
x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c
x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001
x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000
x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002
x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000
x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004
Call trace:
readl+0x0/0x18
caam_ctrl_suspend+0x30/0xdc
dpm_run_callback.constprop.0+0x24/0x5c
device_suspend+0x170/0x2e8
dpm_suspend+0xa0/0x104
dpm_suspend_start+0x48/0x50
suspend_devices_and_enter+0x7c/0x45c
pm_suspend+0x148/0x160
state_store+0xb4/0xf8
kobj_attr_store+0x14/0x24
sysfs_kf_write+0x38/0x48
kernfs_fop_write_iter+0xb4/0x178
vfs_write+0x118/0x178
ksys_write+0x6c/0xd0
__arm64_sys_write+0x14/0x1c
invoke_syscall.constprop.0+0x64/0xb0
do_el0_svc+0x90/0xb0
el0_svc+0x18/0x44
el0t_64_sync_handler+0x88/0x124
el0t_64_sync+0x150/0x154
Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000)
Fixes: d2835701d9 ("crypto: caam - i.MX8ULP donot have CAAM page0 access")
Cc: stable@kernel.org # v6.10+
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I got some build warnings with W=1:
arch/x86/coco/sev/core.c:
arch/x86/crypto/aria_aesni_avx2_glue.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/aria_aesni_avx_glue.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/camellia_aesni_avx_glue.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/camellia_glue.c: warning:
EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/curve25519-x86_64.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/serpent_avx_glue.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/sm4_aesni_avx_glue.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/twofish_glue.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
arch/x86/crypto/twofish_glue_3way.c:
warning: EXPORT_SYMBOL() is used,
but #include <linux/export.h> is missing
so I fixed these build warnings for x86_64.
Signed-off-by: ChengZhenghan <chengzhenghan@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
I get a very rare -Wstringop-overread warning with gcc-15 for one function
in aesbs_ctr_encrypt():
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:212:1446: error: '__builtin_memcpy' offset [17, 2147483647] is out of the bounds [0, 16] of object 'buf' with type 'u8[16]' {aka 'unsigned char[16]'} [-Werror=array-bounds=]
212 | src = dst = memcpy(buf + sizeof(buf) - bytes,
arch/arm/crypto/aes-neonbs-glue.c: In function 'ctr_encrypt':
arch/arm/crypto/aes-neonbs-glue.c:218:17: error: 'aesbs_ctr_encrypt' reading 1 byte from a region of size 0 [-Werror=stringop-overread]
218 | aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 2 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 3 of type 'const u8[0]' {aka 'const unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:218:17: note: referencing argument 6 of type 'u8[0]' {aka 'unsigned char[]'}
arch/arm/crypto/aes-neonbs-glue.c:36:17: note: in a call to function 'aesbs_ctr_encrypt'
36 | asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
This could happen in theory if walk.nbytes is larger than INT_MAX and gets
converted to a negative local variable.
Keep the type unsigned like the orignal nbytes to be sure there is no
integer overflow.
Fixes: c8bf850e99 ("crypto: arm/aes-neonbs-ctr - deal with non-multiples of AES block size")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the Crypto API partial block handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The drm panel funcs should be static, fix it.
Fixes: 3fdd5bfbd6 ("drm/i915/panel: register drm_panel and call prepare/unprepare for ICL+ DSI")
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20250612124617.626958-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The drm_writeback_connector_cleanup have the signature:
static void drm_writeback_connector_cleanup(
struct drm_device *dev,
struct drm_writeback_connector *wb_connector)
But it is stored and used as a drmres_release_t
typedef void (*drmres_release_t)(struct drm_device *dev, void *res);
While the current code is valid and does not produce any warning, the
CFI runtime check (CONFIG_CFI_CLANG) can fail because the function
signature is not the same as drmres_release_t.
In order to fix this, change the function signature to match what is
expected by drmres_release_t.
Fixes: 1914ba2b91 ("drm: writeback: Create drmm variants for drm_writeback_connector initialization")
Suggested-by: Mark Yacoub <markyacoub@google.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250429-drm-fix-writeback-cleanup-v2-1-548ff3a4e284@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-10-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The lines on this chip are input-only. GPIO core can handle the missing
.set() callback so there's no need to implement a dummy here. Drop it.
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-5-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-4-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-3-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Daniel Sullivan <danieljsullivan7@gmail.com>
Link: https://lore.kernel.org/r/aFdKce3Go9iF4A6m@danv-Standard-PC-Q35-ICH9-2009
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When invoking device_create_with_groups(), its return value is stored
in `data->cdev_base`. However, in case of faiure, `data` is first freed
and then derefernced in order to return `data->cdev_base`.
Fix the use-after-free by extracting the error code before free'ing
`data`.
Fixes: fd19792851 ("gpio: sysfs: remove the mockdev pointer from struct gpio_device")
Addresses-Coverity-ID: 1644512 ("Memory - illegal accesses (USE_AFTER_FREE)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://lore.kernel.org/r/20250622220221.28025-1-antonio@mandelbit.com
[Bartosz: added Fixes: tag, tweaked commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The RSA functions moved by the below commit to 8250_rsa.c are used in
8250_base.c. Since that can be a module (when CONFIG_SERIAL_8250=m),
this causes build failures:
ERROR: modpost: "rsa_autoconfig" [drivers/tty/serial/8250/8250_base.ko] undefined!
ERROR: modpost: "rsa_reset" [drivers/tty/serial/8250/8250_base.ko] undefined!
ERROR: modpost: "rsa_disable" [drivers/tty/serial/8250/8250_base.ko] undefined!
ERROR: modpost: "rsa_enable" [drivers/tty/serial/8250/8250_base.ko] undefined!
Fix them by exporting the functions. But only to the base module using
EXPORT_SYMBOL_GPL_FOR_MODULES(). (And not to the whole world.)
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20250619165607.33403e19@canb.auug.org.au/
Fixes: 5a128fb475 ("serial: 8250: move RSA functions to 8250_rsa.c")
Link: https://lore.kernel.org/r/20250623061035.436414-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the driver-core fixes that are in 6.16-rc3 into here as well
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An earlier patch marked one of the two CPU masks as 'static' to reduce stack
usage, but if CONFIG_NR_CPUS is large enough, the function still produces
a warning for compile testing:
drivers/cpufreq/armada-8k-cpufreq.c: In function 'armada_8k_cpufreq_init':
drivers/cpufreq/armada-8k-cpufreq.c:203:1: error: the frame size of 1416 bytes is larger than 1408 bytes [-Werror=frame-larger-than=]
Normally this should be done using alloc_cpumask_var(), but since the
driver already has a static mask and the probe function is not called
concurrently, use the same trick for both.
Fixes: 1ffec650d0 ("cpufreq: armada-8k: Avoid excessive stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmhYZ9AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGPdcIAIR01BnZbU7knvkI
QSMlJR4zl8IDIu+9P35v5jmoklJFqYtIGQUnNTxrWK0i/NGj6+FAmA8xgAzeJZ7d
Kv0Qs0fkgwQWxFbbM9Xg9Vob8gxSZ6Qyo5ETz8UDupCNWyUPpMaRDLv8IRtF/19I
YAgXJqCXC4LuJJNROSkk3wiLqg+CerzJ/m7GJtBQdCmbv6h87HETaeQpKVgEwTkR
uEn99CDnOryovIYWoDaBbqLRF5AQr2JA6lqmQAr57wyjzuj1Ul2BNgLC/dlnuSQl
G8kv0+Kf+l1X3UJy1w8V4lkSLyjpTko7QIgv3AVDLDvOobCtZglWD4vPJ1OGvw4m
cHDrPg4=
=thw2
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc3' into perf-tools-next
To get the fixes in libbpf and perf tools.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250620075602.12575-1-fourier.thomas@gmail.com
If we always align the vmemmap start to PAGE_SIZE, there is a
chance that we may end up allocating page-sized vmemmap backing
pages in RAM in the altmap not present case, because a PAGE_SIZE
aligned address is not PMD_SIZE-aligned.
In this patch, we are aligning the vmemmap start address to
PMD_SIZE if altmap is not present. This ensures that a PMD_SIZE
page is always allocated for the vmemmap mapping if altmap is
not present.
If altmap is present, Make sure we align the start vmemmap addr to
PAGE_SIZE so that we calculate the correct start_pfn in altmap
boundary check to decide whether we should use altmap or RAM based
backing memory allocation. Also the address need to be aligned for
set_pte operation. If the start addr is already PMD_SIZE aligned
and with in the altmap boundary then we will try to use a pmd size
altmap mapping else we go for page size mapping.
So if altmap is present, we try to use the maximum number of
altmap pages; otherwise, we allocate a PMD_SIZE RAM page.
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/895c4afd912c85d344a2065e348fac90529ed48f.1750593372.git.donettom@linux.ibm.com
Error conditions are not handled properly if altmap is not present
and PMD_SIZE vmemmap_alloc_block_buf fails.
In this patch, if vmemmap_alloc_block_buf fails in the non-altmap
case, we will fall back to the base mapping.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/7f95fe91c827a2fb76367a58dbea724e811fb152.1750593372.git.donettom@linux.ibm.com
IO hotplug add event is handled in the user space with drmgr tool.
After the device is enabled, the user space uses /sys/kernel/dlpar
interface with “dt add index <drc_index>” to update the device tree.
The kernel interface (dlpar_hp_dt_add()) finds the parent node for
the specified ‘drc_index’ from ibm,drc-info property. The recent FW
provides this property from 2017 onwards. But KVM guest code in
some releases is still using the older SLOF firmware which has
ibm,drc-indexes property instead of ibm,drc-info.
If the ibm,drc-info is not available, this patch adds changes to
search ‘drc_index’ from the indexes array in ibm,drc-indexes
property to support old FW.
Fixes: 02b98ff44a ("powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add")
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250531235002.239213-1-haren@linux.ibm.com
The macro kvm_trace_symbol_exit is used for providing the mappings
for the trap vectors and their names. Add mapping for H_VIRT so that
trap reason is displayed as string instead of a vector number when using
the kvm_guest_exit tracepoint.
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250516121225.276466-1-gautam@linux.ibm.com
