Commit c7f005f70d ("rust: cpu: Add CpuId::current() to retrieve current
CPU ID") adds the file rust/helpers/cpu.c, and intends to add a file entry
for that file in the MAINTAINERS section CPU HOTPLUG. However, the added
file entry is rust/helper/cpu.c; note the subtle difference between the two
file names. Hence, ./scripts/get_maintainer.pl --self-test=patterns
complains about a broken reference.
Adjust the file entry to the intended file.
Fixes: c7f005f70d ("rust: cpu: Add CpuId::current() to retrieve current CPU ID")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFJfykDpUwtmpilE@jlahtine-mobl
After commit da5dd31efd ("gpio: vf610: Switch to gpio-mmio"),
the vf610 GPIO driver no longer uses the static number 32 for
gc->ngpio. This allows users to configure the number of GPIOs
per port.
And some gpio controllers did have less pads. So add 'ngpios' here,
this can save some memory when request bitmap, and also show user
more accurate information when use gpio tools.
Besides, some gpio controllers have hole in the gpio ranges, so use
'gpio-reserved-ranges' to cover that, then the gpioinfo tool show the
correct result.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
After commit da5dd31efd ("gpio: vf610: Switch to gpio-mmio"),
the vf610 GPIO driver no longer uses the static number 32 for
gc->ngpio. This allows users to configure the number of GPIOs
per port.
And some gpio controllers did have less pads. So add 'ngpios' here,
this can save some memory when request bitmap, and also show user
more accurate information when use gpio tools.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kory Maincent says:
====================
Add support for PSE budget evaluation strategy
This series brings support for budget evaluation strategy in the PSE
subsystem. PSE controllers can set priorities to decide which ports should
be turned off in case of special events like over-current.
This patch series adds support for two budget evaluation strategy.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
The UAPI allows adding support for software port priority mode managed from
userspace later if needed.
Patches 1-2: Add support for interrupt event report in PSE core, ethtool
and ethtool specs.
Patch 3: Adds support for interrupt and event report in TPS23881 driver.
Patches 4,5: Add support for PSE power domain in PSE core and ethtool.
Patches 6-8: Add support for budget evaluation strategy in PSE core,
ethtool and ethtool specs.
Patches 9-11: Add support for port priority and power supplies in PD692x0
drivers.
Patches 12,13: Add support for port priority in TPS23881 drivers.
====================
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-0-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an interrupt property to the device tree bindings for the TI TPS23881
PSE controller. The interrupt is primarily used to detect classification
and disconnection events, which are essential for managing the PSE
controller in compliance with the PoE standard.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-13-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enhances PSE callbacks by introducing support for the static
port priority feature. It extends interrupt management to handle and report
detection, classification, and disconnection events. Additionally, it
introduces the pi_get_pw_req() callback, which provides information about
the power requested by the Powered Devices.
Interrupt support is essential for the proper functioning of the TPS23881
controller. Without it, after a power-on (PWON), the controller will
no longer perform detection and classification. This could lead to
potential hazards, such as connecting a non-PoE device after a PoE device,
which might result in magic smoke.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-12-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds the regulator supply parameter of the managers.
Update also the example as the regulator supply of the PSE PIs
should be the managers itself and not an external regulator.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-11-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for managing the VDD and VDDA power supplies for the PD692x0
PSE controller, as well as the VAUX5 and VAUX3P3 power supplies for the
PD6920x PSE managers.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-10-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch extends the PSE callbacks by adding support for the newly
introduced pi_set_prio() callback, enabling the configuration of PSE PI
priorities. The current port priority is now also included in the status
information returned to users.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-9-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch expands the status information provided by ethtool for PSE c33
with current port priority and max port priority. It also adds a call to
pse_ethtool_set_prio() to configure the PSE port priority.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-8-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the ability to configure the PSE PI budget evaluation
strategies. Budget evaluation strategies is utilized by PSE controllers to
determine which ports to turn off first in scenarios such as power budget
exceedance.
The pis_prio_max value is used to define the maximum priority level
supported by the controller. Both the current priority and the maximum
priority are exposed to the user through the pse_ethtool_get_status call.
This patch add support for two mode of budget evaluation strategies.
1. Static Method:
This method involves distributing power based on PD classification.
It’s straightforward and stable, the PSE core keeping track of the
budget and subtracting the power requested by each PD’s class.
Advantages: Every PD gets its promised power at any time, which
guarantees reliability.
Disadvantages: PD classification steps are large, meaning devices
request much more power than they actually need. As a result, the power
supply may only operate at, say, 50% capacity, which is inefficient and
wastes money.
Priority max value is matching the number of PSE PIs within the PSE.
2. Dynamic Method:
To address the inefficiencies of the static method, vendors like
Microchip have introduced dynamic power budgeting, as seen in the
PD692x0 firmware. This method monitors the current consumption per port
and subtracts it from the available power budget. When the budget is
exceeded, lower-priority ports are shut down.
Advantages: This method optimizes resource utilization, saving costs.
Disadvantages: Low-priority devices may experience instability.
Priority max value is set by the PSE controller driver.
For now, budget evaluation methods are not configurable and cannot be
mixed. They are hardcoded in the PSE driver itself, as no current PSE
controller supports both methods.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-7-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor code by introducing a helper function to retrieve the hardware
enabled state of the PI, avoiding redundant implementations in the
future.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-6-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the index of the newly introduced PSE power domain to the user,
enabling improved management of the power budget for PSE devices.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-5-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce PSE power domain support as groundwork for upcoming port
priority features. Multiple PSE PIs can now be grouped under a single
PSE power domain, enabling future enhancements like defining available
power budgets, port priority modes, and disconnection policies. This
setup will allow the system to assess whether activating a port would
exceed the available power budget, preventing over-budget states
proactively.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-4-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for PSE event reporting through interrupts. Set up the newly
introduced devm_pse_irq_helper helper to register the interrupt. Events are
reported for over-current and over-temperature conditions.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-3-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for devm_pse_irq_helper() to register PSE interrupts and report
events such as over-current or over-temperature conditions. This follows a
similar approach to the regulator API but also sends notifications using a
dedicated PSE ethtool netlink socket.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-2-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for reporting PSE events via ethtool notifications,
introduce an attached_phydev field in the pse_control structure.
This field stores the phy_device associated with the PSE PI,
ensuring that notifications are sent to the correct network
interface.
The attached_phydev pointer is directly tied to the PHY lifecycle. It
is set when the PHY is registered and cleared when the PHY is removed.
There is no need to use a refcount, as doing so could interfere with
the PHY removal process.
Signed-off-by: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250617-feature_poe_port_prio-v14-1-78a1a645e2ee@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Arinzon says:
====================
PHC support in ENA driver
This patchset adds the support for PHC (PTP Hardware Clock)
in the ENA driver. The documentation part of the patchset
includes additional information, including statistics,
utilization and invocation examples through the testptp
utility.
====================
Link: https://patch.msgid.link/20250617110545.5659-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide the relevant information and guidelines
about the feature support in the ENA driver.
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-10-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an entry named `phc_stats` to view the PHC statistics.
If PHC is enabled, the stats are printed, as below:
phc_cnt: 0
phc_exp: 0
phc_skp: 0
phc_err_dv: 0
phc_err_ts: 0
If PHC is disabled, no statistics will be displayed.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-9-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the base directory of debugfs to the driver.
In order for the folder to be unique per driver instantiation,
the chosen name is the device name.
This commit contains the initialization and the
base folder.
The creation of the base folder may fail, but is considered
non-fatal.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-8-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the capability to set parameters through the devlink framework.
The parameter used for controlling PHC (enable/disable) details
are as follows:
- Name: enable_phc
- Type: Boolean (true - enable/false - disable)
- Mode: DEVLINK_PARAM_CMODE_DRIVERINIT
- Effect: Changes take place during driver initialization,
any changes require a devlink reload to take effect.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-7-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new device generic parameter to enable/disable the
PHC (PTP Hardware Clock) functionality in the device associated
with the devlink instance.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250617110545.5659-6-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the basic functionality to support devlink port
for devlink model completeness purposes.
Current support is for registration/un-registration.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-5-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding basic devlink capability support of reloading the driver.
This capability is required to support driver init type
devlink params (DEVLINK_PARAM_CMODE_DRIVERINIT). Such params
require reloading of the driver (destroy/restore sequence).
The reloading is done by the devlink framework using the
hooks provided by the driver.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-4-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each PHC device kernel registration receives a unique kernel index,
which is associated with a new PHC device file located at
"/dev/ptp<index>".
This device file serves as an interface for obtaining PHC timestamps.
Examples of tools that use "/dev/ptp" include testptp [1]
and chrony [2].
A reset flow may occur in the ENA driver while PHC is active.
During a reset, the driver will unregister and then re-register the
PHC device with the kernel.
Under race conditions, particularly during heavy PHC loads,
the driver’s reset flow might complete faster than the kernel’s PHC
unregister/register process.
This can result in the PHC index being different from what it was prior
to the reset, as the PHC index is selected using kernel ID
allocation [3].
While driver rmmod/insmod are done by the user, a reset may occur
at anytime, without the user awareness, consequently, the driver
might receive a new PHC index after the reset, potentially compromising
the user experience.
To prevent this issue, the PHC flow will detect the reset during PHC
destruction and will skip the PHC unregister/register calls to preserve
the kernel PHC index.
During the reset flow, any attempt to get a PHC timestamp will fail as
expected, but the kernel PHC index will remain unchanged.
[1]: https://github.com/torvalds/linux/blob/v6.1/tools/testing/selftests/ptp/testptp.c
[2]: https://github.com/mlichvar/chrony
[3]: https://www.kernel.org/doc/html/latest/core-api/idr.html
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-3-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ENA driver will be extended to support the new PHC feature using
ptp_clock interface [1]. this will provide timestamp reference for user
space to allow measuring time offset between the PHC and the system
clock in order to achieve nanosecond accuracy.
[1] - https://www.kernel.org/doc/html/latest/driver-api/ptp.html
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20250617110545.5659-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev says:
====================
udp_tunnel: remove rtnl_lock dependency
Recently bnxt had to grow back a bunch of rtnl dependencies because
of udp_tunnel's infra. Add separate (global) mutext to protect
udp_tunnel state.
====================
Link: https://patch.msgid.link/20250616162117.287806-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 325eb217e4.
udp_tunnel infra doesn't need RTNL, should be safe to get back
to only netdev instance lock.
Cc: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-7-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that there is only one path in udp_tunnel, there is no need to
have udp_ports_sleep knob. Remove it and adjust the test.
Cc: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-6-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing netdev_ops_assert_locked() already asserts that either
the RTNL lock or the per-device lock is held, making the explicit
ASSERT_RTNL() redundant.
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-5-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Drivers that are using ops lock and don't depend on RTNL lock
still need to manage it because udp_tunnel's RTNL dependency.
Introduce new udp_tunnel_nic_lock and use it instead of
rtnl_lock. Drop non-UDP_TUNNEL_NIC_INFO_MAY_SLEEP mode from
udp_tunnel infra (udp_tunnel_nic_device_sync_work needs to
grab udp_tunnel_nic_lock mutex and might sleep).
Cover more places in v4:
- netlink
- udp_tunnel_notify_add_rx_port (ndo_open)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_notify_del_rx_port (ndo_stop)
- triggers udp_tunnel_nic_device_sync_work
- udp_tunnel_get_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- udp_tunnel_drop_rx_info (__netdev_update_features)
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- udp_tunnel_nic_reset_ntf (ndo_open)
- notifiers
- udp_tunnel_nic_netdevice_event, depending on the event:
- triggers NETDEV_UDP_TUNNEL_PUSH_INFO
- triggers NETDEV_UDP_TUNNEL_DROP_INFO
- ethnl_tunnel_info_reply_size
- udp_tunnel_nic_set_port_priv (two intel drivers)
Cc: Michael Chan <michael.chan@broadcom.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-4-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We won't be able to sleep soon in vxlan_offload_rx_ports and won't be
able to grab sock_lock. Instead of having separate spinlock to
manage sockets, rely on rtnl lock. This is similar to how geneve
manages its sockets.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250616162117.287806-3-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_tunnel_push_rx_port will grab mutex in the next patch so
we can't use rcu. geneve_offload_rx_ports is called
from geneve_netdevice_event for NETDEV_UDP_TUNNEL_PUSH_INFO and
NETDEV_UDP_TUNNEL_DROP_INFO which both have ASSERT_RTNL.
Entries are added to and removed from the sock_list under rtnl
lock as well (when adding or removing a tunneling device).
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250616162117.287806-2-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the
map is full, due to percpu reservations and force shrink before
neighbor stealing. Once a CPU is unable to borrow from the global map,
it will once steal one elem from a neighbor and after that each time
flush this one element to the global list and immediately recycle it.
Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map
with 79 CPUs. CPU 79 will observe this behavior even while its
neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%).
CPUs need not be active concurrently. The issue can appear with
affinity migration, e.g., irqbalance. Each CPU can reserve and then
hold onto its 128 elements indefinitely.
Avoid global list exhaustion by limiting aggregate percpu caches to
half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count.
This change has no effect on sufficiently large tables.
Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable
lru->free_target. The extra field fits in a hole in struct bpf_lru.
The cacheline is already warm where read in the hot path. The field is
only accessed with the lru lock held.
Tested-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250618215803.3587312-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the Alphascale Clock Controller binding to DT schema format.
Add the undocumented 'clocks' property which is used in DTS. Drop the
clock defines and consumer examples from the old binding.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521004712.1793193-1-robh@kernel.org
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Marvell Armada 3xx Core Divider clock binding to DT schema
format.
Add the missing "marvell,armada-390-corediv-clock" compatible and
"clock-output-names" property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521211840.77487-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Marvell Armada 3700 peripheral clock binding to DT schema
format. The north bridge is also a "syscon", so add the compatible to
it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521211826.77098-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Marvell Dove PLL divider clock binding to DT schema format.
It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521210832.62177-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Marvell Armada 3700 TBG clock binding to DT schema format.
It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521210826.61957-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the Marvell Armada XP CPU clock binding to DT schema format.
It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521210806.61286-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the TI-NSPIRE clock bindings to DT schema format. It's a
straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250521210750.60759-1-robh@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
