Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch adds a new WQ_PERCPU flag to explicitly request the use of
the per-CPU behavior. Both flags coexist for one release cycle to allow
callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
tj: Merged doc patch.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users. Make it
clear by adding a system_percpu_wq.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Because OAM_SAG doesn't have an attached hwe, assign another hwe belonging
to the same gt (and different OAM unit) to OAM_SAG. A hwe is needed for
batch submissions to program OA HW.
v2: Assign an engine with a valid OA unit for OAM_SAG (Umesh)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250606192618.4133817-5-ashutosh.dixit@intel.com
Previously, the oa_unit associated with an OA stream was derived from hwe
associated with the stream (stream->hwe->oa_unit). This breaks with OAM_SAG
since OAM_SAG does not have any attached hardware engines. Resolve this by
introducing stream->oa_unit and stop depending on stream->hwe.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250606192618.4133817-4-ashutosh.dixit@intel.com
Fixes and New HW Support
- amd/hsmp: Timeout handling fixes
- amd/pmc:
- Clear metrics table at start of cycle
- Add PCSpecialist Lafite Pro V 14M to 8042 quirks list
- amd/pmf: Fix error handling corner cases (nth attempt)
- alienware-wmi-wmax: Revert G-Mode support as it lowers performance
- dell_rbu:
- Fix sparse lock context warning
- Fix list head usage
- Don't overwrite data buffer past the size of the last packet
- ideapad-laptop: Ensure EC is not polled too frequently
- intel-uncore-freq:
- Fail module load when plat_info is NULL
- Avoid a non-literal format string as it triggers a compiler warning
- intel/pmc: Add Lunar Lake and Panther Lake support to SSRAM Telemetry
- intel/power-domains: Fix error code in tpmi_init()
- samsung-galaxybook: Add support for Notebook 9 Pro and others (SAM0426)
The following is an automated shortlog grouped by driver:
amd/pmc:
- Add PCSpecialist Lafite Pro V 14M to 8042 quirks list
amd: pmc:
- Clear metrics table at start of cycle
amd: pmf:
- Prevent amd_pmf_tee_deinit() from running twice
- Simplify error flow in amd_pmf_init_smart_pc()
- Use device managed allocations
dell_rbu:
- Bump version
- Fix list usage
- Fix lock context warning
- Stop overwriting data buffer
ideapad-laptop:
- use usleep_range() for EC polling
intel/pmc:
- Add Lunar Lake support to Intel PMC SSRAM Telemetry
- Add Panther Lake support to Intel PMC SSRAM Telemetry
intel: power-domains:
- Fix error code in tpmi_init()
intel-uncore-freq:
- avoid non-literal format string
- Fail module load when plat_info is NULL
MAINTAINERS: .mailmap:
- Update Hans de Goede's email address
platform/x86: alienware-wmi-wmax:
- Revert: Add G-Mode support to Alienware m16 R1
samsung-galaxybook:
- Add SAM0426
x86/platform/amd:
- move final timeout check to after final sleep
- replace down_timeout() with down_interruptible()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaFFfqgAKCRBZrE9hU+XO
MV0gAQCpQ07IuIa20vuB+s5OCvxj2tCDfl3Sa72VfHGPqJQHBwEA92G7NkxvXSZT
Gmm0JXoHEPKKBcV73rFXUaOdjnNFigg=
=HtFe
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- amd/hsmp: Timeout handling fixes
- amd/pmc:
- Clear metrics table at start of cycle
- Add PCSpecialist Lafite Pro V 14M to 8042 quirks list
- amd/pmf: Fix error handling corner cases (nth attempt)
- alienware-wmi-wmax: Revert G-Mode support as it lowers performance
- dell_rbu:
- Fix sparse lock context warning
- Fix list head usage
- Don't overwrite data buffer past the size of the last packet
- ideapad-laptop: Ensure EC is not polled too frequently
- intel-uncore-freq:
- Fail module load when plat_info is NULL
- Avoid a non-literal format string as it triggers a compiler warning
- intel/pmc: Add Lunar Lake and Panther Lake support to SSRAM Telemetry
- intel/power-domains: Fix error code in tpmi_init()
- samsung-galaxybook: Add support for Notebook 9 Pro and others
(SAM0426)
* tag 'platform-drivers-x86-v6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
Revert "platform/x86: alienware-wmi-wmax: Add G-Mode support to Alienware m16 R1"
platform/x86/amd/pmc: Add PCSpecialist Lafite Pro V 14M to 8042 quirks list
platform/x86/intel-uncore-freq: avoid non-literal format string
platform/x86/intel/pmc: Add Panther Lake support to Intel PMC SSRAM Telemetry
platform/x86/intel/pmc: Add Lunar Lake support to Intel PMC SSRAM Telemetry
MAINTAINERS: .mailmap: Update Hans de Goede's email address
platform/x86: dell_rbu: Bump version
platform/x86: dell_rbu: Stop overwriting data buffer
platform/x86: dell_rbu: Fix list usage
platform/x86: dell_rbu: Fix lock context warning
platform/x86/amd: pmf: Simplify error flow in amd_pmf_init_smart_pc()
platform/x86/amd: pmf: Prevent amd_pmf_tee_deinit() from running twice
platform/x86/amd: pmf: Use device managed allocations
x86/platform/amd: replace down_timeout() with down_interruptible()
x86/platform/amd: move final timeout check to after final sleep
platform/x86/amd: pmc: Clear metrics table at start of cycle
platform/x86/intel: power-domains: Fix error code in tpmi_init()
platform/x86: samsung-galaxybook: Add SAM0426
platform/x86/intel-uncore-freq: Fail module load when plat_info is NULL
platform/x86: ideapad-laptop: use usleep_range() for EC polling
Print hwe to OA unit mapping to dmesg, to help debug for current and new
platforms.
v2: Separate out xe_oa_print_gt_oa_units() (Umesh)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250606192618.4133817-3-ashutosh.dixit@intel.com
On Xe2+ platforms, media engines are attached to "SCMI" OA media (OAM)
units. One or more SCMI OAM units might be present on a platform. In
addition there is another OAM unit for global events, called
OAM-SAG. Performance metrics for media workloads can be obtained from these
OAM units, similar to OAG.
Expose these OAM units for userspace to use. OAM-SAG is exposed as an OA
unit without any attached engines.
Bspec: 70819, 67103, 63844, 72572, 74476, 61284
v2: Fix xe_gt_WARN_ON in __hwe_oam_unit for < 12.7 platforms
v3: Return XE_OA_UNIT_INVALID for < 12.7 to indicate no OAM units
v4: Move xe_oa_print_oa_units() to separate patch
v5: Introduce DRM_XE_OA_UNIT_TYPE_OAM_SAG
v6: Introduce DRM_XE_OA_CAPS_OAM
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250606192618.4133817-2-ashutosh.dixit@intel.com
During task_group creation, sched_create_group() calls
scx_group_set_weight() with CGROUP_WEIGHT_DFL to initialize the sched_ext
portion. This is premature and ends up calling ops.cgroup_set_weight() with
an incorrect @cgrp before ops.cgroup_init() is called.
sched_create_group() should just initialize SCX related fields in the new
task_group. Fix it by factoring out scx_tg_init() from sched_init() and
making sched_create_group() call that function instead of
scx_group_set_weight().
v2: Retain CONFIG_EXT_GROUP_SCHED ifdef in sched_init() as removing it leads
to build failures on !CONFIG_GROUP_SCHED configs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8195136669 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Otherwise, tg->scx.weight can go out of sync while scx_cgroup is not enabled
and ops.cgroup_init() may be called with a stale weight value.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 8195136669 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
The test would be skipped because of nsdelegate, so the defined value is
not used (0 is always acceptable).
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use the missing mount of the unifier hierarchy as a hint of legacy
system and prepare our own named v1 hierarchy for tests.
The code is only in test_core.c and not cgroup_util.c because other
selftests are related to controllers which will be exposed on v2
hierarchy but named hierarchies are only v1 thing.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This comes useful when using selftests from mainline on older
kernels/setups that still rely on cgroup v1.
The core tests that rely on v2 specific features are skipped, the
remaining ones are adjusted to work with a v1 hierarchy.
The expected output on v1 system:
ok 1 # SKIP test_cgcore_internal_process_constraint
ok 2 # SKIP test_cgcore_top_down_constraint_enable
ok 3 # SKIP test_cgcore_top_down_constraint_disable
ok 4 # SKIP test_cgcore_no_internal_process_constraint_on_threads
ok 5 # SKIP test_cgcore_parent_becomes_threaded
ok 6 # SKIP test_cgcore_invalid_domain
ok 7 # SKIP test_cgcore_populated
ok 8 test_cgcore_proc_migration
ok 9 test_cgcore_thread_migration
ok 10 test_cgcore_destroy
ok 11 test_cgcore_lesser_euid_open
ok 12 # SKIP test_cgcore_lesser_ns_open
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Non-functional change, the control variable will be wired in a separate
commit.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
check_directory_structure runs after check_dirents, so it expects that
it won't see any inodes with missing backpointers - normally.
But online fsck can't run check_dirents yet, or the user might only be
running a specific pass, so we need to be careful that this isn't an
error. If an inode is unreachable, that's handled by a separate pass.
Also, add a new 'bch2_inode_has_backpointer()' helper, since we were
doing this inconsistently.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
With gcc14, when building with RELEASE=1, I hit four below compilation
failure:
Error 1:
In file included from test_loader.c:6:
test_loader.c: In function ‘run_subtest’: test_progs.h:194:17:
error: ‘retval’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
194 | fprintf(stdout, ##format); \
| ^~~~~~~
test_loader.c:958:13: note: ‘retval’ was declared here
958 | int retval, err, i;
| ^~~~~~
The uninitialized var 'retval' actually could cause incorrect result.
Error 2:
In function ‘test_fd_array_cnt’:
prog_tests/fd_array.c:71:14: error: ‘btf_id’ may be used uninitialized in this
function [-Werror=maybe-uninitialized]
71 | fd = bpf_btf_get_fd_by_id(id);
| ^~~~~~~~~~~~~~~~~~~~~~~~
prog_tests/fd_array.c:302:15: note: ‘btf_id’ was declared here
302 | __u32 btf_id;
| ^~~~~~
Changing ASSERT_GE to ASSERT_EQ can fix the compilation error. Otherwise,
there is no functionality change.
Error 3:
prog_tests/tailcalls.c: In function ‘test_tailcall_hierarchy_count’:
prog_tests/tailcalls.c:1402:23: error: ‘fentry_data_fd’ may be used uninitialized
in this function [-Werror=maybe-uninitialized]
1402 | err = bpf_map_lookup_elem(fentry_data_fd, &i, &val);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The code is correct. The change intends to silence gcc errors.
Error 4: (this error only happens on arm64)
In file included from prog_tests/log_buf.c:4:
prog_tests/log_buf.c: In function ‘bpf_prog_load_log_buf’:
./test_progs.h:390:22: error: ‘log_buf’ may be used uninitialized [-Werror=maybe-uninitialized]
390 | int ___err = libbpf_get_error(___res); \
| ^~~~~~~~~~~~~~~~~~~~~~~~
prog_tests/log_buf.c:158:14: note: in expansion of macro ‘ASSERT_OK_PTR’
158 | if (!ASSERT_OK_PTR(log_buf, "log_buf_alloc"))
| ^~~~~~~~~~~~~
In file included from selftests/bpf/tools/include/bpf/bpf.h:32,
from ./test_progs.h:36:
selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17:
note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
113 | LIBBPF_API long libbpf_get_error(const void *ptr);
| ^~~~~~~~~~~~~~~~
Adding a pragma to disable maybe-uninitialized fixed the issue.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250617044956.2686668-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The GID cache warning messages can flood the kernel log when there are
multiple failed attempts to add GIDs. This can happen when creating many
virtual interfaces without having enough space for their GIDs in the GID
table.
Change pr_warn to pr_warn_ratelimited to prevent log flooding while still
maintaining visibility of the issue.
Link: https://patch.msgid.link/r/fd45ed4a1078e743f498b234c3ae816610ba1b18.1750062357.git.leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On some systems with Nahum 11 and Nahum 13 the value of the XTAL clock in
the software STRAP is incorrect. This causes the PTP timer to run at the
wrong rate and can lead to synchronization issues.
The STRAP value is configured by the system firmware, and a firmware
update is not always possible. Since the XTAL clock on these systems
always runs at 38.4MHz, the driver may ignore the STRAP and just set
the correct value.
Fixes: cc23f4f0b6 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Reviewed-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch fixes an issue seen in a large-scale deployment under heavy
incoming pkts where the aRFS flow wrongly matches a flow and reprograms the
NIC with wrong settings. That mis-steering causes RX-path latency spikes
and noisy neighbor effects when many connections collide on the same
hash (some of our production servers have 20-30K connections).
set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by
hashing the skb sized by the per rx-queue table size. This results in
multiple connections (even across different rx-queues) getting the same
hash value. The driver steer function modifies the wrong flow to use this
rx-queue, e.g.: Flow#1 is first added:
Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10
Later when a new flow needs to be added:
Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20
The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This
results in both flows getting un-optimized - packets for Flow#1 goes to
q#20, and then reprogrammed back to q#10 later and so on; and Flow #2
programming is never done as Flow#1 is matched first for all misses. Many
flows may wrongly share the same hash and reprogram rules of the original
flow each with their own q#.
Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf
clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s
72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS,
enable aRFS (global value is 144 * rps_flow_cnt).
Test notes about results from ice_rx_flow_steer():
---------------------------------------------------
1. "Skip:" counter increments here:
if (fltr_info->q_index == rxq_idx ||
arfs_entry->fltr_state != ICE_ARFS_ACTIVE)
goto out;
2. "Add:" counter increments here:
ret = arfs_entry->fltr_info.fltr_id;
INIT_HLIST_NODE(&arfs_entry->list_entry);
3. "Update:" counter increments here:
/* update the queue to forward to on an already existing flow */
Runtime comparison: original code vs with the patch for different
rps_flow_cnt values.
+-------------------------------+--------------+--------------+
| rps_flow_cnt | 512 | 2048 |
+-------------------------------+--------------+--------------+
| Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K |
| Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K |
| CPU User | 216 vs 183 | 216 vs 206 |
| CPU System | 1441 vs 1171 | 1447 vs 1320 |
| CPU Softirq | 1245 vs 920 | 1238 vs 961 |
| CPU Total | 29 vs 22.7 | 29 vs 24.9 |
| aRFS Update | 533K vs 59 | 521K vs 32 |
| aRFS Skip | 82M vs 77M | 7.2M vs 4.5M |
+-------------------------------+--------------+--------------+
A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections
showed no performance degradation.
Some points on the patch/aRFS behavior:
1. Enabling full tuple matching ensures flows are always correctly matched,
even with smaller hash sizes.
2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs
and fewer calls to driver for programming on misses.
3. Larger hash tables reduces mis-steering due to more unique flow hashes,
but still has clashes. However, with larger per-device rps_flow_cnt, old
flows take more time to expire and new aRFS flows cannot be added if h/w
limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt
pkts have been processed by this cpu that are not part of the flow).
Fixes: 28bf26724f ("ice: Implement aRFS")
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The qib Infiniband device has long been decommissioned from distros and
unsupported by the company. We have kept it going in a compile only mode
for a while now and it's time to remove the driver. It has a number of
issues that are never going to be addressed and is a hindrance to
improving hfi1 and rdmavt.
Link: https://patch.msgid.link/r/174836076755.2436819.5981097575800950899.stgit@awdrv-04.cornelisnetworks.com
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Update the PCI Endpoint (EP) device tree binding documentation to
include PCIe Gen5 and Gen6 support for the `max-link-speed` property.
Similar to the Host Controller binding, the original EP binding
limited this value to 1~4 (Gen1~Gen4). With current SoCs requiring
Gen5/Gen6 support (e.g., Synopsys/Cadence IP), this change aligns
the EP binding with the kernel's PCIe 6.0 capabilities.
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250529021026.475861-3-18255117159@163.com
QCS8300 is derived from SA8775p. Hence, add the callback with SA8775p as
the fallback.
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250529035635.4162149-3-quic_ziyuzhan@quicinc.com
QCS615 is derived from SM8150. Hence, add the callback with SM8150 as the
fallback.
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
[mani: commit message rewording]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250527072036.3599076-3-quic_ziyuzhan@quicinc.com
Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().
See commit 7d95680d64 ("scripts/misc-check: check unnecessary #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Remove include <linux/export.h> from all files which do not contain an
EXPORT_SYMBOL().
See commit 7d95680d64 ("scripts/misc-check: check unnecessary #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Explicitly include <linux/export.h> in files which contain an
EXPORT_SYMBOL().
See commit a934a57a42 ("scripts/misc-check: check missing #include
<linux/export.h> when W=1") for more details.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The recent change which added READ_ONCE_NOCHECK() to read the nth entry
from the kernel stack incorrectly dropped dereferencing of the stack
pointer in order to read the requested entry.
In result the address of the entry is returned instead of its content.
Dereference the pointer again to fix this.
Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/r/20250612163331.GA13384@willie-the-truck
Fixes: d93a855c31 ("s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth()")
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Current DSB hardware is apparently a bit borked and likes to signal
spurious GOSUB errors. We already have most for the workarounds for
this in place, but the last part is simply not enabling the corresponding
interrupt.
While at it polish up the w/a comments with the w/a number,
and consistently take the short blurp from the w/a page.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-7-ville.syrjala@linux.intel.com
When using the flip queue, due to the DMC vs. DSB register corruption
problem, we must not issue any register writes from the DSB after
unhalting the DMC. Currently we are doing just that by trying to
restore DSB_PMCTRL* back to a sane state from intel_dsb_finish().
Since the only place left that pokes at DSB_PMCTRL* is intel_dsb_chain()
we can just do DSB_PMCTRL_2/DSB_FORCE_DEWAKE reset in the same place.
The DSB_PMCTRL reset is trickier since we'd have to do it from the
chained DSB itself. But based on my earlier testing
DSB_PMCTRL/DSB_ENABLE_DEWAKE doesn't actually do anything if the DSB
isn't actually enabled, so we can omit the reset to keep things a bit
simpler. We do need to reset DSB_PMCTRL/DSB_ENABLE_DEWAKE before
tarting the DSB however, in case it was left enabled from a previous
use.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-6-ville.syrjala@linux.intel.com
Since the introduction of DSB chaining we no longer need the
DEwake tricks in intel_dsb_commit().
I also need to relocate the DSB_PMCTRL* writes out of
intel_dsb_finish() (due to the flip queue DMC vs. DSB register
corruption issues), and it'll be a bit more straightforward if
I don't have to worry about the non-chained DSB path anymore.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-5-ville.syrjala@linux.intel.com
Pull the magic 20 usec DSB execution deadline into
intel_dsb_arm_exec_time_us(), and also add its counterpart
for the non-arming register write section. For the non-arming
part we'll just throw in a random 80 usec for now so the total
is 100usec. The total exec time will be needed by the upcoming
flip queue code.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-4-ville.syrjala@linux.intel.com
If the free_post is not QW aligned we don't have to memset the
extra DW needed to make it so, as the only way that can happen
is via intel_dsb_reg_write_indexed() which already makes sure
the next DW is zeroed.
Not a big deal, but this is more consistent how all the other
stuff operates that puts instructions into the DSB buffer, and
we'll get a few more of those soon.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250612145018.8735-2-ville.syrjala@linux.intel.com
Fixes the power regulator retrieval in tcan4x5x_can_probe() by ensuring
the regulator pointer is not set to NULL in the successful return from
devm_regulator_get_optional().
Fixes: 3814ca3a10 ("can: tcan4x5x: tcan4x5x_can_probe(): turn on the power before parsing the config")
Signed-off-by: Brett Werling <brett.werling@garmin.com>
Link: https://patch.msgid.link/20250612191825.3646364-1-brett.werling@garmin.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
btree node scrub was sometimes failing to rewrite nodes with errors;
bch2_btree_node_rewrite() can return a transaction restart and we
weren't checking - the lockrestart_do() needs to wrap the entire
operation.
And there's a better helper it should've been using,
bch2_btree_node_rewrite_key(), which makes all this more convenient.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
LSM hooks such as security_path_mknod() and security_inode_rename() have
access to newly allocated negative dentry, which has NULL d_inode.
Therefore, it is necessary to do the NULL pointer check for d_inode.
Also add selftests that checks the verifier enforces the NULL pointer
check.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20250613052857.1992233-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The parallel scratch layout spans 2k and LRC_ENGINE_ID_PPHWSP_OFFSET
lands within than space. This happens to be ok as the offset lands in
reserved part of guc_sched_wq_desc, but for future safety move
LRC_ENGINE_ID_PPHWSP_OFFSET to the unused offset of 1024 below parallel
scratch layout.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://lore.kernel.org/r/20250612172850.4170428-1-matthew.brost@intel.com
Move the VERW clearing before the MONITOR so that VERW doesn't disarm it
and the machine never enters C1.
Original idea by Kim Phillips <kim.phillips@amd.com>.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
The argument should be the string "EXPORTED_FOR_KUNIT_TESTING", not a
bare identifier.
Link: https://lore.kernel.org/r/20250616211637.111358-1-briannorris@chromium.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To notify userspace about which task (if any) made the device get in a
wedge state, make use of drm_wedge_task_info parameter, filling it with
the task PID and name.
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250617124949.2151549-7-andrealmeid@igalia.com
Signed-off-by: André Almeida <andrealmeid@igalia.com>
