There were some driver API offloaded to firmware, and to recognize the
feature add a version tag for it.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-3-pkshih@realtek.com
Add Wi-Fi 7 MLO related multi-role (MR) chanctx descriptors and query
function. They are designed for other components, e.g. coex, which are
interested in the following info.
* whether a MLD exists and how many active link
* the number of AP mode and station mode respectively
* how many chanctx and the number of 2/5/6 GHz respectively
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250611035523.36432-2-pkshih@realtek.com
If scan happen during start_ap, the register which control TX might be
turned off during scan. Additionally, if set_channel occurs during scan
will backup this register and set to firmware after set_channel done.
When scan complete, firmware will also set TX by this register, causing
TX to be disabled and beacon can't be TX. Therefore, in assign/unassign_vif
call scan abort before set_channel to avoid scan racing with set_channel.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-13-pkshih@realtek.com
The auth retry only continue 40ms, but the GO might switch to STA role
50ms when MCC. Therefore, enlarge the TX retry count from 32 to 60 to
let GC TX time overlapping with GO timeslot.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-12-pkshih@realtek.com
When the beacon offset is less than minimum of auxiliary tob
(aux->duration - aux->limit.max_toa), the upper bound of the reference
toa might be negative and lower than the lower bound, which causes the
auxiliary result to exceed the NoA limit. Therefore, in this case, the
anchor pattern is used for calculation.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-11-pkshih@realtek.com
Clear NoA setting before MCC starts. Otherwise, nulldata will be
blocked to TX because firmware use the normal flow NoA to calculate
timing.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-10-pkshih@realtek.com
In original scan, the scan time only 45ms. The GO in MCC mode only
stay 50ms and switch to STA role 50ms, which might cause GC can't scan
GO. Therefore, enlarge scan time to 105ms to ensure GC have time
overlapping with GO.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-9-pkshih@realtek.com
Adjust TX nulldata early time to let nulldata have more contention time
to TX. Otherwise, AP is hard to receive nulldata 1, which causes the
throughput test failed due to packet drops.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-8-pkshih@realtek.com
HW scan leak to TX nulldata 0 to AP after scan completed, which allowed
AP start to TX packet to us. Therefore, driver TX nulldata 0 after scan
completed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-7-pkshih@realtek.com
Stop TX during the MCC configuration period to prevent packet leakage.
The stop time is defined as 'start_tsf - tsf', which means the duration
from when MCC configuration begins until MCC starts.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-6-pkshih@realtek.com
MCC needs to wait at most 300ms to start. Additionally, if
scanning happens before MCC starts, it will miss some beacons,
which might cause beacon loss. Therefore, we reset beacon
filter when MCC start to let hardware reset beacon loss counter.
Additionally, GO is forbid to enter courtesy mode might cause
STA beacon loss. Therefore, disable beacon filter when GO+STA.
However, In WiFi 7 chip, even when GC+STA enable courtesy mode, the
beacon might loss because switching to courtesy timeslot will disable
TX/RX. If the TOB(time offset behind) or TOA(time offset ahead) is
too close to the edge of timeslot, the beacon might not be received.
Therefore, disable beacon filter when GC+STA in WiFi 7 chip.
Because disabling the beacon filter might prevent disconnection
when the AP power-off without sending a deauth. Therefore, driver
TX QOS nulldata periodically to detect the AP status, and the
connection is terminated if no ACK is received for 6 seconds.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-5-pkshih@realtek.com
The frequency get from PPDU status set as center channel during MCC,
but we need to report to mac80211 as primary channel. Therefore, we
use the chanctx information in software to instead it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-4-pkshih@realtek.com
The RF notify MCC H2C command format of 8852C different from other
chip, therefore add v0 format to update it.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-3-pkshih@realtek.com
HW scan flow has considered the timing when to get back op for the scanning
interface. But, when concurrency, there are two interfaces with connection.
The OP channel of another one was not back originally. It then easily lead
to connection loss when scanning during concurrency. So, HW scan flow is
extended to deal with second OP channel. And, H2C command is also extended
to fill second MAC ID.
The changes mentioned above are done for WiFi 6 chips first. HW scan has
different handling architectures including FW and driver on WiFi 7 chips.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610130034.14692-2-pkshih@realtek.com
i915_pmu.c may fail to build with GCOV and AutoFDO enabled.
../drivers/gpu/drm/i915/i915_pmu.c:116:3: error: call to '__compiletime_assert_487' declared with 'error' attribute: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
116 | BUILD_BUG_ON(bit >
| ^
Here is a way to reproduce the issue:
$ git checkout v6.15
$ mkdir build
$ ./scripts/kconfig/merge_config.sh -O build -n -m <(cat <<EOF
CONFIG_DRM=y
CONFIG_PCI=y
CONFIG_DRM_I915=y
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_AUTOFDO_CLANG=y
EOF
)
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
olddefconfig
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
CLANG_AUTOFDO_PROFILE=...PATH_TO_SOME_AFDO_PROFILE... \
drivers/gpu/drm/i915/i915_pmu.o
Although not super sure what happened, by reviewing the code, it should
depend on `__builtin_constant_p(bit)` directly instead of assuming
`__builtin_constant_p(config)` makes `bit` a builtin constant.
Also fix a nit, to reuse the `bit` local variable.
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250612083023.562585-1-tzungbi@kernel.org
(cherry picked from commit 686d773186)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When `dma_mapping_error()` is true, if a new `skb` has been allocated,
then it must be de-allocated.
Compile tested only
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250613074014.69856-2-fourier.thomas@gmail.com
txpower_info_{2g,5g} are too big to fit on the stack, but in most of the
rtlwifi variants this stays below the warning limit for stack frames.
In rtl8192ee and a few others, I see a case where clang decides to fully
inline this into rtl92ee_read_eeprom_info, triggering this warning:
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/hw.c:2178:6: error: stack frame size (1312) exceeds limit (1280) in 'rtl92ee_read_eeprom_info' [-Werror,-Wframe-larger-than]
Mark _rtl92ee_read_txpower_info_from_hwpg() as noinline_for_stack to
and mark _rtl92ee_get_chnl_group() as __always_inline to make clang
behave the same way as gcc. Inlining _rtl92ee_get_chnl_group helps
let the compiler see that the index is always in range. The same
change appears to be necessary in all rtlwifi variants.
A more thorough approach would be to avoid the use of the two structures
on the stack entirely and combine them with the struct rtl_efuse
data that is dynamically allocated and holds the same information.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250610092240.2639751-1-arnd@kernel.org
Fix the case where we're deleting in a different snapshot and need to
emit a whiteout - that requires a regular BTREE_ITER_filter_snapshots
iterator.
Also, only delete the part of the extent that extents past i_size.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When the inode was a whiteout, we were inserting a new whiteout at the
wrong (old) snapshot.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for journal rewind, where the seq we're replaying from may be
different than the last journal entry's last_seq.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, we weren't checking the result of the skiplist walk, just
the is_ancestor bitmap.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We need to start searching from search_key - _not_ path->pos, which will
point to the key we found in the btree
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
this code is rarely invoked, so - we had a few bugs left from basing it
off of bch2_journal_keys_peek_max()...
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Just like the EBUG_ON in bch2_journal_add_entry().
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now the alloc_req is allocated from the bump allocator, if there is
reallocation, the memory of alloc_req would be frees, fix by delaying the
reallocation to transaction restart, it has to restart anyway.
Reported-by: syzbot+2887a13a5c387e616a68@syzkaller.appspotmail.com
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Allocating new memory when mempool is exhausted is too complicated, just
return ENOMEM is fine. memcpy is not needed, since there might be
pointers point to the old memory, that's the bug.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We've been seeing some livelock-ish behavior in the index update part of
the main write path, and while we've got low level btree path
tracepoints, we've been lacking high level btree iterator tracepoints.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
After commit 6f110a5e4f ("Disable SLUB_TINY for build testing"), which
causes CONFIG_KASAN to be enabled in allmodconfig again, arm64
allmodconfig builds with clang-17 and older show an instance of
-Wframe-larger-than (which breaks the build with CONFIG_WERROR=y):
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (2336) exceeds limit (2048) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
When KASAN is disabled, the stack usage is roughly quartered:
lib/crypto/curve25519-hacl64.c:757:6: error: stack frame size (608) exceeds limit (128) in 'curve25519_generic' [-Werror,-Wframe-larger-than]
757 | void curve25519_generic(u8 mypublic[CURVE25519_KEY_SIZE],
| ^
Using '-Rpass-analysis=stack-frame-layout' shows the following variables
and many, many 8-byte spills when KASAN is enabled:
Offset: [SP-144], Type: Variable, Align: 8, Size: 40
Offset: [SP-464], Type: Variable, Align: 8, Size: 320
Offset: [SP-784], Type: Variable, Align: 8, Size: 320
Offset: [SP-864], Type: Variable, Align: 32, Size: 80
Offset: [SP-896], Type: Variable, Align: 32, Size: 32
Offset: [SP-1016], Type: Variable, Align: 8, Size: 120
When KASAN is disabled, there are still spills but not at many and the
variables list is smaller:
Offset: [SP-192], Type: Variable, Align: 32, Size: 80
Offset: [SP-224], Type: Variable, Align: 32, Size: 32
Offset: [SP-344], Type: Variable, Align: 8, Size: 120
Disable KASAN for this file when using clang-17 or older to avoid
blowing out the stack, clearing up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250609-curve25519-hacl64-disable-kasan-clang-v1-1-08ea0ac5ccff@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Annotate various keys, ivs, and other byte arrays with __nonstring so
that static initializers will not complain about truncating the trailing
NUL byte under GCC 15 with -Wunterminated-string-initialization enabled.
Silences many warnings like:
../lib/crypto/aesgcm.c:642:27: warning: initializer-string for array of 'unsigned char' truncates NUL terminator but destination lacks 'nonstring' attribute (13 chars into 12 available) [-Wunterminated-string-initialization]
642 | .iv = "\xca\xfe\xba\xbe\xfa\xce\xdb\xad"
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250529173113.work.760-kees@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Use a more common format for the id table sentinel for consistency and
symmetry.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-8-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is already a loop index variable declared at function scope so
drop the unnecessary overloaded loop declarations.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The devm_of_phy_optional_get() takes an optional name argument as its
third parameter and not an index like the recently replaced
devm_of_phy_get_by_index().
Replace 0 with an explicit NULL for consistency and readability.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Clean up the error messages by using a consistent format with a colon
followed by a space and an errno (or unsupported frequency).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rename the clock error label which is now used to disable all clocks and
not just the ref clock on phy_init() errors.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make sure to disable the repeater PHY also on phy_init() failure.
Fixes: 3584f6392f ("phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater")
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Make sure to disable all clocks enabled at phy_init() also on
phy_exit().
Fixes: c4098f3e61 ("phy: phy-snps-eusb2: add support for exynos2200")
Cc: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250523084839.11015-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SM8750 utilizes an eUSB2 PHY from M31. Add the initialization
sequences to bring it out of reset and into an operational state. This
differs to the M31 USB driver, in that the M31 eUSB2 driver will
require a connection to an eUSB2 repeater. This PHY driver will handle
the initialization of the associated eUSB2 repeater when required.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-6-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The eUSB2 repeater that exists in the QCOM PMICs are utilized for several
different eUSB2 PHY vendors, such as M31 or Synopsys. Hence, the wording
needs to be updated to remove associations to a specific vendor.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-5-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new register offsets and PHY values for SM8750. Some of the previous
definitions can be leveraged from older PHY versions as offsets within
registers have not changed. This also adds the required PHY sequence that
is recommended after running hardware characterization.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-4-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On SM8750, the M31 eUSB2 PHY is being used to support USB2. Add the
binding definition for the PHY driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-2-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add an entry to the compatible field for SM8750 for the QMP combo PHY.
This handles the USB3 path for SM8750.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250527-sm8750_usb_master-v6-1-d58de3b41d34@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
-----BEGIN PGP SIGNATURE-----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=iO3g
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
