In MII mode, Tx lines are swapped for port0 and port1, which means
Tx port0 receives data from PRU1 and the Tx port1 receives data from
PRU0. This is an expected hardware behavior and reading the Tx stats
needs to be handled accordingly in the driver. Update the driver to
read Tx stats from the PRU1 for port0 and PRU0 for port1.
Fixes: c1e10d5dc7 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250603052904.431203-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The logic added in the blamed commit was supposed to only omit nat source
port allocation if neither the existing nor the new entry are subject to
NAT.
However, its not enough to lookup the conntrack based on the proposed
tuple, we must also check the reverse direction.
Otherwise there are esoteric cases where the collision is in the reverse
direction because that colliding connection has a port rewrite, but the
new entry doesn't. In this case, we only check the new entry and then
erronously conclude that no clash exists anymore.
The existing (udp) tuple is:
a:p -> b:P, with nat translation to s:P, i.e. pure daddr rewrite,
reverse tuple in conntrack table is s:P -> a:p.
When another UDP packet is sent directly to s, i.e. a:p->s:P, this is
correctly detected as a colliding entry: tuple is taken by existing reply
tuple in reverse direction.
But the colliding conntrack is only searched for with unreversed
direction, and we can't find such entry matching a:p->s:P.
The incorrect conclusion is that the clashing entry has timed out and
that no port address translation is required.
Such conntrack will then be discarded at nf_confirm time because the
proposed reverse direction clashes with an existing mapping in the
conntrack table.
Search for the reverse tuple too, this will then check the NAT bits of
the colliding entry and triggers port reallocation.
Followp patch extends nft_nat.sh selftest to cover this scenario.
The IPS_SEQ_ADJUST change is also a bug fix:
Instead of checking for SEQ_ADJ this tested for SEEN_REPLY and ASSURED
by accident -- _BIT is only for use with the test_bit() API.
This bug has little consequence in practice, because the sequence number
adjustments are only useful for TCP which doesn't support clash resolution.
The existing test case (conntrack_reverse_clash.sh) exercise a race
condition path (parallel conntrack creation on different CPUs), so
the colliding entries have neither SEEN_REPLY nor ASSURED set.
Thanks to Yafang Shao and Shaun Brady for an initial investigation
of this bug.
Fixes: d8f84a9bc7 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1795
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Reported-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit 0935ee6032 ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7a ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the first field doesn't cover the entire start map, then we must zero
out the remainder, else we leak those bits into the next match round map.
The early fix was incomplete and did only fix up the generic C
implementation.
A followup patch adds a test case to nft_concat_range.sh.
Fixes: 791a615b7a ("netfilter: nf_set_pipapo: fix initial map fill")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Daniele noticed that the fix in commit 2d2be279f1 ("drm/xe: fix UAF
around queue destruction") looks to have been unintentionally removed as
part of handling a conflict in some past merge commit. Add it back.
Fixes: ac44ff7cec ("Merge tag 'drm-xe-fixes-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250603174213.1543579-2-matthew.auld@intel.com
A bunch of fixes, including a big batch for the Intel AVS driver, and
one new device ID. It's all device specific.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhALmUACgkQJNaLcl1U
h9CQ3gf/eBmbd/G0CiooTGpornoFRj1GAT1SWr05cT8qEZ1v03mf57AEX8DTTW2o
SUpkIdYhiJByF5BPlxIB2PdljpweRUc3uwfequeHu6WdVP2tgvB824IN1c6v5ymR
LMsFxGvfCZTz+S/hqlzmMCE0qm3pZrjsKccK8rmCePBGbjWvWYntYOy3h+EoQWPi
+EFnUw2sU80e8VX5UJFrMP9YHEv2/xr6QGkYRT+SsEyPWs/DyfVjdMo/SBVH6VAC
jLNour0FlPcvLN9m/yWdv1n7rq1Q3sOQ/Cl0ORMggmDs6r8Csaea9D+RIUK4+dFv
qLK7/Wepkjw3R5dnfnW4b6ZfSj1bKw==
=o11g
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A bunch of fixes, including a big batch for the Intel AVS driver, and
one new device ID. It's all device specific.
It's unclear why I originally wrote in the description of
`prepare_to_enable` that "This is not specified in a standard way on
eDP timing diagrams" and then also wrote "It is effectively the time
from HPD going high till you can turn on the backlight." It seems
pretty clear that it's (T4+T5+T6+T8)-min. Either I was confused when I
wrote this or I was looking at some strange panel datasheet that I can
no longer find.
Update the description of the field so it's easier for people to fill
this in. Couch the description with "usually" in case there really was
some weird datasheet where things were specified in a different way.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250521173204.1.Ic0375a9360698592f27afbf1f60f4996d504ed4f@changeid
The panel lacked the connector type which causes a warning. Adding the
connector type reveals wrong bus_flags and bits per pixel. Fix all of
it.
Fixes: 1319f2178b ("drm/panel-simple: add Evervision VGG644804 panel entry")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074110.655114-1-mwalle@kernel.org
Add support for the Huiling hl055fhav028c panel as used on the
Gameforce Ace handheld gaming console. This panel uses a Himax HX8399C
display controller and requires a sparsely documented vendor provided
init sequence. The display resolution is 1080x1920 and is 70mm by 127mm
as stated in the manufacturer's documentation.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250603193930.323607-2-macroalpha82@gmail.com
Add compatible string for the Huiling hl055fhav028c. This panel is
based on the Himax HX8399C display controller which is extremely
similar to the existing HX8394. Add a new constant for
himax,hx8399c for this new display controller as well.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250603193930.323607-3-macroalpha82@gmail.com
Shenzhen Huiling Information Technology Co. Ltd. specializes in the
research and manufacturing of display and touch screens for industrial
usage. https://en.szhuiling.com/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250603193930.323607-2-macroalpha82@gmail.com
Timings taken from the datasheet and the display is working in DE mode,
thus the datasheet only specifies the blanking period. sync, back porch
and front porch are arbitrarily chosen.
The datasheet can be found at [1] but for reference these are the
relevant timings:
sym | | min | typ | max | unit |
------|--------------+------+------+------+------+
Tv | V period | 1094 | 1130 | 1836 | Th |
| V active | 1080 | 1080 | 1080 | Th |
| V blanking | 14 | 50 | 756 | Th |
Fv | V frequency | 49 | 60 | 76 | Hz |
Th | H period | 1000 | 1050 | 1678 | Tclk |
| H active | 960 | 960 | 960 | Tclk |
| H blanking | 40 | 90 | 718 | Tclk |
Fh | H frequency | 53.7 | 67.8 | 90.0 | kHz |
Tclk | LVDS clock | 53.7 | 71.2 | 90.0 | MHz |
Keep in mind that this is a dual link LVDS panel and the horizontal
timings are only for one half of the panel.
[1] https://www.fortec-integrated.de/fileadmin/pdf/produkte/TFT-Displays/AUO/P238HAN01.0_Datasheet.pdf
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074439.655749-2-mwalle@kernel.org
struct device *dev from struct ili9341 is not used anywhere, remove it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250519133345.257138-1-andriy.shevchenko@linux.intel.com
Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will be
checked, thus one can now easily catch errors when e.g. using the
'?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel' crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>' if
'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant
'len <= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed in
the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer' to
delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a dependency
for memory backing feature of the Rust null block driver, which is
waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the Rust
subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the pointer
passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time check
of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of 'assert_pinned!'
(so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----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=JRqL
-----END PGP SIGNATURE-----
Merge tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- KUnit '#[test]'s:
- Support KUnit-mapped 'assert!' macros.
The support that landed last cycle was very basic, and the
'assert!' macros panicked since they were the standard library
ones. Now, they are mapped to the KUnit ones in a similar way to
how is done for doctests, reusing the infrastructure there.
With this, a failing test like:
#[test]
fn my_first_test() {
assert_eq!(42, 43);
}
will report:
# my_first_test: ASSERTION FAILED at rust/kernel/lib.rs:251
Expected 42 == 43 to be true, but is false
# my_first_test.speed: normal
not ok 1 my_first_test
- Support tests with checked 'Result' return types.
The return value of test functions that return a 'Result' will
be checked, thus one can now easily catch errors when e.g. using
the '?' operator in tests.
With this, a failing test like:
#[test]
fn my_test() -> Result {
f()?;
Ok(())
}
will report:
# my_test: ASSERTION FAILED at rust/kernel/lib.rs:321
Expected is_test_result_ok(my_test()) to be true, but is false
# my_test.speed: normal
not ok 1 my_test
- Add 'kunit_tests' to the prelude.
- Clarify the remaining language unstable features in use.
- Compile 'core' with edition 2024 for Rust >= 1.87.
- Workaround 'bindgen' issue with forward references to 'enum' types.
- objtool: relax slice condition to cover more 'noreturn' functions.
- Use absolute paths in macros referencing 'core' and 'kernel'
crates.
- Skip '-mno-fdpic' flag for bindgen in GCC 32-bit arm builds.
- Clean some 'doc_markdown' lint hits -- we may enable it later on.
'kernel' crate:
- 'alloc' module:
- 'Box': support for type coercion, e.g. 'Box<T>' to 'Box<dyn U>'
if 'T' implements 'U'.
- 'Vec': implement new methods (prerequisites for nova-core and
binder): 'truncate', 'resize', 'clear', 'pop',
'push_within_capacity' (with new error type 'PushError'),
'drain_all', 'retain', 'remove' (with new error type
'RemoveError'), insert_within_capacity' (with new error type
'InsertError').
In addition, simplify 'push' using 'spare_capacity_mut', split
'set_len' into 'inc_len' and 'dec_len', add type invariant 'len
<= capacity' and simplify 'truncate' using 'dec_len'.
- 'time' module:
- Morph the Rust hrtimer subsystem into the Rust timekeeping
subsystem, covering delay, sleep, timekeeping, timers. This new
subsystem has all the relevant timekeeping C maintainers listed
in the entry.
- Replace 'Ktime' with 'Delta' and 'Instant' types to represent a
duration of time and a point in time.
- Temporarily add 'Ktime' to 'hrtimer' module to allow 'hrtimer'
to delay converting to 'Instant' and 'Delta'.
- 'xarray' module:
- Add a Rust abstraction for the 'xarray' data structure. This
abstraction allows Rust code to leverage the 'xarray' to store
types that implement 'ForeignOwnable'. This support is a
dependency for memory backing feature of the Rust null block
driver, which is waiting to be merged.
- Set up an entry in 'MAINTAINERS' for the XArray Rust support.
Patches will go to the new Rust XArray tree and then via the
Rust subsystem tree for now.
- Allow 'ForeignOwnable' to carry information about the pointed-to
type. This helps asserting alignment requirements for the
pointer passed to the foreign language.
- 'container_of!': retain pointer mut-ness and add a compile-time
check of the type of the first parameter ('$field_ptr').
- Support optional message in 'static_assert!'.
- Add C FFI types (e.g. 'c_int') to the prelude.
- 'str' module: simplify KUnit tests 'format!' macro, convert
'rusttest' tests into KUnit, take advantage of the '-> Result'
support in KUnit '#[test]'s.
- 'list' module: add examples for 'List', fix path of
'assert_pinned!' (so far unused macro rule).
- 'workqueue' module: remove 'HasWork::OFFSET'.
- 'page' module: add 'inline' attribute.
'macros' crate:
- 'module' macro: place 'cleanup_module()' in '.exit.text' section.
'pin-init' crate:
- Add 'Wrapper<T>' trait for creating pin-initializers for wrapper
structs with a structurally pinned value such as 'UnsafeCell<T>' or
'MaybeUninit<T>'.
- Add 'MaybeZeroable' derive macro to try to derive 'Zeroable', but
not error if not all fields implement it. This is needed to derive
'Zeroable' for all bindgen-generated structs.
- Add 'unsafe fn cast_[pin_]init()' functions to unsafely change the
initialized type of an initializer. These are utilized by the
'Wrapper<T>' implementations.
- Add support for visibility in 'Zeroable' derive macro.
- Add support for 'union's in 'Zeroable' derive macro.
- Upstream dev news: streamline CI, fix some bugs. Add new workflows
to check if the user-space version and the one in the kernel tree
have diverged. Use the issues tab [1] to track them, which should
help folks report and diagnose issues w.r.t. 'pin-init' better.
[1] https://github.com/rust-for-linux/pin-init/issues
Documentation:
- Testing: add docs on the new KUnit '#[test]' tests.
- Coding guidelines: explain that '///' vs. '//' applies to private
items too. Add section on C FFI types.
- Quick Start guide: update Ubuntu instructions and split them into
"25.04" and "24.04 LTS and older".
And a few other cleanups and improvements"
* tag 'rust-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (78 commits)
rust: list: Fix typo `much` in arc.rs
rust: check type of `$ptr` in `container_of!`
rust: workqueue: remove HasWork::OFFSET
rust: retain pointer mut-ness in `container_of!`
Documentation: rust: testing: add docs on the new KUnit `#[test]` tests
Documentation: rust: rename `#[test]`s to "`rusttest` host tests"
rust: str: take advantage of the `-> Result` support in KUnit `#[test]`'s
rust: str: simplify KUnit tests `format!` macro
rust: str: convert `rusttest` tests into KUnit
rust: add `kunit_tests` to the prelude
rust: kunit: support checked `-> Result`s in KUnit `#[test]`s
rust: kunit: support KUnit-mapped `assert!` macros in `#[test]`s
rust: make section names plural
rust: list: fix path of `assert_pinned!`
rust: compile libcore with edition 2024 for 1.87+
rust: dma: add missing Markdown code span
rust: task: add missing Markdown code spans and intra-doc links
rust: pci: fix docs related to missing Markdown code spans
rust: alloc: add missing Markdown code span
rust: alloc: add missing Markdown code spans
...
-----BEGIN PGP SIGNATURE-----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=DKRi
-----END PGP SIGNATURE-----
Merge tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server updates from Steve French:
"Four smb3 server fixes:
- Fix for special character handling when mounting with "posix"
- Fix for mounts from Mac for fs that don't provide unique inode
numbers
- Two cleanup patches (e.g. for crypto calls)"
* tag '6.16-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: allow a filename to contain special characters on SMB3.1.1 posix extension
ksmbd: provide zero as a unique ID to the Mac client
ksmbd: remove unnecessary softdep on crc32
ksmbd: use SHA-256 library API instead of crypto_shash API
- More stack usage improvements (~600 bytes).
- Define CLASS()es for some commonly used types, and convert most
rcu_read_lock() uses to the new lock guards
- New introspection:
- Superblock error counters are now available in sysfs: previously,
they were only visible with 'show-super', which doesn't provide a
live view
- New tracepoint, error_throw(), which is called any time we return an
error and start to unwind
- Repair
- check_fix_ptrs() can now repair btree node roots
- We can now repair when we've somehow ended up with the journal using
a superblock bucket
- Revert some leftovers from the aborted directory i_size feature, and
add repair code: some userspace programs (e.g. sshfs) were getting
confused.
It seems in 6.15 there's a bug where i_nlink on the vfs inode has been
getting incorrectly set to 0, with some unfortunate results;
list_journal analysis showed bch2_inode_rm() being called (by
bch2_evict_inode()) when it clearly should not have been.
- bch2_inode_rm() now runs "should we be deleting this inode?" checks
that were previously only run when deleting unlinked inodes in
recovery.
- check_subvol() was treating a dangling subvol (pointing to a missing
root inode) like a dangling dirent, and deleting it. This was the
really unfortunate one: check_subvol() will now recreate the root
inode if necessary.
This took longer to debug than it should have, and we lost several
filesystems unnecessarily, becuase users have been ignoring the release
notes and blindly running 'fsck -y'. Debugging required reconstructing
what happened through analyzing the journal, when ideally someone would
have noticed 'hey, fsck is asking me if I want to repair this: it
usually doesn't, maybe I should run this in dry run mode and check
what's going on?'.
As a reminder, fsck errors are being marked as autofix once we've
verified, in real world usage, that they're working correctly; blindly
running 'fsck -y' on an experimental filesystem is playing with fire.
Up to this incident we've had an excellent track record of not losing
data, so let's try to learn from this one.
This is a community effort, I wouldn't be able to get this done without
the help of all the people QAing and providing excellent bug reports and
feedback based on real world usage. But please don't ignore advice and
expect me to pick up the pieces.
If an error isn't marked as autofix, and it /is/ happening in the wild,
that's also something I need to know about so we can check it out and
add it to the autofix list if repair looks good. I haven't been getting
those reports, and I should be; since we don't have any sort of
telemetry yet I am absolutely dependent on user reports.
Now I'll be spending the weekend working on new repair code to see if I
can get a filesystem back for a user who didn't have backups.
-----BEGIN PGP SIGNATURE-----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=ZGDn
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-06-04' of git://evilpiepirate.org/bcachefs
Pull more bcachefs updates from Kent Overstreet:
"More bcachefs updates:
- More stack usage improvements (~600 bytes)
- Define CLASS()es for some commonly used types, and convert most
rcu_read_lock() uses to the new lock guards
- New introspection:
- Superblock error counters are now available in sysfs:
previously, they were only visible with 'show-super', which
doesn't provide a live view
- New tracepoint, error_throw(), which is called any time we
return an error and start to unwind
- Repair
- check_fix_ptrs() can now repair btree node roots
- We can now repair when we've somehow ended up with the journal
using a superblock bucket
- Revert some leftovers from the aborted directory i_size feature,
and add repair code: some userspace programs (e.g. sshfs) were
getting confused
It seems in 6.15 there's a bug where i_nlink on the vfs inode has been
getting incorrectly set to 0, with some unfortunate results;
list_journal analysis showed bch2_inode_rm() being called (by
bch2_evict_inode()) when it clearly should not have been.
- bch2_inode_rm() now runs "should we be deleting this inode?" checks
that were previously only run when deleting unlinked inodes in
recovery
- check_subvol() was treating a dangling subvol (pointing to a
missing root inode) like a dangling dirent, and deleting it. This
was the really unfortunate one: check_subvol() will now recreate
the root inode if necessary
This took longer to debug than it should have, and we lost several
filesystems unnecessarily, because users have been ignoring the
release notes and blindly running 'fsck -y'. Debugging required
reconstructing what happened through analyzing the journal, when
ideally someone would have noticed 'hey, fsck is asking me if I want
to repair this: it usually doesn't, maybe I should run this in dry run
mode and check what's going on?'
As a reminder, fsck errors are being marked as autofix once we've
verified, in real world usage, that they're working correctly; blindly
running 'fsck -y' on an experimental filesystem is playing with fire
Up to this incident we've had an excellent track record of not losing
data, so let's try to learn from this one
This is a community effort, I wouldn't be able to get this done
without the help of all the people QAing and providing excellent bug
reports and feedback based on real world usage. But please don't
ignore advice and expect me to pick up the pieces
If an error isn't marked as autofix, and it /is/ happening in the
wild, that's also something I need to know about so we can check it
out and add it to the autofix list if repair looks good. I haven't
been getting those reports, and I should be; since we don't have any
sort of telemetry yet I am absolutely dependent on user reports
Now I'll be spending the weekend working on new repair code to see if
I can get a filesystem back for a user who didn't have backups"
* tag 'bcachefs-2025-06-04' of git://evilpiepirate.org/bcachefs: (69 commits)
bcachefs: add cond_resched() to handle_overwrites()
bcachefs: Make journal read log message a bit quieter
bcachefs: Fix subvol to missing root repair
bcachefs: Run may_delete_deleted_inode() checks in bch2_inode_rm()
bcachefs: delete dead code from may_delete_deleted_inode()
bcachefs: Add flags to subvolume_to_text()
bcachefs: Fix oops in btree_node_seq_matches()
bcachefs: Fix dirent_casefold_mismatch repair
bcachefs: Fix bch2_fsck_rename_dirent() for casefold
bcachefs: Redo bch2_dirent_init_name()
bcachefs: Fix -Wc23-extensions in bch2_check_dirents()
bcachefs: Run check_dirents second time if required
bcachefs: Run snapshot deletion out of system_long_wq
bcachefs: Make check_key_has_snapshot safer
bcachefs: BCH_RECOVERY_PASS_NO_RATELIMIT
bcachefs: bch2_require_recovery_pass()
bcachefs: bch_err_throw()
bcachefs: Repair code for directory i_size
bcachefs: Kill un-reverted directory i_size code
bcachefs: Delete redundant fsck_err()
...
Checking for the delegability of the misaligned access trap is needed
for the KVM FWFT extension implementation. Add a function to get the
delegability of the misaligned trap exception.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-11-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Split the code that check for the uniformity of misaligned accesses
performance on all cpus from check_unaligned_access_emulated_all_cpus()
to its own function which will be used for delegation check. No
functional changes intended.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-10-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
While misaligned_access_speed was defined in a file compile with
CONFIG_RISCV_MISALIGNED, its definition was under
CONFIG_RISCV_SCALAR_MISALIGNED. This resulted in compilation problems
when using it in a file compiled with CONFIG_RISCV_MISALIGNED.
Move the declaration under CONFIG_RISCV_MISALIGNED so that it can be
used unconditionnally when compiled with that config and remove the check
for that variable in traps_misaligned.c.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-9-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
schedule_on_each_cpu() was used without any good reason while documented
as very slow. This call was in the boot path, so better use
on_each_cpu() for scalar misaligned checking. Vector misaligned check
still needs to use schedule_on_each_cpu() since it requires irqs to be
enabled but that's less of a problem since this code is ran in a kthread.
Add a comment to explicit that.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-8-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Now that the kernel can handle misaligned accesses in S-mode, request
misaligned access exception delegation from SBI. This uses the FWFT SBI
extension defined in SBI version 3.0.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-7-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Add FWFT extension calls. This will be ratified in SBI V3.0 hence, it is
provided as a separate commit that can be left out if needed.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-6-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This SBI extensions enables supervisor mode to control feature that are
under M-mode control (For instance, Svadu menvcfg ADUE bit, Ssdbltrp
DTE, etc). Add an interface to set local features for a specific cpu
mask as well as for the online cpu mask.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-5-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
A few new errors have been added with SBI V3.0, maps them as close as
possible to errno values.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
A few parenthesis in check for SBI version/extension were useless,
remove them.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-3-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The Firmware Features extension (FWFT) was added as part of the SBI 3.0
specification. Add SBI definitions to use this extension.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250523101932.1594077-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
When you read this debugfs file it's isn't guaranteed the count
will happen before the scan, but I think the intent is that it does.
printf argument evaluation order is undefined.
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250603220901.1217161-1-airlied@gmail.com
In systemd we spotted an issue after switching to ioctl(PIDFD_GET_INFO)
for obtaining pid number the pidfd refers to, that for processes
with a parent from outer pidns PIDFD_GET_INFO unexpectedly yields
-ESRCH [1]. It turned out that there's an arbitrary check blocking
this, which is not really sensible given getppid() happily returns
0 for such processes. Just drop the spurious check and userspace
ought to handle ppid == 0 properly everywhere.
[1] https://github.com/systemd/systemd/issues/37715
Fixes: cdda1f26e7 ("pidfd: add ioctl to retrieve pid info")
Signed-off-by: Mike Yuan <me@yhndnzj.com>
Link: https://lore.kernel.org/20250604150238.42664-1-me@yhndnzj.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: Luca Boccassi <luca.boccassi@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Users seem to be assuming that the 'dropped unflushed entries' message
at the end of journal read indicates some sort of problem, when it does
not - we expect there to be entries in the journal that weren't
commited, it's purely informational so that we can correlate journal
sequence numbers elsewhere when debugging.
Shorten the log message a bit to hopefully make this clearer.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where the root inode of a subvolume was erronously deleted:
bch2_evict_inode() called bch2_inode_rm(), meaning the VFS inode's
i_nlink was somehow set to 0 when it shouldn't have - the inode in the
btree indicated it clearly was not unlinked.
This has been addressed with additional safety checks in
bch2_inode_rm() - pulling in the safety checks we already were doing
when deleting unlinked inodes in recovery - but the really disastrous
bug was in check_subvols(), which on finding a dangling subvol (subvol
with a missing root inode) would delete the subvolume.
I assume this bug dates from early check_directory_structure() code,
which originally handled subvolumes and normal paths - the idea being
that still live contents of the subvolume would get reattached
somewhere.
But that's incorrect, and disastrously so; deleting a subvolume triggers
deleting the snapshot ID it points to, deleting the entire contents.
The correct way to repair is to recreate the root inode if it's missing;
then any contents will get reattached under that subvolume's lost+found.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug where bch2_evict_inode() incorrectly called bch2_inode_rm()
- the journal clearly showed the inode was not unlinked.
We've got checks that we use in recovery when cleaning up deleted
inodes, lift them to bch2_inode_rm() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
btree_update_nodes_written() needs to wait on in-flight writes to old
nodes before marking them as freed. But it has no reason to pin those
old nodes in memory, so some trickyness ensues.
The update we're completing deleted references to those nodes from the
btree, so we know if they've been evicted they can't be pulled back in.
We just have to check if the nodes we have pointers to are still those
old nodes, and haven't been reused.
To do that we check the node's "sequence number" (actually a random 64
bit cookie), but that lives in the node's data buffer. 'struct btree'
can't be freed until filesystem shutdown (as they're quite small), but
the data buffers can be freed or swapped around.
Commit 1f88c35674, which was fixing a kmsan warning, assumed that we
could safely do this locklessly with just a READ_ONCE() - if we've got a
non-null ptr it would be safe to read from.
But that's not true if the data buffer is a vmalloc allocation, so we
need to restore the locking that commit deleted (or alternatively RCU
free those data buffers, but there's no other reason for that).
Fixes: 1f88c35674 ("bcachefs: Fix a KMSAN splat in btree_update_nodes_written()")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Instead of simply recreating a mis-casefolded dirent, use the str_hash
repair code, which will rename it if necessary - the dirent might have
been created again with the correct casefolding.
Factor out out bch2_str_hash_repair key() from
__bch2_str_hash_check_key() for the new path to use, and export
bch2_dirent_create_key() as well.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_fsck_renamed_dirent was creating bch_dirent keys open-coded - but
we need to use the appropriate helper, if the directory is casefolded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Redo (and simplify somewhat) how casefolded and non casefolded dirents
are initialized, and export this to be used by fsck_rename_dirent().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Clang warns (or errors with CONFIG_WERROR=y):
fs/bcachefs/fsck.c:2325:2: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
2325 | int ret = bch2_trans_run(c,
| ^
On clang-17 and older, this is an unconditional error:
fs/bcachefs/fsck.c:2325:2: error: expected expression
2325 | int ret = bch2_trans_run(c,
| ^
Move the declaration of ret to the top of the function to resolve both
ways this issue manifests.
Fixes: c72def5237 ("bcachefs: Run check_dirents second time if required")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
A new policy within qualcomm requires me to use a new email address
for all future contributions to Linux kernel. Update the mailmap to
map my old email addresses to the new one, ie akhilpo@oss.qualcomm.com
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/lkml/20250603121508.296678-1-quic_akhilpo@quicinc.com
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
My current email address will stop working soon. Use
linux.dev email instead.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/655555/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
I will no longer regularly work on this platform. Hence will
step down from maintainer duties.
Also, add Jessica as a reviewer to the MSM DRM subsystem to help
out with the reviews.
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/655558/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Two fixes in the built-in idle selection helpers.
- Fix prev_cpu handling to guarantee that idle selection never returns a CPU
that's not allowed.
- Skip cross-node search when !NUMA which could lead to infinite looping due
to a bug in NUMA iterator.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaECWBw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfV9AP4mk63TUsLdqwa6iqE0dZArOAhj8QXETsv1Q0+y
FGQKEQEAxPNJx3ifhzgXoQi1SOZkqeq44erbcy0x7owtb+QBVgs=
=G1uN
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
"Two fixes in the built-in idle selection helpers:
- Fix prev_cpu handling to guarantee that idle selection never
returns a CPU that's not allowed
- Skip cross-node search when !NUMA which could lead to infinite
looping due to a bug in NUMA iterator"
* tag 'sched_ext-for-6.16-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Skip cross-node search with !CONFIG_NUMA
sched_ext: idle: Properly handle invalid prev_cpu during idle selection
