-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCaD2Y1wAKCRDh3BK/laaZ
PFSHAP4q1+mOlQfZJPH/PFDwa+F0QW/uc3szXatS0888nxui/gEAsIeyyJlf+Mr8
/1JPXxCqcapRFw9xsS0zioiK54Elfww=
=2KxA
-----END PGP SIGNATURE-----
Merge tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Remove tmp page copying in writeback path (Joanne).
This removes ~300 lines and with that a lot of complexity related to
avoiding reclaim related deadlock. The old mechanism is replaced with
a mapping flag that tells the MM not to block reclaim waiting for
writeback to complete. The MM parts have been reviewed/acked by
respective maintainers.
- Convert more code to handle large folios (Joanne). This still just
adds the code to deal with large folios and does not enable them yet.
- Allow invalidating all cached lookups atomically (Luis Henriques).
This feature is useful for CernVMFS, which currently does this
iteratively.
- Align write prefaulting in fuse with generic one (Dave Hansen)
- Fix race causing invalid data to be cached when setting attributes on
different nodes of a distributed fs (Guang Yuan Wu)
- Update documentation for passthrough (Chen Linxuan)
- Add fdinfo about the device number associated with an opened
/dev/fuse instance (Chen Linxuan)
- Increase readdir buffer size (Miklos). This depends on a patch to VFS
readdir code that was already merged through Christians tree.
- Optimize io-uring request expiration (Joanne)
- Misc cleanups
* tag 'fuse-update-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
fuse: increase readdir buffer size
readdir: supply dir_context.count as readdir buffer size hint
fuse: don't allow signals to interrupt getdents copying
fuse: support large folios for writeback
fuse: support large folios for readahead
fuse: support large folios for queued writes
fuse: support large folios for stores
fuse: support large folios for symlinks
fuse: support large folios for folio reads
fuse: support large folios for writethrough writes
fuse: refactor fuse_fill_write_pages()
fuse: support large folios for retrieves
fuse: support copying large folios
fs: fuse: add dev id to /dev/fuse fdinfo
docs: filesystems: add fuse-passthrough.rst
MAINTAINERS: update filter of FUSE documentation
fuse: fix race between concurrent setattrs from multiple nodes
fuse: remove tmp folio for writebacks and internal rb tree
mm: skip folio reclaim in legacy memcg contexts for deadlockable mappings
fuse: optimize over-io-uring request expiration check
...
The lock ordering rules listed as comments in cifsglob.h were
missing some lock details and also the fid_lock.
Updated those notes in this commit.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPUAAKCRCRxhvAZXjc
ouMEAQCrviYPG/WMtPTH7nBIbfVQTfNEXt/TvN7u7OjXb+RwRAEAwe9tLy4GrS/t
GuvUPWAthbhs77LTvxj6m3Gf49BOVgQ=
=6FqN
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull netfs updates from Christian Brauner:
- The main API document has been extensively updated/rewritten
- Fix an oops in write-retry due to mis-resetting the I/O iterator
- Fix the recording of transferred bytes for short DIO reads
- Fix a request's work item to not require a reference, thereby
avoiding the need to get rid of it in BH/IRQ context
- Fix waiting and waking to be consistent about the waitqueue used
- Remove NETFS_SREQ_SEEK_DATA_READ, NETFS_INVALID_WRITE,
NETFS_ICTX_WRITETHROUGH, NETFS_READ_HOLE_CLEAR,
NETFS_RREQ_DONT_UNLOCK_FOLIOS, and NETFS_RREQ_BLOCKED
- Reorder structs to eliminate holes
- Remove netfs_io_request::ractl
- Only provide proc_link field if CONFIG_PROC_FS=y
- Remove folio_queue::marks3
- Fix undifferentiation of DIO reads from unbuffered reads
* tag 'vfs-6.16-rc1.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix undifferentiation of DIO reads from unbuffered reads
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
fs/netfs: remove unused flag NETFS_RREQ_BLOCKED
fs/netfs: remove unused flag NETFS_RREQ_DONT_UNLOCK_FOLIOS
folio_queue: remove unused field `marks3`
fs/netfs: declare field `proc_link` only if CONFIG_PROC_FS=y
fs/netfs: remove `netfs_io_request.ractl`
fs/netfs: reorder struct fields to eliminate holes
fs/netfs: remove unused enum choice NETFS_READ_HOLE_CLEAR
fs/netfs: remove unused flag NETFS_ICTX_WRITETHROUGH
fs/netfs: remove unused source NETFS_INVALID_WRITE
fs/netfs: remove unused flag NETFS_SREQ_SEEK_DATA_READ
There is unmatched xe_vm_unlock() in the __xe_exec_queue_init().
Leftover from commit fbeaad071a ("drm/xe: Create LRC BO without VM")
Fixes: fbeaad071a ("drm/xe: Create LRC BO without VM")
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://lore.kernel.org/r/20250530135627.2821612-1-maciej.patelczyk@intel.com
The j721e driver has a single platform driver that can be built-in or a
loadable module, but it calls two separate backend drivers depending on
whether it is a host or endpoint.
If the two modes are not the same, we can end up with a situation where the
built-in pci-j721e driver tries to call the modular host or endpoint
driver, which causes a link failure:
ld.lld-21: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
ld.lld-21: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
Rework the dependencies so that the 'select' is done by the common Kconfig
symbol, based on which of the two are enabled. Effectively this means that
having one built-in makes the other either built-in or disabled, but all
configurations will now build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250423162523.2060405-1-arnd@kernel.org
The 'pci-j721e.c' driver is the application/glue/wrapper driver for the
Cadence PCIe Controllers on TI SoCs. Implement support for building it as a
loadable module.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-5-s-vadapalli@ti.com
Introduce the helper function cdns_pcie_ep_disable() which will undo the
configuration performed by cdns_pcie_ep_setup(). Also, export it for use
by the existing callers of cdns_pcie_ep_setup(), thereby allowing them
to cleanup on their exit path.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-4-s-vadapalli@ti.com
Introduce the helper function cdns_pcie_host_disable() which will undo
the configuration performed by cdns_pcie_host_setup(). Also, export it
for use by existing callers of cdns_pcie_host_setup(), thereby allowing
them to cleanup on their exit path.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-3-s-vadapalli@ti.com
Currently, the Cadence PCIe controller driver can be built as a built-in
module only. Since PCIe functionality is not a necessity for booting, add
support to build the Cadence PCIe driver as a loadable module as well.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://patch.msgid.link/20250417124408.2752248-2-s-vadapalli@ti.com
Update my e-mail address and add relevant entries to the .mailmap file.
[bhelgaas: drop maintainer status change]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250418045251.7434-1-kwilczynski@kernel.org
No need to split the line in __pci_setup_bridge() as it is way shorter
than the limit.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250404124547.51185-1-ilpo.jarvinen@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaD1hUAAKCRCRxhvAZXjc
ohIBAQCJQYP7bzg+A7C7K6cA+5LwC1u4aZ424B5puIZrLiEEDQEAxQli95/rTIeE
m2DWBDl5rMrKlfmpqGvjbbJldU75swo=
=2EhD
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix the AT_HANDLE_CONNECTABLE option so filesystems that don't know
how to decode a connected non-dir dentry fail the request
- Use repr(transparent) to ensure identical layout between the C and
Rust implementation of struct file
- Add a missing xas_pause() into the dax code employing
wait_entry_unlocked_exclusive()
- Fix FOP_DONTCACHE which we disabled for v6.15.
A folio could get redirtied and/or scheduled for writeback after the
initial dropbehind test. Change the test accordingly to handle these
cases so we can re-enable FOP_DONTCACHE again
* tag 'vfs-6.16-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
exportfs: require ->fh_to_parent() to encode connectable file handles
rust: file: improve safety comments
rust: file: mark `LocalFile` as `repr(transparent)`
fs/dax: Fix "don't skip locked entries when scanning entries"
iomap: don't lose folio dropbehind state for overwrites
mm/filemap: unify dropbehind flag testing and clearing
mm/filemap: unify read/write dropbehind naming
Revert "Disable FOP_DONTCACHE for now due to bugs"
mm/filemap: use filemap_end_dropbehind() for read invalidation
mm/filemap: gate dropbehind invalidate on folio !dirty && !writeback
* Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/.
kernel/ patches acked by Peter Zijlstra.
* Add MGLRU support to the access tracking perf test.
ARM fixes:
* Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change.
* Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o private
IRQs allocated.
* Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum.
* Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping.
* Avoid dereferencing a NULL pointer in the VGIC debug code, which can
happen if the device doesn't have any mapping yet.
s390:
* Fix interaction between some filesystems and Secure Execution
* Some cleanups and refactorings, preparing for an upcoming big series
x86:
* Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
* Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
* Refine and harden handling of spurious faults.
* Add support for ALLOWED_SEV_FEATURES.
* Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
* Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
* Don't account temporary allocations in sev_send_update_data().
* Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
* Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
* Advertise support to userspace for WRMSRNS and PREFETCHI.
* Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
* Add a module param to control and enumerate support for device posted
interrupts.
* Fix a potential overflow with nested virt on Intel systems running 32-bit kernels.
* Flush shadow VMCSes on emergency reboot.
* Add support for SNP to the various SEV selftests.
* Add a selftest to verify fastops instructions via forced emulation.
* Refine and optimize KVM's software processing of the posted interrupt bitmap, and share
the harvesting code between KVM and the kernel's Posted MSI handler
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg9TjwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOUxQf7B7nnWqIKd7jSkGzSD6YsSX9TXktr
2tJIOfWM3zNYg5GRCidg+m4Y5+DqQWd3Hi5hH2P9wUw7RNuOjOFsDe+y0VBr8ysE
ve39t/yp+mYalNmHVFl8s3dBDgrIeGKiz+Wgw3zCQIBZ18rJE1dREhv37RlYZ3a2
wSvuObe8sVpCTyKIowDs1xUi7qJUBoopMSuqfleSHawRrcgCpV99U8/KNFF5plLH
7fXOBAHHniVCVc+mqQN2wxtVJDhST+U3TaU4GwlKy9Yevr+iibdOXffveeIgNEU4
D6q1F2zKp6UdV3+p8hxyaTTbiCVDqsp9WOgY/0I/f+CddYn0WVZgOlR+ow==
=mYFL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
. use new gpio line value settings
. use strscpy() more
-----BEGIN PGP SIGNATURE-----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=NsaM
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- use new gpio line value settings
- use strscpy() more
* tag 'm68knommu-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: Replace memcpy() + manual NUL-termination with strscpy()
m68k/kernel: replace strncpy() with strscpy()
m68k: coldfire: gpio: use new line value setter callbacks
When calling cifs_reconnect, before the connection to the
server is reestablished, the code today does a DNS resolution and
updates server->dstaddr.
However, this is not necessary for secondary channels. Secondary
channels use the interface list returned by the server to decide
which address to connect to. And that happens after tcon is reconnected
and server interfaces are requested.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When the server interface info changes (more common in clustered
servers like Azure Files), the per-channel iface gets updated.
However, this did not update the corresponding dstaddr. As a result
these channels will still connect (or try connecting) to older addresses.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_reconnect can be called with a flag to mark the session as needing
reconnect too. When this is done, we expect the connections of all
channels to be reconnected too, which is not happening today.
Without doing this, we have seen bad things happen when primary and
secondary channels are connected to different servers (in case of cloud
services like Azure Files SMB).
This change would force all connections to reconnect as well, not just
the sessions and tcons.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- support for game controllers requiring delayed initialization
packets, such as ByoWave Proteus, in xpad driver
- a change to atkbd driver to not reset the keyboard on Loongson devices
- tweaks to gpio-keys and matrix_keypad drivers
- fixes to documentation for Amiga joysticks
- a fix to ims-pcu driver to better handle malformed firmware.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaD0unwAKCRBAj56VGEWX
nOfoAQCX4WWJumaFu9wAix2cdu+zfNNmqvtOZu0rWrs0ah8NzgD/VGLoemFf3gg3
SjetSN3yHI5XUicvs2Jcydts7n3GMgI=
=32Le
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for game controllers requiring delayed initialization
packets, such as ByoWave Proteus, in xpad driver
- a change to atkbd driver to not reset the keyboard on Loongson
devices
- tweaks to gpio-keys and matrix_keypad drivers
- fixes to documentation for Amiga joysticks
- a fix to ims-pcu driver to better handle malformed firmware
* tag 'input-for-v6.16-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ims-pcu - check record size in ims_pcu_flash_firmware()
Input: gpio-keys - fix possible concurrent access in gpio_keys_irq_timer()
Input: gpio-keys - fix a sleep while atomic with PREEMPT_RT
Input: amijoy - make headings compliant w/ guidelines in documentation
Input: amijoy - fix grammar in documentation
Input: amijoy - fix Amiga 4-joystick adapter pinout in documentation
Input: amijoy - fix broken table formatting in documentation
Input: atkbd - do not reset keyboard by default on Loongson
Input: xpad - send LED and auth done packets to all Xbox One controllers
Input: xpad - add the ByoWave Proteus controller
Input: xpad - allow delaying init packets
MAINTAINERS: update dlg,da72??.txt to yaml
dt-bindings: input: convert dlg,da7280.txt to dt-schema
dt-bindings: input: touchscreen: edt-ft5x06: use unevaluatedProperties
Input: snvs_pwrkey - support power-off-time-sec
dt-bindings: crypto: fsl,sec-v4.0-mon: Add "power-off-time-sec"
Input: matrix_keypad - detect change during scan
Input: matrix_keypad - add function for reading row state
register a master device. This is a problem that has been there forever:
the "master" device was not always present depending on a number of
heuristics such as the presence of fixed partitions and the absence of a
Kconfig symbol to force its presence. This was a problem for runtime PM
operations which might not have the "master" device available in all
situation.
The SPI NAND subsystem has seen the introduction of DTR operations (the
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmg91NEACgkQJWrqGEe9
VoR8egf+JPTtykQ+Bip9bHStgfpxi0+OKL81PUuPBsbs5C546u5t6ZRhoPsU+KqL
ZTyUk3ys7HcSwZCuiS9V6ea6TNV1FvAVZm+ONpkuPnU60++z8YfVr8ZvtgT0IUXx
COi+5ksdsTFZMyRG+VybRKnYNrTYB7j7CqVL8ifxq1XYWnYdhjy5PH4DgAKnBhGL
523kN2eR85AhvJ4aulsKbcqQQYKvJIQbhjAKklA3yQVarDmoOdiSmndoZlRy+MDu
B9DaRMvRRa/g1nI0stvR9K7FtdSrMYTg4kowR9jPRx0zEZXFFsZbASgcC+3G7HdK
7rLFWrN+G6fitcEjeAnfyV+sKF48LA==
=tW1t
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"A big core MTD change is the introduction of a new class to always
register a master device. This is a problem that has been there
forever: the "master" device was not always present depending on a
number of heuristics such as the presence of fixed partitions and the
absence of a Kconfig symbol to force its presence. This was a problem
for runtime PM operations which might not have the "master" device
available in all situation.
The SPI NAND subsystem has seen the introduction of DTR operations
(the equivalent of DDR transfers), which involved quite a few
preparation patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for
old legacy SoCs with an update of the ->exec_op() hook, there has been
the introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Finally, Macornix SPI NOR entries have been cleaned-up and some SFDP
table fixups for Macronix MX25L3255E have been merged.
Aside from this, there is the usual load of misc improvement, fixes,
and yaml conversion"
* tag 'mtd/for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (42 commits)
mtd: rawnand: brcmnand: legacy exec_op implementation
mtd: rawnand: sunxi: Add randomizer configuration in sunxi_nfc_hw_ecc_write_chunk
mtd: nand: brcmnand: fix NAND timeout when accessing eMMC
mtd: nand: sunxi: Add randomizer configuration before randomizer enable
mtd: spinand: esmt: fix id code for F50D1G41LB
mtd: rawnand: brcmnand: remove unused parameters
mtd: core: always create master device
mtd: rawnand: loongson1: Fix inconsistent refcounting in ls1x_nand_chip_init()
mtd: rawnand: loongson1: Fix error code in ls1x_nand_dma_transfer()
mtd: rawnand: qcom: Fix read len for onfi param page
mtd: rawnand: qcom: Fix last codeword read in qcom_param_page_type_exec()
mtd: rawnand: qcom: Pass 18 bit offset from NANDc base to BAM base
dt-bindings: mtd: qcom,nandc: Document the SDX75 NAND controller
mtd: bcm47xxnflash: Add error handling for bcm47xxnflash_ops_bcm4706_ctl_cmd()
mtd: rawnand: Use non-hybrid PCI devres API
mtd: nand: ecc-mxic: Fix use of uninitialized variable ret
mtd: spinand: winbond: Add support for W35N02JW and W35N04JW chips
mtd: spinand: winbond: Add octal support
mtd: spinand: winbond: Add support for W35N01JW in single mode
mtd: spinand: winbond: Rename DTR variants
...
Remove some dead and unused code from core and virtio modules.
Improve the error messages from the Qualcomm SMD driver and initialize
an uninitialized variable in the send path.
-----BEGIN PGP SIGNATURE-----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=+K4g
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Remove some dead and unused code from core and virtio modules
- Improve the error messages from the Qualcomm SMD driver and
initialize an uninitialized variable in the send path
* tag 'rpmsg-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: qcom_smd: Fix uninitialized return variable in __qcom_smd_send()
rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge
rpmsg: Remove unused method pointers *send_offchannel
rpmsg: virtio: Remove uncallable offchannel functions
rpmsg: core: Remove deadcode
Fix resource cleanup in the remoteproc attach error handling code paths.
Refactor the various TI K3 drivers to extract and reuse common code
between them.
Add support in the i.MX remoteproc driver for determining from the
firmware if Linux should wait on a "firmware ready" signal at startup.
Improve the Xilinx R5F power down mechanism to handle use cases where
this is shared with other entities in the system.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmg9xP0VHGFuZGVyc3Nv
bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3F/SEP/RgSiBNIMRYdBw/MT+FnSDv4kScE
GvZZnW/FStjx+c+HIbTjMUjONWuDqBryx3FCVscp4OQKFXlfdd7OerVRPxaSvCzU
QeB0Yi2ojnceUhh+t1AUC+27LO31h7sHzX/WpSLG2faUrq/p4vICSHiiS7LxVkmX
s5KCJXCwnHEgfr2/g1yer/uo4KnNVxpAjRUPsYncWkAvDqCtTu8dA4wzCCeIvSGk
kVZPVfPscKyP/YLxYUiwaNkxALjoAZS9sJ41eL76lic/GH3g8j96yFjOVhyiu0R4
f9eZ9ebHdFaF6kpBLuc+46govlw2ZhP/c6sivNcGYuKBRjoMI3UsQ3AvwuW3DE+D
qiVbMlodRHuwbw/582NsMfe5+iskyBzyQkoiqJcit2kDTcKh5DDErH9Q72ceXzr3
hklgFFyIBmYVfLva807/0FiLKTJyJf9PVFy75BX/1m0MaoZeXyW/XohCqNgzlaW6
n0j1MqDP42+fayJjOuS2e7hu4W+CpUQNgD2Ec5U7kV8pUVPIWsowl6O135LU+T8T
Wkw5tt/3rsJGSY3RE0oGHUdnEEqk/Bk8NWP1rfqZiMpKCDOtY+pVSfiWTkJgGNOR
UqfC5f8GcGp0TYGAFmNA8svddP7Yq9ZUAlFKFTgeWHsLK1GbPHkr0XOK2RpKcfgs
99T869RX8nA9vx9k
=GCF8
-----END PGP SIGNATURE-----
Merge tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Fix resource cleanup in the remoteproc attach error handling code
paths
- Refactor the various TI K3 drivers to extract and reuse common code
between them
- Add support in the i.MX remoteproc driver for determining from the
firmware if Linux should wait on a "firmware ready" signal at startup
- Improve the Xilinx R5F power down mechanism to handle use cases where
this is shared with other entities in the system
* tag 'rproc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (46 commits)
remoteproc: k3: Refactor release_tsp() functions into common driver
remoteproc: k3: Refactor reserved_mem_init() functions into common driver
remoteproc: k3: Refactor mem_release() functions into common driver
remoteproc: k3: Refactor of_get_memories() functions into common driver
remoteproc: k3: Refactor .da_to_va rproc ops into common driver
remoteproc: k3: Refactor .get_loaded_rsc_table ops into common driver
remoteproc: k3: Refactor .detach rproc ops into common driver
remoteproc: k3: Refactor .attach rproc ops into common driver
remoteproc: k3: Refactor .stop rproc ops into common driver
remoteproc: k3: Refactor .start rproc ops into common driver
remoteproc: k3: Refactor .unprepare rproc ops into common driver
remoteproc: k3: Refactor .prepare rproc ops into common driver
remoteproc: k3-dsp: Assert local reset during .prepare callback
remoteproc: k3-dsp: Don't override rproc ops in IPC-only mode
remoteproc: k3: Refactor rproc_request_mbox() implementations into common driver
remoteproc: k3-m4: Ping the mbox while acquiring the channel
remoteproc: k3: Refactor rproc_release() implementation into common driver
remoteproc: k3-m4: Introduce central function to release rproc from reset
remoteproc: k3-dsp: Correct Reset deassert logic for devices w/o lresets
remoteproc: k3: Refactor rproc_reset() implementation into common driver
...
Add the internal configfs API like is done with other parts of the
driver. Also ensure the correct number of '=' chars are used for the
header.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-5-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add the userspace interface to load the driver with fewer engines.
The syntax is to just echo the engine names to a file in configfs, like
below:
echo 'rcs0,bcs0' > /sys/kernel/config/xe/<bdf>/engine_allowed
With that engines other than rcs0 and bcs0 will not be enabled. To
enable all instances from a class, a '*' can be used.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-4-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Sometimes it's useful to load the driver with a smaller set of engines
to allow more targeted debugging, particularly on early enabling.
Besides checking what is fused off in hardware, add similar logic to
disable engines in software. This will use configfs to allow users
to set what engine to disable, so already add prepare for that. The
exact configfs interface will be added later.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-3-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
It's useful to see in the log message what GT was being checked for
disabled/fused-off engines. Especially on multi-tile platforms the
different tiles may be fused differently making it harder to parse
the information.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250528-engine-mask-v4-2-f4636d2a890a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We have stress_03, stress_04 and stress_05 for checking new feature vs.
stress IO & device removal & ublk server crash & recovery, so let the
three existing stress tests cover PER_IO_DAEMON.
Then stress_06 can be removed, since the same test function is included in
stress_03.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250602132113.1398645-1-ming.lei@redhat.com
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
[axboe: remove test_stress_06.sh from Makefile too]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There could be a scenario where the VF driver is resuming faster
than the driver PF is able to complete the VF FLR sequence which
includes reset of the VF scratch registers. This may result in
deletion of the ongoing HXG message (it could be either a host
request or a GuC response).
When we detect that HXG message was likey lost (scratch register
with HXG header was zeroed) try to send this request once more
before giving up.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20250528090021.329-1-michal.wajdeczko@intel.com
During the probe we dump the discovered GT topology, but instead
of a generic printer we can use our own GT-oriented printer which
contains information about the source GT.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250530210524.505-1-michal.wajdeczko@intel.com
We are processing here G2H messages, so we should use GT oriented
messages to retain information about the origin GT. While at it,
print error codes in a user-friendly way.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250530164835.461-1-michal.wajdeczko@intel.com
The change to allow page_pool to handle its own page destruction instead
of relying on XDP removed the trace_mem_return_failed() tracepoint caller,
but did not remove the mem_return_failed trace event. As trace events take
up memory when they are created regardless of if they are used or not,
having this unused event around wastes around 5K of memory.
Remove the unused event.
Link: https://lore.kernel.org/all/20250529130138.544ffec4@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250529160550.1f888b15@gandalf.local.home
Fixes: c3f812cea0 ("page_pool: do not release pool until inflight == 0.")
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If ftrace is disabled, it is meaningless to allocate a module map.
Add a check in allocate_ftrace_mod_map() to not allocate if ftrace is
disabled.
Link: https://lore.kernel.org/20250529111955.2349189-3-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The following issue happens with a buggy module:
BUG: unable to handle page fault for address: ffffffffc05d0218
PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
RIP: 0010:sized_strscpy+0x81/0x2f0
RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000
RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608da2d
RBP: 8080808080808080 R08: ffff88812608da2d R09: ffff88812608da68
R10: ffff88812608d82d R11: ffff88812608d810 R12: 0000000000000038
R13: ffff88812608da2d R14: ffffffffc05d0218 R15: fefefefefefefeff
FS: 00007fef552de740(0000) GS:ffff8884251c7000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc05d0218 CR3: 00000001146f0000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
ftrace_mod_get_kallsym+0x1ac/0x590
update_iter_mod+0x239/0x5b0
s_next+0x5b/0xa0
seq_read_iter+0x8c9/0x1070
seq_read+0x249/0x3b0
proc_reg_read+0x1b0/0x280
vfs_read+0x17f/0x920
ksys_read+0xf3/0x1c0
do_syscall_64+0x5f/0x2e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The above issue may happen as follows:
(1) Add kprobe tracepoint;
(2) insmod test.ko;
(3) Module triggers ftrace disabled;
(4) rmmod test.ko;
(5) cat /proc/kallsyms; --> Will trigger UAF as test.ko already removed;
ftrace_mod_get_kallsym()
...
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
...
The problem is when a module triggers an issue with ftrace and
sets ftrace_disable. The ftrace_disable is set when an anomaly is
discovered and to prevent any more damage, ftrace stops all text
modification. The issue that happened was that the ftrace_disable stops
more than just the text modification.
When a module is loaded, its init functions can also be traced. Because
kallsyms deletes the init functions after a module has loaded, ftrace
saves them when the module is loaded and function tracing is enabled. This
allows the output of the function trace to show the init function names
instead of just their raw memory addresses.
When a module is removed, ftrace_release_mod() is called, and if
ftrace_disable is set, it just returns without doing anything more. The
problem here is that it leaves the mod_list still around and if kallsyms
is called, it will call into this code and access the module memory that
has already been freed as it will return:
strscpy(module_name, mod_map->mod->name, MODULE_NAME_LEN);
Where the "mod" no longer exists and triggers a UAF bug.
Link: https://lore.kernel.org/all/20250523135452.626d8dcd@gandalf.local.home/
Cc: stable@vger.kernel.org
Fixes: aba4b5c22c ("ftrace: Save module init functions kallsyms symbols for tracing")
Link: https://lore.kernel.org/20250529111955.2349189-2-yebin@huaweicloud.com
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Aside from this, there is the usual load of misc improvement and fixes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmg90ysACgkQJWrqGEe9
VoTK8gf/U+28sdthNVHENmeQwgzMdjAaZkEn0qftRVplPUTGSqvkrTBQ2tsyGVpj
V2jJ85WzQ6c+YVRjUsgojX4JClh0tfNrm8ySSu3TOAv98E/sCFttQgyCbELtt6GL
P4/1g/BqHlagi1ouU95AtH3njZX9qXBq9cQGz3ZWX+qeS0p52wPsj1G8iy6syBR+
M6GZI92iINSXJUBlFBXzijDSxqcLWsAg8P2E5dTyL9Ukjcju0+fSQtt1oCp1F50+
zXJHfj3mB+BtBnX6nGhMu3sqY7LaM2NpEq7k6xtvo9ivWZwFAOK+uc31iGvAcKaZ
R1A72QkRE3e0vQZjrX1JKZvXMVXt4Q==
=Uj/O
-----END PGP SIGNATURE-----
Merge tag 'nand/for-6.16' into mtd/next
The SPI NAND subsystem has seen the introduction of DTR operations (the
equivalent of DDR transfers), which involved quite a few preparation
patches for clarifying macro names.
In the raw NAND subsystem, the brcmnand driver has been "fixed" for old
legacy SoCs with an update of the ->exec_op() hook, there has been the
introduction of a new controller driver named Loongson-1, and the
Qualcomm driver has received quite a few misc fixes as well as a new
compatible.
Aside from this, there is the usual load of misc improvement and fixes.
Like done in commit eaa287069a ("drm/xe/guc_submit: Simplify and fix
diff calculation"), just use u32 for wrapping the value, which is
simpler and more correct: when wrapping on 32b, the accumulated value
was off by one.
Also, do not mix the u64 value from pmt with the u32 value used for the
calculation.
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250530-xe-hwmon-wrap-v2-1-ce653db7fe4a@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add proper support for external clock to the AXI PWM generator driver.
In most cases, the HDL for this IP block is compiled with the default
ASYNC_CLK_EN=1. With this option, there is a separate external clock
that drives the PWM output separate from the peripheral clock. So the
driver should be enabling the "axi" clock to power the peripheral and
the "ext" clock to drive the PWM output.
When ASYNC_CLK_EN=0, the "axi" clock is also used to drive the PWM
output and there is no "ext" clock.
Previously, if there was a separate external clock, users had to specify
only the external clock and (incorrectly) omit the AXI clock in order
to get the correct operating frequency for the PWM output.
The devicetree bindings are updated to fix this shortcoming and this
patch changes the driver to match the new bindings. To preserve
compatibility with any existing dtbs that specify only one clock, we
don't require the clock name on the first clock.
Fixes: 41814fe5c7 ("pwm: Add driver for AXI PWM generator")
Cc: stable@vger.kernel.org
Acked-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Trevor Gamblin <tgamblin@baylibre.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250529-pwm-axi-pwmgen-add-external-clock-v3-3-5d8809a7da91@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Fix a shortcoming in the bindings that doesn't allow for a separate
external clock.
The AXI PWMGEN IP block has a compile option ASYNC_CLK_EN that allows
the use of an external clock for the PWM output separate from the AXI
clock that runs the peripheral.
This was missed in the original bindings and so users were writing dts
files where the one and only clock specified would be the external
clock, if there was one, incorrectly missing the separate AXI clock.
The correct bindings are that the AXI clock is always required and the
external clock is optional (must be given only when HDL compile option
ASYNC_CLK_EN=1).
Fixes: 1edf2c2a28 ("dt-bindings: pwm: Add AXI PWM generator")
Cc: stable@vger.kernel.org
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250529-pwm-axi-pwmgen-add-external-clock-v3-2-5d8809a7da91@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Snapshot deletion v2 added sentinal values for deleted snapshots, so
"key for deleted snapshot" - i.e. snapshot deletion missed something -
is safe to repair automatically.
But if we find a key for a missing snapshot we have no idea what
happened, and we shouldn't delete it unless we're very sure that
everything else is consistent.
So hook it up to the new bch2_require_recovery_pass(), we'll now only
delete if snapshots and subvolumes have recenlty been checked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a superblock flag to temporarily disable ratelimiting for a recovery
pass.
This will be used to make check_key_has_snapshot safer: we don't want to
delete a key for a missing snapshot unless we know that the snapshots
and subvolumes btrees are consistent, i.e. check_snapshots and
check_subvols have run recently.
Changing those btrees - creating/deleting a subvolume or snapshot - will
set the "disable ratelimit" flag, i.e. ensuring that those passes run if
check_key_has_snapshot discovers an error.
We're only disabling ratelimiting in the snapshot/subvol delete paths,
we're not so concerned about the create paths.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a helper for requiring that a recovery pass has already run: either
run it directly, if we're still in recovery, or if we're not in recovery
check if it has run recently and schedule it if it hasn't.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We had a bug due due to an incomplete revert of the patch implementing
directory i_size (summing up the size of the dirents), leading to
completely screwy i_size values that underflow.
Most userspace programs don't seem to care (e.g. du ignores it), but it
turns out this broke sshfs, so needs to be repaired.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
