The maximum amount of data to transfer in a single DMA request is
calculated from the FIFO sizes (which is technically not 100% correct,
but a simplification, as it is limited by the maximum word count values
in the Transmit and Control Data Registers). However, in case there is
both data to transmit and to receive, the transmit limit is overwritten
by the receive limit.
Fix this by using the minimum applicable FIFO size instead. Move the
calculation outside the loop, so it is not repeated for each individual
DMA transfer.
As currently tx_fifo_size is always equal to rx_fifo_size, this bug had
no real impact.
Fixes: fe78d0b769 ("spi: sh-msiof: Fix FIFO size to 64 word from 256 word")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d9961767a97758b2614f2ee8afe1bd56dc900a60.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The Clock-Synchronized Serial Interfaces with FIFO (MSIOF) driver
matches against both SoC-specific and family-specific compatible values
to maintain backwards-compatibility with old DTBs predating the
introduction of the family-specific compatible values.
For RZ/G1, the SoC-specific compatible match entry can be removed from
the driver: their DT always had the family-specific compatible values,
and thus there was never a need to add the SoC-specific compatible
values to the driver.
For R-Car Gen2 and M3-W, the SoC-specific compatible match entries can
be removed, too, as there are a few points in time where DT
backwards-compatibility was broken for other reasons:
- Legacy DT clock support is no longer supported since commit
58256143cf ("clk: renesas: Remove R-Car Gen2 legacy DT clock
support") in v5.5, and the addition of "renesas,rcar-gen2-msiof" to
DTS in v4.11 predates the completion of the clock conversion in
v4.15,
- Legacy DT LVDS support is no longer supported since commit
841281fe52 ("drm: rcar-du: Drop LVDS device tree backward
compatibility") in v5.18, and the addition of
"renesas,rcar-gen3-msiof" in commit 8b51f97138 ("arm64: dts:
r8a7796: Use R-Car Gen 3 fallback binding for msiof nodes") in v4.11
predates the LVDS conversion in commit 58e8ed2ee9 ("arm64:
dts: renesas: Convert to new LVDS DT bindings") in v4.20.
For R-Car H3, the SoC-specific compatible match entry cannot be removed,
as its purpose is to handle an SoC-specific quirk.
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/d33393ac7536bc3f0f624b079f70d80dd19843db.1747401908.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
'struct spmi_voltage_range' are only modified at runtime to compile a
field, n_voltages, that could be computed at compile time.
So, simplify spmi_calculate_num_voltages() and compute n_voltages at
compile time within the SPMI_VOLTAGE_RANGE macro.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
85437 26776 512 112725 1b855 drivers/regulator/qcom_spmi-regulator.o
After:
=====
text data bss dec hex filename
86857 24760 512 112129 1b601 drivers/regulator/qcom_spmi-regulator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/ef2a4b6df61e19470ddf6cbd1f3ca1ce88a3c1a0.1747570556.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The architecture introduces a trap for TSB CSYNC that fits in
the same EC as LS64 and PSB CSYNC. Let's deal with it in a similar
way.
It's not that we expect this to be useful any time soon anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Just like we allow sysreg ranges for Coarse Grained Trap descriptors,
allow them for Fine Grain Traps as well.
This comes with a warning that not all ranges are suitable for this
particular definition of ranges.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Just like the rest of the FGT registers, perform a switch of the
FGT2 equivalent. This avoids the host configuration leaking into
the guest...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similarly to the FEAT_FGT registers, pick the correct FEAT_FGT2
register when a sysreg trap indicates they could be responsible
for the exception.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Just like the FEAT_FGT registers, treat the FGT2 variant the same
way. THis is a large update, but a fairly mechanical one.
The config dependencies are extracted from the 2025-03 JSON drop.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The FEAT_FGT2 registers are part of the VNCR page. Describe the
corresponding offsets and add them to the vcpu sysreg enumeration.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similarly to other registers, describe which HCR_EL2 bit depends
on which feature, and use this to compute the RES0 status of these
bits.
An additional complexity stems from the status of some bits such
as E2H and RW, which do not had a RESx status, but still take
a fixed value due to implementation choices in KVM.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similarly to other registers, describe which HCR_EL2 bit depends
on which feature, and use this to compute the RES0 status of these
bits.
Signed-off-by: Marc Zyngier <maz@kernel.org>
In order to be able to write more compact (and easier to read) code,
let kvm_has_feat() and co take variable arguments. This enables
constructs such as:
#define FEAT_SME ID_AA64PFR1_EL1, SME, IMP
if (kvm_has_feat(kvm, FEAT_SME))
[...]
which is admitedly more readable.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Another benefit of mapping bits to features is that it becomes trivial
to define which bits should be handled as RES0.
Let's apply this principle to the guest's view of the FGT registers.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Update text binding to YAML.
Changes during conversion:
Add appropriate include statements for interrupts and clock-names
to resolve errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507-mchp-sdhci-v1-2-ed29de05295a@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use kmemdup_array() to avoid multiplication and possible overflows.
Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The register EMP_AS_SDP_TL (MTL) was introduced for configuring the
double buffering point and transmission line for all
HDMI2.1 Extended Metadata Packets (VT-EMP for VRR, CVT-EMP for DSC etc).
This was also intended to be configured for DP to HDMI2.1 PCON to
support VRR.
From BMG and LNL+ onwards, this register was extended to Display Port
Adaptive Sync SDP to have a common register to configure double
buffering point and transmission line for both HDMI EMPs and DP VRR related
packets.
Currently, we do not support VRR for either native HDMI or via PCON.
However we need to configure this for DP SDP case. As per the spec,
program the register to set Vsync start as the double buffering point
for DP AS SDP.
v2:
-Make the helper more readable. (Jani)
-Add more information in commit message and comment.
Bspec:70984, 71197
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250505033911.393628-1-ankit.k.nautiyal@intel.com
When DP connected to a device with HDR capability,
the hdr structure was filled.Then connected to another
sink device without hdr capability, but the hdr info
still exist.
Fixes: e85959d6cb ("drm: Parse HDR metadata info from EDID")
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: "feijuan.li" <feijuan.li@samsung.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250514063511.4151780-1-feijuan.li@samsung.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Remove all the code related to changing compression on the fly because
it's not safe and not maintainable.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Add initial abstractions for the clk APIs. These provide the minimal
functionality needed for common use cases, making them straightforward
to introduce in the first iteration.
These will be used by Rust based cpufreq / OPP layers to begin with.
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Non-trivial C macros and inlined C functions cannot be used directly
in the Rust code and are used via functions ("helpers") that wrap
those so that they can be called from Rust.
In order to prepare for adding Rust abstractions for the clock APIs,
add clock helpers required by the Rust implementation.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Update the MAINTAINERS file to include the Rust abstractions for cpumask
API.
Yury has indicated that he does not wish to maintain the Rust code but
would like to be listed as a reviewer.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Add initial Rust abstractions for struct cpumask, covering a subset of
its APIs. Additional APIs can be added as needed.
These abstractions will be used in upcoming Rust support for cpufreq and
OPP frameworks.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Add few more cpumask helpers that are required by the Rust abstraction.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Describe the two new vcpu flags that control NV, together with
the capabilities that advertise them.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/20250514103501.2225951-18-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since we're (almost) feature complete, let's allow userspace to
request KVM_ARM_VCPU_EL2* by bumping KVM_VCPU_MAX_FEATURES up.
We also now advertise the features to userspace with new capabilities.
It's going to be great...
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250514103501.2225951-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we have to handle TLBI S1E2 in the core code, plumb the
sysinsn dispatch code into it, so that these instructions don't
just UNDEF anymore.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-15-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
A TLBI by VA for S1 must take effect on our pseudo-TLB for VNCR
and potentially knock the fixmap mapping. Even worse, that TLBI
must be able to work cross-vcpu.
For that, we track on a per-VM basis if any VNCR is mapped, using
an atomic counter. Whenever a TLBI S1E2 occurs and that this counter
is non-zero, we take the long road all the way back to the core code.
There, we iterate over all vcpus and check whether this particular
invalidation has any damaging effect. If it does, we nuke the pseudo
TLB and the corresponding fixmap.
Yes, this is costly.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-14-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Since we now have a way to map the guest's VNCR_EL2 on the host,
we can point the host's VNCR_EL2 to it and go full circle!
Note that we unconditionally assign the fixmap to VNCR_EL2,
irrespective of the guest's version being mapped or not. We want
to take a fault on first access, so the fixmap either contains
something guranteed to be either invalid or a guest mapping.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-13-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
During an invalidation triggered by an MMU notifier, we need to
make sure we can drop the *host* mapping that would have been
translated by the stage-2 mapping being invalidated.
For the moment, the invalidation is pretty brutal, as we nuke
the full IPA range, and therefore any VNCR_EL2 mapping.
At some point, we'll be more light-weight, and the code is able
to deal with something more targetted.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we can handle faults triggered through VNCR_EL2, we need
to map the corresponding page at EL2. But where, you'll ask?
Since each CPU in the system can run a vcpu, we need a per-CPU
mapping. For that, we carve a NR_CPUS range in the fixmap, giving
us a per-CPU va at which to map the guest's VNCR's page.
The mapping occurs both on vcpu load and on the back of a fault,
both generating a request that will take care of the mapping.
That mapping will also get dropped on vcpu put.
Yes, this is a bit heavy handed, but it is simple. Eventually,
we may want to have a per-VM, per-CPU mapping, which would avoid
all the TLBI overhead.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
As VNCR_EL2.BADDR contains a VA, it is bound to trigger faults.
These faults can have multiple source:
- We haven't mapped anything on the host: we need to compute the
resulting translation, populate a TLB, and eventually map
the corresponding page
- The permissions are out of whack: we need to tell the guest about
this state of affairs
Note that the kernel doesn't support S1POE for itself yet, so
the particular case of a VNCR page mapped with no permissions
or with write-only permissions is not correctly handled yet.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Plug VNCR_EL2 in the vcpu_sysreg enum, define its RES0/RES1 bits,
and make it accessible to userspace when the VM is configured to
support FEAT_NV2.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
FEAT_NV2 introduces an interesting problem for NV, as VNCR_EL2.BADDR
is a virtual address in the EL2&0 (or EL2, but we thankfully ignore
this) translation regime.
As we need to replicate such mapping in the real EL2, it means that
we need to remember that there is such a translation, and that any
TLBI affecting EL2 can possibly affect this translation.
It also means that any invalidation driven by an MMU notifier must
be able to shoot down any such mapping.
All in all, we need a data structure that represents this mapping,
and that is extremely close to a TLB. Given that we can only use
one of those per vcpu at any given time, we only allocate one.
No effort is made to keep that structure small. If we need to
start caching multiple of them, we may want to revisit that design
point. But for now, it is kept simple so that we can reason about it.
Oh, and add a braindump of how things are supposed to work, because
I will definitely page this out at some point. Yes, pun intended.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently check for HCR_EL2.NV being set to decide whether we
need to repaint PSTATE.M to say EL2 instead of EL1 on exit.
However, this isn't correct when L2 is itself a hypervisor, and
that L1 as set its own HCR_EL2.NV. That's because we "flatten"
the state and inherit parts of the guest's own setup. In that case,
we shouldn't adjust PSTATE.M, as this is really EL1 for both us
and the guest.
Instead of trying to try and work out how we ended-up with HCR_EL2.NV
being set by introspecting both the host and guest states, use
a per-CPU flag to remember the context (HYP or not), and use that
information to decide whether PSTATE needs tweaking.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
As we are about to expand out TLB invalidation capabilities to support
recursive virtualisation, move the decoding of a TLBI by range into
a helper that returns the base, the range and the ASID.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently completely ignore any sort of ASID tagging during a S1
walk, as AT doesn't care about it.
However, such information is required if we are going to create
anything that looks like a TLB from this walk.
Let's capture it both the nG and ASID information while walking
the page tables.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The address translation infrastructure is currently pretty tied to
the AT emulation.
However, we also need to features that require the use of VAs, such
as VNCR_EL2 (and maybe one of these days SPE), meaning that we need
a slightly more generic infrastructure.
Start this by introducing a new helper (__kvm_translate_va()) that
performs a S1 walk for a given translation regime, EL and PAN
settings.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
If running a NV guest on an ARMv8.4-NV capable system, let's
allocate an additional page that will be used by the hypervisor
to fulfill system register accesses.
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we're about to emulate VNCR_EL2, we need its full layout.
Add it to the sysreg file.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250514103501.2225951-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Bspec comment on PSR2_SU_STATUS:
"This register has been tied-off since DG2/ADL-P (it returns zeros only)
and it has been removed on Xe2_LPD."
v2: fix inversed logic
Bspec: 69889
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250516063019.2126702-1-jouni.hogander@intel.com
