Fix MAX_REG_OFFSET calculation, make it point to the last register
in 'struct pt_regs' and not to the marker itself, which could allow
regs_get_register() to return an invalid offset.
Cc: stable@vger.kernel.org
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When CONFIG_PREEMPT_COUNT is not configured (i.e. CONFIG_PREEMPT_NONE/
CONFIG_PREEMPT_VOLUNTARY), preempt_disable() / preempt_enable() merely
acts as a barrier(). However, in these cases cond_resched() can still
trigger a context switch and modify the CSR.EUEN, resulting in do_fpu()
exception being activated within the kernel-fpu critical sections, as
demonstrated in the following path:
dcn32_calculate_wm_and_dlg()
DC_FP_START()
dcn32_calculate_wm_and_dlg_fpu()
dcn32_find_dummy_latency_index_for_fw_based_mclk_switch()
dcn32_internal_validate_bw()
dcn32_enable_phantom_stream()
dc_create_stream_for_sink()
kzalloc(GFP_KERNEL)
__kmem_cache_alloc_node()
__cond_resched()
DC_FP_END()
This patch is similar to commit d021985504 (x86/fpu: Improve crypto
performance by making kernel-mode FPU reliably usable in softirqs). It
uses local_bh_disable() instead of preempt_disable() for non-RT kernels
so it can avoid the cond_resched() issue, and also extend the kernel-fpu
application scenarios to the softirq context.
Cc: stable@vger.kernel.org
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The H-A133L board is an industrial development board made by Liontron.
It contains a number of dedicated JST connectors, to connect external
peripherals. It features:
- Allwinner A133 SoC (4 * Arm Cortex-A53 cores at up to 1.6 GHz)
- 1 GiB, 2 GiB or 4 GiB of LPDDR4 DRAM
- between 16 and 128 GiB eMMC flash
- AXP707 PMIC (compatible to AXP803)
- 100 Mbit/s RJ45 Ethernet socket, using an JLSemi JL1101 PHY
- XR829 WIFI+Bluetooth chip
- 2 * USB 2.0 USB-A ports, plus three sets of USB pins on connectors
(connected via a USB hub connected to USB1 on the SoC)
- microSD card slot
- 3.5mm A/V port
- 12V power supply
- connectors for an LVDS or MIPI-DSI panel
Add the devicetree describing the board's peripherals and their
connections.
Despite being a devboard, the manufacturer does not publish a schematic
(I asked), so the PMIC rail assignments were bases on BSP dumps,
educated guesses and some experimentation. Dropping the always-on
property from any of the rails carrying it will make the board hang as
soon as the kernel turns off unused regulators.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505164729.18175-4-andre.przywara@arm.com
[wens@csie.org: fix property in &usbphy; fix comment typo in &usb_otg]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
For fsl,imx93-edma4 two DMA channels share the same interrupt.
So in case fsl_edma3_tx_handler is called for the "wrong"
channel, the return code must be IRQ_NONE. This signalize that
the interrupt wasn't handled.
Fixes: 72f5801a4e ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Joy Zou <joy.zou@nxp.com>
Link: https://lore.kernel.org/r/20250424114829.9055-1-wahrenst@gmx.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit adds prefetch support for SVM ranges, utilizing the
existing ioctl vm_bind functionality to achieve this.
v2: rebase
v3:
- use xa_for_each() instead of manual loop
- check range is valid and in preferred location before adding to
xarray
- Fix naming conventions
- Fix return condition as -ENODATA instead of -EAGAIN (Matthew Brost)
- Handle sparsely populated cpu vma range (Matthew Brost)
v4:
- fix end address to find next cpu vma in case of -ENOENT
v5:
- Move find next vma logic to drm gpusvm layer
- Avoid mixing declaration and logic
v6:
- Use new function names
- Move eviction logic to prefetch_ranges
v7:
- devmem_only assigned 0
- nit address
v8:
- initialize ctx with 0
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-15-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Add helper xe_svm_find_vma_start() function to determine start of cpu
vma in input range.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-14-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
The drm_gpusvm_find_vma_start() function is used to determine the starting
address of a CPU VMA within a specified user range. If the range does not
contain any VMA, the function returns ULONG_MAX.
v2
- Rename function as drm_gpusvm_find_vma_start() (Matthew Brost)
- mmget/mmput
v3
- s/mmget/mmget_not_zero/
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-13-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
The xe_svm_range_validate() function checks if a range is
valid and located in the desired memory region.
xe_svm_range_migrate_to_smem() checks if range have pages in devmem and
migrate them to smem.
v2
- Fix function stub in xe_svm.h
- Fix doc
v3 (Matthew Brost)
- Remove extra new line
- s/range->base.flags.has_devmem_pages/xe_svm_range_in_vram
v4 (Matthew Brost)
- s/xe_svm_range_in_vram/range->base.flags.has_devmem_pages
- Move eviction logic to separate function
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-12-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
xe_svm_range_needs_migrate_to_vram() determines whether range needs
migration to vram or not, modify it to accept region preference parameter
too, so we can use it in prefetch too.
v2
- add assert instead of warn (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-11-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Define xe_svm_range_find_or_insert function wrapping
drm_gpusvm_range_find_or_insert for reusing in prefetch.
Define xe_svm_range_get_pages function wrapping
drm_gpusvm_range_get_pages for reusing in prefetch.
-v2 pass pagefault defined drm_gpu_svm context as parameter
in xe_svm_range_find_or_insert(Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-10-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
This update renames the lookup_vma function to xe_vm_find_vma_by_addr and
makes it accessible externally. The function, which looks up a VMA by
its address within a specified VM, will be utilized in upcoming patches.
v2
- Fix doc
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-9-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Add a flag in xe_vma_ops to determine whether it has svm prefetch ops or
not.
v2:
- s/false/0 (Matthew Brost)
v3:
- s/XE_VMA_OPS_HAS_SVM_PREFETCH/XE_VMA_OPS_FLAG_HAS_SVM_PREFETCH
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-8-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Prefetch for SVM ranges can have more than one operation to increment,
hence modify the function to accept an increment value as input.
v2:
- Call xe_vma_ops_incr_pt_update_ops only once for REMAP (Matthew Brost)
- Add check for 0 ops
v3:
- s/u8/int for inc_val and num_remap_ops (Matthew Brost)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-7-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
These functions will be used in prefetch too, therefore make them public.
v2
- Fix kernel doc
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-6-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
The to_xe_range function will be used in other files. Therefore, make it
public and add kernel-doc documentation
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-5-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Introduce a helper to add tile mask of binding present and invalidated
for the range. Add a lockdep_assert to ensure it is protected by GPU SVM
notifier lock.
-v7
rebased
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-4-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
This function will be used in prefetch too, hence make it public.
v2:
- Add kernel-doc (Matthew Brost)
- Rebase
v3:
- Move CONFIG_DRM_XE_DEVMEM_MIRROR stub out to xe_svm.c (Matthew Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-3-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Add xe_vma_op_prefetch_range struct for svm ranges prefetching, including
an xarray of SVM range pointers, range count, and target memory region.
-v2: Fix doc
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250513040228.470682-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Fix a potential deadlock bug. Observe that in the mtk-cqdma.c
file, functions like mtk_cqdma_issue_pending() and
mtk_cqdma_free_active_desc() properly acquire the pc lock before the vc
lock when handling pc and vc fields. However, mtk_cqdma_tx_status()
violates this order by first acquiring the vc lock before invoking
mtk_cqdma_find_active_desc(), which subsequently takes the pc lock. This
reversed locking sequence (vc → pc) contradicts the established
pc → vc order and creates deadlock risks.
Fix the issue by moving the vc lock acquisition code from
mtk_cqdma_find_active_desc() to mtk_cqdma_tx_status(). Ensure the pc lock
is acquired before the vc lock in the calling function to maintain correct
locking hierarchy. Note that since mtk_cqdma_find_active_desc() is a
static function with only one caller (mtk_cqdma_tx_status()), this
modification safely eliminates the deadlock possibility without affecting
other components.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency bugs
including deadlocks, data races and atomicity violations.
Fixes: b1f01e48df ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250508073634.3719-1-chenqiuji666@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The fix to block access from different address space did not return a
correct value for ->poll() change. kernel test bot reported that a
return value of type __poll_t is expected rather than int. Fix to return
POLLNVAL to indicate invalid request.
Fixes: 8dfa57aabf ("dmaengine: idxd: Fix allowing write() from different address spaces")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505081851.rwD7jVxg-lkp@intel.com/
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250508170548.2747425-1-dave.jiang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running IDXD workloads in a container with the /dev directory mounted can
trigger a call trace or even a kernel panic when the parent process of the
container is terminated.
This issue occurs because, under certain configurations, Docker does not
properly propagate the mount replica back to the original mount point.
In this case, when the user driver detaches, the WQ is destroyed but it
still calls destroy_workqueue() attempting to completes all pending work.
It's necessary to check wq->wq and skip the drain if it no longer exists.
Signed-off-by: Yi Sun <yi.sun@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Link: https://lore.kernel.org/r/20250509000304.1402863-1-yi.sun@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Coalesce the direction bits from the enabled TX and/or RX channels into
the directions bit mask of dma_device. Without this mask set,
dma_get_slave_caps() in the DMAEngine fails, which prevents the driver
from being used with an IIO DMAEngine buffer.
Signed-off-by: Thomas Gessler <thomas.gessler@brueckmann-gmbh.de>
Reviewed-by: Suraj Gupta <suraj.gupta2@amd.com>
Tested-by: Folker Schwesinger <dev@folker-schwesinger.de>
Link: https://lore.kernel.org/r/20250507182101.909010-1-thomas.gessler@brueckmann-gmbh.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable the missing configs to get all devices on the MediaTek Genio
1200, 700, 510 and 350 EVK boards probing, as indicated by the DT
kselftest.
This includes support for:
Genio 1200/700/510/350:
* MT6359/MT6357 PMICs Auxiliary ADC
Genio 1200/700/510:
* MDP3 (video scaling and color space conversion IP block)
* ITE IT5205 Type-C USB Alternate Mode Passive MUX
* Himax HX8279 controller based KD070FHFID078 DSI panel
Genio 700/510:
* Richtek RT1715 USB Type-C PD Controller
Genio 1200:
* MediaTek PCIe PHY
* Mediatek MT6360 USB Type-C Port Controller
Genio 350:
* STARTEK KD070FHFID015 DSI panel
* MediaTek UART DMA controller (APDMA)
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250513-genio-defconfig-v1-1-c3862f91b6b2@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The mediatek display driver fails to probe on mt8173-elm-hana and
mt8183-kukui-jacuzzi-juniper-sku16 in v6.14-rc4 due to missing PHY
configurations.
Commit 924d66011f ("drm/mediatek: stop selecting foreign drivers")
stopped selecting the MediaTek PHY drivers, requiring them to be
explicitly enabled in defconfig.
Enable the following PHY drivers for MediaTek platforms:
CONFIG_PHY_MTK_HDMI=m for HDMI display
CONFIG_PHY_MTK_MIPI_DSI=m for DSI display
CONFIG_PHY_MTK_DP=m for DP display
Fixes: 924d66011f ("drm/mediatek: stop selecting foreign drivers")
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Link: https://lore.kernel.org/r/20250512131933.1247830-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add Tegra264 ADMA support with following changes:
- Add soc_data for Tegra264-specific variations.
- Tegra264 supports 64 channels and 10 pages, hence update the global
page configuration.
- In Tegra264 FIFO and outstanding request configs are moved to global
registers, hence add those registers offset in adma channel struct.
Also, 'has_outstanding_reqs' is removed and configuration moved to the
SoC data.
- Update channel direction and mode bit positions as per Tegra264.
- Register offsets are updated to align with Tegra264.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://lore.kernel.org/r/20250512050010.1025259-3-sheetal@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The HDMA IP supports the HDMA_NATIVE map format as part of Vendor-Specific
Extended Capability. Added the check for HDMA_NATIVE map format.
The check for map format enables the IP specific function invocation
during the DMA ops.
Signed-off-by: Devendra K Verma <devverma@amd.com>
Link: https://lore.kernel.org/r/20250513070314.577823-1-devverma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The idxd_cleanup() helper cleans up perfmon, interrupts, internals and
so on. Refactor remove call with the idxd_cleanup() helper to avoid code
duplication. Note, this also fixes the missing put_device() for idxd
groups, enginces and wqs.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-10-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The remove call stack is missing idxd cleanup to free bitmap, ida and
the idxd_device. Call idxd_free() helper routines to make sure we exit
gracefully.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-9-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memory allocated for idxd is not freed if an error occurs during
idxd_pci_probe(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-8-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error.
Fixes: a8563a33a5 ("dmanegine: idxd: reformat opcap output to match bitmap_parse() input")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-7-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The idxd_cleanup_internals() function only decreases the reference count
of groups, engines, and wqs but is missing the step to release memory
resources.
To fix this, use the cleanup helper to properly release the memory
resources.
Fixes: ddf742d4f3 ("dmaengine: idxd: Add missing cleanup for early error out in probe call")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-6-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The idxd_setup_internals() is missing some cleanup when things fail in
the middle.
Add the appropriate cleanup routines:
- cleanup groups
- cleanup enginces
- cleanup wqs
to make sure it exits gracefully.
Fixes: defe49f960 ("dmaengine: idxd: fix group conf_dev lifetime")
Cc: stable@vger.kernel.org
Suggested-by: Fenghua Yu <fenghuay@nvidia.com>
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250404120217.48772-5-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memory allocated for groups is not freed if an error occurs during
idxd_setup_groups(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: defe49f960 ("dmaengine: idxd: fix group conf_dev lifetime")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-4-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memory allocated for engines is not freed if an error occurs during
idxd_setup_engines(). To fix it, free the allocated memory in the
reverse order of allocation before exiting the function in case of an
error.
Fixes: 75b9113090 ("dmaengine: idxd: fix engine conf_dev lifetime")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-3-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Memory allocated for wqs is not freed if an error occurs during
idxd_setup_wqs(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: 7c5dd23e57 ("dmaengine: idxd: fix wq conf_dev 'struct device' lifetime")
Fixes: 700af3a0a2 ("dmaengine: idxd: add 'struct idxd_dev' as wrapper for conf_dev")
Fixes: de5819b994 ("dmaengine: idxd: track enabled workqueues in bitmap")
Fixes: b0325aefd3 ("dmaengine: idxd: add WQ operation cap restriction support")
Cc: stable@vger.kernel.org
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Link: https://lore.kernel.org/r/20250404120217.48772-2-xueshuai@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This function doesn't take the AIL lock, but should be called
with AIL lock held. Also (hopefuly) simplify the comment.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
It doesn't return anything.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Bug: When we compile the kernel with CONFIG_XFS_SUPPORT_V4=y,
remount with "-o remount,noattr2" on a v5 XFS does not
fail explicitly.
Reproduction:
mkfs.xfs -f /dev/loop0
mount /dev/loop0 /mnt/scratch
mount -o remount,noattr2 /dev/loop0 /mnt/scratch
However, with CONFIG_XFS_SUPPORT_V4=n, the remount
correctly fails explicitly. This is because the way the
following 2 functions are defined:
static inline bool xfs_has_attr2 (struct xfs_mount *mp)
{
return !IS_ENABLED(CONFIG_XFS_SUPPORT_V4) ||
(mp->m_features & XFS_FEAT_ATTR2);
}
static inline bool xfs_has_noattr2 (const struct xfs_mount *mp)
{
return mp->m_features & XFS_FEAT_NOATTR2;
}
xfs_has_attr2() returns true when CONFIG_XFS_SUPPORT_V4=n
and hence, the following if condition in
xfs_fs_validate_params() succeeds and returns -EINVAL:
/*
* We have not read the superblock at this point, so only the attr2
* mount option can set the attr2 feature by this stage.
*/
if (xfs_has_attr2(mp) && xfs_has_noattr2(mp)) {
xfs_warn(mp, "attr2 and noattr2 cannot both be specified.");
return -EINVAL;
}
With CONFIG_XFS_SUPPORT_V4=y, xfs_has_attr2() always return
false and hence no error is returned.
Fix: Check if the existing mount has crc enabled(i.e, of
type v5 and has attr2 enabled) and the
remount has noattr2, if yes, return -EINVAL.
I have tested xfs/{189,539} in fstests with v4
and v5 XFS with both CONFIG_XFS_SUPPORT_V4=y/n and
they both behave as expected.
This patch also fixes remount from noattr2 -> attr2 (on a v4 xfs).
Related discussion in [1]
[1] https://lore.kernel.org/all/Z65o6nWxT00MaUrW@dread.disaster.area/
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_zone_gc_write_chunk writes out the data buffer read in earlier using
the same bio, and currenly looks at bv_offset for the offset into the
scratch folio for that. But commit 26064d3e2b ("block: fix adding
folio to bio") changed how bv_page and bv_offset are calculated for
adding larger folios, breaking this fragile logic.
Switch to extracting the full physical address from the old bio_vec,
and calculate the offset into the folio from that instead.
This fixes data corruption during garbage collection with heavy rockdsb
workloads. Thanks to Hans for tracking down the culprit commit during
long bisection sessions.
Fixes: 26064d3e2b ("block: fix adding folio to bio")
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Tested-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_init_percpu_counters(), memory for mp->m_free[0].count wasn't freed
in error case. Free it up in this patch.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Fixes: 712bae9663 ("xfs: generalize the freespace and reserved blocks handling")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
smp_store_mb() inserts memory barrier after storing operation.
It is different with what the comment is originally aiming so Null
pointer dereference can be happened if memory update is reordered.
Signed-off-by: Hyejeong Choi <hjeong.choi@samsung.com>
Fixes: a590d0fdba ("dma-buf: Update reservation shared_count after adding the new fence")
CC: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250513020638.GA2329653@au1-maretx-p37.eng.sarc.samsung.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The first namespace configured in a subsystem sets the subsystem's
atomic write size based on its AWUPF or NAWUPF. Subsequent namespaces
must have an atomic write size (per their AWUPF or NAWUPF) less than or
equal to the subsystem's atomic write size, or their probing will be
rejected.
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
[hch: fold in review comments from John Garry]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
On AMD SoC platforms with an ACP2x gpu ip block (such as stoneyridge),
the amdgpu driver will create several platform devices for the ACP ASoC
driver to communicate with the ACP hardware block on the gpu. These
platform devices include dma for audio and one or multiple i2s
interfaces. The amdgpu driver has always created these platform devices
with automatic ids. The ASoC machine drives hardcode the platform device
name. This creates an issue where if the ACP platform devices are not
the first to be created, the ids can be different to what the machine
drivers expect, causing them to not find the ACP platform devices and
failing to load. Switch to using static ids for these ACP platform
devices so that the names never change.
Depends on patch: drm/amdgpu: use static ids for ACP platform devs [1]
[1] https://lore.kernel.org/all/20250325210517.2097188-1-bradynorander@gmail.com/
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Link: https://patch.msgid.link/20250330130844.37870-2-bradynorander@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not everything requires locking in there, which is why the 'has_lock'
variable exists. But enough does that it's a bit unwieldy to manage.
Wrap the whole thing in a ->uring_lock trylock, and just return
with no output if we fail to grab it. The existing trylock() will
already have greatly diminished utility/output for the failure case.
This fixes an issue with reading the SQE fields, if the ring is being
actively resized at the same time.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The PTL XELPDP_PORT_CLOCK_CTL register XELPDP_DDI_CLOCK_SELECT field's
size is 5 bits vs. the earlier platforms where its size is 4 bits. Make
sure the field is read-out/programmed everywhere correctly, according to
the above.
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v6.13+
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250512142600.824347-1-imre.deak@intel.com
