Since it's not currently safe to take device_lock() in the IOMMU probe
path, that can race against really_probe() setting dev->driver before
attempting to bind. The race itself isn't so bad, since we're only
concerned with dereferencing dev->driver itself anyway, but sadly my
attempt to implement the check with minimal churn leads to a kind of
TOCTOU issue, where dev->driver becomes valid after to_fsl_mc_driver(NULL)
is already computed, and thus the check fails to work as intended.
Will and I both hit this with the platform bus, but the pattern here is
the same, so fix it for correctness too.
Reported-by: Will McVicker <willmcvicker@google.com>
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20250425133929.646493-3-robin.murphy@arm.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
In case the MC firmware runs in debug mode with extensive prints pushed
to the console, the current timeout of 500ms is not enough.
Increase the timeout value so that we don't have any chance of wrongly
assuming that the firmware is not responding when it's just taking more
time.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-7-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
This cleanup is actually a no-op because the resources are freed when
the device objects are removed from the allocator at driver remove
time. Remove the fsl_mc_cleanup_all_resource_pools() function and its
call site.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-6-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Add a new MC command to the list of accepted firmware commands.
The DPRC_GET_MEM command can be used to gather information on the
internal memory characteristics.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-5-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Command ids for taildrop get/set can not pass the check when they are
using from the restool user space utility. Correct them according to the
user manual.
Fixes: d67cc29e6d ("bus: fsl-mc: list more commands as accepted through the ioctl")
Signed-off-by: Wan Junjie <junjie.wan@inceptio.ai>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-4-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The fsl-mc bus associated to the root DPRC in a DPAA2 system exports a
device file for userspace access to the MC firmware. In case the DPRC's
local MC portal (DPMCP) is currently in use, a new DPMCP device is
allocated through the fsl_mc_portal_allocate() function.
In this case, the call to fsl_mc_portal_allocate() will fail with -EINVAL
when trying to add a device link between the root DPRC (consumer) and
the newly allocated DPMCP device (supplier). This is because the DPMCP
is a dependent of the DPRC device (the bus).
Fix this by not adding a device link in case the DPMCP is allocated for
the root DPRC's usage.
Fixes: afb7742281 ("bus: fsl-mc: automatically add a device_link on fsl_mc_[portal,object]_allocate")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250408105814.2837951-3-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
The blamed commit tried to simplify how the deallocations are done but,
in the process, introduced a double-free on the mc_dev variable.
In case the MC device is a DPRC, a new mc_bus is allocated and the
mc_dev variable is just a reference to one of its fields. In this
circumstance, on the error path only the mc_bus should be freed.
This commit introduces back the following checkpatch warning which is a
false-positive.
WARNING: kfree(NULL) is safe and this check is probably not required
+ if (mc_bus)
+ kfree(mc_bus);
Fixes: a042fbed02 ("staging: fsl-mc: simplify couple of deallocations")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250408105814.2837951-2-ioana.ciornei@nxp.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Enabling the compile test should not cause automatic enabling of such
drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250404112407.255126-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
- Add support for the RZ/V2N (R9A09G056) Soc.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCaB4HugAKCRCKwlD9ZEnx
cEtPAP9cIjbwqTuO10trGm6lOhyQUQpgCMb9xjQXgT6lLVtn3wD+Jlf/N97aGDdw
u2v3w+YP5/bcSxQvOSRRHIZVZAhHcw0=
=a6Y8
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.16
- Add support for the RZ/V2N (R9A09G056) Soc.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Return value of the validate_nla() function can be propagated all the
way up to users of libbpf API. In case of error this libbpf version
of validate_nla returns -1 which will be seen as -EPERM from user's
point of view. Instead, return a more reasonable -EINVAL.
Fixes: bbf48c18ee ("libbpf: add error reporting in XDP")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510182011.2246631-1-a.s.protopopov@gmail.com
Currently rst2man is required to build bpf selftests, as the tool is
used by Makefile.docs. rst2man may be missing in some build
environments and is not essential for selftests. It makes sense to
allow user to skip building docs.
This patch adds SKIP_DOCS variable into bpf selftests Makefile that when
set to 1 allows skipping building docs, for example:
make -C tools/testing/selftests TARGETS=bpf SKIP_DOCS=1
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510002450.365613-1-mykyta.yatsenko5@gmail.com
Context Timestamp (CTX_TIMESTAMP) in the LRC accumulates the run ticks
of the context, but only gets updated when the context switches out. In
order to check how long a context has been active before it switches
out, two things are required:
(1) Determine if the context is running:
To do so, we program the WA BB to set an initial value for CTX_TIMESTAMP
in the LRC. The value chosen is 1 since 0 is the initial value when the
LRC is initialized. During a query, we just check for this value to
determine if the context is active. If the context switched out, it
would overwrite this location with the actual CTX_TIMESTAMP MMIO value.
Note that WA BB runs as the last part of the context restore, so reusing
this LRC location will not clobber anything.
(2) Calculate the time that the context has been active for:
The CTX_TIMESTAMP ticks only when the context is active. If a context is
active, we just use the CTX_TIMESTAMP MMIO as the new value of
utilization. While doing so, we need to read the CTX_TIMESTAMP MMIO
for the specific engine instance. Since we do not know which instance
the context is running on until it is scheduled, we also read the
ENGINE_ID MMIO in the WA BB and store it in the PPHSWP.
Using the above 2 instructions in a WA BB, capture active context
utilization.
v2: (Matt Brost)
- This breaks TDR, fix it by saving the CTX_TIMESTAMP register
"drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value"
- Drop tile from LRC if using gt
"drm/xe: Save the gt pointer in LRC and drop the tile"
v3:
- Remove helpers for bb_per_ctx_ptr (Matt)
- Add define for context active value (Matt)
- Use 64 bit CTX TIMESTAMP for platforms that support it. For platforms
that don't, live with the rare race. (Matt, Lucas)
- Convert engine id to hwe and get the MMIO value (Lucas)
- Correct commit message on when WA BB runs (Lucas)
v4:
- s/GRAPHICS_VER(...)/xe->info.has_64bit_timestamp/ (Matt)
- Drop support for active utilization on a VF (CI failure)
- In xe_lrc_init ensure the lrc value is 0 to begin with (CI regression)
v5:
- Minor checkpatch fix
- Squash into previous commit and make TDR use 32-bit time
- Update code comment to match commit msg
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4532
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-8-umesh.nerlige.ramappa@intel.com
Save the gt pointer in the lrc so that it can used for gt based helpers.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-7-umesh.nerlige.ramappa@intel.com
For determining actual job execution time, save the current value of the
CTX_TIMESTAMP register rather than the value saved in LRC since the
current register value is the closest to the start time of the job.
v2: Define MI_STORE_REGISTER_MEM to fix compile error
v3: Place MI_STORE_REGISTER_MEM sorted by MI_INSTR (Lucas)
Fixes: 65921374c4 ("drm/xe: Emit ctx timestamp copy in ring ops")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-6-umesh.nerlige.ramappa@intel.com
Add support for LLCC V6. V6 adds several additional usecase IDs,
rearrages several registers and offsets, and supports slice IDs
over 31, so add a new function for programming LLCC V6.
Signed-off-by: Melody Olvera <melody.olvera@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250512-sm8750_llcc_master-v5-2-d78dca6282a5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add some informal control for atomic SVM fault GPU timeslice to be able
to play around with values and tweak performance.
v2:
- Reduce timeslice default value to 5ms
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-6-matthew.brost@intel.com
Ensure GPU can make forward progress on an atomic SVM GPU fault by
giving the GPU a timeslice of 5ms
v2:
- Reduce timeslice to 5ms
- Double timeslice on retry
- Split out GPU SVM changes into independent patch
v5:
- Double timeslice in a few more places
Fixes: 2f118c9491 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-5-matthew.brost@intel.com
Add timeslicing support to GPU SVM which will guarantee the GPU a
minimum execution time on piece of physical memory before migration back
to CPU. Intended to implement strict migration policies which require
memory to be in a certain placement for correct execution.
Required for shared CPU and GPU atomics on certain devices.
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-4-matthew.brost@intel.com
Mixing GPU and CPU atomics does not work unless a strict migration
policy of GPU atomics must be device memory. Enforce a policy of must be
in VRAM with a retry loop of 3 attempts, if retry loop fails abort
fault.
Removing always_migrate_to_vram modparam as we now have real migration
policy.
v2:
- Only retry migration on atomics
- Drop alway migrate modparam
v3:
- Only set vram_only on DGFX (Himal)
- Bail on get_pages failure if vram_only and retry count exceeded (Himal)
- s/vram_only/devmem_only
- Update xe_svm_range_is_valid to accept devmem_only argument
v4:
- Fix logic bug get_pages failure
v5:
- Fix commit message (Himal)
- Mention removing always_migrate_to_vram in commit message (Lucas)
- Fix xe_svm_range_is_valid to check for devmem pages
- Bail on devmem_only && !migrate_devmem (Thomas)
v6:
- Add READ_ONCE barriers for opportunistic checks (Thomas)
- Pair READ_ONCE with WRITE_ONCE (Thomas)
v7:
- Adjust comments (Thomas)
Fixes: 2f118c9491 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-3-matthew.brost@intel.com
This commit adds a new flag, devmem_only, to the drm_gpusvm structure. The
purpose of this flag is to ensure that the get_pages function allocates
memory exclusively from the device's memory. If the allocation from
device memory fails, the function will return an -EFAULT error.
Required for shared CPU and GPU atomics on certain devices.
v3:
- s/vram_only/devmem_only/
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-2-matthew.brost@intel.com
Add Wa_22021007897 for the Xe2_HPG (graphics version: 20.01) IP. It is
a permanent workaround, and applicable on all the steppings.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com>
Link: https://lore.kernel.org/r/20250512065004.2576-1-aradhya.bhatia@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
The Btrfs documentation states that if the commit value is greater than
300 a warning should be issued. The warning was accidentally lost in the
new mount API update.
Fixes: 6941823cc8 ("btrfs: remove old mount API code")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs_reserve_extent() fails while submitting an async_extent for a
compressed write, then we fail to call free_async_extent_pages() on the
async_extent and leak its folios. A likely cause for such a failure
would be btrfs_reserve_extent() failing to find a large enough
contiguous free extent for the compressed extent.
I was able to reproduce this by:
1. mount with compress-force=zstd:3
2. fallocating most of a filesystem to a big file
3. fragmenting the remaining free space
4. trying to copy in a file which zstd would generate large compressed
extents for (vmlinux worked well for this)
Step 4. hits the memory leak and can be repeated ad nauseam to
eventually exhaust the system memory.
Fix this by detecting the case where we fallback to uncompressed
submission for a compressed async_extent and ensuring that we call
free_async_extent_pages().
Fixes: 131a821a24 ("btrfs: fallback if compressed IO fails for ENOSPC")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Co-developed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the discard worker is running and there's currently only one block
group, that block group is a data block group, it's in the unused block
groups discard list and is being used (it got an extent allocated from it
after becoming unused), the worker can end up in an infinite loop if a
transaction abort happens or the async discard is disabled (during remount
or unmount for example).
This happens like this:
1) Task A, the discard worker, is at peek_discard_list() and
find_next_block_group() returns block group X;
2) Block group X is in the unused block groups discard list (its discard
index is BTRFS_DISCARD_INDEX_UNUSED) since at some point in the past
it become an unused block group and was added to that list, but then
later it got an extent allocated from it, so its ->used counter is not
zero anymore;
3) The current transaction is aborted by task B and we end up at
__btrfs_handle_fs_error() in the transaction abort path, where we call
btrfs_discard_stop(), which clears BTRFS_FS_DISCARD_RUNNING from
fs_info, and then at __btrfs_handle_fs_error() we set the fs to RO mode
(setting SB_RDONLY in the super block's s_flags field);
4) Task A calls __add_to_discard_list() with the goal of moving the block
group from the unused block groups discard list into another discard
list, but at __add_to_discard_list() we end up doing nothing because
btrfs_run_discard_work() returns false, since the super block has
SB_RDONLY set in its flags and BTRFS_FS_DISCARD_RUNNING is not set
anymore in fs_info->flags. So block group X remains in the unused block
groups discard list;
5) Task A then does a goto into the 'again' label, calls
find_next_block_group() again we gets block group X again. Then it
repeats the previous steps over and over since there are not other
block groups in the discard lists and block group X is never moved
out of the unused block groups discard list since
btrfs_run_discard_work() keeps returning false and therefore
__add_to_discard_list() doesn't move block group X out of that discard
list.
When this happens we can get a soft lockup report like this:
[71.957] watchdog: BUG: soft lockup - CPU#0 stuck for 27s! [kworker/u4:3:97]
[71.957] Modules linked in: xfs af_packet rfkill (...)
[71.957] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.957] Tainted: [W]=WARN
[71.957] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.957] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.957] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[71.957] Code: c1 01 48 83 (...)
[71.957] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[71.957] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[71.957] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[71.957] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[71.957] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[71.957] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[71.957] FS: 0000000000000000(0000) GS:ffff89707bc00000(0000) knlGS:0000000000000000
[71.957] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[71.957] CR2: 00005605bcc8d2f0 CR3: 000000010376a001 CR4: 0000000000770ef0
[71.957] PKRU: 55555554
[71.957] Call Trace:
[71.957] <TASK>
[71.957] process_one_work+0x17e/0x330
[71.957] worker_thread+0x2ce/0x3f0
[71.957] ? __pfx_worker_thread+0x10/0x10
[71.957] kthread+0xef/0x220
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork+0x34/0x50
[71.957] ? __pfx_kthread+0x10/0x10
[71.957] ret_from_fork_asm+0x1a/0x30
[71.957] </TASK>
[71.957] Kernel panic - not syncing: softlockup: hung tasks
[71.987] CPU: 0 UID: 0 PID: 97 Comm: kworker/u4:3 Tainted: G W L 6.14.2-1-default #1 openSUSE Tumbleweed 968795ef2b1407352128b466fe887416c33af6fa
[71.989] Tainted: [W]=WARN, [L]=SOFTLOCKUP
[71.989] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[71.991] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs]
[71.992] Call Trace:
[71.993] <IRQ>
[71.994] dump_stack_lvl+0x5a/0x80
[71.994] panic+0x10b/0x2da
[71.995] watchdog_timer_fn.cold+0x9a/0xa1
[71.996] ? __pfx_watchdog_timer_fn+0x10/0x10
[71.997] __hrtimer_run_queues+0x132/0x2a0
[71.997] hrtimer_interrupt+0xff/0x230
[71.998] __sysvec_apic_timer_interrupt+0x55/0x100
[71.999] sysvec_apic_timer_interrupt+0x6c/0x90
[72.000] </IRQ>
[72.000] <TASK>
[72.001] asm_sysvec_apic_timer_interrupt+0x1a/0x20
[72.002] RIP: 0010:btrfs_discard_workfn+0xc4/0x400 [btrfs]
[72.002] Code: c1 01 48 83 (...)
[72.005] RSP: 0018:ffffafaec03efe08 EFLAGS: 00000246
[72.006] RAX: ffff897045500000 RBX: ffff8970413ed8d0 RCX: 0000000000000000
[72.006] RDX: 0000000000000001 RSI: ffff8970413ed8d0 RDI: 0000000a8f1272ad
[72.007] RBP: 0000000a9d61c60e R08: ffff897045500140 R09: 8080808080808080
[72.008] R10: ffff897040276800 R11: fefefefefefefeff R12: ffff8970413ed860
[72.009] R13: ffff897045500000 R14: ffff8970413ed868 R15: 0000000000000000
[72.010] ? btrfs_discard_workfn+0x51/0x400 [btrfs 23b01089228eb964071fb7ca156eee8cd3bf996f]
[72.011] process_one_work+0x17e/0x330
[72.012] worker_thread+0x2ce/0x3f0
[72.013] ? __pfx_worker_thread+0x10/0x10
[72.014] kthread+0xef/0x220
[72.014] ? __pfx_kthread+0x10/0x10
[72.015] ret_from_fork+0x34/0x50
[72.015] ? __pfx_kthread+0x10/0x10
[72.016] ret_from_fork_asm+0x1a/0x30
[72.017] </TASK>
[72.017] Kernel Offset: 0x15000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[72.019] Rebooting in 90 seconds..
So fix this by making sure we move a block group out of the unused block
groups discard list when calling __add_to_discard_list().
Fixes: 2bee7eb8bb ("btrfs: discard one region at a time in async discard")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1242012
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add the initial nova-drm driver skeleton.
nova-drm is connected to nova-core through the auxiliary bus and
implements the DRM parts of the nova driver stack.
For now, it implements the fundamental DRM abstractions, i.e. creates a
DRM device and registers it, exposing a three sample IOCTLs.
DRM_IOCTL_NOVA_GETPARAM
- provides the PCI bar size from the bar that maps the GPUs VRAM
from nova-core
DRM_IOCTL_NOVA_GEM_CREATE
- creates a new dummy DRM GEM object and returns a handle
DRM_IOCTL_NOVA_GEM_INFO
- provides metadata for the DRM GEM object behind a given handle
I implemented a small userspace test suite [1] that utilizes this
interface.
Link: https://gitlab.freedesktop.org/dakr/drm-test [1]
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250424160452.8070-3-dakr@kernel.org
[ Kconfig: depend on DRM=y rather than just DRM. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Register an auxiliary device for nova-drm.
For now always use zero for the auxiliary device's ID; we don't use it
yet anyways. However, once it lands, we should switch to XArray.
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/r/20250424160452.8070-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
On continuous testing the perf script output can be empty, or nearly
empty, causing tr/grep to exit and due to "set -e" the test traps and
fails.
Add some empty file handling that sets the test to skip and make grep
and other text rewriting failures non-fatal by adding "|| true".
Committer testing:
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf test "Check branch stack sampling"
104: Check branch stack sampling : Ok
root@number:~#
root@number:~# perf test -vvvvvvv "Check branch stack sampling"
104: Check branch stack sampling:
--- start ---
test child forked, pid 396047
142d22-142da0 l brstack_bench
perf does have symbol 'brstack_bench'
Testing user branch stack sampling
Testing branch stack filtering permutation (any_call,CALL|IND_CALL|COND_CALL|SYSCALL|IRQ)
Testing branch stack filtering permutation (call,CALL|SYSCALL)
Testing branch stack filtering permutation (cond,COND)
Testing branch stack filtering permutation (any_ret,RET|COND_RET|SYSRET|ERET)
Testing branch stack filtering permutation (call,cond,CALL|SYSCALL|COND)
Testing branch stack filtering permutation (any_call,cond,CALL|IND_CALL|COND_CALL|IRQ|SYSCALL|COND)
Testing branch stack filtering permutation (cond,any_call,any_ret,COND|CALL|IND_CALL|COND_CALL|SYSCALL|IRQ|RET|COND_RET|SYSRET|ERET)
---- end(0) ----
104: Check branch stack sampling : Ok
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250318161639.34446-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The FVP Rev C model includes CoreSight ETE and TRBE support. These
features can be enabled by specifying parameters when launching the
model:
| -C cluster0.has_ete: 1
| -C cluster1.has_ete: 1
| -C cluster0.has_trbe: 1
| -C cluster1.has_trbe: 1
This change adds device tree nodes for the ETE and TRBE. They are
disabled by default to prevent kernel warnings from failed driver
probes, as the model does not enable the features unless explicitly
specified as mentioned above.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Message-Id: <20250512151149.13111-1-leo.yan@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Drop the clock-frequency property from the timer nodes, since it must be
configured by the boot/secure firmware.
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Message-Id: <20250512101132.1743920-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reserve 64MB of memory at the end of the first bank of DRAM on FVP model.
This is mainly for FF-A firmware use, as required by various firmware
configurations using the Firmware Framework for Arm (FF-A). This prevents
the kernel from overwriting the firmware region.
This is also useful when running other firmware configurations(non FF-A
based) that rely on usage of 64MB at the end of first DRAM bank.
Necessary for proper coexistence of firmware(FF-A partitions) and the OS.
Message-Id: <20250509154640.836093-3-sudeep.holla@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add CPU idle state definitions to the FVP Rev C device tree to enable
support for CPU lower power modes. This allows the system to properly
enter low power states during idle. It is disabled by default as it is
know to impact performance on the models.
Note that the power_state parameter(arm,psci-suspend-param) doesn't use
the Extended StateID format for compatibility reasons on FVP.
Tested on the FVP Rev C model with PSCI support enabled firmware.
Tested-by: Leo Yan <leo.yan@arm.com>
Message-Id: <20250509154640.836093-2-sudeep.holla@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Introduce a system-level timer node in the FVP device tree to act as
a broadcast timer when CPUs are in context losing idle states where
the local timer stops on entering such low power states.
This change complements recent CPU idle state additions.
Tested-by: Leo Yan <leo.yan@arm.com>
Message-Id: <20250509154640.836093-1-sudeep.holla@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes and new HW support
- amd/pmc: Use spurious 8042 quirk with MECHREVO Wujie 14XA
- amd/pmf:
- Ensure Smart PC policies are valid
- Fix memory leak when the engine fails to start
- amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
- asus-wmi: Fix wlan_ctrl_by_user detection
- thinkpad_acpi: Add support for NEC Lavie X1475JAS
The following is an automated shortlog grouped by driver:
amd/hsmp:
- Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
amd/pmc:
- Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL)
asus-wmi:
- Fix wlan_ctrl_by_user detection
drivers/platform/x86/amd: pmf:
- Check for invalid sideloaded Smart PC Policies
- Check for invalid Smart PC Policies
thinkpad_acpi:
- Support also NEC Lavie X1475JAS
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaCHXwQAKCRBZrE9hU+XO
MY1IAQD073B3tYejifz5U6PN/Pn+U9bf/Ij9cGPljYxQ7P1dAwD+KxEPupds8pkm
IUmcKjEATGh/AjHrWYzYYc68UzCoSgE=
=YAdo
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
- amd/pmc: Use spurious 8042 quirk with MECHREVO Wujie 14XA
- amd/pmf:
- Ensure Smart PC policies are valid
- Fix memory leak when the engine fails to start
- amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
- asus-wmi: Fix wlan_ctrl_by_user detection
- thinkpad_acpi: Add support for NEC Lavie X1475JAS
* tag 'platform-drivers-x86-v6.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix wlan_ctrl_by_user detection
platform/x86/amd/pmc: Declare quirk_spurious_8042 for MECHREVO Wujie 14XA (GX4HRXL)
platform/x86: thinkpad_acpi: Support also NEC Lavie X1475JAS
platform/x86/amd/hsmp: Make amd_hsmp and hsmp_acpi as mutually exclusive drivers
drivers/platform/x86/amd: pmf: Check for invalid Smart PC Policies
drivers/platform/x86/amd: pmf: Check for invalid sideloaded Smart PC Policies
Gregory Bell says:
====================
Fix verifier test failures in verbose mode
This patch series fixes two issues that cause false failures in the
BPF verifier test suite when run with verbose output (`-v`).
The following tests fail only when running the test_verifier in
verbose.
This leads to inconsistent results across verbose and
non-verbose runs.
Patch 1 addresses an issue where the verbose flag (`-v`) unintentionally
overrides the `opts.log_level`, leading to incorrect contents when checking
bpf_vlog in tests with `expected_ret == VERBOSE_ACCEPT`. This occurs when
running verbose with `-v` but not `-vv`
Patch 2 increases the size of the `bpf_vlog[]` buffer to prevent truncation
of large verifier logs, which was causing failures in several scale and
64-bit immediate tests.
Before patches:
./test_verifier | grep FAIL
Summary: 790 PASSED, 0 SKIPPED, 0 FAILED
./test_verifier -v | grep FAIL
Summary: 782 PASSED, 0 SKIPPED, 8 FAILED
./test_verifier -vv | grep FAIL
Summary: 787 PASSED, 0 SKIPPED, 3 FAILED
After patches:
./test_verifier -v | grep FAIL
Summary: 790 PASSED, 0 SKIPPED, 0 FAILED
./test_verifier -vv | grep FAIL
Summary: 790 PASSED, 0 SKIPPED, 0 FAILED
These fixes improve test reliability and ensure consistent behavior across
verbose and non-verbose runs.
====================
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/cover.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tests:
- 458/p ld_dw: xor semi-random 64-bit imms, test 5
- 501/p scale: scale test 1
- 502/p scale: scale test 2
fail in verbose mode due to bpf_vlog[] overflowing. These tests
generate large verifier logs that exceed the current buffer size,
causing them to fail to load.
Increase the size of the bpf_vlog[] buffer to accommodate larger
logs and prevent false failures during test runs with verbose output.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/e49267100f07f099a5877a3a5fc797b702bbaf0c.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_verifier with the -v flag and a test with
`expected_ret==VERBOSE_ACCEPT`, the opts.log_level is unintentionally
overwritten because the verbose flag takes precedence. This leads to
a mismatch in the expected and actual contents of bpf_vlog, causing
tests to fail incorrectly.
Reorder the conditional logic that sets opts.log_level to preserve
the expected log level and prevent it from being overridden by -v.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/182bf00474f817c99f968a9edb119882f62be0f8.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmgiIbAACgkQnJ2qBz9k
QNlbuQf+K3r9pPtR2IOfeWj5lJtY0ZYjd51qazTZ48OdGsSnjU9raKsWChbqaSAZ
90TPK7/7QHXvebuT2akpC5ko50k6gVwGpEgFTJP1/b6SnuUelm8bKy6i4FK+hvpR
9hrdZfWCe6Nm3oCJ/4buAJVXgNDbnZYeD7dFElJ863MxyytNYyvuKaUN4tlMTDMA
9Z0N2FfOXYwRWRF7a5o9JulJh0cgdlq3w82w/ZePo7qNuVTL127ESRQpqu2/31js
f2oOeXJ2qsMGhzyvouZkCseFfbHDyg/XqVBTFpE11smqKJf6/+0Uf4RABPxvmsIU
/vy4YRXWQDRSAUj9CedYa6S/8VgNMw==
=xAt3
-----END PGP SIGNATURE-----
Merge tag 'udf_for_v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fix from Jan Kara:
"Fix a bug in UDF inode eviction leading to spewing pointless
error messages"
* tag 'udf_for_v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Make sure i_lenExtents is uptodate on inode eviction
The -C option allows the CPUs for a list of events to be specified but
its not possible to set the CPU for a single event. Add a term to
allow this. The term isn't a general CPU list due to ',' already being
a special character in event parsing instead multiple cpu= terms may
be provided and they will be merged/unioned together.
An example of mixing different types of events counted on different CPUs:
```
$ perf stat -A -C 0,4-5,8 -e "instructions/cpu=0/,l1d-misses/cpu=4,cpu=5/,inst_retired.any/cpu=8/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 6,979,225 instructions/cpu=0/ # 0.89 insn per cycle
CPU4 75,138 cpu/l1d-misses/
CPU5 1,418,939 cpu/l1d-misses/
CPU8 797,553 cpu/inst_retired.any,cpu=8/
CPU0 7,845,302 cycles
CPU4 6,546,859 cycles
CPU5 185,915,438 cycles
CPU8 2,065,668 cycles
0.112449242 seconds time elapsed
```
Committer testing:
root@number:~# grep -m1 "model name" /proc/cpuinfo
model name : AMD Ryzen 9 9950X3D 16-Core Processor
root@number:~# perf stat -A -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.1
Performance counter stats for 'system wide':
CPU0 2,398,351 instructions/cpu=0/ # 0.44 insn per cycle
CPU0 2,398,152 instructions # 0.44 insn per cycle
CPU1 1,265,634 instructions # 0.49 insn per cycle
CPU2 606,087 instructions # 0.50 insn per cycle
CPU3 4,025,752 instructions # 0.52 insn per cycle
CPU4 4,236,810 instructions # 0.53 insn per cycle
CPU5 3,984,832 instructions # 0.66 insn per cycle
CPU6 434,132 instructions # 0.44 insn per cycle
CPU7 65,752 instructions # 0.41 insn per cycle
CPU8 459,083 instructions # 0.48 insn per cycle
CPU9 6,464,161 instructions # 1.31 insn per cycle
<SNIP>
root@number:~# perf stat -e "instructions/cpu=0/,instructions,l1d-misses/cpu=4,cpu=5/,cycles" -a sleep 0.
Performance counter stats for 'system wide':
144,822 instructions/cpu=0/ # 0.03 insn per cycle
4,666,114 instructions # 0.93 insn per cycle
2,583 l1d-misses
4,993,633 cycles
0.000868512 seconds time elapsed
root@number:~#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Also set the CPU map to all online CPU maps.
This is done so the behavior of legacy hardware and hardware cache
events better matches that of sysfs and JSON events during
__perf_evlist__propagate_maps().
Fix missing cpumap put in "Synthesize attr update" test.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a counter is 0 it may or may not be skipped.
For uncore counters it is common they are only valid on 1 logical CPU
and all other CPUs should be skipped.
The PMU's cpumask was used for the skip calculation, but that cpumask
may not reflect user overrides.
Similarly a counter on a core PMU may explicitly not request a CPU be
gathered.
If the counter on this CPU's value is 0 then the counter should be
skipped as it wasn't requested.
Switch from using the PMU cpumask to that associated with the evsel to
support these cases.
Avoid potential crash with --per-thread mode where config->aggr_get_id
is NULL. Add some examples for the tool event 0 counter skipping.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_cpu_map__new_int() so that a CPU map can be created from a
single integer.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20250403194337.40202-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When permissions are limited running sleep without system wide isn't a
good benchmark to run to achieve samples, switch to running noploop.
Remove indent for non-success cases.
Allow skip for the not counted case.
Minor debug changes.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250412004704.2297939-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mrvl_ddr_pmu will return EOPNOTSUPP if opened in per-thread
mode. Give a warning for this similar to EINVAL.
Doing this better supports metric testing with limited permissions when
the mrvl_ddr_pmu is present, as the failure to open causes the test to
skip and not fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20250412004704.2297939-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The script allows the user to enter patterns to find symbols.
The pattern matching characters are converted for use in SQL.
For PostgreSQL the conversion involves using the Python maketrans()
method which is slightly different in Python 3 compared with Python 2.
Fix to work in Python 3.
Fixes: beda0e725e ("perf script python: Add Python3 support to exported-sql-viewer.py")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tony Jones <tonyj@suse.de>
Link: https://lore.kernel.org/r/20250512093932.79854-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On systems with many CPUs, recording extra context switch events can be
excessive and unnecessary. Add perf config intel-pt.all-switch-events=false
to control the behaviour.
Example:
# perf config intel-pt.all-switch-events=false
# perf record -eintel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.082 MB perf.data ]
# perf script -D | grep PERF_RECORD_SWITCH | awk '{print $5}' | uniq -c
5 PERF_RECORD_SWITCH
# perf config intel-pt.all-switch-events=true
# perf record -eintel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.102 MB perf.data ]
# perf script -D | grep PERF_RECORD_SWITCH | awk '{print $5}' | uniq -c
180 PERF_RECORD_SWITCH_CPU_WIDE
Committer testing:
While doing a make -j28 allmodconfig:
root@five:~# grep "model name" -m1 /proc/cpuinfo
model name : Intel(R) Core(TM) i7-14700K
root@five:~#
root@five:~# perf config intel-pt.all-switch-events=false
root@five:~# perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.019 MB perf.data ]
root@five:~# perf report --stats | grep SWITCH_CPU_WIDE
root@five:~#
root@five:~# perf config intel-pt.all-switch-events=true
root@five:~# perf record -e intel_pt//u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.047 MB perf.data ]
root@five:~# perf report --stats | grep SWITCH_CPU_WIDE
SWITCH_CPU_WIDE events: 542 (96.4%)
root@five:~#
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250512093932.79854-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Fixes commit did not add support for decoding PEBS-via-PT data_src.
Fix by adding support.
PEBS-via-PT is a feature of some E-core processors, starting with
processors based on Tremont microarchitecture. Because the kernel only
supports Intel PT features that are on all processors, there is no support
for PEBS-via-PT on hybrids.
Currently that leaves processors based on Tremont, Gracemont and Crestmont,
however there are no events on Tremont that produce data_src information,
and for Gracemont and Crestmont there are only:
mem-loads event=0xd0,umask=0x5,ldlat=3
mem-stores event=0xd0,umask=0x6
Affected processors include Alder Lake N (Gracemont), Sierra Forest
(Crestmont) and Grand Ridge (Crestmont).
Example:
# perf record -d -e intel_pt/branch=0/ -e mem-loads/aux-output/pp uname
Before:
# perf.before script --itrace=o -Fdata_src
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
0 |OP No|LVL N/A|SNP N/A|TLB N/A|LCK No|BLK N/A
After:
# perf script --itrace=o -Fdata_src
10268100142 |OP LOAD|LVL L1 hit|SNP None|TLB L1 or L2 hit|LCK No|BLK N/A
10450100442 |OP LOAD|LVL L2 hit|SNP None|TLB L2 miss|LCK No|BLK N/A
Fixes: 975846eddf ("perf intel-pt: Add memory information to synthesized PEBS sample")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250512093932.79854-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using trace_array_printk() on a created instance, the correct
function to use to initialize it is:
trace_array_init_printk()
Not
trace_printk_init_buffer()
The former is a proper function to use, the latter is for initializing
trace_printk() and causes the NOTICE banner to be displayed.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Divya Indi <divya.indi@oracle.com>
Link: https://lore.kernel.org/20250509152657.0f6744d9@gandalf.local.home
Fixes: 89ed42495e ("tracing: Sample module to demonstrate kernel access to Ftrace instances.")
Fixes: 38ce2a9e33 ("tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaCHSPAAKCRCRxhvAZXjc
ouxZAQCZcvUr0H7LO9j2JQdM+S7ABLU4T8El/f72tvFfapPJVgEA3zrAQ9qgZacv
ytsmniyOnIzGsamPcK8Zy6LP6KjOYQ8=
=xEE0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Ensure that simple_xattr_list() always includes security.* xattrs
- Fix eventpoll busy loop optimization when combined with timeouts
- Disable swapon() for devices with block sizes greater than page sizes
- Don't call errseq_set() twice during mark_buffer_write_io_error().
Just use mapping_set_error() which takes care to not deference
unconditionally
* tag 'vfs-6.15-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove redundant errseq_set call in mark_buffer_write_io_error.
swapfile: disable swapon for bs > ps devices
fs/eventpoll: fix endless busy loop after timeout has expired
fs/xattr.c: fix simple_xattr_list to always include security.* xattrs
