Currently, if rate limiting is disabled, ___ratelimit() does an immediate
early return with no state changes. This can result in false-positive
drops when re-enabling rate limiting. Therefore, mark the ratelimit_state
structure "uninitialized" when rate limiting is disabled.
[ paulmck: Apply Petr Mladek feedback. ]
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
If ->interval is zero, then rate-limiting will be disabled.
Alternatively, if interval is greater than zero and ->burst is zero,
then rate-limiting will be applied unconditionally. The point of this
distinction is to handle current users that pass zero-initialized
ratelimit_state structures to ___ratelimit(), and in such cases the
->lock field will be uninitialized. Acquiring ->lock in this case is
clearly not a strategy to win.
Therefore, make this classification be lockless.
Note that although negative ->interval and ->burst happen to be treated
as if they were zero, this is an accident of the current implementation.
The semantics of negative values for these fields is subject to change
without notice. Especially given that Bert Karwatzki determined that
no current calls to ___ratelimit() ever have negative values for these
fields.
This commit replaces an earlier buggy versions.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Reported-by: Bert Karwatzki <spasswolf@web.de>
Reported-by: "Aithal, Srikanth" <sraithal@amd.com>
Closes: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/257c3b91-e30f-48be-9788-d27a4445a416@sirena.org.uk/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: "Aithal, Srikanth" <sraithal@amd.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
The ___ratelimit() function special-cases the jiffies-counter value of zero
as "uninitialized". This works well on 64-bit systems, where the jiffies
counter is not going to return to zero for more than half a billion years
on systems with HZ=1000, but similar 32-bit systems take less than 50 days
to wrap the jiffies counter. And although the consequences of wrapping the
jiffies counter seem to be limited to minor confusion on the duration of
the rate-limiting interval that happens to end at time zero, it is almost
no work to avoid this confusion.
Therefore, introduce a RATELIMIT_INITIALIZED bit to the ratelimit_state
structure's ->flags field so that a ->begin value of zero is no longer
special.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
The ___ratelimit() function simply returns zero ("do ratelimiting")
if the trylock fails, but does not adjust the ->missed field. This
means that the resulting dropped printk()s are dropped silently, which
could seriously confuse people trying to do console-log-based debugging.
Therefore, increment the ->missed field upon trylock failure.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
The ratelimit_state structure's ->missed field is sometimes incremented
locklessly, and it would be good to avoid lost counts. This is also
needed to count the number of misses due to trylock failure. Therefore,
convert the ratelimit_state structure's ->missed field to atomic_t.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
The amdgpu_set_thermal_throttling_logging() function directly accesses
the ratelimit_state structure's ->missed field, which works, but which
also makes it more difficult to change this field. Therefore, make use
of the ratelimit_state_reset_interval() function instead of directly
accessing the ->missed field.
Nevertheless, open-coded use of ->burst and ->interval is still permitted,
for example, for runtime sysfs adjustment of these fields.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503180826.EiekA1MB-lkp@intel.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Xinhui Pan <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: <amd-gfx@lists.freedesktop.org>
Cc: <dri-devel@lists.freedesktop.org>
The i915_oa_stream_destroy() function directly accesses the
ratelimit_state structure's ->missed field, which works, but which also
makes it more difficult to change this field. Therefore, make use of
the ratelimit_state_get_miss() function instead of directly accessing
the ->missed field.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: <intel-gfx@lists.freedesktop.org>
Cc: <dri-devel@lists.freedesktop.org>
The _credit_init_bits() function directly accesses the ratelimit_state
structure's ->missed field, which works, but which also makes it
more difficult to change this field. Therefore, make use of the
ratelimit_state_get_miss() and ratelimit_state_inc_miss() functions
instead of directly accessing the ->missed field.
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
"Jason A. Donenfeld" <Jason@zx2c4.com>
A number of ratelimit use cases do open-coded access to the
ratelimit_state structure's ->missed field. This works, but is a bit
messy and makes it more annoying to make changes to this field.
Therefore, provide a ratelimit_state_inc_miss() function that increments
the ->missed field, a ratelimit_state_get_miss() function that reads
out the ->missed field, and a ratelimit_state_reset_miss() function
that reads out that field, but that also resets its value to zero.
These functions will replace client-code open-coded uses of ->missed.
In addition, a new ratelimit_state_reset_interval() function encapsulates
what was previously open-coded lock acquisition and direct field updates.
[ paulmck: Apply kernel test robot feedback. ]
Link: https://lore.kernel.org/all/fbe93a52-365e-47fe-93a4-44a44547d601@paulmck-laptop/
Link: https://lore.kernel.org/all/20250423115409.3425-1-spasswolf@web.de/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Add usb_free_urb() in the error path to prevent memory leak.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Link: https://patch.msgid.link/aA3_maPlEJzO7wrL@pc
[fix subject]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As per IEEE 802.11be-2024 - 9.4.2.321, EHT operation element
contains MCS15 Disable subfield as the sixth bit, which is set when
MCS15 support is not enabled.
Get MCS15 support from EHT operation params and add it in link_conf
so that driver can use this value to know if EHT-MCS 15 reception
is enabled.
Co-developed-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Dhanavandhana Kannan <quic_dhanavan1@quicinc.com>
Signed-off-by: Mohan Kumar G <quic_mkumarg@quicinc.com>
Link: https://patch.msgid.link/20250505152836.3266829-1-quic_mkumarg@quicinc.com
[remove pointless !! for bool assignment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add pmkid parameter in "brcmf_auth_req_status_le" structure to
align the buffer size defined in firmware "wl_auth_req_status"
structure.
Signed-off-by: Ting-Ying Li <tingying.li@infineon.com>
[arend: adapted path to apply to per-vendor variant]
[arend: added kerneldoc for new struct field]
Tested-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250425085519.492267-5-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Firmware has SME functionality but would like the userspace to handle
SAE authentication. This patch adds support for such an external SAE
authentication mechanism in station mode.
Signed-off-by: Chung-Hsien Hsu <chung-hsien.hsu@infineon.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@infineon.com>
[arend: rework patch for per-vendor framework]
Tested-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250425085519.492267-4-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Adding two vendor operations that can be used to provide per-vendor
cfg80211 callbacks and per-vendor handlers for firmware events. These
two are often related to handling interactions from user-space through
nl80211. Exporting brcmf_fweh_register() for registering the per-vendor
event handler callbacks. Some other exports for get event name string
and allowing use of brcmf_dbg() in per-vendor module.
Tested-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250425085519.492267-2-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This enables HDMI CEC and routes it to the HDMI port on all supported
Tegra210, Tegra186, and Tegra194 devkits.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250413-tegra-cec-v4-4-b6337b66ccad@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
The tegra_cec driver only declares support up to Tegra210 and will not
declare support for Tegra186 or Tegra194. Thus list a fallback
compatible for these chips to tegra210-cec as they work as-is with the
existing driver.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250413-tegra-cec-v4-2-b6337b66ccad@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
When processing a PREQ the code would always check whether we have a
mesh path locally and reply accordingly. However, when forwarding is
disabled then we should not reply with this information as we will not
forward data packets down that path.
Move the check for dot11MeshForwarding up in the function and skip the
mesh path lookup in that case. In the else block, set forward to false
so that the rest of the function becomes a no-op and the
dot11MeshForwarding check does not need to be duplicated.
This explains an effect observed in the Freifunk community where mesh
forwarding is disabled. In that case a mesh with three STAs and only bad
links in between them, individual STAs would occionally have indirect
mpath entries. This should not have happened.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Reviewed-by: Rouven Czerwinski <rouven@czerwinskis.de>
Link: https://patch.msgid.link/20250430191042.3287004-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These are already used in device trees, so describe them here. As the
driver only declares up through Tegra210, these must use a fallback
compatible of tegra210-cec.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250413-tegra-cec-v4-1-b6337b66ccad@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
- Some fixes to help with filesystem analysis: ensure superblock error
count gets written if we go ERO, don't discard the journal
aggressively (so it's available for list_journal -a).
- Fix lost wakeup on arm causing us to get stuck when reading btree
nodes.
- Fix fsck failing to exit on ctrl-c.
- An additional fix for filesystems with misaligned bucket sizes: we now
ensure that allocations are properly aligned.
- Setting background target but not promote target will now leave that
data cached on the foreground target, as it used to.
- Revert a change to when we allocate the VFS superblock, this was done
for implementing blk_holder_ops but ended up not being needed, and
allocating a superblock and not setting SB_BORN while we do recovery
caused sync() calls and other things to hang.
- Assorted fixes for harmless error messages that caused concern to
users.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmgdDE0ACgkQE6szbY3K
bnaKJA/+LGbMm1/dxCHSXP9CVbqB4cZL+UaP+01EDLXn+EQPrc1Zrt3TZznj79HR
noCkX/L8hg8i06KNFYo4ZjARdt6Erlizoc3sy8QYKixyC3qzpiEwSt78aRufphWZ
GO0GKkWuBrUC4Fsyc3lLmwcWCSMC7s4CofGsk4aprhddvv5taSR41CB2kxVa0t2c
LFastz1kCglDWepND+1Ie6fsC3XNtd5X65bc4K7w2nS2/2Tlzcvh3If3wbNu2Edo
/XMGyHJp0pcUT2UKJUp3a88HdjSrJLY2sP1B4+shs9McYhZ3xWq0okPjfcidDA0V
eGlHpcrNMwWp4l0etROI0Qo97/jA+UTJc5uCXbReNWEdaFz0+w8VeEo1dJIGDJKR
5xLM2fkyFiar5ee7KlMdicxVMiKLgyy+V8NGUUWktLYyuoEb7bJIlnlqyxRVhCMn
cLJ6AWwv7wmw40S74VHg5tjdkflB52BiJISK5I3FL1KCyz848nUzidEhYMCsPQaw
AZJudl5FxymJMNQLKso7KyDE9ce9QbmUyQgHGDde3HkSEym1NuTNpeiMxZu/skPj
JTlG/vFefQ0DhGcIF962rOAifdHS7YJftXo54YMtIbbix+RxyLRszet9QzJJxYlz
sAQ8ncgL9hmhMZDj0ym88quLALmm3VJNcAb0TZVigf/HPX1Tx/U=
=O9KF
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-05-08' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
- Some fixes to help with filesystem analysis: ensure superblock
error count gets written if we go ERO, don't discard the journal
aggressively (so it's available for list_journal -a)
- Fix lost wakeup on arm causing us to get stuck when reading btree
nodes
- Fix fsck failing to exit on ctrl-c
- An additional fix for filesystems with misaligned bucket sizes: we
now ensure that allocations are properly aligned
- Setting background target but not promote target will now leave that
data cached on the foreground target, as it used to
- Revert a change to when we allocate the VFS superblock, this was done
for implementing blk_holder_ops but ended up not being needed, and
allocating a superblock and not setting SB_BORN while we do recovery
caused sync() calls and other things to hang
- Assorted fixes for harmless error messages that caused concern to
users
* tag 'bcachefs-2025-05-08' of git://evilpiepirate.org/bcachefs:
bcachefs: Don't aggressively discard the journal
bcachefs: Ensure superblock gets written when we go ERO
bcachefs: Filter out harmless EROFS error messages
bcachefs: journal_shutdown is EROFS, not EIO
bcachefs: Call bch2_fs_start before getting vfs superblock
bcachefs: fix hung task timeout in journal read
bcachefs: Add missing barriers before wake_up_bit()
bcachefs: Ensure proper write alignment
bcachefs: Improve want_cached_ptr()
bcachefs: thread_with_stdio: fix spinning instead of exiting
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250410063919.11199-1-francesco@dolcini.it
Signed-off-by: Thierry Reding <treding@nvidia.com>
If a serial-tegra interface does not have an alias, the driver fails to
probe with an error:
serial-tegra 70006300.serial: failed to get alias id, errno -19
This prevents the bluetooth device from being accessible.
Fixes: 6eba6471bb ("arm64: tegra: Wire up Bluetooth on Jetson TX1 module")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://lore.kernel.org/r/20250420-tx1-bt-v1-1-153cba105a4e@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
This was done for Tegra194 and Tegra234 in 2838cfd, but Tegra186 was not
part of that change. The same reasoning for that commit also applies to
Tegra186, plus keeping the archs as close to each other as possible makes
it easier to compare between them and support features concurrently.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250419-tegra186-host1x-addr-size-v1-1-a7493882248d@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
The gpu node originally was explicitly left disabled as it was expected
for the bootloader to enable it. However, this is only done in u-boot.
If u-boot is not in the boot chain, this will never be enabled. Other
Tegra210 devices already explicitly enable the gpu, so make p2180 match.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250420-tx1-gpu-v1-1-d500de18e43e@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
With UBSAN enabled, we're getting the following trace:
UBSAN: array-index-out-of-bounds in .../drivers/clk/clk-s2mps11.c:186:3
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
This is because commit f316cdff8d ("clk: Annotate struct
clk_hw_onecell_data with __counted_by") annotated the hws member of
that struct with __counted_by, which informs the bounds sanitizer about
the number of elements in hws, so that it can warn when hws is accessed
out of bounds.
As noted in that change, the __counted_by member must be initialised
with the number of elements before the first array access happens,
otherwise there will be a warning from each access prior to the
initialisation because the number of elements is zero. This occurs in
s2mps11_clk_probe() due to ::num being assigned after ::hws access.
Move the assignment to satisfy the requirement of assign-before-access.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250326-s2mps11-ubsan-v1-1-fcc6fce5c8a9@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The gpu node originally was explicitly left disabled as it was expected
for the bootloader to enable it. However, this is only done in U-Boot.
If U-Boot is not in the boot chain, this will never be enabled. Other
Tegra186 devices already explicitly enable the GPU, so make p3310 match.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250426-tx2-gpu-v1-1-fa1c78dcdbdc@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
The referenced commit only removed some of the names, missing all that
weren't in use at the time. The commit removes the rest.
Fixes: 71de0a054d ("arm64: tegra: Drop serial clock-names and reset-names")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250428-tegra-serial-fixes-v1-1-4f47c5d85bf6@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is based on the existing configuration of the Jetson TX2 NX devkit.
The fan and thermal characteristics of the two devkits are similar, so
using the same configuration.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250427-tx2-therm-v1-1-65ddb4314723@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
This is based on 6f78a94, which enabled added the fan and thermal zones
for the Jetson Nano Devkit. The fan and thermal characteristics of the
two devkits are similar, so using the same configuration.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://lore.kernel.org/r/20250501-tx1-therm-v2-1-abdb1922c001@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
For newer platforms (post DG2) hardware intentionally stalls on
submisstion of concurrent submissions on RCS and CCS of different
address spaces. With this workaround GuC will never schedule such
conlicting contexts; preventing detection of a stall as a hang.
GuC specs recommend to enable this for all platforms starting from MTL
supporting CCS.
v2: Use existing macros for version check. (Jani)
v3: Reword explanation for clarity. Remove unneeded parens. Remove
accidental comment change. (Daniele)
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250502223924.94628-1-julia.filipchuk@intel.com
Add device-tree for ASUS Transformer Pad LTE TF300TL, which is NVIDIA
Tegra30-based tablet device.
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250503102950.32744-4-clamor95@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Convert the NVIDIA Legacy interrupt controller binding to schema
format. It's a straight-forward conversion of the typical interrupt
controller.
All the possible compatibles were not documented, so add the ones in
use.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250505144759.1291261-1-robh@kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>
For Tegra234 devices, set QSPI0_2X_PM to 199.99 MHz and QSPI0_PM to
99.99 MHz using PLLC as the parent clock. These frequencies enable
Quad IO reads at up to 99.99 MHz, the maximum achievable given PLL
and clock divider limitations. Introduce IOMMU property which is
needed for internal DMA transfers.
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://lore.kernel.org/r/20250506152350.3370291-2-va@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
I've found some leaks from 'perf trace -a'.
It seems there are more leaks but this is what I can find for now.
Fixes: 082ab9a18e ("perf trace: Filter out 'sshd' in the tracer ancestry in syswide tracing")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403054213.7021-1-namhyung@kernel.org
[ split from a larget patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update text binding to YAML.
Changes during conversion:
- Add a fallback for "nvidia,tegra30-apbdma" as it is
compatible with the IP core on "nvidia,tegra20-apbdma".
- Update examples and include appropriate file directives to resolve
errors identified by `dt_binding_check` and `dtbs_check`.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250507-nvidea-dma-v4-2-6161a8de376f@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
I've found some leaks from 'perf trace -a'.
It seems there are more leaks but this is what I can find for now.
Fixes: 70351029b5 ("perf thread: Add support for reading the e_machine type for a thread")
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250403054213.7021-1-namhyung@kernel.org
[ split from a larget patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename the apbdma nodename from "dma@" to "dma-controller@" to align with
linux common dma-controller binding.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250507-nvidea-dma-v4-1-6161a8de376f@gmail.com
[treding@nvidia.com: adjust subject prefix for consistency]
Signed-off-by: Thierry Reding <treding@nvidia.com>
While an event tears down all links to it as an aux, the iteration
happens on the event's group leader instead of the group itself.
If the event is a group leader, it has no effect because the event is
also its own group leader. But otherwise there would be a risk to detach
all the siblings events from the wrong group leader.
It just happens to work because each sibling's aux link is tested
against the right event before proceeding. Also the ctx lock is the same
for the events and their group leader so the iteration is safe.
Yet the iteration is confusing. Clarify the actual intent.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424161128.29176-5-frederic@kernel.org
The CPU hotplug handlers are called twice: at prepare and online stage.
Their role is to:
1) Enable/disable a CPU context. This is irrelevant and even buggy at
the prepare stage because the CPU is still offline. On early
secondary CPU up, creating an event attached to that CPU might
silently fail because the CPU context is observed as online but the
context installation's IPI failure is ignored.
2) Update the scope cpumasks and re-migrate the events accordingly in
the CPU down case. This is irrelevant at the prepare stage.
3) Remove the events attached to the context of the offlining CPU. It
even uses an (unnecessary) IPI for it. This is also irrelevant at the
prepare stage.
Also none of the *_PREPARE and *_STARTING architecture perf related CPU
hotplug callbacks rely on CPUHP_PERF_PREPARE.
CPUHP_AP_PERF_ONLINE is enough and the right place to perform the work.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424161128.29176-4-frederic@kernel.org
The following commit:
da916e96e2 ("perf: Make perf_pmu_unregister() useable")
has introduced two significant event's parent lifecycle changes:
1) An event that has exited now has EVENT_TOMBSTONE as a parent.
This can result in a situation where the delayed wakeup irq_work can
accidentally dereference EVENT_TOMBSTONE on:
CPU 0 CPU 1
----- -----
__schedule()
local_irq_disable()
rq_lock()
<NMI>
perf_event_overflow()
irq_work_queue(&child->pending_irq)
</NMI>
perf_event_task_sched_out()
raw_spin_lock(&ctx->lock)
ctx_sched_out()
ctx->is_active = 0
event_sched_out(child)
raw_spin_unlock(&ctx->lock)
perf_event_release_kernel(parent)
perf_remove_from_context(child)
raw_spin_lock_irq(&ctx->lock)
// Sees !ctx->is_active
// Removes from context inline
__perf_remove_from_context(child)
perf_child_detach(child)
event->parent = EVENT_TOMBSTONE
raw_spin_rq_unlock_irq(rq);
<IRQ>
perf_pending_irq()
perf_event_wakeup(child)
ring_buffer_wakeup(child)
rcu_dereference(child->parent->rb) <--- CRASH
This also concerns the call to kill_fasync() on parent->fasync.
2) The final parent reference count decrement can now happen before the
the final child reference count decrement. ie: the parent can now
be freed before its child. On PREEMPT_RT, this can result in a
situation where the delayed wakeup irq_work can accidentally
dereference a freed parent:
CPU 0 CPU 1 CPU 2
----- ----- ------
perf_pmu_unregister()
pmu_detach_events()
pmu_get_event()
atomic_long_inc_not_zero(&child->refcount)
<NMI>
perf_event_overflow()
irq_work_queue(&child->pending_irq);
</NMI>
<IRQ>
irq_work_run()
wake_irq_workd()
</IRQ>
preempt_schedule_irq()
=========> SWITCH to workd
irq_work_run_list()
perf_pending_irq()
perf_event_wakeup(child)
ring_buffer_wakeup(child)
event = child->parent
perf_event_release_kernel(parent)
// Not last ref, PMU holds it
put_event(child)
// Last ref
put_event(parent)
free_event()
call_rcu(...)
rcu_core()
free_event_rcu()
rcu_dereference(event->rb) <--- CRASH
This also concerns the call to kill_fasync() on parent->fasync.
The "easy" solution to 1) is to check that event->parent is not
EVENT_TOMBSTONE on perf_event_wakeup() (including both ring buffer
and fasync uses).
The "easy" solution to 2) is to turn perf_event_wakeup() to wholefully
run under rcu_read_lock().
However because of 2), sanity would prescribe to make event::parent
an __rcu pointer and annotate each and every users to prove they are
reliable.
Propose an alternate solution and restore the stable pointer to the
parent until all its children have called _free_event() themselves to
avoid any further accident. Also revert the EVENT_TOMBSTONE design
that is mostly here to determine which caller of perf_event_exit_event()
must perform the refcount decrement on a child event matching the
increment in inherit_event().
Arrange instead for checking the attach state of an event prior to its
removal and decrement the refcount of the child accordingly.
Fixes: da916e96e2 ("perf: Make perf_pmu_unregister() useable")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
When inherit_event() fails after the child allocation but before the
parent refcount has been incremented, calling put_event() wrongly
decrements the reference to the parent, risking to free it too early.
Also pmu_get_event() can't be holding a reference to the child
concurrently at this point since it is under pmus_srcu critical section.
Fix it with restoring the deleted free_event() function and call it on
the failing child in order to free it directly under the verified
assumption that its refcount is only 1. The refcount to the parent is
then voluntarily omitted.
Fixes: da916e96e2 ("perf: Make perf_pmu_unregister() useable")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424161128.29176-2-frederic@kernel.org
