Add new helper disable_elv_switch() and new flag QUEUE_FLAG_NO_ELV_SWITCH
for disabling elevator switch before deleting disk:
- originally flag QUEUE_FLAG_REGISTERED is added for preventing elevator
switch during removing disk, but this flag has been used widely for
other purposes, so add one new flag for disabling elevator switch only
- for avoiding deadlock risk, we have to move elevator queue
register/unregister out of elevator lock and queue freeze, which will be
done in next patch. However, this way adds small race window between elevator
switch and deleting ->queue_kobj, in which elevator queue register/unregister
could be run concurrently. The added helper will be used for avoiding the race
in the following patch.
- drain in-progress elevator switch before deleting disk
Suggested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-21-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prepare for moving elv_register[unregister]_queue out of elevator_lock
& queue freezing, so we may have to call elv_unregister_queue() after
elevator ->exit() is called, then there is small window for user to
call into ->show()/store(), and user-after-free can be caused.
Fail to show/store elevator sysfs attribute if elevator is dying by
adding one new flag of ELEVATOR_FLAG_DYNG, which is protected by
elevator ->sysfs_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-20-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
elevatore queue's type is assigned since its allocation, and never
get cleared until it is released.
So its ->type is always not NULL, remove the unnecessary check.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-19-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass elevator_queue reference to elv_register_queue() & elv_unregister_queue().
No functional change, and prepare for moving the two out of elevator
lock & freezing queue, when we need to store the old & new elevator
queue in `struct elv_change_ctx` instance, then both two can co-exist
for short while, so we have to pass the exact elevator_queue instance
to elv_register_queue & unregister_queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-18-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Elevator change is one well-define behavior:
- tear down current elevator if it exists
- setup new elevator
It is supposed to cover any case for changing elevator by single
internal API, typically the following cases:
- setup default elevator in add_disk()
- switch to none in del_disk()
- reset elevator in blk_mq_update_nr_hw_queues()
- switch elevator in sysfs `store` elevator attribute
This patch uses elevator_change() to cover all above cases:
- every elevator switch is serialized with each other: add_disk/del_disk/
store elevator is serialized already, blk_mq_update_nr_hw_queues() uses
srcu for syncing with the other three cases
- for both add_disk()/del_disk(), queue freeze works at atomic mode
or has been froze, so the freeze in elevator_change() won't add extra
delay
- `struct elev_change_ctx` instance holds any info for changing elevator
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-17-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add `struct elv_change_ctx` and prepare for unifying elevator change by
elevator_change(). With this way, any input & output parameter can
be provided & observed in top helper.
This way helps to move kobject add/delete & debugfs register/unregister
out of ->elevator_lock & freezing queue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-16-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move queue freezing & elevator_lock into elevator_change(), and prepare
for using elevator_change() for setting up & tearing down default elevator
too.
Also add lockdep_assert_held() in __elevator_change() because either
read or write lock is required for changing elevator.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-15-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In blk_mq_update_nr_hw_queues(), nr_hw_queues changes and elevator data
depends on it, and elevator has to be reattached, so call elevator_switch()
to force attachment.
Add elv_update_nr_hw_queues() simply for blk_mq_update_nr_hw_queues() to
reattach elevator, since elevator switch isn't likely when running
blk_mq_update_nr_hw_queues(). This way removes the current switch
none and switch back code.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move blk_queue_registered() check into elv_iosched_store() and prepare
for using elevator_change() for covering any kind of elevator change in
adding/deleting disk and updating nr_hw_queue.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-13-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This removes duplicate code, and keeps the callers tidy.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
That makes the function nicely self-contained and can be used
to avoid code duplication.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both adding/deleting disk code are reader of `nr_hw_queues`, so we can't
allow them in-progress when updating nr_hw_queues, kernel panic and
kasan has been reported in [1].
Prevent adding/deleting disk during updating nr_hw_queues by adding
rw_semaphore to tagset, write lock is grabbed in blk_mq_update_nr_hw_queues(),
and read lock is acquired when adding/deleting disk.
Also mark GFP_NOIO allocation scope for adding/deleting disk because
blk_mq_update_nr_hw_queues() is part of some driver's error handler.
This way avoids lot of trouble.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Nilay Shroff <nilay@linux.ibm.com>
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Closes: https://lore.kernel.org/linux-block/a5896cdb-a59a-4a37-9f99-20522f5d2987@linux.ibm.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add helper add_disk_final() for scanning partitions, announcing disk and
handling the last thing for adding disk.
No functional change, and prepare for prevent adding disk from happening
when updating nr_hw_queues.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250505141805.2751237-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sched debugfs shares same lifetime with scheduler's kobject, and same
lock(elevator lock), so move sched debugfs register/unregister into
elevator_register_queue() and elevator_unregister_queue().
Then we needn't blk_mq_debugfs_register() for us to register sched
debugfs any more.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add blk_mq_sched_reg_debugfs()/blk_mq_sched_unreg_debugfs() to clean up
sched init/exit code a bit.
Register & unregister debugfs for sched & sched_hctx order is changed a
bit, but it is safe because sched & sched_hctx is guaranteed to be ready
when exporting via debugfs.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use q->elevator with ->elevator_lock held in elv_iosched_show(), since
the local cached elevator reference may become stale after getting
->elevator_lock.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both elevator_switch() and elevator_disable() are only called from the
two code paths, in which queue is guaranteed to be frozen.
So don't call freeze queue in the two functions, also add asserts for
queue freeze.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ELEVATOR_FLAG_DISABLE_WBT is only used by BFQ to disallow wbt when BFQ is
in use. The flag is set in BFQ's init(), and cleared in BFQ's exit().
Making it as request queue flag, so that we can avoid to deal with elevator
switch race. Also it isn't graceful to checking one scheduler flag in
wbt_enable_default().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move blk_mq_add_queue_tag_set() after blk_mq_map_swqueue(), and publish
this request queue to tagset after everything is setup.
This way is safe because BLK_MQ_F_TAG_QUEUE_SHARED isn't used by
blk_mq_map_swqueue(), and this flag is mainly checked in fast IO code
path.
Prepare for removing ->elevator_lock from blk_mq_map_swqueue() which
is supposed to be called when elevator switch can't be done.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Closes: https://lore.kernel.org/linux-block/567cb7ab-23d6-4cee-a915-c8cdac903ddd@linux.ibm.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505141805.2751237-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
brd_do_discard() just aligned start sector to page, this can only work
if the discard size if at least one page. For example:
blkdiscard /dev/ram0 -o 5120 -l 1024
In this case, size = (1024 - (8192 - 5120)), which is a huge value.
Fix the problem by round_down() the end sector.
Fixes: 9ead7efc6f ("brd: implement discard support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250506061756.2970934-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, after fetching the page by xa_load() in IO path, there is no
protection and page can be freed concurrently by discard:
cpu0
brd_submit_bio
brd_do_bvec
page = brd_lookup_page
cpu1
brd_submit_bio
brd_do_discard
page = __xa_erase()
__free_page()
// page UAF
Fix the problem by protecting page with rcu.
Meanwhile, if page is already freed, also prevent BUG_ON() by skipping
the write, and user will get zero data later if there is no page.
Fixes: 9ead7efc6f ("brd: implement discard support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250506061756.2970934-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Every ublk I/O command except UBLK_IO_FETCH_REQ checks that the ublk_io
has UBLK_IO_FLAG_OWNED_BY_SRV set. Consolidate the separate checks into
a single one in __ublk_ch_uring_cmd(), analogous to those for
UBLK_IO_FLAG_ACTIVE and UBLK_IO_FLAG_NEED_GET_DATA.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250505172624.1121839-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert binding doc imx.txt to yaml format. Create two yaml files:
fsl,imx6-mipi-csi2.yaml and fsl,imx-capture-subsystem.yaml.
Additional changes:
- add example for fsl,imx6-mipi-csi2
- add irq err1 and err2 description
- update MAINTAINERS
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: drop empty line at the end of the yaml files]
A use-after-free is possible if one thread destroys the file
via __ksmbd_close_fd while another thread holds a reference to
it. The existing checks on fp->refcount are not sufficient to
prevent this.
The fix takes ft->lock around the section which removes the
file from the file table. This prevents two threads acquiring the
same file pointer via __close_file_table_ids, as well as the other
functions which retrieve a file from the IDR and which already use
this same lock.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Enable more support for the Renesas RZN1D-DB and RZN1D-EB development
and expansion boards:
- Polled GPIO buttons (also used on the Marzen development board),
- Synopsys DesignWare I2C adapters,
- National Semiconductor LM75 sensors and compatibles (which requires
not disabling Hardware Monitoring support),
- Arasan SDHCI controllers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/a40aa69832ef292497b9170e2ad607bd9dfd7e21.1745842538.git.geert+renesas@glider.be
After commit 48e7b8e284 ("iommu/arm-smmu-v3: Remove
arm_smmu_domain_finalise() during attach"), an error code is not
returned on the attach path when the smmu does not match with the
domain. This causes problems with VFIO because
vfio_iommu_type1_attach_group() relies on this check to determine domain
compatability.
Re-instate the -EINVAL return value when the SMMU doesn't match on the
device attach path.
Fixes: 48e7b8e284 ("iommu/arm-smmu-v3: Remove arm_smmu_domain_finalise() during attach")
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Link: https://lore.kernel.org/r/20250422112951.2027969-1-xiaqinxin@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the new compatible string and power domain name as introduced in
commit 2c01d90998 ("dt-bindings: gpu: img: Future-proofing
enhancements").
Reviewed-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250428-bxs-4-64-dts-v4-1-eddafb4ae19f@imgtec.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add the DT node for the PRUSS-M processor subsystem that is present
on the K3 AM62x SoCs. The K3 AM62x family of SoC has one PRUSS-M
instance and it has two Programmable Real-Time Units (PRU0 and PRU1).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[ Judith: Fix pruss_iclk id for pruss_coreclk_mux ]
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20250430144343.972234-1-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
AM64x device has 4 R5F cores in the main domain. TI MCU firmware uses
main domain timers as tick timers in these firmwares. Hence keep them
as reserved in the Linux device tree.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-12-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The main rti4 watchdog timer is used by the C7x DSP, so reserve the
timer in the linux device tree.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-11-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
C7x DSP uses main_timer2, so mark it as reserved in linux DT.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-10-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-9-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-8-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
For each remote proc, reserve memory for IPC and bind the mailbox
assignments. Two memory regions are reserved for each remote processor.
The first region of 1MB of memory is used for Vring shared buffers
and the second region is used as external memory to the remote processor
for the resource table and for tracebuffer allocations.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-7-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
AM62A SoCs have a C7xv DSP subsystem with Analytics engine capability.
This subsystem is intended for deep learning purposes. Define the
device node for C7xv DSP.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-6-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
AM62A SoCs have a single R5F core in wakeup domain. This core is
also used as a device manager for the SoC.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-5-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
AM62A SoCs have a single R5F core in the MCU voltage domain.
Add the R5FSS node with the child node for core0 in MCU voltage
domain .dtsi file.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
AM62 SoC devices have a single core R5F processor in wakeup domain.
The R5F processor in wakeup domain is used as a device manager
for the SoC.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add cbass ranges for ATCM and BTCM on am62x device, without
these, remoteproc driver fails to probe and attach to the DM
r5 core and IPC communication is broken.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250502220325.3230653-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The device tree overlay for TEVI-OV5640 requires following voltage
supplies:
AVDD-supply: Analog voltage supply, 2.8 volts
DOVDD-supply: Digital I/O voltage supply, 1.8 volts
DVDD-supply: Digital core voltage supply, 3.3 volts
Add them in the overlay.
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250506045225.1246873-3-r-donadkar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The device tree overlay for OV5640 requires following voltage
supplies:
AVDD-supply: Analog voltage supply, 2.8 volts
DOVDD-supply: Digital I/O voltage supply, 1.8 volts
DVDD-supply: Digital core voltage supply, 1.5 volts
Add them in the overlay.
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250506045225.1246873-2-r-donadkar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The device tree overlay for OV5640 requires following voltage
supplies as mentioned in the table 8-3 of the data-sheet [1].
AVDD-supply: Analog voltage supply, 2.8 volts
DOVDD-supply: Digital I/O voltage supply, 1.8 volts
DVDD-supply: Digital core voltage supply, 1.5 volts
Add them in the overlay.
Link: https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Link: https://lore.kernel.org/r/20250502162539.322091-4-r-donadkar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The device tree overlay for the IMX219 sensor requires three voltage
supplies to be defined: VANA (analog), VDIG (digital core), and VDDL
(digital I/O) [1].
Add the corresponding voltage supply definitions in the overlay so
that the same topography as dt-bindings is present in the DT overlay.
Link: https://datasheets.raspberrypi.com/camera/camera-module-2-schematics.pdf [1]
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
Link: https://lore.kernel.org/r/20250502162539.322091-3-r-donadkar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
