Device Tree and Ethernet MAC driver writers often misunderstand RGMII
delays. Rewrite the Normative section in terms of the PCB, is the PCB
adding the 2ns delay. This meaning was previous implied by the
definition, but often wrongly interpreted due to the ambiguous wording
and looking at the definition from the wrong perspective. The new
definition concentrates clearly on the hardware, and should be less
ambiguous.
Add an Informative section to the end of the binding describing in
detail what the four RGMII delays mean. This expands on just the PCB
meaning, adding in the implications for the MAC and PHY.
Additionally, when the MAC or PHY needs to add a delay, which is
software configuration, describe how Linux does this, in the hope of
reducing errors. Make it clear other users of device tree binding may
implement the software configuration in other ways while still
conforming to the binding.
Fixes: 9d3de3c583 ("dt-bindings: net: Add YAML schemas for the generic Ethernet options")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250430-v6-15-rc3-net-rgmii-delays-v2-1-099ae651d5e5@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware based registers may be different addresses across different
device ids and revision ids. Create a structure to store and access
these addresses.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is to prepare for further products using slightly different
regmap configs.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP on i.MX8MP doesn't have a direct reset line so according to hardware
design team in order to handle assert/deassert/reset functionality we
need to use a combination of control bits from two modules. Audio block
control module for Run/Stall control of the DSP and DAP module in order
to do software reset.
In a first step, for i.MX8MP we are switching on using the reset
controller API to handle the DSP Run/Stall bits i.MX8MP. This comes with
the advantage of offering a better probe ordering and a more natural way
of abstracting the Audio block control bits.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Tested-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250505114251.57018-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The last use of __strp_unpause() was removed in 2022 by
commit 84c61fe1a7 ("tls: rx: do not use the standard strparser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250501002402.308843-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a duplicated word "that that" in the comment describing the
@max_active behavior for unbound workqueues.
Signed-off-by: Guan-Chun Wu <409411716@gms.tku.edu.tw>
Signed-off-by: Tejun Heo <tj@kernel.org>
Merge series from Philipp Stanner <phasta@kernel.org>:
A year ago we spent quite some work trying to get PCI into better shape.
Some pci_ functions can be sometimes managed with devres, which is
obviously bad. We want to provide an obvious API, where pci_ functions
are never, and pcim_ functions are always managed.
Thus, everyone enabling his device with pcim_enable_device() must be
ported to pcim_ functions. Porting all users will later enable us to
significantly simplify parts of the PCI subsystem. See here [1] for
details.
This patch series does that for sound.
Feel free to squash the commits as you see fit.
P.
[1] https://elixir.bootlin.com/linux/v6.14-rc4/source/drivers/pci/devres.c#L18
AMD BIOS team has root caused an issue that NVMe storage failed to come
back from suspend to a lack of a call to _REG when NVMe device was probed.
112a7f9c8e ("PCI/ACPI: Call _REG when transitioning D-states") added
support for calling _REG when transitioning D-states, but this only works
if the device actually "transitions" D-states.
967577b062 ("PCI/PM: Keep runtime PM enabled for unbound PCI devices")
added support for runtime PM on PCI devices, but never actually
'explicitly' sets the device to D0.
To make sure that devices are in D0 and that platform methods such as
_REG are called, explicitly set all devices into D0 during initialization.
Fixes: 967577b062 ("PCI/PM: Keep runtime PM enabled for unbound PCI devices")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Denis Benato <benato.denis96@gmail.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Tested-By: David Perry <david.perry@amd.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://patch.msgid.link/20250424043232.1848107-1-superm1@kernel.org
Building kublk currently fails (with a "could not find linux/ublk_cmd.h"
error message) if kernel headers are not installed in a system-global
location (i.e. somewhere in the compiler's default include search path).
This failure is unnecessary, as make kselftest installs kernel headers
in the build tree - kublk's build just isn't looking for them properly.
There is an include path in kublk's CFLAGS which is probably intended to
find the kernel headers installed in the build tree; fix it so that it
can actually find them.
This introduces some macro redefinition issues between glibc-provided
headers and kernel headers; fix those by eliminating one include in
kublk.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-3-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convention dictates that tests should not log anything on success. Make
test_generic_06 follow this convention.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-2-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Compiler warnings can catch bugs at compile time; thus, heeding them is
usually a good idea. Turn warnings into errors by default for the kublk
build so that anyone making changes is forced to heed them. Compiler
warnings can also sometimes produce annoying false positives, so provide
a flag WERROR that the developer can use as follows to have the build
and selftests run go through even if there are warnings:
make WERROR=0 TARGETS=ublk kselftest
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-1-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The static platform_component name string is overwritten on card tear
down by sof_link_unload(). After this has happened the NULL check
on it in asoc_sdw_init_simple_dai_link() will fail when the driver
is reprobed, causing the machine driver to fail probe. However, it
also turns out that the ASoC core sets this string for all topology
systems in soc_check_tplg_fes() anyway, after the aforementioned
NULL check. So there is no need for the machine driver to set
the platform name to anything meaningful at all.
Replace all the platform_component stuff with some simple place
holders and importantly since the core tampers with the
snd_soc_dai_link_component in multiple places allocate a new one
for each usage.
Fixes: 59f8b622d5 ("ASoC: intel/sdw_utils: refactor init_dai_link() and init_simple_dai_link()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250505141409.2614010-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no point in passing num_platforms into
asoc_sdw_init_simple_dai_link(). Firstly, as a single pointer for the
component name is passed in only a single string can be passed and
secondly if it is a complex DAI with multiple platforms it would make
more sense to use asoc_sdw_init_dai_link().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250505141409.2614010-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using of_property_read_bool() for non-boolean properties is deprecated
and results in a warning during runtime since commit c141ecc3ce ("of:
Warn when of_property_read_bool() is used on non-boolean properties").
Fixes: b6ef830c60 ("i2c: omap: Add support for setting mux")
Cc: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250415075230.16235-1-johan+linaro@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
BTF dedup has a strong assumption that compiler with deduplicate identical
types within any given compilation unit (i.e., .c file). This property
is used when establishing equilvalence of two subgraphs of types.
Unfortunately, this property doesn't always holds in practice. We've
seen cases of having truly identical structs, unions, array definitions,
and, most recently, even pointers to the same type being duplicated
within CU.
Previously, we mitigated this on a case-by-case basis, adding a few
simple heuristics for validating that two BTF types (having two
different type IDs) are structurally the same. But this approach scales
poorly, and we can have more weird cases come up in the future.
So let's take a half-step back, and implement a bit more generic
structural equivalence check, recursively. We still limit it to
reasonable depth to avoid long reference loops. Depth-wise limiting of
potentially cyclical graph isn't great, but as I mentioned below doesn't
seem to be detrimental performance-wise. We can always improve this in
the future with per-type visited markers, if necessary.
Performance-wise this doesn't seem too affect vmlinux BTF dedup, which
makes sense because this logic kicks in not so frequently and only if we
already established a canonical candidate type match, but suddenly find
a different (but probably identical) type.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250501235231.1339822-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Radxa E20C ships an onboard I2C EEPROM for storing production
information. Enable it in devicetree.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250417120118.17610-6-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Describe I2C controllers shipped by RK3528 in devicetree. For I2C-2,
I2C-4 and I2C-7 which come with only a set of possible pins, a default
pin configuration is included.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250417120118.17610-5-ziyao@disroot.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With the latest LLVM bpf selftests build will fail with
the following error message:
progs/profiler.inc.h:710:31: error: default initialization of an object of type 'typeof ((parent_task)->real_cred->uid.val)' (aka 'const unsigned int') leaves the object uninitialized and is incompatible with C++ [-Werror,-Wdefault-const-init-unsafe]
710 | proc_exec_data->parent_uid = BPF_CORE_READ(parent_task, real_cred, uid.val);
| ^
tools/testing/selftests/bpf/tools/include/bpf/bpf_core_read.h:520:35: note: expanded from macro 'BPF_CORE_READ'
520 | ___type((src), a, ##__VA_ARGS__) __r; \
| ^
This happens because BPF_CORE_READ (and other macro) declare the
variable __r using the ___type macro which can inherit const modifier
from intermediate types.
Fix this by using __typeof_unqual__, when supported. (And when it
is not supported, the problem shouldn't appear, as older compilers
haven't complained.)
Fixes: 792001f4f7 ("libbpf: Add user-space variants of BPF_CORE_READ() family of macros")
Fixes: a4b09a9ef9 ("libbpf: Add non-CO-RE variants of BPF_CORE_READ() macro family")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250502193031.3522715-1-a.s.protopopov@gmail.com
Drivers with "memory-region" properties currently have to do their own
parsing of "memory-region" properties. The result is all the drivers
have similar patterns of a call to parse "memory-region" and then get
the region's address and size. As this is a standard property, it should
have common functions for drivers to use. Add new functions to count the
number of regions and retrieve the region's address as a resource.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20250423-dt-memory-region-v2-v2-1-2fbd6ebd3c88@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 4bc12818b3 ("virtio-net: disable delayed refill when pausing rx")
fixed a deadlock between reconfig paths and refill work trying to disable
the same NAPI instance. The refill work can't run in parallel with reconfig
because trying to double-disable a NAPI instance causes a stall under the
instance lock, which the reconfig path needs to re-enable the NAPI and
therefore unblock the stalled thread.
There are two cases where we re-enable refill too early. One is in the
virtnet_set_queues() handler. We call it when installing XDP:
virtnet_rx_pause_all(vi);
...
virtnet_napi_tx_disable(..);
...
virtnet_set_queues(..);
...
virtnet_rx_resume_all(..);
We want the work to be disabled until we call virtnet_rx_resume_all(),
but virtnet_set_queues() kicks it before NAPIs were re-enabled.
The other case is a more trivial case of mis-ordering in
__virtnet_rx_resume() found by code inspection.
Taking the spin lock in virtnet_set_queues() (requested during review)
may be unnecessary as we are under rtnl_lock and so are all paths writing
to ->refill_enabled.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Bui Quang Minh <minhquangbui99@gmail.com>
Fixes: 4bc12818b3 ("virtio-net: disable delayed refill when pausing rx")
Fixes: 413f0271f3 ("net: protect NAPI enablement with netdev_lock()")
Link: https://patch.msgid.link/20250430163758.3029367-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang says:
====================
net_sched: fix a regression in sch_htb
This patchset contains a fix for the regression reported by Alan and a
selftest to cover that case. Please see each patch description for more
details.
====================
Link: https://patch.msgid.link/20250428232955.1740419-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the reproducer from Alan into TC selftests and use scapy to
generate TCP traffic instead of relying on ping command.
Cc: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250428232955.1740419-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alan reported a NULL pointer dereference in htb_next_rb_node()
after we made htb_qlen_notify() idempotent.
It turns out in the following case it introduced some regression:
htb_dequeue_tree():
|-> fq_codel_dequeue()
|-> qdisc_tree_reduce_backlog()
|-> htb_qlen_notify()
|-> htb_deactivate()
|-> htb_next_rb_node()
|-> htb_deactivate()
For htb_next_rb_node(), after calling the 1st htb_deactivate(), the
clprio[prio]->ptr could be already set to NULL, which means
htb_next_rb_node() is vulnerable here.
For htb_deactivate(), although we checked qlen before calling it, in
case of qlen==0 after qdisc_tree_reduce_backlog(), we may call it again
which triggers the warning inside.
To fix the issues here, we need to:
1) Make htb_deactivate() idempotent, that is, simply return if we
already call it before.
2) Make htb_next_rb_node() safe against ptr==NULL.
Many thanks to Alan for testing and for the reproducer.
Fixes: 5ba8b837b5 ("sch_htb: make htb_qlen_notify() idempotent")
Reported-by: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250428232955.1740419-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Rockchip RK3576 gates the SAI MCLKOUT clocks behind some IOC GRF
writes.
Add these clock branches, and add the IOC GRF to the auxiliary GRF
hashtable.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-4-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Some rockchip SoCs, namely the RK3576, have bits in a General Register
File (GRF) that act just like clock gates. The downstream vendor kernel
simply maps over the already mapped GRF range with a generic clock gate
driver. This solution isn't suitable for upstream, as a memory range
will be in use by multiple drivers at the same time, and it leaks
implementation details into the device tree.
Instead, implement this with a new clock branch type in the Rockchip
clock driver: GRF gates. Somewhat akin to MUXGRF, this clock branch
depends on the type of GRF, but functions like a gate instead.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-3-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MUXGRF clock branch type depends on having access to some sort of
GRF as a regmap to be registered. So far, we could easily get away with
only ever having one GRF stowed away in the context.
However, newer Rockchip SoCs, such as the RK3576, have several GRFs
which are relevant for clock purposes. It already depends on the pmu0
GRF for MUXGRF reasons, but could get away with not refactoring this
because it didn't need the sysgrf at all, so could overwrite the pointer
in the clock provider to the pmu0 grf regmap handle.
In preparation for needing to finally access more than one GRF per SoC,
let's untangle this. Introduce an auxiliary GRF hashmap, and a GRF type
enum. The hashmap is keyed by the enum, and clock branches now have a
struct member to store the value of that enum, which defaults to the
system GRF.
The SoC-specific _clk_init function can then insert pointers to GRF
regmaps into the hashmap based on the grf type.
During clock branch registration, we then pick the right GRF for each
branch from the hashmap if something other than the sys GRF is
requested.
The reason for doing it with this grf type indirection in the clock
branches is so that we don't need to define the MUXGRF branches in a
separate step, just to have a direct pointer to a regmap available
already.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-2-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Certain clocks on the RK3576 are additionally essentially "gated" behind
some bit toggles in the IOC GRF range. Downstream ungates these by
adding a separate clock driver that maps over the GRF range and leaks
their implementation of this into the DT.
Instead, define some new clock IDs for these, so that consumers of these
types of clocks can properly articulate which clock they're using, so
that we can then add them to the clock driver for SoCs that need them.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250502-rk3576-sai-v3-1-376cef19dd7c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaBVftAAKCRAraS+Z+3y5
EzJ7AP9dtYuBHmU0tB5upuLzQ9sVxaCXs2linfRKK40A5YJDcgD/fBQqPzhxCqZR
moHEqelMLgrAUcyro5egdRJZPcaTfQE=
=6Las
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts
1fdbe0b184 bcachefs: Make sure c->vfs_sb is set before starting fs
switched up bch2_fs_get_tree() so that we got a superblock before
calling bch2_fs_start, so that c->vfs_sb would always be initialized
while the filesystem was active.
This turned out not to be necessary, because blk_holder_ops were
implemented using our own locking, not vfs locking.
And this had the side effect of creating a super_block and doing our
full recovery (including potentially fsck) before setting SB_BORN, which
causes things like sync calls to hang until our recovery is finished.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The stat is always 0 now, so remove it and hardwire the user visible
output to 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The block layer bounce buffering support is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All users are gone now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
usb-storage is the last user of the block layer bounce buffering now,
and only uses it for HCDs that do not support DMA on highmem configs.
Remove this support and fail the probe so that the block layer bounce
buffering can go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is one of the last drivers depending on the block layer bounce
buffering code. Restrict it to run on non-highmem configs so that the
bounce buffering code can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is one of the last drivers depending on the block layer bounce
buffering code. Restrict it to run on non-highmem configs so that the
bounce buffering code can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is one of the last drivers depending on the block layer bounce
buffering code. Restrict it to run on non-highmem configs so that the
bounce buffering code can be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250505081138.3435992-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trying to cut the branch you are sat on is pretty dumb. And so is
trying to disable the instruction set you are executing on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250429114117.3618800-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
A sorry excuse for a selftest is trying to disable AArch64 support.
And yes, this goes as well as you can imagine.
Let's forbid this sort of things. Normal userspace shouldn't get
caught doing that.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250429114117.3618800-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We keep setting and clearing these bits depending on the role of
the host kernel, mimicking what we do for nVHE. But that's actually
pretty pointless, as we always want physical interrupts to make it
to the host, at EL2.
This has also two problems:
- it prevents IRQs from being taken when these bits are cleared
if the implementation has chosen to implement these bits as
masks when HCR_EL2.{TGE,xMO}=={0,0}
- it triggers a bad erratum on the AmpereOne HW, which catches
fire on clearing these bits while an interrupt is being taken
(AC03_CPU_36).
Let's kill these two birds with a single stone, and permanently
set the xMO bits when running VHE. This involves a bit of surgery
on code paths that rely on flipping these bits on and off for
other purposes.
Note that the earliest setting of hcr_el2 (in the init_hcr_el2
macro) is left untouched as is runs extremely early, with interrupts
disabled, and soon enough overwritten with the final value containing
the xMO bits.
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250429114326.3618875-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Commit fce886a602 ("KVM: arm64: Plumb the pKVM MMU in KVM") made the
initialization of the local memcache variable in user_mem_abort()
conditional, leaving a codepath where it is used uninitialized via
kvm_pgtable_stage2_map().
This can fail on any path that requires a stage-2 allocation
without transition via a permission fault or dirty logging.
Fix this by making sure that memcache is always valid.
Fixes: fce886a602 ("KVM: arm64: Plumb the pKVM MMU in KVM")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/kvmarm/3f5db4c7-ccce-fb95-595c-692fa7aad227@redhat.com/
Link: https://lore.kernel.org/r/20250505173148.33900-1-sebott@redhat.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
