The last use of snd_seq_queue_client_leave_cells() was removed in 2018
by
commit 85d59b57be ("ALSA: seq: Remove superfluous
snd_seq_queue_client_leave_cells() call")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-4-linux@treblig.org
snd_dmaengine_pcm_open_request_chan() last use was removed in 2022's
commit b401d1fd80 ("ASoC: pxa: remove unused board support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-3-linux@treblig.org
The last use of snd_pcm_rate_range_to_bits() was removed in 2016 by
commit b6b6e4d670 ("ASoC: topology: Fix setting of stream rates, rate_min
and rate_max")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-2-linux@treblig.org
The error checks for pcim_iomap() have the function return -EINVAL.
-ENOMEM is a more appropriate error code.
Replace -EINVAL with -ENOMEM.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250425081742.61623-6-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Remove the call to pci_release_regions(), since pcim_ functions do
cleanup automatically.
Pass 0 as length parameter to pcim_iomap(), which is the standard way
for ioremapping an entire BAR.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250425081742.61623-5-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Remove the goto jump to pci_release_regions(), since pcim_ functions
clean up automatically.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250425081742.61623-4-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Remove surplus calls to PCI release functions, since pcim_ functions do
cleanup automatically.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250425081742.61623-3-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver has only of_device_id table, however it also has MODULE_ALIAS()
for platform name, thus assume there is a configuration where this can
be loaded outside of OF system. In such case of_device_get_match_data()
will return NULL, which is already checked in one place of probe()
function but not in the other, leading to Smatch warning:
drivers/spi/spi-cadence-quadspi.c:1942 cqspi_probe() error: we previously assumed 'ddata' could be null (see line 1885)
Driver should be consistent, so assume device can be matched via
platform bus and of_device_get_match_data() can indeed return NULL.
This is also possible with malformed DTS on OF-platform: no unit address
and device node name matching driver name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250501-n-smatch-fixes-v2-3-d2ad9c1f2e67@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
gpiod_get_array_optional() for spk-id GPIOs can return NULL, if they are
missing, so do not pass the value to PTR_ERR but instead explicitly
treat NULL as acceptable condition. The old code was correct, but
misleading because PTR_ERR usually is used on errors.
Reported by Smatch:
drivers/spi/spi-cs42l43.c:241 cs42l43_get_speaker_id_gpios() warn: passing zero to 'PTR_ERR'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250501-n-smatch-fixes-v2-2-d2ad9c1f2e67@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On dma_request_chan() failure driver NULL-ifies the 'rx_chan' and
immediately uses it as PTR_ERR() so dev_err_probe() prints incorrect
error code. Rework the code so proper error code will be printed and
NULL-ifying of 'rx_chan' will happen in common error handling block
(failure of DMA setup is not fatal for the driver and further code
depends on 'rx_chan' being non-NULL for DMA operations).
Reported by Smatch:
drivers/spi/atmel-quadspi.c:1287 atmel_qspi_dma_init() warn: passing zero to 'PTR_ERR'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250501-n-smatch-fixes-v2-1-d2ad9c1f2e67@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
spi_test_print_hex_dump() prints buffers holding less than 1024 bytes in
full. Larger buffers are truncated: only the first 512 and the last 512
bytes are printed, separated by a truncation message. The latter is
confusing in case the buffer holds exactly 1024 bytes, as all data is
printed anyway.
Fix this by printing buffers holding up to and including 1024 bytes in
full.
Fixes: 84e0c4e5e2 ("spi: add loopback test driver to allow for spi_master regression tests")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/37ee1bc90c6554c9347040adabf04188c8f704aa.1746184171.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver support was added without selecting the codec, which leads to
a link failure:
aarch64-linux-ld: sound/soc/mediatek/mt8188/mt8188-mt6359.o: in function `mt8188_mt6359_init':
mt8188-mt6359.c:(.text+0x19f0): undefined reference to `mt6359_accdet_enable_jack_detect'
Fixes: f35d834d67 ("ASoC: mediatek: mt8188-mt6359: Add accdet headset jack detect support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250505052106.1811802-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As padlock-sha is block-only, it needs to use core import and
export on the fallback.
Also call sha256_block_init instead of sha256_init although this
is harmless as sha256_init doesn't write into the partial block
area.
Fixes: 63dc06cd12 ("crypto: padlock-sha - Use API partial block handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add crypto_ahash_export_core and crypto_ahash_import_core. For
now they only differ from the normal export/import functions when
going through shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As sync ahash algorithms (currently there are none) are used without
a fallback, ensure that they obey the MAX_SYNC_HASH_REQSIZE rule
just like shash algorithms.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all shash algorithms have converted over to the generic
export format, limit the shash state size to HASH_MAX_STATESIZE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zynqmp-sha partial block was based on an old design of the
partial block API where the leftover calculation was done in the
Crypto API. As the leftover calculation is now done by the
algorithm, fix this by passing the partial blocks to the fallback.
Also zero the stack descriptors.
Fixes: 201e9ec3b6 ("crypto: zynqmp-sha - Use API partial block handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace devm_kzalloc that has an internal multiplication with
devm_kcalloc to improve code readability and safety from overflows.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
`sizeof(char)` evaluates to 1. Remove the churn.
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the shash partial block API by default. Add a separate set
of lib shash algorithms to preserve testing coverage until lib/sha256
has its own tests.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the BLOCK_HASH_UPDATE_BLOCKS helper instead of duplicating
partial block handling.
Also remove the unused lib/sha256 force-generic interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD and a SIMD block function
so that the caller can decide whether to use SIMD.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the block functions as GPL only, there is no reason
to let arbitrary modules use these internal functions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The shash interface already handles partial blocks, use it for
sha224-generic and sha256-generic instead of going through the
lib/sha256 interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an internal sha256_finup helper and move the finalisation code
from __sha256_final into it.
Also add sha256_choose_blocks and CRYPTO_ARCH_HAVE_LIB_SHA256_SIMD
so that the Crypto API can use the SIMD block function unconditionally.
The Crypto API must not be used in hard IRQs and there is no reason
to have a fallback path for hardirqs.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace pm_runtime_get_sync() usage with pm_runtime_resume_and_get() to
simplify error handling.
This is recommended in the documentation of pm_runtime_get_sync().
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The pm_runtime_use_autosuspend() call must be undone with
pm_runtime_dont_use_autosuspend() at driver exit, but this is not
currently handled in the driver.
To fix this issue and at the same time simplify error handling, switch
to devm_pm_runtime_enable(). It will call both pm_runtime_disable() and
pm_runtime_dont_use_autosuspend() during driver removal.
Fixes: 06f751b613 ("crypto: allwinner - Add sun8i-ce Crypto Engine")
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As chaining has been removed, all that remains of REQ_CHAIN is
just virtual address support. Rename it before the reintroduction
of batching creates confusion.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The folios contain references to the request itself so they must
be setup again in the cloned request.
Fixes: 5f3437e9c8 ("crypto: acomp - Simplify folio handling")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Rockchip RK3576 SoC uses a new hardware random number generator IP.
It's also used on the Rockchip RK3562 and the Rockchip RK3528.
It has several modes of operation and self-checking features that are
not implemented here. For starters, it has a DRNG output, which is an
AES-CTR pseudo-random number generator that can be reseeded from the
true entropy regularly.
However, it also allows for access of the true entropy generator
directly. This entropy is generated from an oscillator.
There are several configuration registers which we don't touch here. The
oscillator can be switched between a "CRO" and "STR" oscillator, and the
length of the oscillator can be configured.
The hardware also supports some automatic continuous entropy quality
checking, which is also not implemented in this driver for the time
being.
The output as-is has been deemed sufficient to be useful:
rngtest: starting FIPS tests...
rngtest: bits received from input: 20000032
rngtest: FIPS 140-2 successes: 997
rngtest: FIPS 140-2 failures: 3
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 1
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 1
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=17.050; avg=1897.272;
max=19531250.000)Kibits/s
rngtest: FIPS tests speed: (min=44.773; avg=71.179; max=96.820)Mibits/s
rngtest: Program run time: 11760715 microseconds
rngtest: bits received from input: 40000032
rngtest: FIPS 140-2 successes: 1997
rngtest: FIPS 140-2 failures: 3
rngtest: FIPS 140-2(2001-10-10) Monobit: 0
rngtest: FIPS 140-2(2001-10-10) Poker: 1
rngtest: FIPS 140-2(2001-10-10) Runs: 1
rngtest: FIPS 140-2(2001-10-10) Long run: 1
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=17.050; avg=1798.618;
max=19531250.000)Kibits/s
rngtest: FIPS tests speed: (min=44.773; avg=64.561; max=96.820)Mibits/s
rngtest: Program run time: 23507723 microseconds
Stretching the entropy can then be left up to Linux's actual entropy
pool.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The RK3576 SoC contains another standalone TRNG implementation. While
the register map and hardware is different, it has the same
clocks/interrupts/resets as the RK3588's TRNG, so can go in the same
binding.
Add the compatible and generalise the title/description of the binding
some more.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current documentation states that crypto_rng_alg() returns the cra_name of
the rng algorithm, but it actually returns a 'struct rng_alg' pointer from
a RNG handle.
Update documentation to reflect this.
Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a new driver, qat_6xxx, to support QAT GEN6 devices.
QAT GEN6 devices are a follow-on generation of GEN4 devices and
differently from the previous generation, they can support all three
services (symmetric, asymmetric, and data compression) concurrently.
In order to have the qat_6xxx driver to reuse some of the GEN4 logic,
a new abstraction layer has been introduced to bridge the two
implementations. This allows to avoid code duplication and to keep the
qat_6xxx driver isolated from the GEN4 logic. This approach has been
used for the PF to VF logic and the HW CSR access logic.
Signed-off-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Co-developed-by: George Abraham P <george.abraham.p@intel.com>
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Co-developed-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Signed-off-by: Karthikeyan Gopal <karthikeyan.gopal@intel.com>
Co-developed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add firmware headers related to compression that define macros for
building the hardware configuration word, along with bitfields related
to algorithm settings.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the firmware API to have partial decomp as an argument.
Modify the firmware descriptor to support auto-select best and partial
decompress.
Define the maximal auto-select best value.
Define the mask and bit position for the partial decompress field in the
firmware descriptor.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the function adf_init_admin_pm() as it will be used by the
qat_6xxx driver to send the power management initialization messages
to the firmware.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The functions related to compression and crypto configurations were
previously declared static, restricting the visibility to the defining
source file. Remove the static qualifier, allowing it to be used in other
files as needed. This is necessary for sharing this configuration functions
with other QAT generations.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Export the function adf_get_service_mask() as it will be used by the
qat_6xxx driver to configure the device.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the QAT GEN6 devices in the firmware loader.
This includes handling firmware images signed with the RSA 3K and the
XMSS algorithms.
Co-developed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Jack Xu <jack.xu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current implementation is designed to support single FW signing
authentication only.
Refactor the implementation to support other FW signing methods.
This does not include any functional change.
Co-developed-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Signed-off-by: Jack Xu <jack.xu@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add pr_fmt() to qat uclo.c logging and update the debug and error messages
to utilize it accordingly.
This does not introduce any functional changes.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The logic that generates the compression templates, which are used by to
submit compression requests to the QAT device, is very similar between
QAT devices and diverges mainly on the HW generation-specific
configuration word.
This makes the logic that generates the compression and decompression
templates common between GEN2 and GEN4 devices and abstracts the
generation-specific logic to the generation-specific implementations.
The adf_gen2_dc.c and adf_gen4_dc.c have been replaced by adf_dc.c, and
the generation-specific logic has been reduced and moved to
adf_gen2_hw_data.c and adf_gen4_hw_data.c.
This does not introduce any functional change.
Co-developed-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Vijay Sundar Selvamani <vijay.sundar.selvamani@intel.com>
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename adf_gen4_timer.c to adf_timer.c and adf_gen4_timer.h to
adf_timer.h to make the files generation-agnostic. This includes
renaming the start() and stop() timer APIs and macro definitions
to be generic, allowing for reuse across different device
generations.
This does not introduce any functional changes.
Signed-off-by: George Abraham P <george.abraham.p@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
