Remove disable-wp flag for eMMC nodes since this flag is
only applicable to SD according to the binding doc
(mmc/mmc-controller-common.yaml).
For eMMC, this flag should be ignored but lets remove
anyways to cleanup sdhci nodes.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-4-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
EMMC device is non-removable so add 'non-removable' DT
property to avoid having to redetect the eMMC after
suspend/resume.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-3-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The bootph-all flag was introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across
different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander
nodes, gpio nodes, and MMC nodes need to be present in all boot
stages, so add missing bootph-all phase flag to these nodes to
support SD boot and eMMC boot.
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://lore.kernel.org/r/20250429151454.4160506-2-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Christian Brauner <brauner@kernel.org> says:
Give userspace a way to instruct the kernel to install a pidfd for the
crashing process into the process started as a usermode helper. There's
still tricky race-windows that cannot be easily or sometimes not closed
at all by userspace. There's various ways like looking at the start time
of a process to make sure that the usermode helper process is started
after the crashing process but it's all very very brittle and fraught
with peril.
The crashed-but-not-reaped process can be killed by userspace before
coredump processing programs like systemd-coredump have had time to
manually open a PIDFD from the PID the kernel provides them, which means
they can be tricked into reading from an arbitrary process, and they run
with full privileges as they are usermode helper processes.
Even if that specific race-window wouldn't exist it's still the safest
and cleanest way to let the kernel provide the pidfd directly instead of
requiring userspace to do it manually. In parallel with this commit we
already have systemd adding support for this in [1].
When the usermode helper process is forked we install a pidfd file
descriptor three into the usermode helper's file descriptor table so
it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed yet and even if this @current isn't the actual thread-group
leader we know that the thread-group leader cannot be reaped until
@current has exited.
[1]: https://github.com/systemd/systemd/pull/37125
* patches from https://lore.kernel.org/20250414-work-coredump-v2-0-685bf231f828@kernel.org:
coredump: hand a pidfd to the usermode coredump helper
coredump: fix error handling for replace_fd()
pidfs: move O_RDWR into pidfs_alloc_file()
Link: https://lore.kernel.org/20250414-work-coredump-v2-0-685bf231f828@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Give userspace a way to instruct the kernel to install a pidfd into the
usermode helper process. This makes coredump handling a lot more
reliable for userspace. In parallel with this commit we already have
systemd adding support for this in [1].
We create a pidfs file for the coredumping process when we process the
corename pattern. When the usermode helper process is forked we then
install the pidfs file as file descriptor three into the usermode
helpers file descriptor table so it's available to the exec'd program.
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is empty
and can thus always use three as the file descriptor number.
Note, that we'll install a pidfd for the thread-group leader even if a
subthread is calling do_coredump(). We know that task linkage hasn't
been removed due to delay_group_leader() and even if this @current isn't
the actual thread-group leader we know that the thread-group leader
cannot be reaped until @current has exited.
Link: https://github.com/systemd/systemd/pull/37125 [1]
Link: https://lore.kernel.org/20250414-work-coredump-v2-3-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The replace_fd() helper returns the file descriptor number on success
and a negative error code on failure. The current error handling in
umh_pipe_setup() only works because the file descriptor that is replaced
is zero but that's pretty volatile. Explicitly check for a negative
error code.
Link: https://lore.kernel.org/20250414-work-coredump-v2-2-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since all pidfds must be O_RDWR currently enfore that directly in the
file allocation function itself instead of letting callers specify it.
Link: https://lore.kernel.org/20250414-work-coredump-v2-1-685bf231f828@kernel.org
Tested-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nam Cao <namcao@linutronix.de> says:
While trying the coredump test on qemu-system-riscv64, I observed test
failures for various reasons.
This series makes the test works on qemu-system-riscv64.
* patches from https://lore.kernel.org/cover.1744383419.git.namcao@linutronix.de:
selftests: coredump: Raise timeout to 2 minutes
selftests: coredump: Fix test failure for slow machines
selftests: coredump: Properly initialize pointer
Link: https://lore.kernel.org/cover.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The test's runtime (nearly 20s) is dangerously close to the limit (30s) on
qemu-system-riscv64:
$ time ./stackdump_test > /dev/null
real 0m19.210s
user 0m0.077s
sys 0m0.359s
There could be machines slower than qemu-system-riscv64. Therefore raise
the test timeout to 2 minutes to be safe.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/dd636084d55e7828782728d087fa2298dcab1c8b.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The test waits for coredump to finish by busy-waiting for the stack_values
file to be created. The maximum wait time is 10 seconds.
This doesn't work for slow machine (qemu-system-riscv64), because coredump
takes longer.
Fix it by waiting for the crashing child process to finish first.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/ee657f3fc8e19657cf7aaa366552d6347728f371.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The buffer pointer "line" is not initialized. This pointer is passed to
getline().
It can still work if the stack is zero-initialized, because getline() can
work with a NULL pointer as buffer.
But this is obviously broken. This bug shows up while running the test on a
riscv64 machine.
Fix it by properly initializing the pointer.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/4fb9b6fb3e0040481bacc258c44b4aab5c4df35d.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
After commit 0a65bc27bd ("eventpoll: Set epoll timeout if it's in
the future"), the following program would immediately enter a busy
loop in the kernel:
```
int main() {
int e = epoll_create1(0);
struct epoll_event event = {.events = EPOLLIN};
epoll_ctl(e, EPOLL_CTL_ADD, 0, &event);
const struct timespec timeout = {.tv_nsec = 1};
epoll_pwait2(e, &event, 1, &timeout, 0);
}
```
This happens because the given (non-zero) timeout of 1 nanosecond
usually expires before ep_poll() is entered and then
ep_schedule_timeout() returns false, but `timed_out` is never set
because the code line that sets it is skipped. This quickly turns
into a soft lockup, RCU stalls and deadlocks, inflicting severe
headaches to the whole system.
When the timeout has expired, we don't need to schedule a hrtimer, but
we should set the `timed_out` variable. Therefore, I suggest moving
the ep_schedule_timeout() check into the `timed_out` expression
instead of skipping it.
brauner: Note that there was an earlier fix by Joe Damato in response to
my bug report in [1].
Fixes: 0a65bc27bd ("eventpoll: Set epoll timeout if it's in the future")
Cc: Joe Damato <jdamato@fastly.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/20250429153419.94723-1-jdamato@fastly.com [1]
Link: https://lore.kernel.org/20250429185827.3564438-1-max.kellermann@ionos.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ring buffer size varies across VMBus channels. The size of sysfs
node for the ring buffer is currently hardcoded to 4 MB. Userspace
clients either use fstat() or hardcode this size for doing mmap().
To address this, make the sysfs node size dynamic to reflect the
actual ring buffer size for each channel. This will ensure that
fstat() on ring sysfs node always returns the correct size of
ring buffer.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-3-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On regular bootup, devices get registered to VMBus first, so when
uio_hv_generic driver for a particular device type is probed,
the device is already initialized and added, so sysfs creation in
hv_uio_probe() works fine. However, when the device is removed
and brought back, the channel gets rescinded and the device again gets
registered to VMBus. However this time, the uio_hv_generic driver is
already registered to probe for that device and in this case sysfs
creation is tried before the device's kobject gets initialized
completely.
Fix this by moving the core logic of sysfs creation of ring buffer,
from uio_hv_generic to HyperV's VMBus driver, where the rest of the
sysfs attributes for the channels are defined. While doing that, make
use of attribute groups and macros, instead of creating sysfs
directly, to ensure better error handling and code flow.
Problematic path:
vmbus_process_offer (A new offer comes for the VMBus device)
vmbus_add_channel_work
vmbus_device_register
|-> device_register
| |...
| |-> hv_uio_probe
| |...
| |-> sysfs_create_bin_file (leads to a warning as
| the primary channel's kobject, which is used to
| create the sysfs file, is not yet initialized)
|-> kset_create_and_add
|-> vmbus_add_channel_kobj (initialization of the primary
channel's kobject happens later)
Above code flow is sequential and the warning is always reproducible in
this path.
Fixes: 9ab877a6cc ("uio_hv_generic: make ring buffer attribute for primary channel")
Cc: stable@kernel.org
Suggested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250502074811.2022-2-namjain@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The folio_index() helper is only needed for mixed usage of page cache
and swap cache, for pure page cache usage, the caller can just use
folio->index instead.
It can't be a swap cache folio here. Swap mapping may only call into fs
through 'swap_rw' but btrfs does not use that method for swap.
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 7e06de7c83.
Commit 7e06de7c83 ("btrfs: canonicalize the device path before adding
it") tries to make btrfs to use "/dev/mapper/*" name first, then any
filename inside "/dev/" as the device path.
This is mostly fine when there is only the root namespace involved, but
when multiple namespace are involved, things can easily go wrong for the
d_path() usage.
As d_path() returns a file path that is namespace dependent, the
resulted string may not make any sense in another namespace.
Furthermore, the "/dev/" prefix checks itself is not reliable, one can
still make a valid initramfs without devtmpfs, and fill all needed
device nodes manually.
Overall the userspace has all its might to pass whatever device path for
mount, and we are not going to win the war trying to cover every corner
case.
So just revert that commit, and do no extra d_path() based file path
sanity check.
CC: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/linux-fsdevel/20250115185608.GA2223535@zen.localdomain/
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When trying read-only scrub on a btrfs with rescue=idatacsums mount
option, it will crash with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000208
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
CPU: 1 UID: 0 PID: 835 Comm: btrfs Tainted: G O 6.15.0-rc3-custom+ #236 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:btrfs_lookup_csums_bitmap+0x49/0x480 [btrfs]
Call Trace:
<TASK>
scrub_find_fill_first_stripe+0x35b/0x3d0 [btrfs]
scrub_simple_mirror+0x175/0x290 [btrfs]
scrub_stripe+0x5f7/0x6f0 [btrfs]
scrub_chunk+0x9a/0x150 [btrfs]
scrub_enumerate_chunks+0x333/0x660 [btrfs]
btrfs_scrub_dev+0x23e/0x600 [btrfs]
btrfs_ioctl+0x1dcf/0x2f80 [btrfs]
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x4f/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[CAUSE]
Mount option "rescue=idatacsums" will completely skip loading the csum
tree, so that any data read will not find any data csum thus we will
ignore data checksum verification.
Normally call sites utilizing csum tree will check the fs state flag
NO_DATA_CSUMS bit, but unfortunately scrub does not check that bit at all.
This results in scrub to call btrfs_search_slot() on a NULL pointer
and triggered above crash.
[FIX]
Check both extent and csum tree root before doing any tree search.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
num_extent_folios() unconditionally calls folio_order() on
eb->folios[0]. If that is NULL this will be a segfault. It is reasonable
for it to return 0 as the number of folios in the eb when the first
entry is NULL, so do that instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation for making the kmalloc() family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct folio **" but the returned type will be
"struct page **". These are the same allocation size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jakub Kicinski says:
====================
tools: ynl-gen: additional C types and classic netlink handling
This series is a bit of a random grab bag adding things we need
to generate code for rt-link.
First two patches are pretty random code cleanups.
Patch 3 adds default values if the spec is missing them.
Patch 4 adds support for setting Netlink request flags
(NLM_F_CREATE, NLM_F_REPLACE etc.). Classic netlink uses those
quite a bit.
Patches 5 and 6 extend the notification handling for variations
used in classic netlink. Patch 6 adds support for when notification
ID is the same as the ID of the response message to GET.
Next 4 patches add support for handling a couple of complex types.
These are supported by the schema and Python but C code gen wasn't
there.
Patch 11 is a bit of a hack, it skips code related to kernel
policy generation, since we don't need it for classic netlink.
Patch 12 adds support for having different fixed headers per op.
Something we could avoid in previous rtnetlink specs but some
specs do mix.
v2: https://lore.kernel.org/20250425024311.1589323-1-kuba@kernel.org
v1: https://lore.kernel.org/20250424021207.1167791-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250429154704.2613851-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rtnetlink has variety of ops with different fixed headers.
Detect that op fixed header is not the same as family one,
and use sizeof() directly. For reverse parsing we need to
pass the fixed header len along the policy (in the socket
state).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-13-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rt-link has a vlan-protocols enum with:
name: 8021q value: 33024
name: 8021ad value: 34984
It's nice to have, since it converts the values to strings in Python.
For C, however, the codegen is trying to use enums to generate strict
policy checks. Parsing such sparse enums is not possible via policies.
Since for classic netlink we don't support kernel codegen and policy
generation - skip the auto-generation of checks from enums.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-12-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
IPv6 addresses are expressed as binary arrays since we don't have u128.
Since they are not variable length, however, they are relatively
easy to represent as an array of known size.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-11-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
C codegen supports ArrayNest AKA indexed-array carrying scalars,
but only for the netlink -> struct parsing. Support rendering
from struct to netlink.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Binary types with struct are fixed size, relatively easy to
handle for multi attr. Declare the member as a pointer.
Count the members, allocate an array, copy in the data.
Allow the netlink attr to be smaller or larger than our view
of the struct in case the build headers are newer or older
than the running kernel.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for multi attr strings (needed for link alt_names).
We record the length individual strings in a len member, to do
the same for multi-attr create a struct ynl_string in ynl.h
and use it as a layer holding both the string and its length.
Since strings may be arbitrary length dynamically allocate each
individual one.
Adjust arg_member and struct member to avoid spacing the double
pointers to get "type **name;" rather than "type * *name;"
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allow CRUD-style notification where the notification is more
like the response to the request, which can optionally be
looped back onto the requesting socket. Since the notification
and request are different ops in the spec, for example:
-
name: delrule
doc: Remove an existing FIB rule
attribute-set: fib-rule-attrs
do:
request:
value: 33
attributes: *fib-rule-all
-
name: delrule-ntf
doc: Notify a rule deletion
value: 33
notify: getrule
We need to find the request by ID. Ideally we'd detect this model
from the spec properties, rather than assume that its what all
classic netlink families do. But maybe that'd cause this model
to spread and its easy to get wrong. For now assume CRUD == classic.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-7-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Classic Netlink has GET callbacks with no doit support, just dumps.
Support using their responses in notifications. If notification points
at a type which only has a dump - use the dump's type.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Classic netlink makes extensive use of flags. Support specifying
them the same way as attributes are specified (using a helper),
for example:
rt_link_newlink_req_set_nlflags(req, NLM_F_CREATE | NLM_F_ECHO);
Wrap the code up in a RenderInfo predicate. I think that some
genetlink families may want this, too. It should be easy to
add a spec property later.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The C codegen refers to op attribute lists all over the place,
without checking if they are present, even tho attribute list
is technically an optional property. Add them automatically
at init if missing so that we don't have to make specs longer.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of walking the entries in the code gen add a method
for the struct class to return if any of the members need
an iterator.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dict stores struct objects (of class Struct), not just
a trivial set with directions.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250429154704.2613851-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While we add an OF-provider we may, based upon a specific condition, also
assign genpd->opp_table. Rather using the same specific condition in the
error/remove path, let's check genpd->opp_table instead as it makes the
code easier.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250417142513.312939-4-ulf.hansson@linaro.org
Rather than using two if-clauses immediately after each to check for
similar reasons to prevent the power-off, let's combine them into one
if-clause to simplify the code.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250417142513.312939-3-ulf.hansson@linaro.org
At some point it made sense to have genpd_power_off() to return an error
code. That hasn't been the case for quite some time, so let's convert it
into a static void function and simplify some of the corresponding code.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250417142513.312939-2-ulf.hansson@linaro.org
The driver specific HDCP GSC code will eventually be part of the driver
cores rather than display. Remove the struct intel_display references
from them, and pass struct drm_device instead.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/bf9aa8e44e18eef41e3077a2966935b4e2649b62.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The opaque HDCP GSC context nicely abstracts the differences between
drivers. Pass that instead of struct drm_i915_private or struct
xe_device to intel_hdcp_gsc_msg_send(). We can store the driver specific
data in the context.
This lets us drop the dependency on i915_drv.h from
intel_hdcp_gsc_message.c.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/df1653212f9014e717701b017e78e0017884b870.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Allocate and initialize the HDCP GSC message in
intel_hdcp_gsc_hdcp2_init() as before, but store the pointer to
display->hdcp.hdcp_message in the caller. Similarly, pass in the pointer
to intel_hdcp_gsc_free_message().
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/a74fcc941126bf92d12115b5faf4f75099e26242.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The gsc_hdcp_ops is duplicated and initialized exactly the same way in
two different places (for i915 and xe), and requires forward
declarations for all the hooks. Deduplicate, and make the functions
static.
There are slight differences in the i915 and xe implementations of
intel_hdcp_gsc_init() and intel_hdcp_gsc_fini(). Take the best of both,
and improve.
We need to expose intel_hdcp_gsc_hdcp2_init() and
intel_hdcp_gsc_free_message() for this, and create the latter for xe.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/21e7871b35d4c7d13f016b5ecb4f10e5be72c531.1745524803.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We haven't updated the DRIVER_TIMESTAMP since commit 3570bd989a
("drm/i915: Update DRIVER_DATE to 20230929") 1½ years ago. Before then,
the previous update was commit 139caf7ca2 ("drm/i915: Update
DRIVER_DATE to 20201103") 4+ years ago. The DRIVER_DATE has also been
removed altogether.
We've used the DRIVER_TIMESTAMP to log suggestions to file bugs on GPU
hangs when they happen on a driver less than six months old. Combined
with the sporadic DRIVER_TIMESTAMP updates, we really haven't logged the
suggestions for years.
Just stop logging the suggestion to file bugs altogether, and remove
DRIVER_TIMESTAMP. This doesn't really change anything wrt to logging GPU
errors or how we handle bugs. And effectively we already stopped logging
the message a year ago when we stopped updating DRIVER_TIMESTAMP.
Instead, add an unconditional message about the GPU error state
location.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429115055.2133143-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Drop the FDO_BUG_URL from the source, and stop suggesting to file bugs
on DPCD backlight issues. We don't do this anywhere else in display,
this isn't a special snowflake.
As a consequence, also drop the dependency on i915_utils.h from
intel_dp_aux_backlight.c.
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20250429112534.2121656-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
