Assign the ptype extracted from qword to the ptype field of struct
libeth_rqe_info.
Remove the now excess ptype param of idpf_rx_singleq_extract_fields(),
idpf_rx_singleq_extract_base_fields() and
idpf_rx_singleq_extract_flex_fields().
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Provide support for the following devlink cmds:
-DEVLINK_CMD_REGION_GET
-DEVLINK_CMD_REGION_NEW
-DEVLINK_CMD_REGION_DEL
-DEVLINK_CMD_REGION_READ
ixgbe devlink region implementation, similarly to the ice one,
lets user to create snapshots of content of Non Volatile Memory,
content of Shadow RAM, and capabilities of the device.
For both NVM and SRAM regions provide .read() handler to let user
read their contents without the need to create full snapshots.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Legacy implementation of .set_phys_id() ethtool callback is not
applicable for E610 device.
Add new implementation which uses 0x06E9 command by calling
ixgbe_aci_set_port_id_led().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E610 device doesn't support disabling FC autonegotiation.
Create dedicated E610 .set_pauseparam() implementation and assign
it to ixgbe_ethtool_ops_e610.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently only APM (Advanced Power Management) is supported by
the ixgbe driver. It works for magic packets only, as for different
sources of wake-up E610 adapter utilizes different feature.
Add E610 specific implementation of ixgbe_set_wol() callback. When
any of broadcast/multicast/unicast wake-up is set, disable APM and
configure ACPI (Advanced Configuration and Power Interface).
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E610's implementation of various ethtool ops is different than
the ones corresponding to ixgbe legacy products. Therefore create
separate E610 ethtool_ops struct which will be filled out in the
forthcoming patches.
Add adequate ops struct basing on MAC type. This step requires
changing a bit the flow of probing by placing ixgbe_set_ethtool_ops
after hw.mac.type is assigned. So move the whole netdev assignment
block after hw.mac.type is known. This step doesn't have any additional
impact on probing sequence.
Suggested-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current MQPRIO offload implementation uses the legacy TSN Tx mode. In
this mode the hardware uses four packet buffers and considers queue
priorities.
In order to harmonize the TAPRIO implementation with MQPRIO, switch to the
regular TSN Tx mode. This mode also uses four packet buffers and considers
queue priorities. In addition to the legacy mode, transmission is always
coupled to Qbv. The driver already has mechanisms to use a dummy schedule
of 1 second with all gates open for ETF. Simply use this for MQPRIO too.
This reduces code and makes it easier to add support for frame preemption
later.
Tested on i225 with real time application using high priority queue, iperf3
using low priority queue and network TAP device.
Acked-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Limit netdev_tc calls to MQPRIO. Currently these calls are made in
igc_tsn_enable_offload() and igc_tsn_disable_offload() which are used by
TAPRIO and ETF as well. However, these are only required for MQPRIO.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When running the igc with XDP/ZC in busy polling mode with deferral of hard
interrupts, interrupts still happen from time to time. That is caused by
the igb task watchdog which triggers Rx interrupts periodically.
That mechanism has been introduced to overcome skb/memory allocation
failures [1]. So the Rx clean functions stop processing the Rx ring in case
of such failure. The task watchdog triggers Rx interrupts periodically in
the hope that memory became available in the mean time.
The current behavior is undesirable for real time applications, because the
driver induced Rx interrupts trigger also the softirq processing. However,
all real time packets should be processed by the application which uses the
busy polling method.
Therefore, only trigger the Rx interrupts in case of real allocation
failures. Introduce a new flag for signaling that condition.
Follow the same logic as in commit 8dcf2c2120 ("igc: Get rid of spurious
interrupts").
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Sweta Kumari <sweta.kumari@intel.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use netif_napi_add_config() to assign persistent per-NAPI config.
This is useful for preserving NAPI settings when changing queue counts or
for user space programs using SO_INCOMING_NAPI_ID.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Pegatron Chagall is an Android tablet utilizing a customized Cypress
CG7153AM microcontroller (MCU) as its battery fuel gauge. It supports a
single-cell battery and features a dual-color charging LED.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://lore.kernel.org/r/20250429061803.9581-4-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
PEGATRON Corporation is a Taiwanese electronics manufacturing company that
mainly develops computing, communications and consumer electronics for
branded vendors. Link https://www.pegatroncorp.com/
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250429061803.9581-2-clamor95@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Replace an on-stack definition of a flexible structure with a call
to utility function cros_ec_cmd().
So, with these changes, fix the following warning:
drivers/power/supply/cros_charge-control.c:57:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/aBEwnKtUOTYzS7C3@kspp
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If any address or port is changed, update it in all packets and recalculate
checksum.
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250426153210.14044-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When `CONFIG_AUXILIARY_BUS` is disabled, `parent()` is still dead code:
error: method `parent` is never used
--> rust/kernel/device.rs:71:19
|
64 | impl<Ctx: DeviceContext> Device<Ctx> {
| ------------------------------------ method in this implementation
...
71 | pub(crate) fn parent(&self) -> Option<&Self> {
| ^^^^^^
|
= note: `-D dead-code` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(dead_code)]`
Thus reintroduce the `expect`, but now as a conditional one. Do so as
`dead_code` since that is narrower.
An `allow` would also be possible, but Danilo wants to catch new users
in the future [1].
Link: https://lore.kernel.org/rust-for-linux/aBE8qQrpXOfru_K3@pollux/ [1]
Fixes: ce735e73dd ("rust: auxiliary: add auxiliary device / driver abstractions")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lore.kernel.org/r/20250429210629.513521-1-ojeda@kernel.org
[ Adjust commit subject to "rust: device: conditionally expect
`dead_code` for `parent()`". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Vladimir Oltean says:
====================
Fix Felix DSA taprio gates after clock jump
Richie Pearn presented a reproducible situation where traffic would get
blocked on the NXP LS1028A switch if a certain taprio schedule was
applied, and stepping the PTP clock would take place. The latter event
is an expected initial occurrence, but also at runtime, for example when
transitioning from one grandmaster to another.
The issue is completely described in patch 1/4, which also contains
the fix, but it has left me with some doubts regarding the need for
vsc9959_tas_clock_adjust() in general.
In order to prove to myself that vsc9959_tas_clock_adjust() is needed in
general, I have written a selftest for the tc-taprio data path in patch
4/4. On the LS1028A, we can clearly see the following failures without
that function:
INFO: Forcing a backward clock jump
TEST: ping [FAIL]
INFO: Setting up taprio after PTP
TEST: In band with gate [FAIL]
Reception of 100 packets failed
TEST: Out of band with gate [FAIL]
Reception of 100 packets failed
As for testing my fix from patch 1/4, that was quite a bit more complex
to do automatically. In fact, I couldn't find any other schedule that
would fail to be updated by vsc9959_tas_clock_adjust() as cleanly as
the schedule from Richie, so I've added that specific schedule as the
test_clock_jump_backward() test.
The test ordering is also (unfortunately) very strategic. Running the
selftest to the end dirties the GCL RAM, and when running
test_clock_jump_backward() once again, the GCL entries won't be all
zeroes as they were the first time around. They will contain bits and
pieces of old schedules, making it very challenging to make it fail.
Thus, test_clock_jump_backward() is the first in the test suite, and
without patch 1/4, it is only supposed to fail the _first_ time when
running after a clean boot.
====================
Link: https://patch.msgid.link/20250426144859.3128352-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a forwarding path test for tc-taprio, based on isochron. This is
specifically intended for NICs with an offloaded data path (switchdev/DSA)
and requires taprio 'flags 2'. Also, $h1 and $h2 must support hardware
timestamping, and $h1 tc-etf offload, for isochron to work.
Packets received by a switch while the egress port has a taprio schedule
with an open gate for the traffic class must be sent right away.
Packets received by the switch while the traffic class gate must be
delayed until it opens.
Packets received by the switch must be dropped if the gate for the
traffic class never opens.
Packets should pass if the maximum SDU for the traffic class allows it,
and should be dropped otherwise.
The schedule should auto-update itself if clock jumps take place while
taprio is installed. Repeat most of the above tests after forcing two
clock jumps, one backwards (in Jan 1970) and one back into the present.
Symlink it from tools/testing/selftests/drivers/net/dsa, because usually
DSA ports have the same MAC address, and we need STABLE_MAC_ADDRS=yes
from its forwarding.config for the test to run successfully.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allowing the
window size to be customized by isochron_do().
From man isochron-send, the window size alters the advance time (the
delta between the transmission time of the packet, and its expected TX
time when using SO_TXTIME or tc-taprio on the sender). In absence of the
argument, isochron-send defaults to maximizing the advance time (making
it equal to the cycle length).
The default behavior is exactly what is problematic. An advance time
that is too large will make packets intended to be out-of-band still be
potentially in-band with an open gate from the schedule's previous cycle.
We need to allow that advance time to be reduced.
Perhaps a bit confusingly, isochron_do() has a shift_time argument
currently, but that does not help here. The shift time shifts both the
user space wakeup time and the expected TX time by equal amounts, it is
unable of bringing them closer to one another.
Set the window size properly for the Ocelot PSFP selftest as well.
That used to work due to a very carefully chosen SHIFT_TIME_NS.
I've re-tested that the test still works properly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This snippet will be necessary for a future isochron-based test, so
provide a simpler high-level interface for counting the received
packets.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplest setup to reproduce the issue: connect 2 ports of the
LS1028A-RDB together (eno0 with swp0) and run:
$ ip link set eno0 up && ip link set swp0 up
$ tc qdisc replace dev swp0 parent root handle 100 taprio num_tc 8 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 map 0 1 2 3 4 5 6 7 \
base-time 0 sched-entry S 20 300000 sched-entry S 10 200000 \
sched-entry S 20 300000 sched-entry S 48 200000 \
sched-entry S 20 300000 sched-entry S 83 200000 \
sched-entry S 40 300000 sched-entry S 00 200000 flags 2
$ ptp4l -i eno0 -f /etc/linuxptp/configs/gPTP.cfg -m &
$ ptp4l -i swp0 -f /etc/linuxptp/configs/gPTP.cfg -m
One will observe that the PTP state machine on swp0 starts
synchronizing, then it attempts to do a clock step, and after that, it
never fails to recover from the condition below.
ptp4l[82.427]: selected best master clock 00049f.fffe.05f627
ptp4l[82.428]: port 1 (swp0): MASTER to UNCALIBRATED on RS_SLAVE
ptp4l[83.252]: port 1 (swp0): UNCALIBRATED to SLAVE on MASTER_CLOCK_SELECTED
ptp4l[83.886]: rms 4537731277 max 9075462553 freq -18518 +/- 11467 delay 818 +/- 0
ptp4l[84.170]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[84.171]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[84.172]: port 1 (swp0): send peer delay request failed
ptp4l[84.173]: port 1 (swp0): clearing fault immediately
ptp4l[84.269]: port 1 (swp0): SLAVE to LISTENING on INIT_COMPLETE
ptp4l[85.303]: timed out while polling for tx timestamp
ptp4l[85.304]: increasing tx_timestamp_timeout or increasing kworker priority may correct this issue, but a driver bug likely causes it
ptp4l[85.305]: port 1 (swp0): send peer delay response failed
ptp4l[85.306]: port 1 (swp0): clearing fault immediately
ptp4l[86.304]: timed out while polling for tx timestamp
A hint is given by the non-zero statistics for dropped packets which
were expecting hardware TX timestamps:
$ ethtool --include-statistics -T swp0
(...)
Statistics:
tx_pkts: 30
tx_lost: 11
tx_err: 0
We know that when PTP clock stepping takes place (from ocelot_ptp_settime64()
or from ocelot_ptp_adjtime()), vsc9959_tas_clock_adjust() is called.
Another interesting hint is that placing an early return in
vsc9959_tas_clock_adjust(), so as to neutralize this function, fixes the
issue and TX timestamps are no longer dropped.
The debugging function written by me and included below is intended to
read the GCL RAM, after the admin schedule became operational, through
the two status registers available for this purpose:
QSYS_GCL_STATUS_REG_1 and QSYS_GCL_STATUS_REG_2.
static void vsc9959_print_tas_gcl(struct ocelot *ocelot)
{
u32 val, list_length, interval, gate_state;
int i, err;
err = read_poll_timeout(ocelot_read, val,
!(val & QSYS_PARAM_STATUS_REG_8_CONFIG_PENDING),
10, 100000, false, ocelot, QSYS_PARAM_STATUS_REG_8);
if (err) {
dev_err(ocelot->dev,
"Failed to wait for TAS config pending bit to clear: %pe\n",
ERR_PTR(err));
return;
}
val = ocelot_read(ocelot, QSYS_PARAM_STATUS_REG_3);
list_length = QSYS_PARAM_STATUS_REG_3_LIST_LENGTH_X(val);
dev_info(ocelot->dev, "GCL length: %u\n", list_length);
for (i = 0; i < list_length; i++) {
ocelot_rmw(ocelot,
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM(i),
QSYS_GCL_STATUS_REG_1_GCL_ENTRY_NUM_M,
QSYS_GCL_STATUS_REG_1);
interval = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_2);
val = ocelot_read(ocelot, QSYS_GCL_STATUS_REG_1);
gate_state = QSYS_GCL_STATUS_REG_1_GATE_STATE_X(val);
dev_info(ocelot->dev, "GCL entry %d: states 0x%x interval %u\n",
i, gate_state, interval);
}
}
Calling it from two places: after the initial QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
performed by vsc9959_qos_port_tas_set(), and after the one done by
vsc9959_tas_clock_adjust(), I notice the following difference.
From the tc-taprio process context, where the schedule was initially
configured, the GCL looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 1: states 0x10 interval 200000
mscc_felix 0000:00:00.5: GCL entry 2: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 3: states 0x48 interval 200000
mscc_felix 0000:00:00.5: GCL entry 4: states 0x20 interval 300000
mscc_felix 0000:00:00.5: GCL entry 5: states 0x83 interval 200000
mscc_felix 0000:00:00.5: GCL entry 6: states 0x40 interval 300000
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 200000
But from the ptp4l clock stepping process context, when the
vsc9959_tas_clock_adjust() hook is called, the GCL RAM of the
operational schedule now looks like this:
mscc_felix 0000:00:00.5: GCL length: 8
mscc_felix 0000:00:00.5: GCL entry 0: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 1: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 2: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 3: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 4: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 5: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 6: states 0x0 interval 0
mscc_felix 0000:00:00.5: GCL entry 7: states 0x0 interval 0
I do not have a formal explanation, just experimental conclusions.
It appears that after triggering QSYS_TAS_PARAM_CFG_CTRL_CONFIG_CHANGE
for a port's TAS, the GCL entry RAM is updated anyway, despite what the
documentation claims: "Specify the time interval in
QSYS::GCL_CFG_REG_2.TIME_INTERVAL. This triggers the actual RAM
write with the gate state and the time interval for the entry number
specified". We don't touch that register (through vsc9959_tas_gcl_set())
from vsc9959_tas_clock_adjust(), yet the GCL RAM is updated anyway.
It seems to be updated with effectively stale memory, which in my
testing can hold a variety of things, including even pieces of the
previously applied schedule, for particular schedule lengths.
As such, in most circumstances it is very difficult to pinpoint this
issue, because the newly updated schedule would "behave strangely",
but ultimately might still pass traffic to some extent, due to some
gate entries still being present in the stale GCL entry RAM. It is easy
to miss.
With the particular schedule given at the beginning, the GCL RAM
"happens" to be reproducibly rewritten with all zeroes, and this is
consistent with what we see: when the time-aware shaper has gate entries
with all gates closed, traffic is dropped on TX, no wonder we can't
retrieve TX timestamps.
Rewriting the GCL entry RAM when reapplying the new base time fixes the
observed issue.
Fixes: 8670dc33f4 ("net: dsa: felix: update base time of time-aware shaper when adjusting PTP time")
Reported-by: Richie Pearn <richard.pearn@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 1a931c4f5e ("igc: add lock preventing multiple simultaneous PTM
transactions") added a new mutex to protect concurrent PTM transactions.
This lock is acquired in igc_ptp_reset() in order to ensure the PTM
registers are properly disabled after a device reset.
The flow where the lock is acquired already holds a spinlock, so acquiring
a mutex leads to a sleep-while-locking bug, reported both by smatch,
and the kernel test robot.
The critical section in igc_ptp_reset() does correctly use the
readx_poll_timeout_atomic variants, but the standard PTM flow uses regular
sleeping variants. This makes converting the mutex to a spinlock a bit
tricky.
Instead, re-order the locking in igc_ptp_reset. Acquire the mutex first,
and then the tmreg_lock spinlock. This is safe because there is no other
ordering dependency on these locks, as this is the only place where both
locks were acquired simultaneously. Indeed, any other flow acquiring locks
in that order would be wrong regardless.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 1a931c4f5e ("igc: add lock preventing multiple simultaneous PTM transactions")
Link: https://lore.kernel.org/intel-wired-lan/Z_-P-Hc1yxcw0lTB@stanley.mountain/
Link: https://lore.kernel.org/intel-wired-lan/202504211511.f7738f5d-lkp@intel.com/T/#u
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before the referenced commit, the shutdown just called idpf_remove(),
this way IDPF_REMOVE_IN_PROG was protecting us from the serv_task
rescheduling reset. Without this flag set the shutdown process is
vulnerable to HW reset or any other triggering conditions (such as
default mailbox being destroyed).
When one of conditions checked in idpf_service_task becomes true,
vc_event_task can be rescheduled during shutdown, this leads to accessing
freed memory e.g. idpf_req_rel_vector_indexes() trying to read
vport->q_vector_idxs. This in turn causes the system to become defunct
during e.g. systemctl kexec.
Considering using IDPF_REMOVE_IN_PROG would lead to more heavy shutdown
process, instead just cancel the serv_task before cancelling
adapter->serv_task before cancelling adapter->vc_event_task to ensure that
reset will not be scheduled while we are doing a shutdown.
Fixes: 4c9106f490 ("idpf: fix adapter NULL pointer dereference on reboot")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of failing on rss_data->rss_key allocation the function is
freeing vport without freeing earlier allocated q_vector_idxs. Fix it.
Move from freeing in error branch to goto scheme.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Suggested-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Bui Quang Minh says:
====================
xsk: respect the offsets when copying frags
In commit 560d958c6c ("xsk: add generic XSk &xdp_buff -> skb
conversion"), we introduce a helper to convert zerocopy xdp_buff to skb.
However, in the frag copy, we mistakenly ignore the frag's offset. This
series adds the missing offset when copying frags in
xdp_copy_frags_from_zc(). This function is not used anywhere so no
backport is needed.
This series also makes xdp_copy_frags_from_zc() use page allocation API
page_pool_dev_alloc() instead of page_pool_dev_alloc_netmem() to avoid
possible confusion of the returned value.
====================
Link: https://patch.msgid.link/20250426081220.40689-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit makes xdp_copy_frags_from_zc() use page allocation API
page_pool_dev_alloc() instead of page_pool_dev_alloc_netmem() to avoid
possible confusion of the returned value.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250426081220.40689-3-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 560d958c6c ("xsk: add generic XSk &xdp_buff -> skb
conversion"), we introduce a helper to convert zerocopy xdp_buff to skb.
However, in the frag copy, we mistakenly ignore the frag's offset. This
commit adds the missing offset when copying frags in
xdp_copy_frags_from_zc(). This function is not used anywhere so no
backport is needed.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250426081220.40689-2-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use bpf_try_module_get()/bpf_module_put() instead of try_module_get()/
module_put() when handling default qdisc since users can assign a bpf
qdisc to it.
To trigger the bug:
$ bpftool struct_ops register bpf_qdisc_fq.bpf.o /sys/fs/bpf
$ echo bpf_fq > /proc/sys/net/core/default_qdisc
Fixes: c824034495 ("bpf: net_sched: Support implementation of Qdisc_ops in bpf")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250429192128.3860571-1-ameryhung@gmail.com
The Rockchip RK3576 features two SATA nodes. The first, sata0, is behind
combphy0, which muxes between pcie0 and sata0.
The second, sata1, is behind combphy1, which muxes between pcie1, sata1
and usb_drd1_dwc3.
I've only been able to test sata0 on my board, but it appears to work
just fine.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-2-23ee89c939fe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Someone made a typo when they added the RTC to the Sige5 DTS, which
resulted in it using interrupts from GPIO0 B0 instead of GPIO0 A0. The
pinctrl entry for it wasn't typoed though, curiously enough.
The Sige5 v1.1 schematic was used to verify that GPIO0 A0 is the correct
pin for the RTC wakeup interrupt, so let's change it to that.
Fixes: 40f742b07a ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250429-sige5-rtc-oopsie-v1-1-8686767d0f1f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Convert vf610-clock.txt to yaml format.
Additional changes:
- swap audio_ext and enet_ext to match existed dts order
- remove clock consumer in example
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250411212339.3273202-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Sometimes engine reset fails because the engine resumes from an
incorrect RING_HEAD. Engine head failed to set to zero even after
writing into it. This is a timing issue and we experimented
different values and found out that 20ms delay works best based
on testing.
So, add a 20ms delay to let engine resumes from correct RING_HEAD.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13968
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://lore.kernel.org/r/20250416103640.212269-1-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the CONFIG_NET_SCH_BPF configuration is not enabled,
the BPF test compilation will report the following error:
In file included from progs/bpf_qdisc_fq.c:39:
progs/bpf_qdisc_common.h:17:51: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
17 | void bpf_qdisc_skb_drop(struct sk_buff *p, struct bpf_sk_buff_ptr *to_free) __ksym;
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
309 | struct bpf_sk_buff_ptr *to_free)
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
progs/bpf_qdisc_fq.c:308:5: error: conflicting types for '____bpf_fq_enqueue'
Fixes: 11c701639b ("selftests/bpf: Add a basic fifo qdisc test")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250428033445.58113-1-yangfeng59949@163.com
Merge drm-misc-next to get commit Fixes: fec450ca15 ("drm/display:
hdmi: provide central data authority for ACR params").
Signed-off-by: Rob Clark <robdclark@chromium.org>
The closing parentheses around the read syscall is misplaced, causing
single byte reads from the iterator instead of buf sized reads. While
the end result is the same, many more read calls than necessary are
performed.
$ tools/testing/selftests/bpf/vmtest.sh "./test_progs -t kmem_cache_iter"
145/1 kmem_cache_iter/check_task_struct:OK
145/2 kmem_cache_iter/check_slabinfo:OK
145/3 kmem_cache_iter/open_coded_iter:OK
145 kmem_cache_iter:OK
Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20250428180256.1482899-1-tjmercier@google.com
Add a helper for replacing the contents of bitfield in memory
with the specified value.
Even though a helper xxx_replace_bits() is available, it is not
well documented, and only reports errors at the run time, which
will not be helpful to catch possible overflow errors due to
incorrect parameter types used.
FIELD_MODIFY(REG_FIELD_C, ®, c) is the wrapper to the code below.
reg &= ~REG_FIELD_C;
reg |= FIELD_PREP(REG_FIELD_C, c);
Yury: trim commit message, align backslashes.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
bitmap-str.h is not self-contained, it uses bool type that is provided
in types.h and it uses __user annotation that is guaranteed to be included
with types.h. Add missing header(s) to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The bitmap-str.h uses mixed style for function prototypes. Drop
the 'extern' as it easier to read and makes style aligned with
a new code in the kernel.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
__BUILD_BUG_ON_ZERO_MSG(), as introduced in [1], makes it possible to
do a static assertions in expressions. The direct benefit is to
provide a meaningful error message instead of the cryptic negative
bitfield size error message currently returned by BUILD_BUG_ON_ZERO():
./include/linux/build_bug.h:16:51: error: negative width in bit-field '<anonymous>'
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
Get rid of BUILD_BUG_ON_ZERO()'s bitfield size hack. Instead rely on
__BUILD_BUG_ON_ZERO_MSG() which in turn relies on C11's
_Static_assert().
Use some macro magic, similarly to static_assert(), to either use an
optional error message provided by the user or, when omitted, to
produce a default error message by stringifying the tested
expression. With this, for example:
BUILD_BUG_ON_ZERO(1 > 0)
would now throw:
./include/linux/compiler.h:197:62: error: static assertion failed: "1 > 0 is true"
197 | define __BUILD_BUG_ON_ZERO_MSG(e, msg) ((int)sizeof(struct {_Static_assert(!(e), msg);}))
| ^~~~~~~~~~~~~~
Finally, __BUILD_BUG_ON_ZERO_MSG() is already guarded by an:
#ifdef __CHECKER__
So no need any more for that guard clause for BUILD_BUG_ON_ZERO().
Remove it.
[1] commit d7a516c6ee ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()")
Link: https://git.kernel.org/torvalds/c/d7a516c6eeae
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://git.kernel.org/next/linux-next/c/b88937277df
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add some additional tests in lib/tests/test_bits.c to cover the
expected results of the fixed type BIT_U*() macros.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add some additional tests in lib/tests/test_bits.c to cover the
expected/non-expected values of the fixed-type GENMASK_U*() macros.
Also check that the result value matches the expected type. Since
those are known at build time, use static_assert() instead of normal
kunit tests.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Now that include/linux/bits.h implements fixed-width GENMASK_U*(), use
them to implement the i915/xe specific macros. Converting each driver
to use the generic macros are left for later, when/if other
driver-specific macros are also generalized.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Implement fixed-type BIT_U*() to help drivers add stricter checks,
like it was done for GENMASK_U*().
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
