SMMUv3 co-mingles FEAT_IOPF and FEAT_SVA behaviors so that fault reporting
doesn't work unless both are enabled. This is not correct and causes
problems for iommufd which does not enable FEAT_SVA for it's fault capable
domains.
These APIs are both obsolete, update SMMUv3 to use the new method like AMD
implements.
A driver should enable iopf support when a domain with an iopf_handler is
attached, and disable iopf support when the domain is removed.
Move the fault support logic to sva domain allocation and to domain
attach, refusing to create or attach fault capable domains if the HW
doesn't support it.
Move all the logic for controlling the iopf queue under
arm_smmu_attach_prepare(). Keep track of the number of domains on the
master (over all the SSIDs) that require iopf. When the first domain
requiring iopf is attached create the iopf queue, when the last domain is
detached destroy it.
Turn FEAT_IOPF and FEAT_SVA into no ops.
Remove the sva_lock, this is all protected by the group mutex.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
On the Lenovo ThinkPad X201, when Intel VT-d is enabled in the BIOS, the
kernel boots with errors related to DMAR, the graphical interface appeared
quite choppy, and the system resets erratically within a minute after it
booted:
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write NO_PASID] Request device [00:02.0] fault addr 0xb97ff000
[fault reason 0x05] PTE Write access is not set
Upon comparing boot logs with VT-d on/off, I found that the Intel Calpella
quirk (`quirk_calpella_no_shadow_gtt()') correctly applied the igfx IOMMU
disable/quirk correctly:
pci 0000:00:00.0: DMAR: BIOS has allocated no shadow GTT; disabling IOMMU
for graphics
Whereas with VT-d on, it went into the "else" branch, which then
triggered the DMAR handling fault above:
... else if (!disable_igfx_iommu) {
/* we have to ensure the gfx device is idle before we flush */
pci_info(dev, "Disabling batched IOTLB flush on Ironlake\n");
iommu_set_dma_strict();
}
Now, this is not exactly scientific, but moving 0x0044 to quirk_iommu_igfx
seems to have fixed the aforementioned issue. Running a few `git blame'
runs on the function, I have found that the quirk was originally
introduced as a fix specific to ThinkPad X201:
commit 9eecabcb9a ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave
no shadow GTT space")
Which was later revised twice to the "else" branch we saw above:
- 2011: commit 6fbcfb3e46 ("intel-iommu: Workaround IOTLB hang on
Ironlake GPU")
- 2024: commit ba00196ca4 ("iommu/vt-d: Decouple igfx_off from graphic
identity mapping")
I'm uncertain whether further testings on this particular laptops were
done in 2011 and (honestly I'm not sure) 2024, but I would be happy to do
some distro-specific testing if that's what would be required to verify
this patch.
P.S., I also see IDs 0x0040, 0x0062, and 0x006a listed under the same
`quirk_calpella_no_shadow_gtt()' quirk, but I'm not sure how similar these
chipsets are (if they share the same issue with VT-d or even, indeed, if
this issue is specific to a bug in the Lenovo BIOS). With regards to
0x0062, it seems to be a Centrino wireless card, but not a chipset?
I have also listed a couple (distro and kernel) bug reports below as
references (some of them are from 7-8 years ago!), as they seem to be
similar issue found on different Westmere/Ironlake, Haswell, and Broadwell
hardware setups.
Cc: stable@vger.kernel.org
Fixes: 6fbcfb3e46 ("intel-iommu: Workaround IOTLB hang on Ironlake GPU")
Fixes: ba00196ca4 ("iommu/vt-d: Decouple igfx_off from graphic identity mapping")
Link: https://groups.google.com/g/qubes-users/c/4NP4goUds2c?pli=1
Link: https://bugs.archlinux.org/task/65362
Link: https://bbs.archlinux.org/viewtopic.php?id=230323
Reported-by: Wenhao Sun <weiguangtwk@outlook.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=197029
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Link: https://lore.kernel.org/r/20250415133330.12528-1-jeffbai@aosc.io
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Restructure MDS mitigation selection to use select/update/apply
functions to create consistent vulnerability handling.
[ bp: rename and beef up comment over VERW mitigation selected var for
maximum clarity. ]
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/20250418161721.1855190-2-david.kaplan@amd.com
I have a solid background in file systems and since much of my
recent work has focused on EROFS, I am familiar with it. Now I
have the time and am willing to help review EROFS patches.
I hope my participation can be helpful to the EROFS patch review
process.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Acked-by: Chao Yu <chao@kernel.org>
Acked-by: Gao Xiang <xiang@kernel.org>
Link: https://lore.kernel.org/r/20250424030653.3308358-1-lihongbo22@huawei.com
Signed-off-by: Gao Xiang <xiang@kernel.org>
XFS has its own buffer cache for metadata that uses submit_bio, which
means that it no longer uses the block device pagecache for anything.
Create a more lightweight helper that runs the blocksize checks and
flushes dirty data and use that instead. No more truncating the
pagecache because XFS does not use it or care about it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We need two patches inside linux-block tree as dependencies of the patch
which will follow this merge.
Specifically, we need:
block: fix race between set_blocksize and read paths
block: hoist block size validation code to a separate function
Signed-off-by: Carlos Maiolino <cem@kernel.org>
According to Mali manuals, the powerup sequence should be
enable pd, asserting the reset then enabling the clock and
the reverse for powerdown.
Reviewed-by: Steven Price <steven.price@arm.com>
Tested-by: John Williams <porschemad911@gmail.com>
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250403055210.54486-4-simons.philippe@gmail.com
Tie the Allwinner compatible string to the GPU_PM_RT feature bits that will
toggle the clocks and the reset line whenever the power domain is changing
state.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250403055210.54486-3-simons.philippe@gmail.com
When the GPU is the only device attached to a single power domain,
core genpd disable and enable it when gpu enter and leave runtime suspend.
Some power-domain requires a sequence before disabled,
and the reverse when enabled.
Add GPU_PM_RT flag, and implement in
panfrost_device_runtime_suspend/resume.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250403055210.54486-2-simons.philippe@gmail.com
Lei Chen raised an issue with CLOCK_MONOTONIC_COARSE seeing time
inconsistencies. Lei tracked down that this was being caused by the
adjustment:
tk->tkr_mono.xtime_nsec -= offset;
which is made to compensate for the unaccumulated cycles in offset when the
multiplicator is adjusted forward, so that the non-_COARSE clockids don't
see inconsistencies.
However, the _COARSE clockid getter functions use the adjusted xtime_nsec
value directly and do not compensate the negative offset via the
clocksource delta multiplied with the new multiplicator. In that case the
caller can observe time going backwards in consecutive calls.
By design, this negative adjustment should be fine, because the logic run
from timekeeping_adjust() is done after it accumulated approximately
multiplicator * interval_cycles
into xtime_nsec. The accumulated value is always larger then the
mult_adj * offset
value, which is subtracted from xtime_nsec. Both operations are done
together under the tk_core.lock, so the net change to xtime_nsec is always
always be positive.
However, do_adjtimex() calls into timekeeping_advance() as well, to
apply the NTP frequency adjustment immediately. In this case,
timekeeping_advance() does not return early when the offset is smaller
then interval_cycles. In that case there is no time accumulated into
xtime_nsec. But the subsequent call into timekeeping_adjust(), which
modifies the multiplicator, subtracts from xtime_nsec to correct for the
new multiplicator.
Here because there was no accumulation, xtime_nsec becomes smaller than
before, which opens a window up to the next accumulation, where the
_COARSE clockid getters, which don't compensate for the offset, can
observe the inconsistency.
This has been tried to be fixed by forwarding the timekeeper in the case
that adjtimex() adjusts the multiplier, which resets the offset to zero:
757b000f7b ("timekeeping: Fix possible inconsistencies in _COARSE clockids")
That works correctly, but unfortunately causes a regression on the
adjtimex() side. There are two issues:
1) The forwarding of the base time moves the update out of the original
period and establishes a new one.
2) The clearing of the accumulated NTP error is changing the behaviour as
well.
User-space expects that multiplier/frequency updates are in effect, when the
syscall returns, so delaying the update to the next tick is not solving the
problem either.
Commit 757b000f7b was reverted so that the established expectations of
user space implementations (ntpd, chronyd) are restored, but that obviously
brought the inconsistencies back.
One of the initial approaches to fix this was to establish a separate
storage for the coarse time getter nanoseconds part by calculating it from
the offset. That was dropped on the floor because not having yet another
state to maintain was simpler. But given the result of the above exercise,
this solution turns out to be the right one. Bring it back in a slightly
modified form.
Thus introduce timekeeper::coarse_nsec and store that nanoseconds part in
it, switch the time getter functions and the VDSO update to use that value.
coarse_nsec is set on operations which forward or initialize the timekeeper
and after time was accumulated during a tick. If there is no accumulation
the timestamp is unchanged.
This leaves the adjtimex() behaviour unmodified and prevents coarse time
from going backwards.
[ jstultz: Simplified the coarse_nsec calculation and kept behavior so
coarse clockids aren't adjusted on each inter-tick adjtimex
call, slightly reworked the comments and commit message ]
Fixes: da15cfdae0 ("time: Introduce CLOCK_REALTIME_COARSE")
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/all/20250419054706.2319105-1-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
The hdr_first_de() function returns a pointer to a struct NTFS_DE. This
pointer may be NULL. To handle the NULL error effectively, it is important
to implement an error handler. This will help manage potential errors
consistently.
Additionally, error handling for the return value already exists at other
points where this function is called.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Static analysis shows that pointer "mi" cannot be NULL, since it is
pre-initialized above. A potential failure when mi equals NULL is
processed.
Remove the extra NULL check. It is meaningless and harms the readability
of the code, since before that the pointer is unconditionally
dereferenced.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
Christian Brauner <brauner@kernel.org> says:
SO_PEERPIDFD currently doesn't support handing out pidfds if the
sk->sk_peer_pid thread-group leader has already been reaped. In this
case it currently returns EINVAL. Userspace still wants to get a pidfd
for a reaped process to have a stable handle it can pass on.
This is especially useful now that it is possible to retrieve exit
information through a pidfd via the PIDFD_GET_INFO ioctl()'s
PIDFD_INFO_EXIT flag.
Another summary has been provided by David in [1]:
> A pidfd can outlive the task it refers to, and thus user-space must
> already be prepared that the task underlying a pidfd is gone at the time
> they get their hands on the pidfd. For instance, resolving the pidfd to
> a PID via the fdinfo must be prepared to read `-1`.
>
> Despite user-space knowing that a pidfd might be stale, several kernel
> APIs currently add another layer that checks for this. In particular,
> SO_PEERPIDFD returns `EINVAL` if the peer-task was already reaped,
> but returns a stale pidfd if the task is reaped immediately after the
> respective alive-check.
>
> This has the unfortunate effect that user-space now has two ways to
> check for the exact same scenario: A syscall might return
> EINVAL/ESRCH/... *or* the pidfd might be stale, even though there is no
> particular reason to distinguish both cases. This also propagates
> through user-space APIs, which pass on pidfds. They must be prepared to
> pass on `-1` *or* the pidfd, because there is no guaranteed way to get a
> stale pidfd from the kernel.
> Userspace must already deal with a pidfd referring to a reaped task as
> the task may exit and get reaped at any time will there are still many
> pidfds referring to it.
In order to allow handing out reaped pidfd SO_PEERPIDFD needs to ensure
that PIDFD_INFO_EXIT information is available whenever a pidfd for a
reaped task is created by PIDFD_INFO_EXIT. The uapi promises that reaped
pidfds are only handed out if it is guaranteed that the caller sees the
exit information:
TEST_F(pidfd_info, success_reaped)
{
struct pidfd_info info = {
.mask = PIDFD_INFO_CGROUPID | PIDFD_INFO_EXIT,
};
/*
* Process has already been reaped and PIDFD_INFO_EXIT been set.
* Verify that we can retrieve the exit status of the process.
*/
ASSERT_EQ(ioctl(self->child_pidfd4, PIDFD_GET_INFO, &info), 0);
ASSERT_FALSE(!!(info.mask & PIDFD_INFO_CREDS));
ASSERT_TRUE(!!(info.mask & PIDFD_INFO_EXIT));
ASSERT_TRUE(WIFEXITED(info.exit_code));
ASSERT_EQ(WEXITSTATUS(info.exit_code), 0);
}
To hand out pidfds for reaped processes we thus allocate a pidfs entry
for the relevant sk->sk_peer_pid at the time the sk->sk_peer_pid is
stashed and drop it when the socket is destroyed. This guarantees that
exit information will always be recorded for the sk->sk_peer_pid task
and we can hand out pidfds for reaped processes.
* patches from https://lore.kernel.org/20250425-work-pidfs-net-v2-0-450a19461e75@kernel.org:
net, pidfs: enable handing out pidfds for reaped sk->sk_peer_pid
pidfs: get rid of __pidfd_prepare()
net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid
pidfs: register pid in pidfs
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-0-450a19461e75@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that all preconditions are met, allow handing out pidfs for reaped
sk->sk_peer_pids.
Thanks to Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
for pointing out that we need to limit this to AF_UNIX sockets for now.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-4-450a19461e75@kernel.org
Reviewed-by: David Rheinsberg <david@readahead.eu>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert the OMFS filesystem to the new mount API.
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Link: https://lore.kernel.org/20250423220001.1535071-1-preichl@redhat.com
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The vfs has long had a fallback to obtain the security.* xattrs from the
LSM when the filesystem does not implement its own listxattr, but
shmem/tmpfs and kernfs later gained their own xattr handlers to support
other xattrs. Unfortunately, as a side effect, tmpfs and kernfs-based
filesystems like sysfs no longer return the synthetic security.* xattr
names via listxattr unless they are explicitly set by userspace or
initially set upon inode creation after policy load. coreutils has
recently switched from unconditionally invoking getxattr for security.*
for ls -Z via libselinux to only doing so if listxattr returns the xattr
name, breaking ls -Z of such inodes.
Before:
$ getfattr -m.* /run/initramfs
<no output>
$ getfattr -m.* /sys/kernel/fscaps
<no output>
$ setfattr -n user.foo /run/initramfs
$ getfattr -m.* /run/initramfs
user.foo
After:
$ getfattr -m.* /run/initramfs
security.selinux
$ getfattr -m.* /sys/kernel/fscaps
security.selinux
$ setfattr -n user.foo /run/initramfs
$ getfattr -m.* /run/initramfs
security.selinux
user.foo
Link: https://lore.kernel.org/selinux/CAFqZXNtF8wDyQajPCdGn=iOawX4y77ph0EcfcqcUUj+T87FKyA@mail.gmail.com/
Link: https://lore.kernel.org/selinux/20250423175728.3185-2-stephen.smalley.work@gmail.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Link: https://lore.kernel.org/20250424152822.2719-1-stephen.smalley.work@gmail.com
Fixes: b09e0fa4b4 ("tmpfs: implement generic xattr support")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Convert binding doc vf610-nfc to yaml format.
Additional changes:
- ref to nand-controller.yaml.
- include arm-gic.h and vf610-clock.h in examples.
- add clocks and clock-names description.
- remove #address-cells, #size-cells assigned-clocks and
assigned-clock-rates.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The Rockchip RK3576 has two SATA controllers. They work the same as the
RK3568 SATA controllers, having the same number of clocks and ports.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-1-23ee89c939fe@collabora.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into usb-next
We need the USB fixes in here as well, and this resolves the following
merge conflicts that were reported in linux-next:
drivers/usb/chipidea/ci_hdrc_imx.c
drivers/usb/host/xhci.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SPI operations have been initially described through macros implicitly
implying the use of a single SPI SDR bus. Macros for supporting dual and
quad I/O transfers have been added on top, generally inspired by vendor
vendor naming, followed by DTR operations. Soon we might see octal
and even octal DTR operations as well (including the opcode byte).
Let's clarify what the macro really means by describing the expected bus
topology in the reset macro name.
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Now that the hypervisor's state is stored in the hyp_vmemmap, we no
longer need an expensive page-table walk to read it. This means we can
now afford to cross check the hyp-state during all memory ownership
transitions where the hyp is involved unconditionally, hence avoiding
problems such as [1].
[1] https://lore.kernel.org/kvmarm/20241128154406.602875-1-qperret@google.com/
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-8-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently blindly map into EL2 stage-1 *any* page passed to the
__pkvm_host_share_hyp() HVC. This is less than ideal from a security
perspective as it makes exploitation of potential hypervisor gadgets
easier than it should be. But interestingly, pKVM should never need to
access SHARED_BORROWED pages that it hasn't previously pinned, so there
is no need to map the page before that.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tracking the hypervisor's ownership state into struct hyp_page has
several benefits, including allowing far more efficient lookups (no
page-table walk needed) and de-corelating the state from the presence
of a mapping. This will later allow to map pages into EL2 stage-1 less
proactively which is generally a good thing for security. And in the
future this will help with tracking the state of pages mapped into the
hypervisor's private range without requiring an alias into the 'linear
map' range.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Instead of directly accessing the host_state member in struct hyp_page,
introduce static inline accessors to do it. The future hyp_state member
will follow the same pattern as it will need some logic in the accessors.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-5-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The page ownership state encoded as 0b11 is currently considered
reserved for future use, and PKVM_NOPAGE uses bit 2. In order to
simplify the relocation of the hyp ownership state into the
vmemmap in later patches, let's use the 'reserved' encoding for
the PKVM_NOPAGE state. The struct hyp_page layout isn't guaranteed
stable at all, so there is no real reason to have 'reserved' encodings.
No functional changes intended.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-4-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Most of the comments relating to pKVM page-tracking in nvhe/memory.h are
now either slightly outdated or outright wrong. Fix the comments.
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-3-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When dealing with a guest with SVE enabled, make sure the host SVE
state is pinned at EL2 S1, and that the hypervisor vCPU state is
correctly initialised (and then unpinned on teardown).
Co-authored-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250416152648.2982950-2-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently, only EDP supports alpm. So, check for alpm support and prevent
the DP connector from accessing the alpm register if doing so is unsupported.
Fixes: acff6d6bde ("drm/i915/lobf: Add mutex for alpm update")
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250425132107.2926759-1-animesh.manna@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into tty-next
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DRM GEM is the DRM memory management subsystem used by most modern
drivers; add a Rust abstraction for DRM GEM.
This includes the BaseObject trait, which contains operations shared by
all GEM object classes.
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-8-dakr@kernel.org
[ Rework of GEM object abstractions
* switch to the Opaque<T> type
* fix (mutable) references to struct drm_gem_object (which in this
context is UB)
* drop all custom reference types in favor of AlwaysRefCounted
* bunch of minor changes and simplifications (e.g. IntoGEMObject
trait)
* write and fix safety and invariant comments
* remove necessity for and convert 'as' casts
* original source archive: https://archive.is/dD5SL
- Danilo ]
[ Fix missing CONFIG_DRM guards in rust/helpers/drm.c. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
fix the below warning messages:
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'hit_low' not described in 'ttm_bo_swapout_walk'
ttm/ttm_bo.c:1098: warning: Function parameter or struct member 'evict_low' not described in 'ttm_bo_swapout_walk'
Cc: Maarten Lankhorst <dev@lankhorst.se>
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250423042442.762108-1-sunil.khatri@amd.com
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into driver-core-next
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgOrWseHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGFyIH/AhXcuA8y8rk43mo
t+0GO7JR4dnr4DIl74GgDjCXlXiKCT7EXMfD/ABdofTxV4Pbyv+pUODlg1E6eO9U
C1WWM5PPNBGDDEVSQ3Yu756nr0UoiFhvW0R6pVdou5cezCWAtIF9LTN8DEUgis0u
EUJD9+/cHAMzfkZwabjm/HNsa1SXv2X47MzYv/PdHKr0htEPcNHF4gqBrBRdACGy
FJtaCKhuPf6TcDNXOFi5IEWMXrugReRQmOvrXqVYGa7rfUFkZgsAzRY6n/rUN5Z9
FAgle4Vlv9ohVYj9bXX8b6wWgqiKRpoN+t0PpRd6G6ict1AFBobNGo8LH3tYIKqZ
b/dCGNg=
=xDGd
-----END PGP SIGNATURE-----
Merge 6.15-rc4 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With a recently added helper we can complete the conversion of
the GPIOLIB code to use devm_add_action() in all suitable cases.
So do this.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In some code we would like to know if the action in device managed resources
was added by devm_add_action() family of calls. Introduce a helper for that.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a newly created header linux/device/devres.h that gathers
device managed APIs, so users won't need to include entire device.h
for only these ones. Move devm_*_action*() APIs to devres.h as well.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220162238.2738038-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
RTL8723BE found on some ASUSTek laptops, such as F441U and X555UQ with
subsystem ID 11ad:1723 are known to output large amounts of PCIe AER
errors during and after boot up, causing heavy lags and at times lock-ups:
pcieport 0000:00:1c.5: AER: Correctable error message received from 0000:00:1c.5
pcieport 0000:00:1c.5: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
pcieport 0000:00:1c.5: device [8086:9d15] error status/mask=00000001/00002000
pcieport 0000:00:1c.5: [ 0] RxErr
Disable ASPM on this combo as a quirk.
This patch is a revision of a previous patch (linked below) which
attempted to disable ASPM for RTL8723BE on all Intel Skylake and Kaby Lake
PCIe bridges. I take a more conservative approach as all known reports
point to ASUSTek laptops of these two generations with this particular
wireless card.
Please note, however, before the rtl8723be finishes probing, the AER
errors remained. After the module finishes probing, all AER errors would
indeed be eliminated, along with heavy lags, poor network throughput,
and/or occasional lock-ups.
Cc: <stable@vger.kernel.org>
Fixes: a619d1abe2 ("rtlwifi: rtl8723be: Add new driver")
Reported-by: Liangliang Zou <rawdiamondmc@outlook.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218127
Link: https://lore.kernel.org/lkml/05390e0b-27fd-4190-971e-e70a498c8221@lwfinger.net/T/
Tested-by: Liangliang Zou <rawdiamondmc@outlook.com>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250422061755.356535-1-jeffbai@aosc.io
