Before adopting regd_UK TX power settings, some certifications are needed
and might be platform-level. Without that, should adopt regd_ETSI TX power
settings. But for now, there is no way to inform driver of it yet. So, add
a flag first. But for now, comprehensively use regd_ETSI TX power settings
to restrict regd_UK.
Plan to define an ACPI DSM function to inform driver whether to use regd_UK
own TX power settings or not afterwards.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-4-pkshih@realtek.com
An incorrect Voltage Controlled Oscillator (VCO) setting
may cause Synthesizer (SYN) unlock, which may lead to a
failure in the TX authentication request.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-3-pkshih@realtek.com
After firmware 0.27.125.0, it adds more fields to support firmware secure
boot. Though current driver has supported the format, old driver can't
recognize the new format, increase firmware format to 2 to avoid failed
to load the firmware by old driver.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250416081241.36138-2-pkshih@realtek.com
Fold it into pidfd_prepare() and rename PIDFD_CLONE to PIDFD_STALE to
indicate that the passed pid might not have task linkage and no explicit
check for that should be performed.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-3-450a19461e75@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
SO_PEERPIDFD currently doesn't support handing out pidfds if the
sk->sk_peer_pid thread-group leader has already been reaped. In this
case it currently returns EINVAL. Userspace still wants to get a pidfd
for a reaped process to have a stable handle it can pass on.
This is especially useful now that it is possible to retrieve exit
information through a pidfd via the PIDFD_GET_INFO ioctl()'s
PIDFD_INFO_EXIT flag.
Another summary has been provided by David in [1]:
> A pidfd can outlive the task it refers to, and thus user-space must
> already be prepared that the task underlying a pidfd is gone at the time
> they get their hands on the pidfd. For instance, resolving the pidfd to
> a PID via the fdinfo must be prepared to read `-1`.
>
> Despite user-space knowing that a pidfd might be stale, several kernel
> APIs currently add another layer that checks for this. In particular,
> SO_PEERPIDFD returns `EINVAL` if the peer-task was already reaped,
> but returns a stale pidfd if the task is reaped immediately after the
> respective alive-check.
>
> This has the unfortunate effect that user-space now has two ways to
> check for the exact same scenario: A syscall might return
> EINVAL/ESRCH/... *or* the pidfd might be stale, even though there is no
> particular reason to distinguish both cases. This also propagates
> through user-space APIs, which pass on pidfds. They must be prepared to
> pass on `-1` *or* the pidfd, because there is no guaranteed way to get a
> stale pidfd from the kernel.
> Userspace must already deal with a pidfd referring to a reaped task as
> the task may exit and get reaped at any time will there are still many
> pidfds referring to it.
In order to allow handing out reaped pidfd SO_PEERPIDFD needs to ensure
that PIDFD_INFO_EXIT information is available whenever a pidfd for a
reaped task is created by PIDFD_INFO_EXIT. The uapi promises that reaped
pidfds are only handed out if it is guaranteed that the caller sees the
exit information:
TEST_F(pidfd_info, success_reaped)
{
struct pidfd_info info = {
.mask = PIDFD_INFO_CGROUPID | PIDFD_INFO_EXIT,
};
/*
* Process has already been reaped and PIDFD_INFO_EXIT been set.
* Verify that we can retrieve the exit status of the process.
*/
ASSERT_EQ(ioctl(self->child_pidfd4, PIDFD_GET_INFO, &info), 0);
ASSERT_FALSE(!!(info.mask & PIDFD_INFO_CREDS));
ASSERT_TRUE(!!(info.mask & PIDFD_INFO_EXIT));
ASSERT_TRUE(WIFEXITED(info.exit_code));
ASSERT_EQ(WEXITSTATUS(info.exit_code), 0);
}
To hand out pidfds for reaped processes we thus allocate a pidfs entry
for the relevant sk->sk_peer_pid at the time the sk->sk_peer_pid is
stashed and drop it when the socket is destroyed. This guarantees that
exit information will always be recorded for the sk->sk_peer_pid task
and we can hand out pidfds for reaped processes.
Link: https://lore.kernel.org/lkml/20230807085203.819772-1-david@readahead.eu [1]
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-2-450a19461e75@kernel.org
Reviewed-by: David Rheinsberg <david@readahead.eu>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add simple helpers that allow a struct pid to be pinned via a pidfs
dentry/inode. If no pidfs dentry exists a new one will be allocated for
it. A reference is taken by pidfs on @pid. The reference must be
released via pidfs_put_pid().
This will allow AF_UNIX sockets to allocate a dentry for the peer
credentials pid at the time they are recorded where we know the task is
still alive. When the task gets reaped its exit status is guaranteed to
be recorded and a pidfd can be handed out for the reaped task.
Link: https://lore.kernel.org/20250425-work-pidfs-net-v2-1-450a19461e75@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: David Rheinsberg <david@readahead.eu>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Louis-Alexis Eyraud says:
====================
net: ethernet: mtk-star-emac: fix several issues on rx/tx poll
This patchset fixes two issues with the mtk-star-emac driver.
The first patch fixes spin lock recursion issues I've observed on the
Mediatek Genio 350-EVK board using this driver when the Ethernet
functionality is enabled on the board (requires a correct jumper and
DIP switch configuration, as well as enabling the device in the
devicetree).
The issues can be easily reproduced with apt install or ssh commands
especially and with the CONFIG_DEBUG_SPINLOCK parameter, when
one occurs, there is backtrace similar to this:
```
BUG: spinlock recursion on CPU#0, swapper/0/0
lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0,
.owner_cpu: 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT
Hardware name: MediaTek MT8365 Open Platform EVK (DT)
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x60/0x80
dump_stack+0x18/0x24
spin_dump+0x78/0x88
do_raw_spin_lock+0x11c/0x120
_raw_spin_lock+0x20/0x2c
mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac]
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x4c/0xb0
handle_fasteoi_irq+0xa0/0x1bc
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x120
do_interrupt_handler+0x50/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
regmap_mmio_read32le+0xc/0x20 (P)
_regmap_bus_reg_read+0x6c/0xac
_regmap_read+0x60/0xdc
regmap_read+0x4c/0x80
mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac]
__napi_poll+0x38/0x188
net_rx_action+0x164/0x2c0
handle_softirqs+0x100/0x244
__do_softirq+0x14/0x20
____do_softirq+0x10/0x20
call_on_irq_stack+0x24/0x64
do_softirq_own_stack+0x1c/0x40
__irq_exit_rcu+0xd4/0x10c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
cpuidle_enter_state+0xac/0x320 (P)
cpuidle_enter+0x38/0x50
do_idle+0x1e4/0x260
cpu_startup_entry+0x34/0x3c
rest_init+0xdc/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
```
The second patch is a cleanup patch to fix a inconsistency in the
mtk_star_rx_poll function between the napi_complete_done api usage and
its description in documentation.
I've tested this patchset on Mediatek Genio 350-EVK board with a kernel
based on linux-next (tag: next-20250422).
v1: https://lore.kernel.org/20250422-mtk_star_emac-fix-spinlock-recursion-issue-v1-0-1e94ea430360@collabora.com
====================
Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-0-f3fde2e529d8@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mtk_star_rx_poll function, on event processing completion, the
mtk_star_emac driver calls napi_complete_done but ignores its return
code and enable RX DMA interrupts inconditionally. This return code
gives the info if a device should avoid rearming its interrupts or not,
so fix this behaviour by taking it into account.
Fixes: 8c7bd5a454 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250424-mtk_star_emac-fix-spinlock-recursion-issue-v2-2-f3fde2e529d8@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following compile error reported by the kernel test
robot by modifying the condition used to detect overflow in
rtase_calc_time_mitigation.
In file included from include/linux/mdio.h:10:0,
from drivers/net/ethernet/realtek/rtase/rtase_main.c:58:
In function 'u16_encode_bits',
inlined from 'rtase_calc_time_mitigation.constprop' at drivers/net/
ethernet/realtek/rtase/rtase_main.c:1915:13,
inlined from 'rtase_init_software_variable.isra.41' at drivers/net/
ethernet/realtek/rtase/rtase_main.c:1961:13,
inlined from 'rtase_init_one' at drivers/net/ethernet/realtek/
rtase/rtase_main.c:2111:2:
>> include/linux/bitfield.h:178:3: error: call to '__field_overflow'
declared with attribute error: value doesn't fit into mask
__field_overflow(); \
^~~~~~~~~~~~~~~~~~
include/linux/bitfield.h:198:2: note: in expansion of macro
'____MAKE_OP'
____MAKE_OP(u##size,u##size,,)
^~~~~~~~~~~
include/linux/bitfield.h:200:1: note: in expansion of macro
'__MAKE_OP'
__MAKE_OP(16)
^~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503182158.nkAlbJWX-lkp@intel.com/
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250424040444.5530-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function kvm_pre_enter_guest(), it prepares to enter guest and check
whether there are pending signals or events. And it will not enter guest
if there are, PMU pass-through preparation for guest should be cancelled
and host should own PMU hardware.
Cc: stable@vger.kernel.org
Fixes: f4e40ea9f7 ("LoongArch: KVM: Add PMU support for guest")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some registers such as LOONGARCH_CSR_ESTAT and LOONGARCH_CSR_GINTC are
partly cleared with function _kvm_setcsr(). This comes from the hardware
specification, some bits are read only in VM mode, and however they can
be written in host mode. So they are partly cleared in VM mode, and can
be fully cleared in host mode.
These read only bits show pending interrupt or exception status. When VM
reset, the read-only bits should be cleared, otherwise vCPU will receive
unknown interrupts in boot stage.
Here registers LOONGARCH_CSR_ESTAT/LOONGARCH_CSR_GINTC are fully cleared
in ioctl KVM_REG_LOONGARCH_VCPU_RESET vCPU reset path.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA).
The architecture does not even define MAX_DMA_PFN.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Like the other relevant symbols, export some fp, lsx, lasx and lbt
assembly symbols and put the function declarations in header files
rather than source files.
While at it, use "asmlinkage" for the other existing C prototypes
of assembly functions and also do not use the "extern" keyword with
function declarations according to the document coding-style.rst.
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, interrupts need to be disabled before single-step mode is
set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag()
which is called by setup_singlestep(), this is reasonable.
But in the first kprobe breakpoint exception, if the irq is enabled at
the beginning of do_bp(), it will not be disabled at the end of do_bp()
due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for
this case, it may corrupt exception context when restoring the exception
after do_bp() in handle_bp(), this is not reasonable.
In order to restore exception safely in handle_bp(), it needs to ensure
the irq is disabled at the end of do_bp(), so just add a local variable
to record the original interrupt status in the parent context, then use
it as the check condition to enable and disable irq in do_bp().
While at it, do the similar thing for other do_xyz() exception handlers
to make them more robust.
Fixes: 6d4cc40fb5 ("LoongArch: Add kprobes support")
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
As of commit dce4456619 ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reconfiguration of netdev may trigger close/open procedure which can
break FIFO status by adjusting the amount of empty slots for TX
timestamps. But it is not really needed because timestamps for the
packets sent over the wire still can be retrieved. On the other side,
during netdev close procedure any skbs waiting for TX timestamps can be
leaked because there is no cleaning procedure called. Free skbs waiting
for TX timestamps when closing netdev.
Fixes: 8aa2a79e9b ("bnxt_en: Increase the max total outstanding PTP TX packets to 4")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Link: https://patch.msgid.link/20250424125547.460632-1-vadfed@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netdevice usage count increases during transmit queue timeouts
because netdev_hold is called in ndo_tx_timeout, scheduling a task
to reinitialize the card. Although netdev_put is called at the end
of the scheduled work, rtnl_unlock checks the reference count during
cleanup. This could cause issues if transmit timeout is called on
multiple queues.
Fixes: cb7dd71218 ("octeon_ep_vf: Add driver framework and device initialization")
Signed-off-by: Sathesh B Edara <sedara@marvell.com>
Link: https://patch.msgid.link/20250424133944.28128-1-sedara@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent discussions around commit ad1afb0039 ("vlan_dev: VLAN 0 should
be treated as "no vlan tag" (802.1p packet)") have sparked the question
what happens with the DSA (and possibly other switchdev) data path when
the bridge says that ports should have no PVID VLAN, but the 8021q
module, as the result of a NETDEV_UP event, decides it should add VID 0
to the RX filter of those bridge ports. Do those bridge ports receive
packets tagged with VID 0 or not, now? We don't know, there is no test.
In the veth realm, this passes trivially, because veth is not VLAN
filtering and this, the 8021q module lacks the instinct to add VID 0 in
the first place.
In the realm of VLAN filtering NICs with no switchdev offload, this
should also pass, because the VLAN groups of the software bridge are
consulted, where it can clearly be seen that a PVID is missing, even
though the packet was initially accepted by the NIC.
The test only poses a challenge for switchdev drivers, which usually
have to program to hardware both VLANs from RX filtering, as well as
from switchdev. Especially when a switchdev port joins a VLAN-aware
bridge, it is unavoidable that it gains the NETIF_F_HW_VLAN_CTAG_FILTER
feature, i.e. any 8021q uppers that the bridge port may have must also
be committed to the RX filtering table of the interface. When a
VLAN-tagged packet is physically received by the port, it is initially
indistinguishable whether it will reach the bridge data path or the
8021q upper data path.
That is rather the final step of the new tests that we introduce.
We need to build context up to that stage, which means the following:
- we need to test that 802.1p (VID 0) tagged traffic is received in the
first place (on bridge ports with a valid PVID). This is the "8021p"
test.
- we need to test that the usual paths of reaching a configuration with
no PVID on a bridge port are all covered and they all reach the same
state.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424223734.3096202-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following set of commands:
ip link add br0 type bridge vlan_filtering 1 # vlan_default_pvid 1 is implicit
ip link set swp0 master br0
bridge vlan add dev swp0 vid 1
should result in the dropping of untagged and 802.1p-tagged traffic, but
we see that it continues to be accepted. Whereas, had we deleted VID 1
instead, the aforementioned dropping would have worked
This is because the ANA_PORT_DROP_CFG update logic doesn't run, because
ocelot_vlan_add() only calls ocelot_port_set_pvid() if the new VLAN has
the BRIDGE_VLAN_INFO_PVID flag.
Similar to other drivers like mt7530_port_vlan_add() which handle this
case correctly, we need to test whether the VLAN we're changing used to
have the BRIDGE_VLAN_INFO_PVID flag, but lost it now. That amounts to a
PVID deletion and should be treated as such.
Regarding blame attribution: this never worked properly since the
introduction of bridge VLAN filtering in commit 7142529f16 ("net:
mscc: ocelot: add VLAN filtering"). However, there was a significant
paradigm shift which aligned the ANA_PORT_DROP_CFG register with the
PVID concept rather than with the native VLAN concept, and that change
wasn't targeted for 'stable'. Realistically, that is as far as this fix
needs to be propagated to.
Fixes: be0576fed6 ("net: mscc: ocelot: move the logic to drop 802.1p traffic to the pvid deletion")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250424223734.3096202-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Wei says:
====================
io_uring/zcrx: fix selftests and add new test for rss ctx
Update io_uring zero copy receive selftest. Patch 1 does a requested
cleanup to use defer() for undoing ethtool actions during the test and
restoring the NIC under test back to its original state.
Patch 2 adds a required call to set hds_thresh to 0. This is needed for
the queue API.
Patch 3 adds a new test case for steering into RSS contexts. A real
application using io_uring zero copy receive relies on this working to
shard work across multiple queues. There seems to be some
differences/bugs with steering into RSS contexts and individual queues.
====================
Link: https://patch.msgid.link/20250425022049.3474590-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RSS contexts are used to shard work across multiple queues for an
application using io_uring zero copy receive. Add a test case checking
that steering flows into an RSS context works.
Until I add multi-thread support to the selftest binary, this test case
only has 1 queue in the RSS context.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting hds_thresh to 0 is required for queue reset.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to using defer() for putting the NIC back to the original state
prior to running the selftest.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Renesas MSIOF (Clock-Synchronized Serial Interface with FIFO) can work as
both SPI and I2S. Adds MSIOF-I2S driver.
MSIOF-SPI/I2S are using same DT compatible properties.
MSIOF-I2S uses Of-Graph for Audio-Graph-Card/Card2,
MSIOF-SPI doesn't use Of-Graph.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/87r01q2wzv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ADG needs its MSTP to use it, and it was handled as "clk_i" before.
R-Car Gen2/Gen3 are using it, but Gen4 doesn't have it.
"clk_i" is not intuitive for ADG MSTP.
Let's enable to use "adg" clock. It can keep compatible with R-Car
Gen2/Gen3 and Gen4.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87sem62x00.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas rsnd related clocks are enabled by rsnd_adg_clk_enable(),
but it doesn't care about BRGA/BRGB selection (It is handled when
SSI was started) (BRGA is used for 44.1kHz lineage, BRGB is used for
48kHz lineage in this driver).
But it should be handled since probe time.
Includes BRGCKR_31 in adg->ckr to handle it since boot time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87tt6m2x05.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio clock generator (= ADG) can be used standalone (without DAI),
but current driver indicates error if it doesn't have DAI on DT.
It is not error, allow to use ADG as standalone.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v7r22x0a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas MSIOF (Clock-Synchronized Serial Interface with FIFO) can work as
both SPI and I2S. MSIOF-I2S will use Audio Graph Card/Card2 driver which
uses Of-Graph in DT.
MSIOF-SPI/I2S are using same DT compatible properties.
MSIOF-I2S uses Of-Graph for Audio-Graph-Card/Card2,
MSIOF-SPI doesn't use Of-Graph.
Adds schema for MSIOF-I2S (= Sound).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/87zfge2x0u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
vmxnet3 driver's XDP handling is buggy for packet sizes using ring0 (that
is, packet sizes between 128 - 3k bytes).
We noticed MTU-related connectivity issues with Cilium's service load-
balancing in case of vmxnet3 as NIC underneath. A simple curl to a HTTP
backend service where the XDP LB was doing IPIP encap led to overly large
packet sizes but only for *some* of the packets (e.g. HTTP GET request)
while others (e.g. the prior TCP 3WHS) looked completely fine on the wire.
In fact, the pcap recording on the backend node actually revealed that the
node with the XDP LB was leaking uninitialized kernel data onto the wire
for the affected packets, for example, while the packets should have been
152 bytes their actual size was 1482 bytes, so the remainder after 152 bytes
was padded with whatever other data was in that page at the time (e.g. we
saw user/payload data from prior processed packets).
We only noticed this through an MTU issue, e.g. when the XDP LB node and
the backend node both had the same MTU (e.g. 1500) then the curl request
got dropped on the backend node's NIC given the packet was too large even
though the IPIP-encapped packet normally would never even come close to
the MTU limit. Lowering the MTU on the XDP LB (e.g. 1480) allowed to let
the curl request succeed (which also indicates that the kernel ignored the
padding, and thus the issue wasn't very user-visible).
Commit e127ce7699 ("vmxnet3: Fix missing reserved tailroom") was too eager
to also switch xdp_prepare_buff() from rcd->len to rbi->len. It really needs
to stick to rcd->len which is the actual packet length from the descriptor.
The latter we also feed into vmxnet3_process_xdp_small(), by the way, and
it indicates the correct length needed to initialize the xdp->{data,data_end}
parts. For e127ce7699 ("vmxnet3: Fix missing reserved tailroom") the
relevant part was adapting xdp_init_buff() to address the warning given the
xdp_data_hard_end() depends on xdp->frame_sz. With that fixed, traffic on
the wire looks good again.
Fixes: e127ce7699 ("vmxnet3: Fix missing reserved tailroom")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Andrew Sauber <andrew.sauber@isovalent.com>
Cc: Anton Protopopov <aspsk@isovalent.com>
Cc: William Tu <witu@nvidia.com>
Cc: Martin Zaharinov <micron10@gmail.com>
Cc: Ronak Doshi <ronak.doshi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250423133600.176689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure that CAN_USE_BPF_ST test (compute_live_registers/store) is
enabled when __clang_major__ >= 18.
Fixes: 2ea8f6a1cd ("selftests/bpf: test cases for compute_live_registers()")
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250425213712.1542077-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Clock controller unit, or CCU, generates various clocks frequency for
peripherals integrated in SpacemiT K1 SoC and is essential for normal
operation. Let's enable it as built-in driver in defconfig.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* Fix the incorrect return type of ata_mselect_control_ata_feature()
* Several fixes for the control of the Command Duration Limits feature
to avoid unnecessary enable and disable actions. Avoiding the
unnecessary enable action also avoids unwanted resets of the CDL
statistics log page as that is implied for any enable action.
* Fix the translation for sensing the control mode page to correctly
return the last enable or disable action performed, as defined in
SAT-6. This correct mode sense information is used to fix the
behavior of the scsi layer to avoid unnecessary mode select command
issuing.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCaAwSugAKCRDdoc3SxdoY
dmh0AP9OcALkZHm6PdDQ4Y6VZAuJL3DEFmZbZG3//V9+CyO7UgEAm2QDHrgkirf3
R3H5aYkP7bYql9pUNSThXMyDRnhJ2w8=
=IEEg
-----END PGP SIGNATURE-----
Merge tag 'ata-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix the incorrect return type of ata_mselect_control_ata_feature()
- Several fixes for the control of the Command Duration Limits feature
to avoid unnecessary enable and disable actions. Avoiding the
unnecessary enable action also avoids unwanted resets of the CDL
statistics log page as that is implied for any enable action.
- Fix the translation for sensing the control mode page to correctly
return the last enable or disable action performed, as defined in
SAT-6. This correct mode sense information is used to fix the
behavior of the scsi layer to avoid unnecessary mode select command
issuing.
* tag 'ata-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
scsi: Improve CDL control
ata: libata-scsi: Improve CDL control
ata: libata-scsi: Fix ata_msense_control_ata_feature()
ata: libata-scsi: Fix ata_mselect_control_ata_feature() return type
The sess->user object can currently be in use by another thread, for
example if another connection has sent a session setup request to
bind to the session being free'd. The handler for that connection could
be in the smb2_sess_setup function which makes use of sess->user.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Heelan <seanheelan@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When retpoline is enabled, indirect function calls introduce additional
performance overhead. Avoid frequent indirect calls to VMGEXIT when SEV
is enabled.
Signed-off-by: Peng Hao <flyingpeng@tencent.com>
Link: https://lore.kernel.org/r/20250306075425.66693-1-flyingpeng@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
AMD EPYC 5th generation processors have introduced a feature that allows
the hypervisor to control the SEV_FEATURES that are set for, or by, a
guest [1]. ALLOWED_SEV_FEATURES can be used by the hypervisor to enforce
that SEV-ES and SEV-SNP guests cannot enable features that the
hypervisor does not want to be enabled.
Always enable ALLOWED_SEV_FEATURES. A VMRUN will fail if any
non-reserved bits are 1 in SEV_FEATURES but are 0 in
ALLOWED_SEV_FEATURES.
Some SEV_FEATURES - currently PmcVirtualization and SecureAvic
(see Appendix B, Table B-4) - require an opt-in via ALLOWED_SEV_FEATURES,
i.e. are off-by-default, whereas all other features are effectively
on-by-default, but still honor ALLOWED_SEV_FEATURES.
[1] Section 15.36.20 "Allowed SEV Features", AMD64 Architecture
Programmer's Manual, Pub. 24593 Rev. 3.42 - March 2024:
https://bugzilla.kernel.org/attachment.cgi?id=306250
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20250310201603.1217954-3-kim.phillips@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add CPU feature detection for "Allowed SEV Features" to allow the
Hypervisor to enforce that SEV-ES and SEV-SNP guest VMs cannot
enable features (via SEV_FEATURES) that the Hypervisor does not
support or wish to be enabled.
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/20250310201603.1217954-2-kim.phillips@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If multiple VMRUN instructions fail, resulting in calls to dump_vmcb(),
the output can become interleaved and it is impossible to identify which
line of output belongs to which VMCB. Add a mutex to dump_vmcb() so that
the output is serialized.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/a880678afd9488e1dd6017445802712f7c02cc6d.1742477213.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
An SEV-ES/SEV-SNP VM save area (VMSA) can be decrypted if the guest
policy allows debugging. Update the dump_vmcb() routine to output
some of the SEV VMSA contents if possible. This can be useful for
debug purposes.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Link: https://lore.kernel.org/r/ea3b852c295b6f4b200925ed6b6e2c90d9475e71.1742477213.git.thomas.lendacky@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
EU stall sampling is not supported on SRIOV VF. Do not
initialize or open EU stall stream on SRIOV VF.
Fixes: 9a0b11d4cf ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/10db5d1c7e17aadca7078ff74575b7ffc0d5d6b8.1745215022.git.harish.chegondi@intel.com
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
