A recent change to the syscon regmap API caused the MediaTek power
controller drivers to fail, as the required regmap could no longer be
retrieved. The error did not have an accompanying message, making the
failure less obvious. The aforementioned change has since been reverted.
Add error messages to all the regmap retrievals, thereby making all
error paths in scpsys_add_one_domain() have visible error messages.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250421090951.395467-1-wenst@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enabling the compile test should not cause automatic enabling of all
drivers, but only allow to choose to compile them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20250417074645.81480-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, setxattrat(2) and getxattrat(2) are wrongly handling the
calls of the from setxattrat(AF_FDCWD, NULL, AT_EMPTY_PATH, ...) and
fail with -EBADF error instead of operating on CWD. Fix it.
Fixes: 6140be90ec ("fs/xattr: add *at family syscalls")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250424132246.16822-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
I used to maintain Allwinner SoC cpufreq and thermal drivers and
have some work experience in the F2FS file system.
I volunteered to maintain the code together with Slava and Adrian.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/20250423123423.2062619-1-frank.li@vivo.com
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
pipe_clear_nowait has two noinline macros, but we only need one.
I checked the whole tree, and this is the only occurrence:
$ grep -r "noinline .* noinline"
fs/splice.c:static noinline void noinline pipe_clear_nowait(struct file *file)
$
Fixes: 0f99fc513d ("splice: clear FMODE_NOWAIT on file if splice/vmsplice is used")
Signed-off-by: "T.J. Mercier" <tjmercier@google.com>
Link: https://lore.kernel.org/20250423180025.2627670-1-tjmercier@google.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The recent move of the bdev_statx call to the low-level vfs_getattr_nosec
helper caused it being used by devtmpfs, which leads to deadlocks in
md teardown due to the block device lookup and put interfering with the
unusual lifetime rules in md.
But as handle_remove only works on inodes created and owned by devtmpfs
itself there is no need to use vfs_getattr_nosec vs simply reading the
mode from the inode directly. Switch to that to avoid the bdev lookup
or any other unintentional side effect.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 777d0961ff ("fs: move the bdex_statx call to vfs_getattr_nosec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250423045941.1667425-1-hch@lst.de
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Xiao Ni <xni@redhat.com>
Tested-by: Ayush Jain <Ayush.jain3@amd.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This reverts commit b6abf63ed7.
This is causing major merge conflicts with the changes in
wireless, where we reverted some changes. Revert this for
now to avoid having to solve that problem. We can redo it
on top of wireless-next with wireless merged back later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct kerneldoc warnings after commit a8dc26a0ec ("firmware:
exynos-acpm: introduce devm_acpm_get_by_node()") changed the function
prototype:
exynos-acpm.c:672: warning: Function parameter or struct member 'acpm_np' not described in 'acpm_get_by_node'
exynos-acpm.c:672: warning: expecting prototype for acpm_get_by_phandle(). Prototype was for acpm_get_by_node() instead
While touching the lines, change the name of device_node pointer to
'np' to match convention.
Fixes: a8dc26a0ec ("firmware: exynos-acpm: introduce devm_acpm_get_by_node()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504222051.7TqaSQ48-lkp@intel.com/
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20250424203308.402168-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
phy_filters holds the values as read from WFPC BIOS table.
Since also iwlmld is going to need it, move it to fw_runtime.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.357baa65950a.I01d22328b4c381d4c0064ad9bd36750911157f90@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
rxq->read is accessed without the rxq->lock in a few places,
Make sure to have the lock there.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.73725f207aaa.I1a3e4b6c5fd370e029fdacfcdc9ee335788afa98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This version has a new flag bit that indicates whether or not SMPS is
allowed for the MAC.
This only adds the API, the actual support will be done in other
patches.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250424153620.991ff01b8d16.Id0aa4061d7926753b03a13bf94ec1ac9e1d18745@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The IWL_DEV_INFO() macro has far too many arguments, and most
of the time they're just "ANY". Use C99 initializers in the
macro to clean that up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.877b65b940b5.Ic3a40afcd182b6e1802bb8f8a1a845b20608e328@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move some code that's only done when having received data out
of iwl_mld_rx_fill_status() and remove the two arguments that
are related to that. This simplifies the function for the no-
data case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.77010d6a6694.I2fd06b073460717d324245482110cb0381218526@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use u8_get_bits() instead of open-coding, and adjust the
name as well. Also don't use enum nl80211_band for the
variable holding an entirely different type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.c41058510800.Ic3f16ce2f0c991fde2cfe7bcd58ee3b875575fce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware statistics were previously reporting bogus/old
channel load values if the device hadn't been active on a
given channel; it'll report an unknown value now for those
statistics affected (channel_load and channel_load_not_by_us.)
Handle that by simply skipping the value, the averaging would
result in the exact same value as before.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.db5410318642.I4d2981f68b915ad335bb02c926e9289c2a60ea6c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware will support external FSEQ images, define the
necessary API for that. We're not yet using/shipping such,
so don't add code to load them for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.4f5acc3dff6c.Ic559d90376945c78495352a0d24b1d44ef887f2d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If there are two links on 5 GHz subbands that are separated
enough (using channels 36-64 and 100+) then we can support
EMLSR across those two links. Allow that in the logic.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.d568a26661d5.Ie4277945272c5bbf637957704fda34ea03ef28d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The return type of iwl_mld_emlsr_disallowed_with_link() is a u32
bitmap of exit reasons, but in the data structure confusion case
where the warning triggers, it returns false. Add a new reason
bit for this case so it doesn't return that EMLSR is possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.d1f8465e2b5e.I58c463c70801231a79b04c1ff600f41afcbb04f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In iwl_mld_emlsr_disallowed_with_link() the code uses an
enum for a bitmap of values from it, which doesn't really
make sense.Use u32 for the variable just like the return
value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250424153620.ddf54a728ec0.Ie2e8de150f67369c4e034452c5f1a15f85d2931c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ath12k:
Enable AHB support for IPQ5332.
Add monitor interface support to QCN9274.
Add MLO support to WCN7850.
Add 802.11d scan offload support to WCN7850.
ath11k:
Restore hibernation support
In addition, perform the usual set of bug fixes and cleanups across
all supported drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaAJ2WAAKCRAsFbugiYzL
exnBAQDcBNn9WWQnHOIo4YIY//8Rnw311troRh1V/NLNHTaMmAD9G8SCa8qbI/rs
gOxcP5XeDmR3LwKuw4/7emXucX9W+ww=
=mAEA
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20250418' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
Jeff Johnson says:
====================
ath.git patches for v6.16
ath12k:
Enable AHB support for IPQ5332.
Add monitor interface support to QCN9274.
Add MLO support to WCN7850.
Add 802.11d scan offload support to WCN7850.
ath11k:
Restore hibernation support
In addition, perform the usual set of bug fixes and cleanups across
all supported drivers.
====================
Change-Id: I6555e64d7434f3a5fed5faab25057be93106b18e
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Correct setup of D0i2 disable which was
by mistake set up to value 1 and use BIT(1) instead.
Fixes: 011529fe81 ("accel/ivpu: Implement D0i2 disable test mode")
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@linux.intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250416102629.384626-1-maciej.falkowski@linux.intel.com
Fix improper use of dct_active_percent field in DCT interrupt handler
causing DCT to never get enabled. Set dct_active_percent internally before
IPC to ensure correct driver value even if IPC fails.
Set default DCT value to 30 accordingly to HW architecture specification.
Fixes: a19bffb10c ("accel/ivpu: Implement DCT handling")
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250416102616.384577-1-maciej.falkowski@linux.intel.com
Switch from s_stream to enable_streams and disable_streams callbacks.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Replace the custom mutex in the imx334 driver with the V4L2 subdev state
lock for control synchronization. Initialize the subdev with
v4l2_subdev_init_finalize in imx334_probe, adding proper cleanup in error
paths and imx334_remove. This aligns the driver with V4L2 standards.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Runtime PM is fully initialized before calling
v4l2_async_register_subdev_sensor(). Moving the runtime PM initialization
earlier prevents potential access to an uninitialized or powered-down
device.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
pm_runtime_suspended() only checks the current runtime PM status and does
not modify it, making it ineffective in this context. This could result in
improper power management if the device remains active when removed.
This patch fixes the issue by introducing a check with
pm_runtime_status_suspended() to determine if the device is already
suspended. If it is not, it calls imx334_power_off() to power down the
device and then uses pm_runtime_set_suspended() to correctly update the
runtime PM status to suspended.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some controls may need the sensor to be powered on to update their
values. Currently, only the exposure control does this. To ensure
proper handling, the power-up sequence is moved outside the switch-case.
Additionally, VBLANK control is now processed earlier so its changes
can correctly affect other controls.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Configure the lane mode dynamically from the streaming
function instead of using a hardcoded value.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
[Sakari Ailus: Fix checkpatch.pl issue, lower Dynamically.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use the new common CCI register access helpers to replace the private
register access helpers in the imx334 driver. This simplifies the driver
by reducing the amount of code.
Acked-by: Shravan Chippa <Shravan.Chippa@microchip.com>
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Error handling in probe() can be a bit simpler with dev_err_probe().
also, Added missing newline characters (\n) in error messages.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
We use dma_get_mask() of auxdev device for calculate iova pfn limit.
This is always 32 bit mask as we do not initialize the mask (and we can
not do so, since dev->dev_mask is NULL anyways for auxdev).
Since we need 31 bit mask for non-secure mode use mmu_info->aperture_end
which is properly initialized to correct mask for both modes.
Fixes: daabc5c647 ("media: ipu6: not override the dma_ops of device in driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove unused dma_mask field and ipu-dma.h includes.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The clock frequency is often available via the clock itself and not read
by the driver from the "clock-frequency" property. Don't complain if the
property doesn't exist.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Generally any deviance from the standard is handled via CCS static data
nowadays and so not having quirks is expected. Don't warn about it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The I²C retry hack has been there in order to address transient I²C
register write access issues on a few very old sensors and possibly it has
addressed also first I²C access problems (device not responding until a
certain amount of time has passed) but that is now separately handled. The
retry hack has a good potential for introducing hard to debug problems in
updating sensor settings while streaming. Remove it and instead pass those
rare errors to the user space -- which is also what virtually all other
drivers do.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use read_poll_timeout() in polling the device after a reset, either hard
or soft. While at it, improve the related error message.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some sensors take longer to respond after reset than the spec-required
time. Try up to 1 s for the sensor to become accessible.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use pm_runtime_put_autosuspend() instead of pm_runtime_put()
to allow autosuspend. Set a 1000ms autosuspend delay in
imx219_probe() to improve power efficiency.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Switch from s_stream to enable_streams and disable_streams callbacks.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Convert the Analog Devices ad5820 to DT schema format.
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add in the ov02e10 driver from the Intel IPU6 repository.
Signed-off-by: Jingjing Xiong <jingjing.xiong@intel.com>
Co-developed-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hao Yao <hao.yao@intel.com>
Co-developed-by: Jim Lai <jim.lai@intel.com>
Signed-off-by: Jim Lai <jim.lai@intel.com>
Co-developed-by: You-Sheng Yang <vicamo.yang@canonical.com>
Signed-off-by: You-Sheng Yang <vicamo.yang@canonical.com>
Co-developed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add bindings for OVO2E10 a two lane MIPI CSI, two megapixel 1080p RGB
sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Furthermore, the "name" parameter in pcim_iomap_regions() and its
successor, pcim_iomap_region(), should always reflect the driver name,
whereas currently it is the device's name.
Replace the deprecated functions with pcim_iomap_region() and pass the
actual driver name.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region(), and pass the actual driver name
to that function.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
