Adding an unlikely() hint on the n < 0 comparison return path improves
run-time performance of the select() system call, the negative
value of n is very uncommon in normal select usage.
Benchmarking on an Debian based Intel(R) Core(TM) Ultra 9 285K with
a 6.15-rc1 kernel built with 14.2.0 using a select of 1000 file
descriptors with zero timeout shows a consistent call reduction from
258 ns down to 254 ns, which is a ~1.5% performance improvement.
Results based on running 25 tests with turbo disabled (to reduce clock
freq turbo changes), with 30 second run per test and comparing the number
of select() calls per second. The % standard deviation of the 25 tests
was 0.24%, so results are reliable.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/20250414092426.53529-1-colin.i.king@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Major linux distibutions have phased out support for 32-bit machines. Since
rxe is primarily used for development and testing, the benefit of
maintaining 32-bit support is minimal. This change simplifies ATOMIC WRITE
implementations and improves maintainability of the driver.
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://patch.msgid.link/20250421025101.3588139-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The BIT() macro is commonly used in the kernel.
Make use of it when converting a tag, fetched from the Successful NCQ
Commands log or the NCQ Command Error log, to a bit field.
This makes the code easier to read.
Suggested-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
While the SENSE DATA VALID field in the ACS-6 specification is 47 bits,
we are currently only fetching 32 bits, because these are the only bits
that we care about (these bits represent the tags (which can be 0-31)).
Thus, replace the existing logic with a simple get_unaligned_le32().
While at it, change the type of sense_valid to u32.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Use dev_dbg_once() instead of open-coding the once functionality.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
We don't require that bucket size is block size aligned (although it
should be!) - so we need to handle this in the journal code.
This fixes an assertion pop in jorunal_entry_close(), where the journal
entry overruns available space - after rounding it up to block size.
Fixes: https://github.com/koverstreet/bcachefs/issues/854
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Syzbot managed to come up with a filesystem where check/repair got
rather confused at finding a reflink pointer in the inodes btree.
Currently, the "key allowed in this btree" checks only apply at commit
time, not read time - for forwards compatibility. It seems this is too
loose.
Now, strict key type allowed checks apply:
- at commit time (no forward compatibility issues)
- for btree node pointers
- if it's a known btree, known key type, and the key type has the
"BKEY_TYPE_strict_btree_checks" flag.
This means we still have the option of using generic key types - e.g.
KEY_TYPE_error, KEY_TYPE_set - on more existing btrees in the future,
while most key types that are intended for only a specific btree get
stricter checks.
Reported-by: syzbot+baee8591f336cab0958b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now more often do repair automatically, without the user invoking
fsck - and sometimes that can involve fixing lots of errors, so let's
avoid flooding the dmesg log.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Don't set JOURNAL_running until we're also calling
journal_space_available() for the first time.
If JOURNAL_running is set, shutdown will write an empty journal entry -
but this will hit an assert in journal_entry_open() if we've never
called journal_space_available().
Reported-by: syzbot+53bb24d476ef8368a7f0@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
I had left the warning around but as a non-fatal error to get my gcc-15
builds going, but fixed up some of the most annoying warning cases so
that it wouldn't be *too* verbose.
Because I like the _concept_ of the warning, even if I detested the
implementation to shut it up.
It turns out the implementation to shut it up is even more broken than I
thought, and my "shut up most of the warnings" patch just caused fatal
errors on gcc-14 instead.
I had tested with clang, but when I upgrade my development environment,
I try to do it on all machines because I hate having different systems
to maintain, and hadn't realized that gcc-14 now had issues.
The ACPI case is literally why I wanted to have a *type* that doesn't
trigger the warning (see commit d5d45a7f26: "gcc-15: make
'unterminated string initialization' just a warning"), instead of
marking individual places as "__nonstring".
But gcc-14 doesn't like that __nonstring location that shut gcc-15 up,
because it's on an array of char arrays, not on one single array:
drivers/acpi/tables.c:399:1: error: 'nonstring' attribute ignored on objects of type 'const char[][4]' [-Werror=attributes]
399 | static const char table_sigs[][ACPI_NAMESEG_SIZE] __initconst __nonstring = {
| ^~~~~~
and my attempts to nest it properly with a type had failed, because of
how gcc doesn't like marking the types as having attributes, only
symbols.
There may be some trick to it, but I was already annoyed by the bad
attribute design, now I'm just entirely fed up with it.
I wish gcc had a proper way to say "this type is a *byte* array, not a
string".
The obvious thing would be to distinguish between "char []" and an
explicitly signed "unsigned char []" (as opposed to an implicitly
unsigned char, which is typically an architecture-specific default, but
for the kernel is universal thanks to '-funsigned-char').
But any "we can typedef a 8-bit type to not become a string just because
it's an array" model would be fine.
But "__attribute__((nonstring))" is sadly not that sane model.
Reported-by: Chris Clayton <chris2553@googlemail.com>
Fixes: 4b4bd8c50f ("gcc-15: acpi: sprinkle random '__nonstring' crumbles around")
Fixes: d5d45a7f26 ("gcc-15: make 'unterminated string initialization' just a warning")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RK3588 integrates the Analogix eDP 1.3 TX controller IP and the HDMI/eDP
TX Combo PHY based on a Samsung IP block. There are also two independent
eDP display interface with different address on RK3588 Soc.
The patch currently adds only the basic support, specifically RGB output
up to 4K@60Hz, without the tests for audio, PSR and other eDP 1.3 specific
features.
In additon, the above Analogix IP has always been utilized as eDP on
Rockchip platform, despite its capability to also support the DP v1.2.
Therefore, the newly added logs will contain the term 'edp' rather than
'dp'. And the newly added 'apb' reset control is to ensure the APB bus
of eDP controller works well on the RK3588 SoC.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-12-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Compared with RK3288/RK3399, the HBR2 link rate support is the main
improvement of RK3588 eDP TX controller, and there are also two
independent eDP display interfaces on RK3588 Soc.
The newly added 'apb' reset is to ensure the APB bus of eDP controller
works well on the RK3588 SoC.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-10-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Move drm_of_find_panel_or_bridge() a little later and combine it with
component_add() into a new function rockchip_dp_link_panel(). The function
will serve as done_probing() callback of devm_of_dp_aux_populate_bus(),
aiding to support for obtaining the eDP panel via the DP AUX bus.
If failed to get the panel from the DP AUX bus, it will then try the other
way to get panel information through the platform bus.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-9-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add analogix_dpaux_wait_hpd_asserted() to help confirm the HPD state
before doing AUX transfers.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-8-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The main modification is moving the DP AUX initialization from function
analogix_dp_bind() to analogix_dp_probe(). In order to get the EDID of
eDP panel during probing, it is also needed to advance PM operations to
ensure that eDP controller and phy are prepared for AUX transmission.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250310104114.2608063-7-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add two new functions: one to find &analogix_dp_device.plat_data via
&drm_dp_aux, and the other to get &analogix_dp_device.aux. Both of them
serve for the function of getting panel from DP AUX bus, which is why
they are included in a single commit.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-6-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
According to Documentation/devicetree/bindings/display/dp-aux-bus.yaml,
it is a good way to get panel through the DP AUX bus.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-5-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add support to configurate link rate, lane count, voltage swing and
pre-emphasis with phy_configure(). It is helpful in application scenarios
where analogix controller is mixed with the phy of other vendors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-4-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Remove the check related to CONFIG_PM in order to make the code more
concise, as the CONFIG_PM should be a required option for many drivers.
In addition, it is preferable to use devm_pm_runtime_enable() instead of
manually invoking pm_runtime_enable() followed by pm_runtime_disable().
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-3-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The IRQF_NO_AUTOEN can be used for the drivers that don't want
interrupts to be enabled automatically via devm_request_threaded_irq().
Using this flag can provide be more robust compared to the way of
calling disable_irq() after devm_request_threaded_irq() without the
IRQF_NO_AUTOEN flag.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-2-damon.ding@rock-chips.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The C sequence points are complicated things, and gcc-15 has apparently
added a warning for the case where an object is both used and modified
multiple times within the same sequence point.
That's a great warning.
Or rather, it would be a great warning, except gcc-15 seems to not
really be very exact about it, and doesn't notice that the modification
are to two entirely different members of the same object: the array
counter and the array entries.
So that seems kind of silly.
That said, the code that gcc complains about is unnecessarily
complicated, so moving the array counter update into a separate
statement seems like the most straightforward fix for these warnings:
drivers/net/wireless/intel/iwlwifi/mld/d3.c: In function ‘iwl_mld_set_netdetect_info’:
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1102:66: error: operation on ‘netdetect_info->n_matches’ may be undefined [-Werror=sequence-point]
1102 | netdetect_info->matches[netdetect_info->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mld/d3.c:1120:58: error: operation on ‘match->n_channels’ may be undefined [-Werror=sequence-point]
1120 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
side note: the code at that second warning is actively buggy, and only
works on little-endian machines that don't do strict alignment checks.
The code casts an array of integers into an array of unsigned long in
order to use our bitmap iterators. That happens to work fine on any
sane architecture, but it's still wrong.
This does *not* fix that more serious problem. This only splits the two
assignments into two statements and fixes the compiler warning. I need
to get rid of the new warnings in order to be able to actually do any
build testing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All of these cases are perfectly valid and good traditional C, but hit
by the "you're not NUL-terminating your byte array" warning.
And none of the cases want any terminating NUL character.
Mark them __nonstring to shut up gcc-15 (and in the case of the ak8974
magnetometer driver, I just removed the explicit array size and let gcc
expand the 3-byte and 6-byte arrays by one extra byte, because it was
the simpler change).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes two cases of explicit NUL padding that now causes warnings
because of '-Wunterminated-string-initialization' being part of -Wextra
in gcc-15.
Gcc is being silly in this case when it says that it truncates a NUL
terminator, because in these cases there were _multiple_ NUL characters.
But we can get rid of the warning by just simplifying the two
initializers that trigger the warning for me, so this does exactly that.
I'm not sure why the power supply code did that odd
.attr_name = #_name "\0",
pattern: it was introduced in commit 2cabeaf151 ("power: supply: core:
Cleanup power supply sysfs attribute list"), but that 'attr_name[]'
field is an explicitly sized character array in a statically initialized
variable, and a string initializer always has a terminating NUL _and_
statically initialized character arrays are zero-padded anyway, so it
really seems to be rather extraneous belt-and-suspenders.
The zero_uuid[16] initialization in drivers/md/bcache/super.c makes
perfect sense, but it isn't necessary for the same reasons, and not
worth the new gcc warning noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is not great: I'd much rather introduce a typedef that is a "ACPI
name byte buffer", and use that to mark these special 4-byte ACPI names
that do not use NUL termination.
But as noted in the previous commit ("gcc-15: make 'unterminated string
initialization' just a warning") gcc doesn't actually seem to support
that notion, so instead you have to just mark every single array
declaration individually.
So this is not pretty, but this gets rid of the bulk of the annoying
warnings during an allmodconfig build for me.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-15 enabling -Wunterminated-string-initialization in -Wextra by
default was done with the best intentions, but the warning is still
quite broken.
What annoys me about the warning is that this is a very traditional AND
CORRECT way to initialize fixed byte arrays in C:
unsigned char hex[16] = "0123456789abcdef";
and we use this all over the kernel. And the warning is fine, but gcc
developers apparently never made a reasonable way to disable it. As is
(sadly) tradition with these things.
Yes, there's "__attribute__((nonstring))", and we have a macro to make
that absolutely disgusting syntax more palatable (ie the kernel syntax
for that monstrosity is just "__nonstring").
But that attribute is misdesigned. What you'd typically want to do is
tell the compiler that you are using a type that isn't a string but a
byte array, but that doesn't work at all:
warning: ‘nonstring’ attribute does not apply to types [-Wattributes]
and because of this fundamental mis-design, you then have to mark each
instance of that pattern.
This is particularly noticeable in our ACPI code, because ACPI has this
notion of a 4-byte "type name" that gets used all over, and is exactly
this kind of byte array.
This is a sad oversight, because the warning is useful, but really would
be so much better if gcc had also given a sane way to indicate that we
really just want a byte array type at a type level, not the broken "each
and every array definition" level.
So now instead of creating a nice "ACPI name" type using something like
typedef char acpi_name_t[4] __nonstring;
we have to do things like
char name[ACPI_NAMESEG_SIZE] __nonstring;
in every place that uses this concept and then happens to have the
typical initializers.
This is annoying me mainly because I think the warning _is_ a good
warning, which is why I'm not just turning it off in disgust. But it is
hampered by this bad implementation detail.
[ And obviously I'm doing this now because system upgrades for me are
something that happen in the middle of the release cycle: don't do it
before or during travel, or just before or during the busy merge
window period. ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the invalid bt-en-sleep node. Not sure how it came into existence
but it seems the functionality is covered by the wcn-wlan-bt-en-state node:
wcn_wlan_bt_en: wcn-wlan-bt-en-state {
pins = "gpio116", "gpio117";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
This fixes the following warning:
arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dtb: pinctrl@f100000: Unevaluated properties are not allowed ('bt-en-sleep' was unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/qcom,x1e80100-tlmm.yaml#
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250416-fix-omnibook-dts-v1-1-2409220a7c6f@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Changes queued for v6.15 would have had the potential to break
bisectability and was therefor not accepted. Merge the whole set towards
v6.16, as this is no longer a concern.
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
assign_lock_key kernel/locking/lockdep.c:986 [inline]
register_lock_class+0x4a3/0x4c0 kernel/locking/lockdep.c:1300
__lock_acquire+0x99/0x1ba0 kernel/locking/lockdep.c:5110
lock_acquire kernel/locking/lockdep.c:5866 [inline]
lock_acquire+0x179/0x350 kernel/locking/lockdep.c:5823
__timer_delete_sync+0x152/0x1b0 kernel/time/timer.c:1644
rxe_qp_do_cleanup+0x5c3/0x7e0 drivers/infiniband/sw/rxe/rxe_qp.c:815
execute_in_process_context+0x3a/0x160 kernel/workqueue.c:4596
__rxe_cleanup+0x267/0x3c0 drivers/infiniband/sw/rxe/rxe_pool.c:232
rxe_create_qp+0x3f7/0x5f0 drivers/infiniband/sw/rxe/rxe_verbs.c:604
create_qp+0x62d/0xa80 drivers/infiniband/core/verbs.c:1250
ib_create_qp_kernel+0x9f/0x310 drivers/infiniband/core/verbs.c:1361
ib_create_qp include/rdma/ib_verbs.h:3803 [inline]
rdma_create_qp+0x10c/0x340 drivers/infiniband/core/cma.c:1144
rds_ib_setup_qp+0xc86/0x19a0 net/rds/ib_cm.c:600
rds_ib_cm_initiate_connect+0x1e8/0x3d0 net/rds/ib_cm.c:944
rds_rdma_cm_event_handler_cmn+0x61f/0x8c0 net/rds/rdma_transport.c:109
cma_cm_event_handler+0x94/0x300 drivers/infiniband/core/cma.c:2184
cma_work_handler+0x15b/0x230 drivers/infiniband/core/cma.c:3042
process_one_work+0x9cc/0x1b70 kernel/workqueue.c:3238
process_scheduled_works kernel/workqueue.c:3319 [inline]
worker_thread+0x6c8/0xf10 kernel/workqueue.c:3400
kthread+0x3c2/0x780 kernel/kthread.c:464
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
The root cause is as below:
In the function rxe_create_qp, the function rxe_qp_from_init is called
to create qp, if this function rxe_qp_from_init fails, rxe_cleanup will
be called to handle all the allocated resources, including the timers:
retrans_timer and rnr_nak_timer.
The function rxe_qp_from_init calls the function rxe_qp_init_req to
initialize the timers: retrans_timer and rnr_nak_timer.
But these timers are initialized in the end of rxe_qp_init_req.
If some errors occur before the initialization of these timers, this
problem will occur.
The solution is to check whether these timers are initialized or not.
If these timers are not initialized, ignore these timers.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Reported-by: syzbot+4edb496c3cad6e953a31@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4edb496c3cad6e953a31
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250419080741.1515231-1-yanjun.zhu@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The last use of rdma_res_to_id() was removed in 2020 by
commi t211cd9459fda ("RDMA: Add dedicated CM_ID resource tracker function")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250418165848.241305-1-linux@treblig.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If we don't allocate the MIN number of IRQs then we need to free what
we have and return -ENOMEM. The problem is this loop is off by one
so it frees an entry that wasn't allocated and it doesn't free the
first entry where i == 0.
Fixes: 3e0d3cb3fb ("ice, irdma: move interrupts code to irdma")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20250414234231.523-2-tatyana.e.nikolova@intel.com
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently iwdev->rf is allocated in irdma_probe(), but free in
irdma_ib_dealloc_device(). It can be misleading. Move the free to
irdma_remove() to be more obvious.
Freeing in irdma_ib_dealloc_device() leads to KASAN use-after-free
issue. Which can also lead to NULL pointer dereference. Fix this.
irdma_deinit_interrupts() can't be moved before freeing iwdef->rf,
because in this case deinit interrupts will be done before freeing irqs.
The simplest solution is to move kfree(iwdev->rf) to irdma_remove().
Reproducer:
sudo rmmod irdma
Minified splat(s):
BUG: KASAN: use-after-free in irdma_remove+0x257/0x2d0 [irdma]
Call Trace:
<TASK>
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kfree+0x253/0x450
? irdma_remove+0x257/0x2d0 [irdma]
kasan_report+0xed/0x120
? irdma_remove+0x257/0x2d0 [irdma]
irdma_remove+0x257/0x2d0 [irdma]
auxiliary_bus_remove+0x56/0x80
device_release_driver_internal+0x371/0x530
? kernfs_put.part.0+0x147/0x310
driver_detach+0xbf/0x180
bus_remove_driver+0x11b/0x2a0
auxiliary_driver_unregister+0x1a/0x50
irdma_exit_module+0x40/0x4c [irdma]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ice_free_rdma_qvector+0x2a/0xa0 [ice]
Call Trace:
? ice_free_rdma_qvector+0x2a/0xa0 [ice]
irdma_remove+0x179/0x2d0 [irdma]
auxiliary_bus_remove+0x56/0x80
device_release_driver_internal+0x371/0x530
? kobject_put+0x61/0x4b0
driver_detach+0xbf/0x180
bus_remove_driver+0x11b/0x2a0
auxiliary_driver_unregister+0x1a/0x50
irdma_exit_module+0x40/0x4c [irdma]
Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Closes: https://lore.kernel.org/netdev/8e533834-4564-472f-b29b-4f1cb7730053@linux.intel.com/
Fixes: 3e0d3cb3fb ("ice, irdma: move interrupts code to irdma")
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Link: https://patch.msgid.link/20250414234231.523-1-tatyana.e.nikolova@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Check PF capability flag whether the 4M, 1G, and 2G pages are
supported. Add these pages sizes to mana_ib, if supported.
Define possible page sizes in enum gdma_page_type and
remove unused enum atb_page_size.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-4-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IB_ZERO_BASED to the valid flags and use
the corresponding MR creation request for the zero
based memory.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-3-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add IB_ACCESS_REMOTE_ATOMIC to the valid flags for MRs and use
the corresponding flag bit during MR creation in the HW.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://patch.msgid.link/1744621234-26114-2-git-send-email-kotaranov@linux.microsoft.com
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x7d/0xa0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcf/0x610 mm/kasan/report.c:489
kasan_report+0xb5/0xe0 mm/kasan/report.c:602
rxe_queue_cleanup+0xd0/0xe0 drivers/infiniband/sw/rxe/rxe_queue.c:195
rxe_cq_cleanup+0x3f/0x50 drivers/infiniband/sw/rxe/rxe_cq.c:132
__rxe_cleanup+0x168/0x300 drivers/infiniband/sw/rxe/rxe_pool.c:232
rxe_create_cq+0x22e/0x3a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1109
create_cq+0x658/0xb90 drivers/infiniband/core/uverbs_cmd.c:1052
ib_uverbs_create_cq+0xc7/0x120 drivers/infiniband/core/uverbs_cmd.c:1095
ib_uverbs_write+0x969/0xc90 drivers/infiniband/core/uverbs_main.c:679
vfs_write fs/read_write.c:677 [inline]
vfs_write+0x26a/0xcc0 fs/read_write.c:659
ksys_write+0x1b8/0x200 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xaa/0x1b0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
In the function rxe_create_cq, when rxe_cq_from_init fails, the function
rxe_cleanup will be called to handle the allocated resources. In fact,
some memory resources have already been freed in the function
rxe_cq_from_init. Thus, this problem will occur.
The solution is to let rxe_cleanup do all the work.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://paste.ubuntu.com/p/tJgC42wDf6/
Tested-by: liuyi <liuy22@mails.tsinghua.edu.cn>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20250412075714.3257358-1-yanjun.zhu@linux.dev
Reviewed-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
During initialisation of Focusrite USB audio interfaces, -EPROTO is
sometimes returned from usb_set_interface(), which sometimes prevents
the device from working: subsequent usb_set_interface() and
uac_clock_source_is_valid() calls fail.
This patch adds up to 5 retries in endpoint_set_interface(), with a
delay starting at 5ms and doubling each time. 5 retries was chosen to
allow for longer than expected waits for the interface to start
responding correctly; in testing, a single 5ms delay was sufficient to
fix the issue.
Closes: https://github.com/geoffreybennett/fcp-support/issues/2
Cc: stable@vger.kernel.org
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/Z//7s9dKsmVxHzY2@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The speaker doesn't mute when plugged headphone.
This platform support 4ch speakers.
The speaker pin 0x14 wasn't fill verb table.
After assigned model ALC245_FIXUP_HP_SPECTRE_X360_EU0XXX.
The speaker can mute when headphone was plugged.
Fixes: aa8e3ef4fe ("ALSA: hda/realtek: Add quirks for various HP ENVY models")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/eb4c14a4d85740069c909e756bbacb0e@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The old development toolchain binaries were hosted in the or1k-gcc
development github repo release page. However, now that we have all
code upstream I cut releases from stable upstream tarballs. It does not
make sense to tag the or1k-gcc github repo releases for these stable
releases.
Update the toolchain binaries URL to point to where they are now hosted
on the or1k-toolchain-build github release page.
Signed-off-by: Stafford Horne <shorne@gmail.com>
The librecores.org mailing list was replaced with vger.kernel.org last
year after the old mail server went offline. Update the docs to reflect
the new list.
Signed-off-by: Stafford Horne <shorne@gmail.com>
Add cacheinfo support for OpenRISC.
Currently, a few CPU cache attributes pertaining to OpenRISC processors
are exposed along with other unrelated CPU attributes in the procfs file
system (/proc/cpuinfo). However, a few cache attributes remain unexposed.
Provide a mechanism that the generic cacheinfo infrastructure can employ
to expose these attributes via the sysfs file system. These attributes
can then be exposed in /sys/devices/system/cpu/cpuX/cache/indexN. Move
the implementation to pull cache attributes from the processor's
registers from arch/openrisc/kernel/setup.c with a few modifications.
This implementation is based on similar work done for MIPS and LoongArch.
Link: https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.4-rev0.pdf
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
According to the OpenRISC architecture manual, the dcache and icache may
not be present. When these caches are present, the invalidate and flush
registers may be absent. The current implementation does not perform
checks to verify their presence before utilizing cache registers, or
invalidating and flushing cache blocks.
Introduce new functions to detect the presence of cache components and
related special-purpose registers.
There are a few places where a range of addresses have to be flushed or
invalidated and the implementation is duplicated. Introduce new utility
functions and macros that generalize this implementation and reduce
duplication.
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
The "cpuinfo_or1k" structure currently has identical data members for
different cache components.
Remove these fields out of struct cpuinfo_or1k and into its own struct.
This reduces duplication while keeping cpuinfo_or1k extensible so more
cache descriptors can be added in the future.
Also add a new field "sets" to the new structure.
Signed-off-by: Sahil Siddiq <sahilcdq0@gmail.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaAR3JgAKCRDdBJ7gKXxA
jtmLAP9d1h4Y7BnjJ876oPm8s3GQoasiAP6AJw3hbK7rX880vwD8DqU1IM3bTBDu
Z9ro41MvytxWKRMEaaYUMcrh04l1IQk=
=Fcx+
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"16 hotfixes. 2 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are basically for MM although five are alterations to
MAINTAINERS"
[ Basic counting skills are clearly not a strictly necessary requirement
for kernel maintainers. - Linus ]
* tag 'mm-hotfixes-stable-2025-04-19-21-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
MAINTAINERS: add section for locking of mm's and VMAs
mm: vmscan: fix kswapd exit condition in defrag_mode
mm: vmscan: restore high-cpu watermark safety in kswapd
MAINTAINERS: add Pedro as reviewer to the MEMORY MAPPING section
mm/memory: move sanity checks in do_wp_page() after mapcount vs. refcount stabilization
mm, hugetlb: increment the number of pages to be reset on HVO
writeback: fix false warning in inode_to_wb()
docs: ABI: replace mcroce@microsoft.com with new Meta address
mm/gup: fix wrongly calculated returned value in fault_in_safe_writeable()
MAINTAINERS: add memory advice section
MAINTAINERS: add mmap trace events to MEMORY MAPPING
mm: memcontrol: fix swap counter leak from offline cgroup
MAINTAINERS: add MM subsection for the page allocator
MAINTAINERS: update SLAB ALLOCATOR maintainers
fs/dax: fix folio splitting issue by resetting old folio order + _nr_pages
mm/page_alloc: fix deadlock on cpu_hotplug_lock in __accept_page()
