This region is used for controlling the function of the PCIe IP. It is
compatible with "ti,j784s4-pcie-ctrl", add this here and use it with
the PCIe node.
Signed-off-by: Andrew Davis <afd@ti.com>
[j-choudhary@ti.com: Add changes to k3-j7200-evm-pcie1-ep.dtso]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250402113201.151195-4-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This region is used for controlling the function of the PCIe IP. It is
compatible with "ti,j784s4-pcie-ctrl", add this here and use it with
the PCIe nodes.
Signed-off-by: Andrew Davis <afd@ti.com>
[j-choudhary@ti.com: Add changes to k3-j721e-evm-pcie1-ep.dtso]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250402113201.151195-3-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add a pattern property for pcie-ctrl which can be part of this controller.
Signed-off-by: Andrew Davis <afd@ti.com>
[j-choudhary@ti.com: Change description and add example]
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250402113201.151195-2-j-choudhary@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The OV5640 device tree overlay incorrectly defined an I2C switch
instead of an I2C mux. According to the DT bindings, the correct
terminology and node definition should use "i2c-mux" instead of
"i2c-switch". Hence, update the same to avoid dtbs_check warnings.
Fixes: 635ed97151 ("arm64: dts: ti: k3-am62x: Add overlays for OV5640")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-8-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The IMX219 device tree overlay incorrectly defined an I2C switch
instead of an I2C mux. According to the DT bindings, the correct
terminology and node definition should use "i2c-mux" instead of
"i2c-switch". Hence, update the same to avoid dtbs_check warnings.
Fixes: 4111db03dc ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-7-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The IMX219 sensor device tree bindings do not include a clock-names
property. Remove the incorrectly added clock-names entry to avoid
dtbs_check warnings.
Fixes: 4111db03dc ("arm64: dts: ti: k3-am62x: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-6-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The device tree overlay for the IMX219 sensor requires three voltage
supplies to be defined: VANA (analog), VDIG (digital core), and VDDL
(digital I/O). Add the corresponding voltage supply definitions to
avoid dtbs_check warnings.
Fixes: f767eb9180 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-5-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The IMX219 sensor device tree bindings do not include a clock-names
property. Remove the incorrectly added clock-names entry to avoid
dtbs_check warnings.
Fixes: f767eb9180 ("arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Jai Luthra <jai.luthra@linux.dev>
Link: https://lore.kernel.org/r/20250415111328.3847502-4-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Update the vin-supply of the TLV71033 regulator from LM5141 (vsys_3v3)
to LM61460 (vsys_5v0) to match the schematics. Add a fixed regulator
node for the LM61460 5V supply to support this change.
AM68-SK schematics: https://www.ti.com/lit/zip/sprr463
Fixes: a266c180b3 ("arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-3-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add device tree nodes for two power regulators on the J721E SK board.
vsys_5v0: A fixed regulator representing the 5V supply output from the
LM61460 and vdd_sd_dv: A GPIO-controlled TLV71033 regulator.
J721E-SK schematics: https://www.ti.com/lit/zip/sprr438
Fixes: 1bfda92a3a ("arm64: dts: ti: Add support for J721E SK")
Cc: stable@vger.kernel.org
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250415111328.3847502-2-y-abhilashchandra@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Since serdes0 and serdes1 are now enabled by default within the SoC
file, it is no longer necessary to enable them in the board file.
Hence, remove the redundant 'status = "okay"' within the serdes0 and
serdes1 device-tree nodes.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250417123246.2733923-5-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Since serdes0 and serdes1 are the child nodes of serdes_wiz0 and
serdes_wiz1 respectively, and, given that serdes_wiz0 and serdes_wiz1
are already disabled, it is not necessary to disable serdes0 and serdes1.
Moreover, having serdes_wiz0/serdes_wiz1 enabled and serdes0/serdes1
disabled is not a working configuration.
Hence, remove 'status = "disabled"' from the serdes0 and serdes1 nodes.
Suggested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250417123246.2733923-4-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Since "serdes0" and "serdes1" which are the sub-nodes of "serdes_wiz0"
and "serdes_wiz1" respectively, have been disabled in the SoC file already,
and, given that these sub-nodes will only be enabled in a board file if the
board utilizes any of the SERDES instances and the peripherals bound to
them, we end up in a situation where the board file doesn't explicitly
disable "serdes_wiz0" and "serdes_wiz1". As a consequence of this, the
following errors show up when booting Linux:
wiz bus@f0000:phy@f000000: probe with driver wiz failed with error -12
...
wiz bus@f0000:phy@f010000: probe with driver wiz failed with error -12
To not only fix the above, but also, in order to follow the convention of
disabling device-tree nodes in the SoC file and enabling them in the board
files for those boards which require them, disable "serdes_wiz0" and
"serdes_wiz1" device-tree nodes.
Fixes: 628e0a0118 ("arm64: dts: ti: k3-j722s-main: Add SERDES and PCIe support")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250417123246.2733923-3-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
In preparation for disabling "serdes_wiz0" and "serdes_wiz1" device-tree
nodes in the SoC file, enable them in the board file. The motivation for
this change is that of following the existing convention of disabling
nodes in the SoC file and only enabling the required ones in the board
file.
Fixes: 485705df5d ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Cc: stable@vger.kernel.org
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20250417123246.2733923-2-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The "pinctrl-names" property is not required since it doesn't have an
associated pinctrl configuration. Hence, drop it.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20250411061425.640718-1-s-vadapalli@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add support for the Zcb extension's compressed half-word instructions
(C.LHU, C.LH, and C.SH) in the RISC-V misaligned access trap handler.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250411073850.3699180-2-nylon.chen@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----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=d3g0
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix integer overflow in server disconnect deadtime calculation
- Three fixes for potential use after frees: one for oplocks, and one
for leases and one for kerberos authentication
- Fix to prevent attempted write to directory
- Fix locking warning for durable scavenger thread
* tag 'v6.15-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Prevent integer overflow in calculation of deadtime
ksmbd: fix the warning from __kernel_write_iter
ksmbd: fix use-after-free in smb_break_all_levII_oplock()
ksmbd: fix use-after-free in __smb2_lease_break_noti()
ksmbd: fix WARNING "do not call blocking ops when !TASK_RUNNING"
ksmbd: Fix dangling pointer in krb_authenticate
CXL subsystem supports userspace to configure features via fwctl
interface, it will configure features by using Set Feature command.
Whatever Set Feature succeeds or fails, CXL driver always needs to
return a structure fwctl_rpc_cxl_out to caller, and returned size is
updated in a out_len parameter. The out_len should be updated not only
when the set feature succeeds, but also when the set feature fails.
Fixes: eb5dfcb9e3 ("cxl: Add support to handle user feature commands for set feature")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250410024521.514095-1-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Testing revealed the following error message for a CXL memdev that has
Feature support:
[ 56.690430] cxl mem0: Resources present before probing
Attach the allocation of cxl_fwctl to the parent device of cxl_memdev.
devm_add_* calls for cxl_memdev should not happen before the memdev
probe function or outside the scope of the memdev driver.
cxl_test missed this bug because cxl_test always arranges for the
cxl_mem driver to be loaded before cxl_mock_mem runs. So the driver core
always finds the devres list idle in that case.
[DJ: Updated subject title and added commit log suggestion from djbw]
Fixes: 858ce2f56b ("cxl: Add FWCTL support to CXL")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/linux-cxl/6801aea053466_71fe2944c@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://patch.msgid.link/20250418002933.406439-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Implement "ethtool --show-mm" callback for IGC.
Tested with command:
$ ethtool --show-mm enp1s0.
MAC Merge layer state for enp1s0:
pMAC enabled: on
TX enabled: on
TX active: on
TX minimum fragment size: 64
RX minimum fragment size: 60
Verify enabled: on
Verify time: 128
Max verify time: 128
Verification status: SUCCEEDED
Verified that the fields value are retrieved correctly.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since preemptible tc implementation is not ready yet, block it from being
set in taprio. The existing code already blocks it in mqprio.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for setting tx-min-frag-size via the set_mm callback in igc.
If the requested value is unsupported, round it up to the smallest
supported i226 size (64, 128, 192, 256) and send a netlink message to
inform the user.
Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch implements the "ethtool --set-mm" callback to trigger the
frame preemption verification handshake.
Uses the MAC Merge Software Verification (mmsv) mechanism in ethtool
to perform the verification handshake for igc.
The structure fpe.mmsv is set by mmsv in ethtool and should remain
read-only for the driver.
Other mmsv callbacks:
a) configure_tx() -> not used yet at this point
- igc lacks registers to configure FPE in the transmit direction, so
this API is not utilized for now. When igc supports preemptible queue,
driver will use this API to manage its configuration.
b) configure_pmac() -> not used
- this callback dynamically controls pmac_enabled at runtime. For
example, mmsv calls configure_pmac() and disables pmac_enabled when
the link partner goes down, even if the user previously enabled it.
The intention is to save power but it is not feasible in igc
because it causes an endless adapter reset loop:
1) Board A and Board B complete the verification handshake. Tx mode
register for both boards are in TSN mode.
2) Board B link goes down.
On Board A:
3) mmsv calls configure_pmac() with pmac_enabled = false.
4) configure_pmac() in igc updates a new field based on pmac_enabled.
Driver uses this field in igc_tsn_new_flags() to indicate that the
user enabled/disabled FPE.
5) configure_pmac() in igc calls igc_tsn_offload_apply() to check
whether an adapter reset is needed. Calls existing logic in
igc_tsn_will_tx_mode_change() and igc_tsn_new_flags().
6) Since pmac_enabled is now disabled and no other TSN feature is
active, igc_tsn_will_tx_mode_change() evaluates to true because Tx
mode will switch from TSN to Legacy.
7) Driver resets the adapter.
8) Registers are set, and Tx mode switches to Legacy.
9) When link partner is up, steps 3-8 repeat, but this time with
pmac_enabled = true, reactivating TSN.
igc_tsn_will_tx_mode_change() evaluates to true again, since Tx
mode will switch from Legacy to TSN.
10) Driver resets the adapter.
11) Adapter reset completes, registers are set, and Tx mode switches to
TSN.
On Board B:
12) Adapter reset on Board A at step 10 causes it to detect its link
partner as down.
13) Repeats steps 3-8.
14) Once reset adapter on Board A is completed at step 11, it detects
its link partner as up.
15) Repeats steps 9-11.
- this cycle repeats indefinitely. To avoid this issue, igc only uses
mmsv.pmac_enabled to track whether FPE is enabled or disabled.
Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----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=iVgS
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.15-20250418' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Correctly cap iov_iter->nr_segs for imports of registered buffers,
both kbuf and normal ones.
Three cleanups to make it saner first, then two fixes for each of the
buffer types.
This fixes a performance regression where partial buffer usage
doesn't trim the tail number of segments, leading the block layer to
iterate the IOs to check if it needs splitting.
- Two patches tweaking the newly introduced zero-copy rx API, mostly to
keep the API consistent once we add multiple interface queues per
ring support in the 6.16 release.
- zc rx unmapping fix for a dead device
* tag 'io_uring-6.15-20250418' of git://git.kernel.dk/linux:
io_uring/zcrx: fix late dma unmap for a dead dev
io_uring/rsrc: ensure segments counts are correct on kbuf buffers
io_uring/rsrc: send exact nr_segs for fixed buffer
io_uring/rsrc: refactor io_import_fixed
io_uring/rsrc: separate kbuf offset adjustments
io_uring/rsrc: don't skip offset calculation
io_uring/zcrx: add pp to ifq conversion helper
io_uring/zcrx: return ifq id to the user
In preparation for supporting frame preemption, when entering TSN mode,
set the receive packet buffer to 15KB for the Express MAC, 15KB for
the Preemptible MAC and 2KB for the BMC.
References:
I225/I226 SW User Manual, Section 4.7.9, Section 7.1.3.2, Section 8.3.1
The newly introduced macros follow the naming from the i226 SW User Manual
for easy reference.
Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Prepare for an upcoming patch that modifies the RX buffer size in TSN mode.
Refactor IGC_RXPBSIZE_EXP_BMC_DEFAULT and IGC_RXPBS_CFG_TS_EN using
FIELD_PREP and GENMASK to improve clarity and maintainability. Refactor
both macros for consistency, even though the upcoming patch only use
IGC_RXPBSIZE_EXP_BMC_DEFAULT.
The newly introduced macros follow the naming from the i226 SW User Manual
for easy reference.
I've tested IGC_RXPBSIZE_EXP_BMC_DEFAULT and IGC_RXPBS_CFG_TS_EN before
and after the refactoring, and their values remain unchanged.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation for upcoming frame preemption patches, optimize the TX
packet buffer size. The total packet buffer size (RX + TX) is 64KB, with
a maximum of 34KB for either RX or TX. Split the buffer evenly,
allocating 32KB to each.
For TX, assign 7KB to each of the four TX packet buffers (total 28KB)
and reserve 4KB for BMC.
References:
I225/I226 SW User Manual Section 4.7.9, Section 8.3.2
Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation for an upcoming patch that will modify the TX buffer size
in TSN mode, replace IGC_TXPBSIZE_TSN and IGC_TXPBSIZE_DEFAULT
implementation with new macros that utilizes FIELD_PREP and GENMASK for
clarity.
The newly introduced macros follow the naming from the i226 SW User Manual
for easy reference.
I've tested IGC_TXPBSIZE_TSN and IGC_TXPBSIZE_DEFAULT before and after the
refactoring, and their values remain unchanged.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rename RX and TX packet buffer size macros in preparation for an
upcoming patch that will refactor buffer size handling using FIELD_PREP
and GENMASK.
Changes:
- Rename I225_RXPBSIZE_DEFAULT to IGC_RXPBSIZE_EXP_BMC_DEFAULT.
The EXP_BMC suffix explicitly indicates Express and BMC buffer
default values, improving readability and reusability for the
upcoming changes, while also better reflecting the current buffer
allocations.
- Rename I225_TXPBSIZE_DEFAULT to IGC_TXPBSIZE_DEFAULT.
These registers apply to both i225 and i226, so using the IGC prefix
aligns with existing macro naming conventions.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Renamed xdp_get_tx_ring() function to a more generic name for use in
upcoming frame preemption patches.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the link partner goes down, "ethtool --show-mm" still displays
"Verification status: SUCCEEDED," reflecting a previous state that is
no longer valid.
Reset the verification status to ensure it reflects the current state.
Reviewed-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It appears that stmmac is not the only hardware which requires a
software-driven verification state machine for the MAC Merge layer.
While on the one hand it's good to encourage hardware implementations,
on the other hand it's quite difficult to tolerate multiple drivers
implementing independently fairly non-trivial logic.
Extract the hardware-independent logic from stmmac into library code and
put it in ethtool. Name the state structure "mmsv" for MAC Merge
Software Verification. Let this expose an operations structure for
executing the hardware stuff: sync hardware with the tx_active boolean
(result of verification process), enable/disable the pMAC, send mPackets,
notify library of external events (reception of mPackets), as well as
link state changes.
Note that it is assumed that the external events are received in hardirq
context. If they are not, it is probably a good idea to disable hardirqs
when calling ethtool_mmsv_event_handle(), because the library does not
do so.
Also, the MM software verification process has no business with the
tx_min_frag_size, that is all the driver's to handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The upcoming patch will extract verification logic into a new module,
MMSV (MAC Merge Software Verification). MMSV will handle most FPE fields,
except frag_size. It introduces its own lock (mmsv->lock), replacing
fpe_cfg->lock.
Since frag_size handling remains in the driver, the existing rtnl_lock()
is sufficient. Move frag_size handling out of spin_lock_irq_save() to keep
the upcoming patch a pure refactoring without behavior changes.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The mode setting logic in ad7816_store_mode was reversed due to
incorrect handling of the strcmp return value. strcmp returns 0 on
match, so the `if (strcmp(buf, "full"))` block executed when the
input was not "full".
This resulted in "full" setting the mode to AD7816_PD (power-down) and
other inputs setting it to AD7816_FULL.
Fix this by checking it against 0 to correctly check for "full" and
"power-down", mapping them to AD7816_FULL and AD7816_PD respectively.
Fixes: 7924425db0 ("staging: iio: adc: new driver for AD7816 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/stable/20250414152920.467505-1-gshahrouzi%40gmail.com
Link: https://patch.msgid.link/20250414154050.469482-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On architectures where an s64 is only 32-bit aligned insufficient padding
would be left between the earlier elements and the timestamp. Use
aligned_s64 to enforce the correct placement and ensure the storage is
large enough.
Fixes: 54e018da31 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer.
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On architectures where an s64 is not 64-bit aligned, this may result
insufficient alignment of the timestamp and the structure being too small.
Use aligned_s64 to force the alignment.
Fixes: a1caeebab0 ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-3-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO ABI requires 64-bit aligned timestamps. In this case insufficient
padding would have been added on architectures where an s64 is only 32-bit
aligned. Use aligned_s64 to enforce the correct alignment.
Fixes: 327a0eaf19 ("iio: accel: adxl355: Add triggered buffer support")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is
no overlap between buffers used for DMA and those used for driver
state storage that are before the marking. It doesn't ensure
anything above state variables found after the marking. Hence
move this particular bit of state earlier in the structure.
Fixes: 10897f3430 ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Align the buffer used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
