Cosmin Ratiu says:
====================
This patch series was motivated by fixing a few bugs in the bonding
driver related to xfrm state migration on device failover.
struct xfrm_dev_offload has two net_device pointers: dev and real_dev.
The first one is the device the xfrm_state is offloaded on and the
second one is used by the bonding driver to manage the underlying device
xfrm_states are actually offloaded on. When bonding isn't used, the two
pointers are the same.
This causes confusion in drivers: Which device pointer should they use?
If they want to support bonding, they need to only use real_dev and
never look at dev.
Furthermore, real_dev is used without proper locking from multiple code
paths and changing it is dangerous. See commit [1] for example.
This patch series clears things out by removing all uses of real_dev
from outside the bonding driver.
Then, the bonding driver is refactored to fix a couple of long standing
races and the original bug which motivated this patch series.
[1] commit f8cde98059 ("bonding: fix xfrm real_dev null pointer
dereference")
v2 -> v3:
Added a comment with locking expectations for real_dev.
Removed unnecessary bond variable from bond_ipsec_del_sa().
v1 -> v2:
Added missing kdoc for various functions.
Made bond_ipsec_del_sa() use xso.real_dev instead of curr_active_slave.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Introduce tc matchall filter offload support in airoha_eth driver.
Matchall hw filter is used to implement hw rate policing via tc action
police:
$tc qdisc add dev eth0 handle ffff: ingress
$tc filter add dev eth0 parent ffff: matchall action police \
rate 100mbit burst 1000k drop
The current implementation supports just drop/accept as exceed/notexceed
actions. Moreover, rate and burst are the only supported configuration
parameters.
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250415-airoha-hw-rx-ratelimit-v4-1-03458784fbc3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Clean up unused platform check macros from compat i915_drv.h. Display no
longer uses any of the IS_*() platform checks. The remaining users are
part of the soc/ code. Note that in a comment.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://lore.kernel.org/r/2f09b3c60223d9426049a28d3d06a3ec2c6ec348.1744222449.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Return -ENOMEM if udl_alloc_urb_list() fails. Don't return success.
Fixes: fb10144ba4 ("drm/udl: Support adapters without firmware descriptor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/Z_-P4N4_U-xTC9-O@stanley.mountain
Currently bdex_statx is only called from the very high-level
vfs_statx_path function, and thus bypassing it for in-kernel calls
to vfs_getattr or vfs_getattr_nosec.
This breaks querying the block ѕize of the underlying device in the
loop driver and also is a pitfall for any other new kernel caller.
Move the call into the lowest level helper to ensure all callers get
the right results.
Fixes: 2d985f8c6b ("vfs: support STATX_DIOALIGN on block devices")
Fixes: f4774e92aa ("loop: take the file system minimum dio alignment into account")
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250417064042.712140-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
GCC 15's new -Wunterminated-string-initialization notices that the
character lookup tables "fscache_cache_states" and "fscache_cookie_states"
(which are not used as a C-String) need to be marked as "nonstring":
fs/netfs/fscache_cache.c:375:67: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (6 chars into 5 available) [-Wunterminated-string-initialization]
375 | static const char fscache_cache_states[NR__FSCACHE_CACHE_STATE] = "-PAEW";
| ^~~~~~~
fs/netfs/fscache_cookie.c:32:69: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (11 chars into 10 available) [-Wunterminated-string-initialization]
32 | static const char fscache_cookie_states[FSCACHE_COOKIE_STATE__NR] = "-LCAIFUWRD";
| ^~~~~~~~~~~~
Annotate the arrays.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/20250416221654.work.028-kees@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 3f66425a4f ("cpufreq: Enable COMPILE_TEST on Arm drivers")
enabled compile testing of most Arm CPUFreq drivers but left the
existing default values unchanged so that many drivers are enabled by
default whenever COMPILE_TEST is selected.
This specifically results in the S3C64XX CPUFreq driver being enabled
and initialised during boot of non-S3C64XX platforms with the following
error logged:
cpufreq: Unable to obtain ARMCLK: -2
Commit d4f610a9ba ("cpufreq: Do not enable by default during compile
testing") recently fixed most of the default values, but two entries
were missed and two could use a more specific default condition.
Fix the default values for drivers that can be compile tested and that
should be enabled by default when not compile testing.
Fixes: 3f66425a4f ("cpufreq: Enable COMPILE_TEST on Arm drivers")
Cc: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Avoid an edge case where epoll_wait arms a timer and calls schedule()
even if the timer will expire immediately.
For example: if the user has specified an epoll busy poll usecs which is
equal or larger than the epoll_wait/epoll_pwait2 timeout, it is
unnecessary to call schedule_hrtimeout_range; the busy poll usecs have
consumed the entire timeout duration so it is unnecessary to induce
scheduling latency by calling schedule() (via schedule_hrtimeout_range).
This can be measured using a simple bpftrace script:
tracepoint:sched:sched_switch
/ args->prev_pid == $1 /
{
print(kstack());
print(ustack());
}
Before this patch is applied:
Testing an epoll_wait app with busy poll usecs set to 1000, and
epoll_wait timeout set to 1ms using the script above shows:
__traceiter_sched_switch+69
__schedule+1495
schedule+32
schedule_hrtimeout_range+159
do_epoll_wait+1424
__x64_sys_epoll_wait+97
do_syscall_64+95
entry_SYSCALL_64_after_hwframe+118
epoll_wait+82
Which is unexpected; the busy poll usecs should have consumed the
entire timeout and there should be no reason to arm a timer.
After this patch is applied: the same test scenario does not generate a
call to schedule() in the above edge case. If the busy poll usecs are
reduced (for example usecs: 100, epoll_wait timeout 1ms) the timer is
armed as expected.
Fixes: bf3b9f6372 ("epoll: Add busy poll support to epoll with socket fds.")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/20250416185826.26375-1-jdamato@fastly.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Test struct drm_gem_object.import_attach to detect imported objects.
During object clenanup, the dma_buf field might be NULL. Testing it in
an object's free callback then incorrectly does a cleanup as for native
objects. Happens for calls to drm_mode_destroy_dumb_ioctl() that
clears the dma_buf field in drm_gem_object_exported_dma_buf_free().
v3:
- only test for import_attach (Boris)
v2:
- use import_attach.dmabuf instead of dma_buf (Christian)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b57aa47d39 ("drm/gem: Test for imported GEM buffers with helper")
Reported-by: Andy Yan <andyshrk@163.com>
Closes: https://lore.kernel.org/dri-devel/38d09d34.4354.196379aa560.Coremail.andyshrk@163.com/
Tested-by: Andy Yan <andyshrk@163.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Anusha Srivatsa <asrivats@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250416065820.26076-1-tzimmermann@suse.de
Convert fsl,vf610-pinctrl.txt to yaml format.
Additional changes:
- subnode name force pattern to 'grp$' to align other imx chips.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/20250416150847.3422218-1-Frank.Li@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When EINT support for multiple addresses was introduced, the driver
library for the older generations (pinctrl-mtk-common) was not fixed
together. This resulted in invalid pointer accesses.
Fix up the filled in |struct mtk_eint| in pinctrl-mtk-common to match
what is now expected by the mtk-eint library.
Reported-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Closes: https://lore.kernel.org/all/43nd5jxpk7b7fv46frqlfjnqfh5jlpqsemeoakqzd4wdi3df6y@w7ycd3k5ezvn/
Fixes: 3ef9f710ef ("pinctrl: mediatek: Add EINT support for multiple addresses")
Cc: Hao Chang <ot_chhao.chang@mediatek.com>
Cc: Qingliang Li <qingliang.li@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/20250415112339.2385454-1-wenst@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ABX500 module depends hard on AB8500_CORE it cannot
be compile-tested in isolation.
Fixes: 720abc5c58 ("pinctrl: abx500: enable building modules with COMPILE_TEST=y")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250417-abx500-pinctrl-v1-1-0691ad29e2a6@linaro.org
Add the new binding document for pinctrl on MediaTek mt8196.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Signed-off-by: Cathy Xu <ot_cathy.xu@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/20250414090215.16091-2-ot_cathy.xu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add bindings for the pin controller found in the MediaTek
Dimensity 1200 (MT6983) SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250410144044.476060-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-6-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-5-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-4-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-3-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-2-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250410-gpiochip-set-rv-pinctrl-qcom-v1-1-6a6891338aae@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250324125105.81774-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Binding example should not contain other nodes, e.g. consumers of
pinctrl of, because this is completely redundant and adds unnecessary
bloat.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/20250324125105.81774-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
qcm2290 supports the egpio feature on GPIOs ranging from 98 to 126.
This change is necessary to allow these GPIOs to be driven by TLMM.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/20250409080030.62254-1-wojciech.slenska@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-10-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-9-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-8-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The pointer 'struct kmem_cache *dma_cmd_cache' was introduced in commit
'b0b4a6b105 ("dmaengine: ptdma: register PTDMA controller as a DMA
resource")' but it was never used.
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Reviewed-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250415121312.870124-1-ezulian@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix Smatch-detected issue:
drivers/dma/idxd/cdev.c:321 idxd_cdev_open() error:
uninitialized symbol 'sva'.
'sva' pointer may be used uninitialized in error handling paths.
Specifically, if PASID support is enabled and iommu_sva_bind_device()
returns an error, the code jumps to the cleanup label and attempts to
call iommu_sva_unbind_device(sva) without ensuring that sva was
successfully assigned. This triggers a Smatch warning about an
uninitialized symbol.
Initialize sva to NULL at declaration and add a check using
IS_ERR_OR_NULL() before unbinding the device. This ensures the
function does not use an invalid or uninitialized pointer during
cleanup.
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://lore.kernel.org/r/20250410110216.21592-1-purvayeshi550@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the lifetime, nolifetime and max_open_zones mount options
added for zoned rt file systems.
Also add documentation describing the max_open_zones sysfs attribute
exposed in /sys/fs/xfs/<dev>/zoned/
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The RTAS call ibm,physical-attestation is used to retrieve
information about the trusted boot state of the firmware and
hypervisor on the system, and also Trusted Platform Modules (TPM)
data if the system is TCG 2.0 compliant.
This RTAS interface expects the caller to define different command
structs such as RetrieveTPMLog, RetrievePlatformCertificat and etc,
in a work area with a maximum size of 4K bytes and the response
buffer will be returned in the same work area.
The current implementation of this RTAS function is in the user
space but allocation of the work area is restricted with the system
lockdown. So this patch implements this RTAS function in the kernel
and expose to the user space with open/ioctl/read interfaces.
PAPR (2.13+ 21.3 ibm,physical-attestation) defines RTAS function:
- Pass the command struct to obtain the response buffer for the
specific command.
- This RTAS function is sequence RTAS call and has to issue RTAS
call multiple times to get the complete response buffer (max 64K).
The hypervisor expects the first RTAS call with the sequence 1 and
the subsequent calls with the sequence number returned from the
previous calls.
Expose these interfaces to user space with a
/dev/papr-physical-attestation character device using the following
programming model:
int devfd = open("/dev/papr-physical-attestation");
int fd = ioctl(devfd, PAPR_PHY_ATTEST_IOC_HANDLE,
struct papr_phy_attest_io_block);
- The user space defines the command struct and requests the
response for any command.
- Obtain the complete response buffer and returned the buffer as
blob to the command specific FD.
size = read(fd, buf, len);
- Can retrieve the response buffer once or multiple times until the
end of BLOB buffer.
Implemented this new kernel ABI support in librtas library for
system lockdown
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-8-haren@linux.ibm.com
ibm,platform-dump RTAS call in combination with writable mapping
/dev/mem is issued to collect platform dump from the hypervisor
and may need multiple calls to get the complete dump. The current
implementation uses rtas_platform_dump() API provided by librtas
library to issue these RTAS calls. But /dev/mem access by the
user space is prohibited under system lockdown.
The solution should be to restrict access to RTAS function in user
space and provide kernel interfaces to collect dump. This patch
adds papr-platform-dump character driver and expose standard
interfaces such as open / ioctl/ read to user space in ways that
are compatible with lockdown.
PAPR (7.3.3.4.1 ibm,platform-dump) provides a method to obtain
the complete dump:
- Each dump will be identified by ID called dump tag.
- A sequence of RTAS calls have to be issued until retrieve the
complete dump. The hypervisor expects the first RTAS call with
the sequence 0 and the subsequent calls with the sequence
number returned from the previous calls.
- The hypervisor returns "dump complete" status once the complete
dump is retrieved. But expects one more RTAS call from the
partition with the NULL buffer to invalidate dump which means
the dump will be removed in the hypervisor.
- Sequence of calls are allowed with different dump IDs at the
same time but not with the same dump ID.
Expose these interfaces to user space with a /dev/papr-platform-dump
character device using the following programming model:
int devfd = open("/dev/papr-platform-dump", O_RDONLY);
int fd = ioctl(devfd,PAPR_PLATFORM_DUMP_IOC_CREATE_HANDLE, &dump_id)
- Restrict user space to access with the same dump ID.
Typically we do not expect user space requests the dump
again for the same dump ID.
char *buf = malloc(size);
length = read(fd, buf, size);
- size should be minimum 1K based on PAPR and <= 4K based
on RTAS work area size. It will be restrict to RTAS work
area size. Using 4K work area based on the current
implementation in librtas library
- Each read call issue RTAS call to get the data based on
the size requirement and returns bytes returned from the
hypervisor
- If the previous call returns dump complete status, the
next read returns 0 like EOF.
ret = ioctl(PAPR_PLATFORM_DUMP_IOC_INVALIDATE, &dump_id)
- RTAS call with NULL buffer to invalidates the dump.
The read API should use the file descriptor obtained from ioctl
based on dump ID so that gets dump contents for the corresponding
dump ID. Implemented support in librtas (rtas_platform_dump()) for
this new ABI to support system lockdown.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-7-haren@linux.ibm.com
The RTAS call ibm,get-dynamic-sensor-state is used to get the
sensor state identified by the location code and the sensor
token. The librtas library provides an API
rtas_get_dynamic_sensor() which uses /dev/mem access for work
area allocation but is restricted under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_SENSOR_IOC_GET to the papr-indices character
driver which executes this HCALL and copies the sensor state
in the user specified ioctl buffer.
Refer PAPR 7.3.19 ibm,get-dynamic-sensor-state for more
information on this RTAS call.
- User input parameters to the RTAS call: location code string
and the sensor token
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_SENSOR_IOC_GET,
struct papr_indices_io_block)
- The user space specifies input parameters in
papr_indices_io_block struct
- Returned state for the specified sensor is copied to
papr_indices_io_block.dynamic_param.state
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-6-haren@linux.ibm.com
The RTAS call ibm,set-dynamic-indicator is used to set the new
indicator state identified by a location code. The current
implementation uses rtas_set_dynamic_indicator() API provided by
librtas library which allocates RMO buffer and issue this RTAS
call in the user space. But /dev/mem access by the user space
is prohibited under system lockdown.
This patch provides an interface with new ioctl
PAPR_DYNAMIC_INDICATOR_IOC_SET to the papr-indices character
driver and expose this interface to the user space that is
compatible with lockdown.
Refer PAPR 7.3.18 ibm,set-dynamic-indicator for more
information on this RTAS call.
- User input parameters to the RTAS call: location code
string, indicator token and new state
Expose these interfaces to user space with a /dev/papr-indices
character device using the following programming model:
int fd = open("/dev/papr-indices", O_RDWR);
int ret = ioctl(fd, PAPR_DYNAMIC_INDICATOR_IOC_SET,
struct papr_indices_io_block)
- The user space passes input parameters in papr_indices_io_block
struct
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Sathvika Vasireddy <sv@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416225743.596462-5-haren@linux.ibm.com
