module_add_driver() relies on module_kset list for
/sys/module/<built-in-module>/drivers directory creation.
Since,
commit 96a1a2412a ("kernel/params.c: defer most of param_sysfs_init() to late_initcall time")
drivers which are initialized from subsys_initcall() or any other
higher precedence initcall couldn't find the related kobject entry
in the module_kset list because module_kset is not fully populated
by the time module_add_driver() refers it. As a consequence,
module_add_driver() returns early without calling make_driver_name().
Therefore, /sys/module/<built-in-module>/drivers is never created.
Fix this issue by letting module_add_driver() handle module_kobject
creation itself.
Fixes: 96a1a2412a ("kernel/params.c: defer most of param_sysfs_init() to late_initcall time")
Cc: stable@vger.kernel.org # requires all other patches from the series
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250227184930.34163-5-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
mic_name returned by devm_kasprintf() could be NULL.
Add a check for it.
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: bee2fe4467 ("ASoC: Intel: sof_sdw: use generic rtd_init function for Realtek SDW DMICs")
Link: https://patch.msgid.link/20250415194134.292830-1-chenyuan0y@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
lookup_or_create_module_kobject() is marked as static and __init,
to make it global drop static keyword.
Since this function can be called from non-init code, use __modinit
instead of __init, __modinit marker will make it __init if
CONFIG_MODULES is not defined.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-4-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
In the unlikely event of the allocation failing, it is better to let
the machine boot with a not fully populated sysfs than to kill it with
this BUG_ON(). All callers are already prepared for
lookup_or_create_module_kobject() returning NULL.
This is also preparation for calling this function from non __init
code, where using BUG_ON for allocation failure handling is not
acceptable.
Since we are here, also start using IS_ENABLED instead of #ifdef
construct.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-3-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The BCM2712 MIP driver is required for Raspberry PI5, but it's not
automatically enabled when ARCH_BCM2835 is enabled and depends on
ARCH_BRCMSTB.
ARCH_BCM2835 shares drivers with ARCH_BRCMSTB platforms, but Raspberry PI5
does not require the BRCMSTB specific drivers, which are selected via
ARCH_BRCMSTB.
Enable the interrupt controller for both ARCH_BRCMSTB and ARCH_BCM2835.
[ tglx: Massage changelog ]
Fixes: 32c6c05466 ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250416082523.179507-1-pbrobinson@gmail.com
The locate_module_kobject() function looks up an existing
module_kobject for a given module name. If it cannot find the
corresponding module_kobject, it creates one for the given name.
This commit renames locate_module_kobject() to
lookup_or_create_module_kobject() to better describe its operations.
This doesn't change anything functionality wise.
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
Link: https://lore.kernel.org/r/20250227184930.34163-2-shyamsaini@linux.microsoft.com
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
commit a5cfc9d658 ("thunderbolt: Add wake on connect/disconnect
on USB4 ports") introduced a sysfs file to control wake up policy
for a given USB4 port that defaulted to disabled.
However when testing commit 4bfeea6ec1 ("thunderbolt: Use wake
on connect and disconnect over suspend") I found that it was working
even without making changes to the power/wakeup file (which defaults
to disabled). This is because of a logic error doing a bitwise or
of the wake-on-connect flag with device_may_wakeup() which should
have been a logical AND.
Adjust the logic so that policy is only applied when wakeup is
actually enabled.
Fixes: a5cfc9d658 ("thunderbolt: Add wake on connect/disconnect on USB4 ports")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
A spurious TINT interrupt is seen during boot on RZ/G3E SMARC EVK.
A glitch in the edge detection circuit can cause a spurious interrupt.
Clear the status flag after setting the ICU_TSSRk registers, which is
recommended in the hardware manual as a countermeasure.
Fixes: 0d7605e75a ("irqchip: Add RZ/V2H(P) Interrupt Control Unit (ICU) driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
There is a spelling mistake in a cs48l32_fll_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250416081204.36851-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary return variable and compress the return logic.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250416041431.546370-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unnecessary return variable and compress the return logic.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250416041023.546311-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch added the function_status check to avoid the calibration again.
The codec driver reinitializes when the 'FUNCTION_NEEDS_INITIALIZATION' flag raises.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250416092528.737845-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the code to use faux bus for the dummy codec driver device instead
of creating a platform device. Also use KUnit automatic resource cleanup to
destroy the device instead of doing it "manually" in a test case exit()
function.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250416121604.780220-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250416101651.2128688-1-andriy.shevchenko@linux.intel.com
struct zynqmp_dp_audio :: components has codec component, but it is
used as dummy DAI. OTOH, We can use common snd_soc_dummy_dlc.
Let's use common dummy_dlc instead of own component.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/87ecxvr25o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Commit 579aee9fc5 ("powerpc: suppress some linker warnings in recent linker versions")
enabled support to add linker option "--no-warn-rwx-segments",
if the version is greater than 2.39. Similar build warning were
reported recently from linker version 2.35.2.
ld: warning: arch/powerpc/boot/zImage.epapr has a LOAD segment with RWX permissions
ld: warning: arch/powerpc/boot/zImage.pseries has a LOAD segment with RWX permissions
Fix the warning by checking for "--no-warn-rwx-segments"
option support in linker to enable it, instead of checking
for the version range.
Fixes: 579aee9fc5 ("powerpc: suppress some linker warnings in recent linker versions")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/61cf556c-4947-4bd6-af63-892fc0966dad@linux.ibm.com/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250401004218.24869-1-maddy@linux.ibm.com
When building with CONFIG_FORTIFY_SOURCE=y and W=1, there is a warning
because of the memcpy() in syscall_get_arguments():
In file included from include/linux/string.h:392,
from include/linux/bitmap.h:13,
from include/linux/cpumask.h:12,
from arch/riscv/include/asm/processor.h:55,
from include/linux/sched.h:13,
from kernel/ptrace.c:13:
In function 'fortify_memcpy_chk',
inlined from 'syscall_get_arguments.isra' at arch/riscv/include/asm/syscall.h:66:2:
include/linux/fortify-string.h:580:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
580 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
The fortified memcpy() routine enforces that the source is not overread
and the destination is not overwritten if the size of either field and
the size of the copy are known at compile time. The memcpy() in
syscall_get_arguments() intentionally overreads from a1 to a5 in
'struct pt_regs' but this is bigger than the size of a1.
Normally, this could be solved by wrapping a1 through a5 with
struct_group() but there was already a struct_group() applied to these
members in commit bba547810c ("riscv: tracing: Fix
__write_overflow_field in ftrace_partial_regs()").
Just avoid memcpy() altogether and write the copying of args from regs
manually, which clears up the warning at the expense of three extra
lines of code.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Dmitry V. Levin <ldv@strace.io>
Link: https://lore.kernel.org/r/20250409-riscv-avoid-fortify-warning-syscall_get_arguments-v1-1-7853436d4755@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Filesystems with an internal zoned rt section use xfs_rtblock_t values
that are relative to the start of the data device. When fsmap reports
on internal rt sections, it reports the space used by the data section
as "OWN_FS".
Unfortunately, the logic for resuming a query isn't quite right, so
xfs/273 fails because it stress-tests GETFSMAP with a single-record
buffer. If we enter the "report fake space as OWN_FS" block with a
nonzero key[0].fmr_length, we should add that to key[0].fmr_physical
and recheck if we still need to emit the fake record. We should /not/
just return 0 from the whole function because that prevents all rmap
record iteration.
If we don't enter that block, the resumption is still wrong.
keys[*].fmr_physical is a reflection of what we copied out to userspace
on a previous query, which means that it already accounts for rgstart.
It is not correct to add rtstart_daddr when computing start_rtb or
end_rtb, so stop that.
While we're at it, add a xfs_has_zoned to make it clear that this is a
zoned filesystem thing.
Fixes: e50ec7fac8 ("xfs: enable fsmap reporting for internal RT devices")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
During recovery/check operations, the process_checks function loops
through available disks to find a 'primary' source with successfully
read data.
If no suitable source disk is found after checking all possibilities,
the 'primary' index will reach conf->raid_disks * 2. Add an explicit
check for this condition after the loop. If no source disk was found,
print an error message and return early to prevent further processing
without a valid primary source.
Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
On x86_64 with gcc version 13.3.0, I compile kernel with:
make defconfig
./scripts/kconfig/merge_config.sh .config <(
echo CONFIG_COMPILE_TEST=y
)
make KCFLAGS="-fno-inline-functions -fno-inline-small-functions -fno-inline-functions-called-once"
Then I get a linker error:
ld: vmlinux.o: in function `pxp_fw_dependencies_completed':
kintel_pxp.c:(.text+0x95728f): undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
This is caused by not having a intel_pxp_gsccs_is_ready_for_sessions()
header stub for CONFIG_DRM_I915_PXP=n. Add it.
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Fixes: 99afb7cc8c ("drm/i915/pxp: Add ARB session creation and cleanup")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250415090616.2649889-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Refactor the bonding ipsec offload operations to fix a number of
long-standing control plane races between state migration and user
deletion and a few other issues.
xfrm state deletion can happen concurrently with
bond_change_active_slave() operation. This manifests itself as a
bond_ipsec_del_sa() call with x->lock held, followed by a
bond_ipsec_free_sa() a bit later from a wq. The alternate path of
these calls coming from xfrm_dev_state_flush() can't happen, as that
needs the RTNL lock and bond_change_active_slave() already holds it.
1. bond_ipsec_del_sa_all() might call xdo_dev_state_delete() a second
time on an xfrm state that was concurrently killed. This is bad.
2. bond_ipsec_add_sa_all() can add a state on the new device, but
pending bond_ipsec_free_sa() calls from the old device will then hit
the WARN_ON() and then, worse, call xdo_dev_state_free() on the new
device without a corresponding xdo_dev_state_delete().
3. Resolve a sleeping in atomic context introduced by the mentioned
"Fixes" commit.
bond_ipsec_del_sa_all() and bond_ipsec_add_sa_all() now acquire x->lock
and check for x->km.state to help with problems 1 and 2. And since
xso.real_dev is now a private pointer managed by the bonding driver in
xfrm state, make better use of it to fully fix problems 1 and 2. In
bond_ipsec_del_sa_all(), set xso.real_dev to NULL while holding both the
mutex and x->lock, which makes sure that neither bond_ipsec_del_sa() nor
bond_ipsec_free_sa() could run concurrently.
Fix problem 3 by moving the list cleanup (which requires the mutex) from
bond_ipsec_del_sa() (called from atomic context) to bond_ipsec_free_sa()
Finally, simplify bond_ipsec_del_sa() and bond_ipsec_free_sa() by using
xso->real_dev directly, since it's now protected by locks and can be
trusted to always reflect the offload device.
Fixes: 2aeeef906d ("bonding: change ipsec_lock from spin lock to mutex")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When the active link is changed for a bond device, the existing xfrm
states need to be migrated over to the new link. This is done with:
- bond_ipsec_del_sa_all() goes through the offloaded states list and
removes all of them from hw.
- bond_ipsec_add_sa_all() re-offloads all states to the new device.
But because the offload status of xfrm states isn't marked in any way,
there can be bugs.
When all bond links are down, bond_ipsec_del_sa_all() unoffloads
everything from the previous active link. If the same link then comes
back up, nothing gets reoffloaded by bond_ipsec_add_sa_all().
This results in a stack trace like this a bit later when user space
removes the offloaded rules, because mlx5e_xfrm_del_state() is asked to
remove a rule that's no longer offloaded:
[] Call Trace:
[] <TASK>
[] ? __warn+0x7d/0x110
[] ? mlx5e_xfrm_del_state+0x90/0xa0 [mlx5_core]
[] ? report_bug+0x16d/0x180
[] ? handle_bug+0x4f/0x90
[] ? exc_invalid_op+0x14/0x70
[] ? asm_exc_invalid_op+0x16/0x20
[] ? mlx5e_xfrm_del_state+0x73/0xa0 [mlx5_core]
[] ? mlx5e_xfrm_del_state+0x90/0xa0 [mlx5_core]
[] bond_ipsec_del_sa+0x1ab/0x200 [bonding]
[] xfrm_dev_state_delete+0x1f/0x60
[] __xfrm_state_delete+0x196/0x200
[] xfrm_state_delete+0x21/0x40
[] xfrm_del_sa+0x69/0x110
[] xfrm_user_rcv_msg+0x11d/0x300
[] ? release_pages+0xca/0x140
[] ? copy_to_user_tmpl.part.0+0x110/0x110
[] netlink_rcv_skb+0x54/0x100
[] xfrm_netlink_rcv+0x31/0x40
[] netlink_unicast+0x1fc/0x2d0
[] netlink_sendmsg+0x1e4/0x410
[] __sock_sendmsg+0x38/0x60
[] sock_write_iter+0x94/0xf0
[] vfs_write+0x338/0x3f0
[] ksys_write+0xba/0xd0
[] do_syscall_64+0x4c/0x100
[] entry_SYSCALL_64_after_hwframe+0x4b/0x53
There's also another theoretical bug:
Calling bond_ipsec_del_sa_all() multiple times can result in corruption
in the driver implementation if the double-free isn't tolerated. This
isn't nice.
Before the "Fixes" commit, xs->xso.real_dev was set to NULL when an xfrm
state was unoffloaded from a device, but a race with netdevsim's
.xdo_dev_offload_ok() accessing real_dev was considered a sufficient
reason to not set real_dev to NULL anymore. This unfortunately
introduced the new bugs.
Since .xdo_dev_offload_ok() was significantly refactored by [1] and
there are no more users in the stack of xso.real_dev, that
race is now gone and xs->xso.real_dev can now once again be used to
represent which device (if any) currently holds the offloaded rule.
Go one step further and set real_dev after add/before delete calls, to
catch any future driver misuses of real_dev.
[1] https://lore.kernel.org/netdev/cover.1739972570.git.leon@kernel.org/
Fixes: f8cde98059 ("bonding: fix xfrm real_dev null pointer dereference")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
validate_xmit_xfrm checks whether a packet already passed through it on
the master device (xso.dev) and skips processing the skb again on the
slave device (xso.real_dev).
This check was added in commit [1] to avoid tx packets on a bond device
pass through xfrm twice and get two sets of headers, but the check was
soon obsoleted by commit [2], which was added around the same time to
fix a similar but unrelated problem. Commit [3] set XFRM_XMIT only when
packets are hw offloaded.
xso.dev is usually equal to xso.real_dev, unless bonding is used, in
which case the bonding driver uses xso.real_dev to manage offloaded xfrm
states.
Since commit [3], the check added in commit [1] is unused on all cases,
since packets going through validate_xmit_xfrm twice bail out on the
check added in commit [2]. Here's a breakdown of relevant scenarios:
1. ESP offload off: validate_xmit_xfrm returns early on !xo.
2. ESP offload on, no bond: skb->dev == xso.real_dev == xso.dev.
3. ESP offload on, bond, xs on bond dev: 1st pass adds XFRM_XMIT, 2nd
pass returns early on XFRM_XMIT.
3. ESP offload on, bond, xs on slave dev: 1st pass returns early on
!xo, 2nd pass adds XFRM_XMIT.
4. ESP offload on, bond, xs on both bond AND slave dev: only 1 offload
possible in secpath. Either 1st pass adds XFRM_XMIT and 2nd pass returns
early on XFRM_XMIT, or 1st pass is sw and returns early on !xo.
6. ESP offload on, crypto fallback triggered in esp_xmit/esp6_xmit: 1st
pass does sw crypto & secpath_reset, 2nd pass returns on !xo.
This commit removes the unnecessary check, so xso.real_dev becomes what
it is in practice: a private field managed by bonding driver.
The check immediately below that can be simplified as well.
[1] commit 272c2330ad ("xfrm: bail early on slave pass over skb")
[2] commit 94579ac3f6 ("xfrm: Fix double ESP trailer insertion in
IPsec crypto offload.")
[3] commit c7dbf4c088 ("xfrm: Provide private skb extensions for
segmented and hw offloaded ESP packets")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The policy offload struct was reused from the state offload and
real_dev was copied from dev, but it was never set to anything else.
Simplify the code by always using xdo.dev for policies.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xso.real_dev is the active device of an offloaded xfrm state and is
managed by bonding. As such, it's subject to change when states are
migrated to a new device. Using it in places other than
offloading/unoffloading the states is risky.
This commit saves the device into the driver-specific struct
mlx5e_ipsec_sa_entry and switches mlx5e_ipsec_init_macs() and
mlx5e_ipsec_netevent_event() to make use of it.
Additionally, mlx5e_xfrm_update_stats() used xso.real_dev to validate
that correct net locks are held. But in a bonding config, the net of the
master device is the same as the underlying devices, and the net is
already a local var, so use that instead.
The only remaining references to xso.real_dev are now in the
.xdo_dev_state_add() / .xdo_dev_state_delete() path.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The is_vram() is checking the current placement, however if we consider
exported VRAM with dynamic dma-buf, it looks possible for the xe driver
to async evict the memory, notifying the importer, however importer does
not have to call unmap_attachment() immediately, but rather just as
"soon as possible", like when the dma-resv idles. Following from this we
would then pipeline the move, attaching the fence to the manager, and
then update the current placement. But when the unmap_attachment() runs
at some later point we might see that is_vram() is now false, and take
the complete wrong path when dma-unmapping the sg, leading to
explosions.
To fix this check if the sgl was mapping a struct page.
v2:
- The attachment can be mapped multiple times it seems, so we can't
really rely on encoding something in the attachment->priv. Instead
see if the page_link has an encoded struct page. For vram we expect
this to be NULL.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4563
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250410162716.159403-2-matthew.auld@intel.com
User is reporting what smells like notifier vs folio deadlock, where
migrate_pages_batch() on core kernel side is holding folio lock(s) and
then interacting with the mappings of it, however those mappings are
tied to some userptr, which means calling into the notifier callback and
grabbing the notifier lock. With perfect timing it looks possible that
the pages we pulled from the hmm fault can get sniped by
migrate_pages_batch() at the same time that we are holding the notifier
lock to mark the pages as accessed/dirty, but at this point we also want
to grab the folio locks(s) to mark them as dirty, but if they are
contended from notifier/migrate_pages_batch side then we deadlock since
folio lock won't be dropped until we drop the notifier lock.
Fortunately the mark_page_accessed/dirty is not really needed in the
first place it seems and should have already been done by hmm fault, so
just remove it.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4765
Fixes: 0a98219bcc ("drm/xe/hmm: Don't dereference struct page pointers without notifier lock")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250414132539.26654-2-matthew.auld@intel.com
There is a spelling mistake in fs/xfs/xfs_log.c. Fix it.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add the pinctrl header file on MediaTek mt8196.
Signed-off-by: Guodong Liu <guodong.liu@mediatek.com>
Signed-off-by: Cathy Xu <ot_cathy.xu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250414090215.16091-3-ot_cathy.xu@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
When filling the taskfile result for a successful NCQ command, we use
the SDB FIS from the FIS Receive Area, see e.g. ahci_qc_ncq_fill_rtf().
However, the SDB FIS only has fields STATUS and ERROR.
For a successful NCQ command that has sense data, we will have a
successful sense data descriptor, in the Sense Data for Successful NCQ
Commands log.
Since we have access to additional taskfile result fields, fill in these
additional fields in qc->result_tf.
This matches how for failing/aborted NCQ commands, we will use e.g.
ahci_qc_fill_rtf() to fill in some fields, but then for the command that
actually caused the NCQ error, we will use ata_eh_read_log_10h(), which
provides additional fields, saving additional fields/overriding the
qc->result_tf that was fetched using ahci_qc_fill_rtf().
Fixes: 18bd7718b5 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The ACPI byte code inside the ACPI control method responsible for
handling the WMI method calls uses a global buffer for constructing
the return value, yet the ACPI control method itself is not marked
as "Serialized".
This means that calling WMI methods on this WMI device is not
thread-safe, as concurrent WMI method calls will corrupt the global
buffer.
Fix this by serializing the WMI method calls using a mutex.
Cc: stable@vger.kernel.org # 6.x.x: 912d614ac9: platform/x86: msi-wmi-platform: Rename "data" variable
Fixes: 9c0beb6b29 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Returning a negative error code in a function with an unsigned
return type is a pretty bad idea. It is probably worse when the
justification for the change is "our static analisys tool found it".
Fixes: cf7de25878 ("cppc_cpufreq: Fix possible null pointer dereference")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The original function name came from an overly compressed form of
'fpstate_regs' by commit:
e61d6310a0 ("x86/fpu: Reset permission and fpstate on exec()")
However, the term 'fpregs' typically refers to physical FPU registers. In
contrast, this function copies the init values to fpu->fpstate->regs, not
hardware registers.
Rename the function to better reflect what it actually does.
No functional change.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-11-chang.seok.bae@intel.com
The variable was previously referenced in KVM code but the last usage was
removed by:
ea4d6938d4 ("x86/fpu: Replace KVMs home brewed FPU copy from user")
Remove its export symbol.
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-10-chang.seok.bae@intel.com
The signal delivery logic was modified to always set the PKRU bit in
xregs_state->header->xfeatures by this commit:
ae6012d72f ("x86/pkeys: Ensure updated PKRU value is XRSTOR'd")
However, the change derives the bitmask value using XGETBV(1), rather
than simply updating the buffer that already holds the value. Thus, this
approach induces an unnecessary dependency on XGETBV1 for PKRU handling.
Eliminate the dependency by using the established helper function.
Subsequently, remove the now-unused 'mask' argument.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250416021720.12305-9-chang.seok.bae@intel.com
Currently, saving register states in the signal frame, the legacy feature
bits are always set in xregs_state->header->xfeatures. This code sequence
can be generalized for reuse in similar cases.
Refactor the logic to ensure a consistent approach across similar usages.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-8-chang.seok.bae@intel.com
Not all paths that lead to fpu__init_disable_system_xstate() currently
emit a message indicating that XSAVE has been disabled. Move the print
statement into the function to ensure the message in all cases.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250416021720.12305-7-chang.seok.bae@intel.com
The extended general-purpose registers for APX may contain random data,
which is currently assumed by the xstate testing framework. This allows
the testing of the new userspace feature using the common test code.
Invoke the test entry function from apx.c after enumerating the
state component and adding it to the support list
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-6-chang.seok.bae@intel.com
With securing APX against conflicting MPX, it is now ready to be enabled.
Include APX in the enabled xfeature set.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-5-chang.seok.bae@intel.com
XSTATE components are architecturally independent. There is no rule
requiring their offsets in the non-compacted format to be strictly
ascending or mutually non-overlapping. However, in practice, such
overlaps have not occurred -- until now.
APX is introduced as xstate component 19, following AMX. In the
non-compacted XSAVE format, its offset overlaps with the space previously
occupied by the now-deprecated MPX feature:
45fc24e89b ("x86/mpx: remove MPX from arch/x86")
To prevent conflicts, the kernel must ensure the CPU never expose both
features at the same time. If so, it indicates unreliable hardware. In
such cases, XSAVE should be disabled entirely as a precautionary measure.
Add a sanity check to detect this condition and disable XSAVE if an
invalid hardware configuration is identified.
Note: MPX state components remain enabled on legacy systems solely for
KVM guest support.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-4-chang.seok.bae@intel.com
Advanced Performance Extensions (APX) is associated with a new state
component number 19. To support saving and restoring of the corresponding
registers via the XSAVE mechanism, introduce the component definition
along with the necessary sanity checks.
Define the new component number, state name, and those register data
type. Then, extend the size checker to validate the register data type
and explicitly list the APX feature flag as a dependency for the new
component in xsave_cpuid_features[].
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-3-chang.seok.bae@intel.com
Intel Advanced Performance Extensions (APX) introduce a new set of
general-purpose registers, managed as an extended state component via the
xstate management facility.
Before enabling this new xstate, define a feature flag to clarify the
dependency in xsave_cpuid_features[]. APX is enumerated under CPUID level
7 with EDX=1. Since this CPUID leaf is not yet allocated, place the flag
in a scattered feature word.
While this feature is intended only for userspace, exposing it via
/proc/cpuinfo is unnecessary. Instead, the existing arch_prctl(2)
mechanism with the ARCH_GET_XCOMP_SUPP option can be used to query the
feature availability.
Finally, clarify that APX depends on XSAVE.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-2-chang.seok.bae@intel.com
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
mt7622-bananapi-bpi-r64.dtb: asm_sel: $nodename:0: 'asm_sel' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
Link: https://lore.kernel.org/r/20250115211801.194247-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
These fields are no longer needed, so remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The x86 Poly1305 code never falls back to the generic code, so selecting
CRYPTO_LIB_POLY1305_GENERIC is unnecessary.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto/poly1305.c now registers a poly1305-$(ARCH) shash algorithm
that uses the architecture's Poly1305 library functions, individual
architectures no longer need to do the same. Therefore, remove the
redundant shash algorithm from the arch-specific code and leave just the
library functions there.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
