Follow the INT3 text-poking nomenclature, and also adopt the
'vector' name for the entire object, instead of the rather
opaque 'descriptor' naming.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-4-mingo@kernel.org
eBPF programs can be run 50,000,000 times per second on busy servers.
Whenever /proc/sys/kernel/bpf_stats_enabled is turned off,
hundreds of calls sites are patched from text_poke_bp_batch()
and we see a huge loss of performance due to false sharing
on bp_desc.refs lasting up to three seconds.
51.30% server_bin [kernel.kallsyms] [k] poke_int3_handler
|
|--46.45%--poke_int3_handler
| exc_int3
| asm_exc_int3
| |
| |--24.26%--cls_bpf_classify
| | tcf_classify
| | __dev_queue_xmit
| | ip6_finish_output2
| | ip6_output
| | ip6_xmit
| | inet6_csk_xmit
| | __tcp_transmit_skb
Fix this by replacing bp_desc.refs with a per-cpu bp_refs.
Before the patch, on a host with 240 cores (480 threads):
$ sysctl -wq kernel.bpf_stats_enabled=0
text_poke_bp_batch(nr_entries=164) : Took 2655300 usec
$ bpftool prog | grep run_time_ns
...
105: sched_cls name hn_egress tag 699fc5eea64144e3 gpl run_time_ns
3009063719 run_cnt 82757845 : average cost is 36 nsec per call
After this patch:
$ sysctl -wq kernel.bpf_stats_enabled=0
text_poke_bp_batch(nr_entries=164) : Took 702 usec
$ bpftool prog | grep run_time_ns
...
105: sched_cls name hn_egress tag 699fc5eea64144e3 gpl run_time_ns
1928223019 run_cnt 67682728 : average cost is 28 nsec per call
Ie. text-patching performance improved 3700x: from 2.65 seconds
to 0.0007 seconds.
Since the atomic_cond_read_acquire(refs, !VAL) spin-loop was not triggered
even once in my tests, add an unlikely() annotation, because this appears
to be the common case.
[ mingo: Improved the changelog some more. ]
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250411054105.2341982-2-mingo@kernel.org
Some stm32 implementations need the receive clock running in suspend,
as indicated by dwmac->ops->clk_rx_enable_in_suspend. The existing
code achieved this in a rather complex way, by passing a flag around.
However, the clk API prepare/enables are counted - which means that a
clock won't be stopped as long as there are more prepare and enables
than disables and unprepares, just like a reference count.
Therefore, we can simplify this logic by calling clk_prepare_enable()
an additional time in the probe function if this flag is set, and then
balancing that at remove time.
With this, we can avoid passing a "are we suspending" and "are we
resuming" flag to various functions in the driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the destination buffer has a fixed length, strscpy_pad()
automatically determines its size using sizeof() when the argument is
omitted. This makes the explicit sizeof() calls unnecessary - remove
them.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Initializing a percpu variable with the address of a struct tagged as
.initdata is breaking the build with CONFIG_SECTION_MISMATCH_WARN_ONLY
not set to "y".
Fix that by using an access function instead returning the .initdata
struct address if the percpu space of the struct hasn't been
allocated yet.
Fixes: 368990a7fe ("xen: fix multicall debug data referencing")
Reported-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Tested-by: "Borislav Petkov (AMD)" <bp@alien8.de>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250327190602.26015-1-jgross@suse.com>
NAND did not work on my USB-A9263. I discovered that the offending
commit converted the PIO bank for chip selects wrongly, so all A9263
boards need to be fixed.
Fixes: 1004a2977b ("ARM: dts: at91: Switch to the new NAND bindings")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402210446.5972-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Only the LPW variant has the external RTC. Move it to that board
specific DT. As a result, the common include for A9G20 boards can
go now.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402204856.5197-5-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
All devices use equal parameters in 'chosen'. So, the memory node can
be put into the most generic DTSI.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402204856.5197-4-wsa+renesas@sang-engineering.com
[claudiu.beznea: s/can bet put/can be put/g in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Do not use the kernel command line for specifying the default serial
console.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402204856.5197-3-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
All devices have 64MB RAM. So, the memory node can be put into the
most generic DTSI.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20250402204856.5197-2-wsa+renesas@sang-engineering.com
[claudiu.beznea: s/can bet put/can be put/g in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Dataflash did not work on my board. After checking schematics and using
the proper GPIO, it works now. Also, make it active low to avoid:
flash@0 enforce active low on GPIO handle
Fixes: 2432d20146 ("ARM: at91: dt: usb-a9263: add dataflash support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250404112742.67416-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Schematics and board layout indicate that versions with a dataflash
instead of an EEPROM might exist. Let's handle that once we have
hardware to test.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250403064336.4846-2-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
IPMMU registers almost-initialised instances, but misses assigning the
drvdata to make them fully functional, so initial calls back into
ipmmu_probe_device() are likely to fail unnecessarily. Reorder this to
work as it should, also pruning the long-out-of-date comment and adding
the missing sysfs cleanup on error for good measure.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: bcb81ac6ae ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/53be6667544de65a15415b699e38a9a965692e45.1742481687.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
bcm74110 adds a freerun utmi/ref clock that saves further power during
suspend states. A tune is also necessary to pass USB compliance test.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250402185159.2976920-3-justin.chen@broadcom.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
bcm74110 brcmstb usb phy adds further power savings during suspend
states.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250402185159.2976920-2-justin.chen@broadcom.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If iommu_device_register() encounters an error, it can end up tearing
down already-configured groups and default domains, however this
currently still leaves devices hooked up to iommu-dma (and even
historically the behaviour in this area was at best inconsistent across
architectures/drivers...) Although in the case that an IOMMU is present
whose driver has failed to probe, users cannot necessarily expect DMA to
work anyway, it's still arguable that we should do our best to put
things back as if the IOMMU driver was never there at all, and certainly
the potential for crashing in iommu-dma itself is undesirable. Make sure
we clean up the dev->dma_iommu flag along with everything else.
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Closes: https://lore.kernel.org/all/CAGXv+5HJpTYmQ2h-GD7GjyeYT7bL9EBCvu0mz5LgpzJZtzfW0w@mail.gmail.com/
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/e788aa927f6d827dd4ea1ed608fada79f2bab030.1744284228.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Generally all target supports Rate B but for very few like SM8550,
two sets of UFS PHY settings are provided, one set is to support
HS-G5 Rate A and another set is to support HS-G4 and lower
gears with Rate B.
Commit b02cc9a17679("phy: qcom-qmp-ufs: Add PHY Configuration support
for sm8750") apply Rate B setting for SM8550 gear 5 without checking
for mode value (Rate A or Rate B) from Controller driver which caused
issue as SM8550 support rate A for Gear 5.
Fix this by adding mode check before applying Rat B phy setting.
Fixes: b02cc9a176 ("phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/all/430ed11c-0490-45be-897b-27cad9682371@quicinc.com/
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250407121008.22230-1-quic_nitirawa@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Do not touch per-device DMA ops when the driver has been converted to use
the dma-iommu API.
Fixes: c588072bba ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Link: https://lore.kernel.org/r/20250403165605.278541-1-ptesarik@suse.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Set the posted MSI irq_chip's irq_ack() hook to irq_move_irq() instead of
a dummy/empty callback so that posted MSIs process pending changes to the
IRQ's SMP affinity. Failure to honor a pending set-affinity results in
userspace being unable to change the effective affinity of the IRQ, as
IRQD_SETAFFINITY_PENDING is never cleared and so irq_set_affinity_locked()
always defers moving the IRQ.
The issue is most easily reproducible by setting /proc/irq/xx/smp_affinity
multiple times in quick succession, as only the first update is likely to
be handled in process context.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: Robert Lippert <rlippert@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Wentao Yang <wentaoyang@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250321194249.1217961-1-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The current implementation uses bias_pad_enable as a reference count to
manage the shared bias pad for all UTMI PHYs. However, during system
suspension with connected USB devices, multiple power-down requests for
the UTMI pad result in a mismatch in the reference count, which in turn
produces warnings such as:
[ 237.762967] WARNING: CPU: 10 PID: 1618 at tegra186_utmi_pad_power_down+0x160/0x170
[ 237.763103] Call trace:
[ 237.763104] tegra186_utmi_pad_power_down+0x160/0x170
[ 237.763107] tegra186_utmi_phy_power_off+0x10/0x30
[ 237.763110] phy_power_off+0x48/0x100
[ 237.763113] tegra_xusb_enter_elpg+0x204/0x500
[ 237.763119] tegra_xusb_suspend+0x48/0x140
[ 237.763122] platform_pm_suspend+0x2c/0xb0
[ 237.763125] dpm_run_callback.isra.0+0x20/0xa0
[ 237.763127] __device_suspend+0x118/0x330
[ 237.763129] dpm_suspend+0x10c/0x1f0
[ 237.763130] dpm_suspend_start+0x88/0xb0
[ 237.763132] suspend_devices_and_enter+0x120/0x500
[ 237.763135] pm_suspend+0x1ec/0x270
The root cause was traced back to the dynamic power-down changes
introduced in commit a30951d31b ("xhci: tegra: USB2 pad power controls"),
where the UTMI pad was being powered down without verifying its current
state. This unbalanced behavior led to discrepancies in the reference
count.
To rectify this issue, this patch replaces the single reference counter
with a bitmask, renamed to utmi_pad_enabled. Each bit in the mask
corresponds to one of the four USB2 PHYs, allowing us to track each pad's
enablement status individually.
With this change:
- The bias pad is powered on only when the mask is clear.
- Each UTMI pad is powered on or down based on its corresponding bit
in the mask, preventing redundant operations.
- The overall power state of the shared bias pad is maintained
correctly during suspend/resume cycles.
The mutex used to prevent race conditions during UTMI pad enable/disable
operations has been moved from the tegra186_utmi_bias_pad_power_on/off
functions to the parent functions tegra186_utmi_pad_power_on/down. This
change ensures that there are no race conditions when updating the bitmask.
Cc: stable@vger.kernel.org
Fixes: a30951d31b ("xhci: tegra: USB2 pad power controls")
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20250408030905.990474-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The following crash is observed while handling an IOMMU fault with a
recent kernel:
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffff8c708299f700
PGD 19ee01067 P4D 19ee01067 PUD 101c10063 PMD 80000001028001e3
Oops: Oops: 0011 [#1] SMP NOPTI
CPU: 4 UID: 0 PID: 139 Comm: irq/25-AMD-Vi Not tainted 6.15.0-rc1+ #20 PREEMPT(lazy)
Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024
RIP: 0010:0xffff8c708299f700
Call Trace:
<TASK>
? report_iommu_fault+0x78/0xd3
? amd_iommu_report_page_fault+0x91/0x150
? amd_iommu_int_thread+0x77/0x180
? __pfx_irq_thread_fn+0x10/0x10
? irq_thread_fn+0x23/0x60
? irq_thread+0xf9/0x1e0
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
? kthread+0xfc/0x240
? __pfx_kthread+0x10/0x10
? ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
? ret_from_fork_asm+0x1a/0x30
</TASK>
report_iommu_fault() checks for an installed handler comparing the
corresponding field to NULL. It can (and could before) be called for a
domain with a different cookie type - IOMMU_COOKIE_DMA_IOVA, specifically.
Cookie is represented as a union so we may end up with a garbage value
treated there if this happens for a domain with another cookie type.
Formerly there were two exclusive cookie types in the union.
IOMMU_DOMAIN_SVA has a dedicated iommu_report_device_fault().
Call the fault handler only if the passed domain has a required cookie
type.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 6aa63a4ec9 ("iommu: Sort out domain user data")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250408213342.285955-1-pchelkin@ispras.ru
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Turns out we've added two similar debugfs files. Consolidate on
intel_display_caps as it has more info and a driver independent name.
IGT has already switched over to intel_display_caps in IGT commit
cf837fc17d6c ("lib/dsc: use intel_display_caps instead of
i915_display_capabilities").
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/241c5886cf2e95c694a693bb1b1953f6ae15390e.1744295009.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
There's a lockdep false positive warning related to i8253_lock:
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
...
systemd-sleep/3324 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb2c23398 (i8253_lock){+.+.}-{2:2}, at: pcspkr_event+0x3f/0xe0 [pcspkr]
...
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xd0/0x2f0
_raw_spin_lock+0x30/0x40
clockevent_i8253_disable+0x1c/0x60
pit_timer_init+0x25/0x50
hpet_time_init+0x46/0x50
x86_late_time_init+0x1b/0x40
start_kernel+0x962/0xa00
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xed/0xf0
common_startup_64+0x13e/0x141
...
Lockdep complains due pit_timer_init() using the lock in an IRQ-unsafe
fashion, but it's a false positive, because there is no deadlock
possible at that point due to init ordering: at the point where
pit_timer_init() is called there is no other possible usage of
i8253_lock because the system is still in the very early boot stage
with no interrupts.
But in any case, pit_timer_init() should disable interrupts before
calling clockevent_i8253_disable() out of general principle, and to
keep lockdep working even in this scenario.
Use scoped_guard() for that, as suggested by Thomas Gleixner.
[ mingo: Cleaned up the changelog. ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/Z-uwd4Bnn7FcCShX@gmail.com
Merge series from srinivas.kandagatla@linaro.org:
Update .mailmap and MAINTAINERS to point to the @kernel.org instead of
the @linaro.org. Linaro address will stop working in few days.
tests:
- Clean up struct drm_display_mode in various places
i915:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
xe:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
imagination:
- Fix overflow
- Fix use-after-free
ivpu:
- Fix suspend/resume
nouveau:
- Do not deref dangling pointer
rockchip:
- Set DP/HDMI registers correctly
udmabuf:
- Fix overflow
virtgpu:
- Set reservation lock on dma-buf import
- Fix error handling in prepare_fb
-----BEGIN PGP SIGNATURE-----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=8Pnf
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, as expected it has a bit more in it than probably usual
for rc2. amdgpu/xe/i915 lead the way with fixes all over for a bunch
of other drivers. Nothing major stands out from what I can see.
tests:
- Clean up struct drm_display_mode in various places
i915:
- Fix scanline offset for LNL+ and BMG+
- Fix GVT unterminated-string-initialization build warning
- Fix DP rate limit when sink doesn't support TPS4
- Handle GDDR + ECC memory type detection
- Fix VRR parameter change check
- Fix fence not released on early probe errors
- Disable render power gating during live selftests
xe:
- Add another BMG PCI ID
- Fix UAFs on migration paths
- Fix shift-out-of-bounds access on TLB invalidation
- Ensure ccs_mode is correctly set on gt reset
- Extend some HW workarounds to Xe3
- Fix PM runtime get/put on sysfs files
- Fix u64 division on 32b
- Fix flickering due to missing L3 invalidations
- Fix missing error code return
amdgpu:
- MES FW version caching fixes
- Only use GTT as a fallback if we already have a backing store
- dma_buf fix
- IP discovery fix
- Replay and PSR with VRR fix
- DC FP fixes
- eDP fixes
- KIQ TLB invalidate fix
- Enable dmem groups support
- Allow pinning VRAM dma bufs if imports can do P2P
- Workload profile fixes
- Prevent possible division by 0 in fan handling
amdkfd:
- Queue reset fixes
imagination:
- Fix overflow
- Fix use-after-free
ivpu:
- Fix suspend/resume
nouveau:
- Do not deref dangling pointer
rockchip:
- Set DP/HDMI registers correctly
udmabuf:
- Fix overflow
virtgpu:
- Set reservation lock on dma-buf import
- Fix error handling in prepare_fb"
* tag 'drm-fixes-2025-04-11-1' of https://gitlab.freedesktop.org/drm/kernel: (58 commits)
drm/rockchip: dw_hdmi_qp: Fix io init for dw_hdmi_qp_rockchip_resume
drm/rockchip: vop2: Fix interface enable/mux setting of DP1 on rk3588
drm/amdgpu/mes12: optimize MES pipe FW version fetching
drm/amd/pm/smu11: Prevent division by zero
drm/amdgpu: cancel gfx idle work in device suspend for s0ix
drm/amd/display: pause the workload setting in dm
drm/amdgpu/pm/swsmu: implement pause workload profile
drm/amdgpu/pm: add workload profile pause helper
drm/i915/huc: Fix fence not released on early probe errors
drm/i915/vrr: Add vrr.vsync_{start, end} in vrr_params_changed
drm/tests: probe-helper: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: modes: Fix drm_display_mode memory leak
drm/tests: cmdline: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: modeset: Fix drm_display_mode memory leak
drm/tests: helpers: Create kunit helper to destroy a drm_display_mode
drm/xe: Restore EIO errno return when GuC PC start fails
drm/xe: Invalidate L3 read-only cachelines for geometry streams too
drm/xe: avoid plain 64-bit division
...
The integrated PHY's of RTL8125/8126 have an own mechanism to access
PHY parameters, similar to what r8168g_phy_param does on earlier PHY
versions. Add helper rtl8125_phy_param to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/847b7356-12d6-441b-ade9-4b6e1539b84a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper for the Realtek-specific mechanism for accessing extended
config space if native access isn't possible.
This avoids code duplication.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/b368fd91-57d7-4cb5-9342-98b4d8fe9aea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the ip_route_output_key_cash_rcu function, the input fl4 member saddr is
first checked to be non-zero before entering multicast, broadcast and
arbitrary IP address checks. However, the fact that the IP address is not
0 has already ruled out the possibility of any address, so remove
unnecessary judgment.
Signed-off-by: Zhengchao Shao <shaozhengchao@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250409033321.108244-1-shaozhengchao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: c: basic netlink-raw support
Basic support for netlink-raw AKA classic netlink in user space C codegen.
This series is enough to read routes and addresses from the kernel
(see the samples in patches 12 and 13).
Specs need to be slightly adjusted and decorated with the c naming info.
In terms of codegen this series includes just the basic plumbing required
to skip genlmsghdr and handle request types which may technically also
be legal in genetlink-legacy but are very uncommon there.
Subsequent series will add support for:
- handling CRUD-style notifications
- code gen for array types classic netlink uses
- sub-message support
v1: https://lore.kernel.org/20250409000400.492371-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250410014658.782120-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL C can now generate code for simple classic netlink families.
Include rt-route in the Makefile for generation and add a sample.
$ ./tools/net/ynl/samples/rt-route
oif: wlp0s20f3 gateway: 192.168.1.1
oif: wlp0s20f3 dst: 192.168.1.0/24
oif: vpn0 dst: fe80::/64
oif: wlp0s20f3 dst: fe80::/64
oif: wlp0s20f3 gateway: fe80::200:5eff:fe00:201
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL C can now generate code for simple classic netlink families.
Include rt-addr in the Makefile for generation and add a sample.
$ ./tools/net/ynl/samples/rt-addr
lo: 127.0.0.1
wlp0s20f3: 192.168.1.101
lo: ::
wlp0s20f3: fe80::6385:be6:746e:8116
vpn0: fe80::3597:d353:b5a7:66dd
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Family names may include dashes. Fix notification handling
code gen to the c-compatible name.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the type for the response to do and dump are the same we don't
generate it twice. This is called "type_consistent" in the generator.
Consider operations which only have dump to also be consistent.
This removes unnecessary "_dump" from the names. There's a number
of GET ops in classic Netlink which only have dump handlers.
Make sure we output the "onesided" types, normally if the type
is consistent we only output it when we render the do structures.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250410014658.782120-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure the codegen calls the right YNL lib helper to start
the request based on family type. Classic netlink request must
not include the genl header.
Conversely don't expect genl headers in the responses.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
C codegen skips generating the structs if request/reply has no attrs.
In such cases the request op takes no argument and return int
(rather than response struct). In case of classic netlink a lot of
information gets passed using the fixed struct, however, so adjust
the logic to consider a request empty only if it has no attrs _and_
no fixed struct.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250410014658.782120-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Classic netlink has static family IDs specified in YAML,
there is no family name -> ID lookup. Support providing
the ID info to the library via the generated struct and
make library use it. Since NETLINK_ROUTE is ID 0 we need
an extra boolean to indicate classic_id is to be used.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add properties needed for C codegen to match names with uAPI headers.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The C codegen currently stores the fixed-header as part of family
info, so it only supports one fixed-header type per spec. Luckily
all rtm route message have the same fixed header so just move it up
to the higher level.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnetlink family names are set to rt-$name within the YAML
but the files are called rt_$name. C codegen assumes that the
generated file name will match the family. The use of dashes
is in line with our general expectation that name properties
in the spec use dashes not underscores (even tho, as Donald
points out most genl families use underscores in the name).
We have 3 un-ideal options to choose from:
- accept the slight inconsistency with old families using _, or
- accept the slight annoyance with all languages having to do s/-/_/
when looking up family ID, or
- accept the inconsistency with all name properties in new YAML spec
being separated with - and just the family name always using _.
Pick option 1 and rename the rtnl spec files.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list
of routes.") introduced a separated list for managing route expiration via
the GC timer.
However, it missed adding exception routes (created by ip6_rt_update_pmtu()
and rt6_do_redirect()) to this GC list. As a result, these exceptions were
never considered for expiration and removal, leading to stale entries
persisting in the routing table.
This patch fixes the issue by calling fib6_add_gc_list() in
rt6_insert_exception(), ensuring that exception routes are properly tracked
and garbage collected when expired.
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/837e7506ffb63f47faa2b05d9b85481aad28e1a4.1744134377.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long standing
sporadic crashes - mostly, but not entirely syzbot - in the crypto API
code when calling poly1305, which have been nigh impossible to reproduce
and debug. His rework deletes the code where we've seen the crashes, so
either it'll be a fix or we'll end up with backtraces we can debug.
(Thanks Eric!).
-----BEGIN PGP SIGNATURE-----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=DpNC
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long
standing sporadic crashes - mostly, but not entirely syzbot - in the
crypto API code when calling poly1305, which have been nigh impossible
to reproduce and debug.
His rework deletes the code where we've seen the crashes, so either
it'll be a fix or we'll end up with backtraces we can debug. (Thanks
Eric!)"
* tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs:
bcachefs: Use sort_nonatomic() instead of sort()
bcachefs: Remove unnecessary softdep on xxhash
bcachefs: use library APIs for ChaCha20 and Poly1305
bcachefs: Fix duplicate "ro,read_only" in opts at startup
bcachefs: Fix UAF in bchfs_read()
bcachefs: Use cpu_to_le16 for dirent lengths
bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket
bcachefs: Fix escape sequence in prt_printf
ASIX AX88772B based USB 10/100 Ethernet adapter doesn't come
up ("carrier off"), despite the built-in 100BASE-FX PHY positive link
indication. The internal PHY is configured (using EEPROM) in fixed
100 Mbps full duplex mode.
The primary problem appears to be using carrier_netif_{on,off}() while,
at the same time, delegating carrier management to phylink. Use only the
latter and remove "manual control" in the asix driver.
I don't have any other AX88772 board here, but the problem doesn't seem
specific to a particular board or settings - it's probably
timing-dependent.
Remove unused asix_adjust_link() as well.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/m3plhmdfte.fsf_-_@t19.piap.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
