Add palette support and export GAMMA properties via sysfs. User-space
compositors can use this interface for programming gamma ramps or night
mode.
Vesadrm supports palette updates via VGA DAC registers or VESA palette
calls. Up to 256 palette entries are available. Userspace always supplies
gamma ramps of 256 entries. If the native color format does not match
this because pixel component have less then 8 bits, vesadrm interpolates
among the palette entries.
The code uses CamelCase style in a few places to match the VESA manuals.
v3:
- fix coding style
v2:
- use CONFIG_X86_32 instead of __i386__ (checkpatch)
- protect struct vesadrm.pmi with CONFIG_X86_32
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-19-tzimmermann@suse.de
Enable the connector's EDID property if edid_info contains valid
data. Exports the EDID via sysfs for user-space compositors.
EDID information is not always available. Depending on the system
and kernel configuration, it is either provided by the boot loader
or read by the kernel during early boot stages.
There's only one VESA display, so EDID data always belongs to this
output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-18-tzimmermann@suse.de
Add support for screen_info setups with VIDEO_TYPE_VLFB. Provide the
minimum functionality of reading modes, updating and clearing the display.
There is existing support for these displays provided by simpledrm with
CONFIG_SYSFB_SIMPLEFB=y. Using vesadrm over simpledrm will allow for the
use of additional functionality provided by VESA, such as EDID information,
gamma correction and palette modes. This enhances the user experience and
adds support for more display configuratons.
v4:
- depend on CONFIG_X86
v3:
- depend on !SYSFB_SIMPLEFB (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-17-tzimmermann@suse.de
Enable the connector's EDID property if edid_info contains valid
data. Exports the EDID via sysfs for user-space compositors.
EDID information is not always available. Depending on the system
and kernel configuration, it is either provided by the boot loader
or read by the kernel during early boot stages.
As of now, there's only one EFI display, so that EDID data always
belongs to this output. This might change if there's ever more than
one EFI display in the system.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-16-tzimmermann@suse.de
Add support for screen_info setups with VIDEO_TYPE_EFI. Provide the
minimum functionality of reading modes, updating and clearing the display.
There is existing support for these displays provided by simpledrm with
CONFIG_SYSFB_SIMPLEFB=y. Using efidrm over simpledrm will allows for the
mapping of video memory with correct caching. Simpledrm always assumes WC
caching, while fully cached memory is possible with efidrm. Efidrm will
also allow for the use of additional functionality provided by EFI, such
as EDID information.
In addition to efidrm, add struct pixel_format plus initializer macros.
The type and macros describe pixel formats in a generic way on order to
find the DRM format from the screen_info settings. Similar existing code
in SIMPLEFB_FORMATS and fbdev is not really what is needed in efidrm,
but SIMPLEFB_FORMATS can later be converted to struct pixel_format.
v4:
- depend on CONFIG_EFI
- disallow module for now as efi_mem_desc_lookup() is not exported
v3:
- depend on !SYSFB_SIMPLEFB (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-15-tzimmermann@suse.de
Move the calculation of the bits per pixels for screen_info into a
helper function. This will make it available to other callers besides
the firmware code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-14-tzimmermann@suse.de
Add EDID support to sysfb connector helpers. Read the EDID property
from the OF node in ofdrm. Without EDID, this does nothing.
Some systems with OF display, such as 32-bit PPC Macintoshs, provide
the system display's EDID data as node property in their DT. Exporting
this information allows compositors to implement correct DPI and
meaningful color management.
v3:
- avoid parser error by clearing EDID extension field
v2:
- return errno codes on errors (Jani)
- simplify EDID read logic (Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-13-tzimmermann@suse.de
Merge the primary plane code of ofdrm and simpledrm. Replace the
plane implementation in each driver with the shared helpers. Set
up driver callbacks and format modifiers with initializer macros.
The plane code in ofdrm and simpledrm is very similar. Ofdrm has a
more sophisticated implementation of atomic_disable, which clears
individual scanlines. The code in simpledrm clears the whole buffer
at once. Take the ofdrm version.
Simpledrm supports get_scanout_buffer. Import it into the shared
helpers, which makes it available in ofdrm.
The supported formats are all native formats plus an optional enulated
XRGB8888 if that's not already a native format. Provide an initializer
macro that computes the size of the formats array.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-12-tzimmermann@suse.de
Merge the CRTC functions of ofdrm and simpledrm. Replace the code
in each driver with the shared helpers. Set up callbacks with
initializer macros.
Ofdrm supports a gamma LUT, while simpledrm does not. So far ofdrm's
LUT size has been hard-coded in the driver CRTC's atomic_check helper.
Now pass the size of the LUT to the sysfb device. Ofdrm's custom
atomic_flush is still required to apply changes to the LUT. Simpledrm
passes a LUT size of 0, which disables the gamma LUT.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-11-tzimmermann@suse.de
Move ofdrm's struct ofdrm_crtc_state plus functions to sysfb
helpers and rename everything to drm_sysfb_crtc_state.
The sysfb CRTC state is a regular CRTC state with information on
the primary plane's color format, as required for color management.
Helpers for sysfb planes will later set this up automatically.
In ofdrm and simpledrm, replace existing code with the new helpers.
Ofdrm continues to use the CRTC state for color management. This
has no effect on simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-10-tzimmermann@suse.de
Merge the connector functions of ofdrm and simpledrm. Replace the
code in each driver with the shared helpers. Set up callbacks with
initializer macros.
No effective code changes. The sysfb connector only returns the
preconfigured display mode.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-9-tzimmermann@suse.de
Provide initializer to set struct drm_mode_config_funcs. Convert
ofdrm and simpledrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-8-tzimmermann@suse.de
Merge the mode-init functions of ofdrm and simpledrm to the new helper
drm_sysfb_mode(). Also implement the DPI defaults there. Replace the
code in each driver with the shared helper.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-7-tzimmermann@suse.de
Add struct drm_sysfb_device that stores the system display's hardware
settings. Further helpers for the mode-setting pipeline will use these
fields. Convert ofdrm and simpledrm by embedding the sysfb device in
their device structs.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-6-tzimmermann@suse.de
The ofdrm and simpledrm drivers are special as they operate on
externally provided framebuffers. Move them into their own sub-
directory. Will let them share common code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-5-tzimmermann@suse.de
The helper drm_simple_encoder_init() is a trivial helper around
drm_encoder_init() and therefore deprecated. Open-code the function
and remove the dependency.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250401094056.32904-3-tzimmermann@suse.de
Remove undocumented compatible micron,mt25qu512a.
This fixes the dtbs warning: failed to match any schema with compatible:
['micron,mt25qu512a', 'jedec,spi-nor']
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250309184326.75452-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable SDHI1 on the RZ/G3E SMARC EVK platform using gpio regulator for
voltage switching.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250206134047.67866-9-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for enabling SD on SDHI0 on RZ/G3E SMARC SoM. It is enabled
by setting the macro SW_SD0_DEV_SEL to 1 in board DTS and setting the
switch SYS.1 to ON position on the SoM.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250206134047.67866-8-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for enabling SDHI internal regulator, by overriding the
status on the board DTS, when needed.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/20250206134047.67866-6-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Some functions used by the HVS->PV muxing tests can return with EDEADLK,
meaning the entire sequence should be restarted. It's not a fatal error
and we should treat it as a recoverable error, and recover, instead of
failing the test like we currently do.
Fixes: 76ec18dc5a ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-4-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The vc4-pv-muxing-combinations and vc5-pv-muxing-combinations test
suites use a common test init function which, in part, allocates the
drm atomic state the test will use.
That allocation relies on drm_kunit_helper_atomic_state_alloc(), and
thus requires a struct drm_modeset_acquire_ctx. This context will then
be stored in the allocated state->acquire_ctx field.
However, the context is local to the test init function, and is cleared
as soon as drm_kunit_helper_atomic_state_alloc() is done. We thus end up
with an dangling pointer to a cleared context in state->acquire_ctx for
our test to consumes.
We should really allocate the context and the state in the test
functions, so we can also control when we're done with it.
Fixes: 30188df0c3 ("drm/tests: Drop drm_kunit_helper_acquire_ctx_alloc()")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-3-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() are public
but aren't documented. Let's provide the documentation.
In particular, special care should be taken to deal with EDEADLK.
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-2-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() assert
that the functions they are calling didn't fail. Since some of them can
return EDEADLK, we can't properly deal with it.
Since both functions are expected to return an int, and all caller check
the return value, let's just properly propagate the errors when they
occur.
Fixes: f759f5b53f ("drm/vc4: tests: Introduce a mocking infrastructure")
Fixes: 76ec18dc5a ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-1-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The macro that is really defined is RISCV_HWPROBE_KEY_MIMPID, not
RISCV_HWPROBE_KEY_MIMPLID (difference is the 'L').
Also, the riscv privileged specification names the register "mimpid", not
"mimplid".
Correct these typos.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20240925142532.31808-1-namcao@linutronix.de
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
The number of relocations may be a huge value that is unallocatable
by kmalloc. Use kvmalloc instead so that it does not fail.
Fixes: 8fd6c51423 ("riscv: Add remaining module relocations")
Suggested-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Will Pierce <wgpierce17@gmail.com>
Link: https://lore.kernel.org/r/20250402081426.5197-1-wgpierce17@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Add reset controller driver for the T-HEAD TH1520 SoC that manages
hardware reset lines for various subsystems. The driver currently
implements support for GPU reset control, with infrastructure in place
to extend support for NPU and Watchdog Timer resets in future updates.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-3-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a YAML schema for the T-HEAD TH1520 SoC reset controller. This
controller manages resets for subsystems such as the GPU within the
TH1520 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-2-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Some SKUs of Xe2_HPD platforms (such as BMG) have GDDR memory type
with ECC enabled. We need to identify this scenario and add a new
case in xelpdp_get_dram_info() to handle it. In addition, the
derating value needs to be adjusted accordingly to compensate for
the limited bandwidth.
Bspec: 64602
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 3adcf970dc ("drm/xe/bmg: Drop force_probe requirement")
Cc: stable@vger.kernel.org
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324-tip-v2-1-38397de319f8@intel.com
(cherry picked from commit 327e30123c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
According to the DP spec TPS4 is mandatory for HBR3. We have
however seen some broken eDP sinks that violate this and
declare support for HBR3 without TPS4 support.
At least in the case of the icl Dell XPS 13 7390 this results
in an unstable output.
Reject HBR3 when TPS4 supports is unavailable on the sink.
v2: Leave breadcrumbs in dmesg to avoid head scratching (Jani)
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250306210740.11886-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 38188a7f57)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Initializing const char opregion_signature[16] = OPREGION_SIGNATURE
(which is "IntelGraphicsMem") drops the NUL termination of the
string. This is intentional, but the compiler doesn't know this.
Switch to initializing header->signature directly from the string
litaral, with sizeof destination rather than source. We don't treat the
signature as a string other than for initialization; it's really just a
blob of binary data.
Add a static assert for good measure to cross-check the sizes.
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/r/20250310222355.work.417-kees@kernel.org
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13934
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Cc: stable@vger.kernel.org
Reviewed-by: Zhenyu Wang <zhenyuw.linux@gmail.com>
Link: https://lore.kernel.org/r/20250327124739.2609656-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 4f82074690)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Forcewake timeout issue has been observed on Gen 12.0 and above.
To address this, disable Render Power-Gating (RPG) during live self-tests
for these generations. The temporary workaround 'drm/i915/mtl: do not
enable render power-gating on MTL' disables RPG globally, which is
unnecessary since the issues were only seen during self-tests.
v2: take runtime pm wakeref
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9413
Fixes: 25e7976db8 ("drm/i915/mtl: do not enable render power-gating on MTL")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310152821.2931678-1-sk.anirban@intel.com
(cherry picked from commit 0a4ae87706)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Turns out LNL+ and BMG+ no longer have the weird extra scanline
offset for HDMI outputs. Fix intel_crtc_scanline_offset()
accordingly so that scanline evasion/etc. works correctly on
HDMI outputs on these new platforms.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207215406.19348-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
(cherry picked from commit fede97b72b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Toradex ecgpiol16 is a 16-bit I2C I/O expander implemented using a
small MCU.
Its register interface and behavior are compatible with the PCAL6416.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250331072644.17921-1-francesco@dolcini.it
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
