mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-06 18:57:23 +00:00
1,399,042 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Johannes Weiner
|
7a95a05f15 |
mm: page_alloc: fix defrag_mode's retry & OOM path
Brendan points out that defrag_mode doesn't properly clear
ALLOC_NOFRAGMENT on its last-ditch attempt to allocate. But looking
closer, the problem is actually more severe: it doesn't actually *check*
whether it's already retried, and keeps looping. This means the OOM path
is never taken, and the thread can loop indefinitely.
This is verified with an intentional OOM test on defrag_mode=1, which
results in the machine hanging. After this patch, it triggers the OOM
kill reliably and recovers.
Clear ALLOC_NOFRAGMENT properly, and only retry once.
Link: https://lkml.kernel.org/r/20250401041231.GA2117727@cmpxchg.org
Fixes:
|
||
Lorenzo Stoakes
|
36eed54008 |
mm/mremap: do not set vrm->vma NULL immediately prior to checking it
This seems rather unwise. If we cannot merge, extend, then we need to
recall the original VMA to see if we need to uncharge.
If we do need to, do so.
Link: https://lkml.kernel.org/r/b2fb6b9c-376d-4e9b-905e-26d847fd3865@lucifer.local
Fixes:
|
||
Yosry Ahmed
|
c11bcbc0a5 |
mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead()
Currently, zswap_cpu_comp_dead() calls crypto_free_acomp() while holding
the per-CPU acomp_ctx mutex. crypto_free_acomp() then holds scomp_lock
(through crypto_exit_scomp_ops_async()).
On the other hand, crypto_alloc_acomp_node() holds the scomp_lock (through
crypto_scomp_init_tfm()), and then allocates memory. If the allocation
results in reclaim, we may attempt to hold the per-CPU acomp_ctx mutex.
The above dependencies can cause an ABBA deadlock. For example in the
following scenario:
(1) Task A running on CPU #1:
crypto_alloc_acomp_node()
Holds scomp_lock
Enters reclaim
Reads per_cpu_ptr(pool->acomp_ctx, 1)
(2) Task A is descheduled
(3) CPU #1 goes offline
zswap_cpu_comp_dead(CPU #1)
Holds per_cpu_ptr(pool->acomp_ctx, 1))
Calls crypto_free_acomp()
Waits for scomp_lock
(4) Task A running on CPU #2:
Waits for per_cpu_ptr(pool->acomp_ctx, 1) // Read on CPU #1
DEADLOCK
Since there is no requirement to call crypto_free_acomp() with the per-CPU
acomp_ctx mutex held in zswap_cpu_comp_dead(), move it after the mutex is
unlocked. Also move the acomp_request_free() and kfree() calls for
consistency and to avoid any potential sublte locking dependencies in the
future.
With this, only setting acomp_ctx fields to NULL occurs with the mutex
held. This is similar to how zswap_cpu_comp_prepare() only initializes
acomp_ctx fields with the mutex held, after performing all allocations
before holding the mutex.
Opportunistically, move the NULL check on acomp_ctx so that it takes place
before the mutex dereference.
Link: https://lkml.kernel.org/r/20250226185625.2672936-1-yosry.ahmed@linux.dev
Fixes:
|
||
Marc Herbert
|
1ca77ff183 |
mm/hugetlb: move hugetlb_sysctl_init() to the __init section
hugetlb_sysctl_init() is only invoked once by an __init function and is
merely a wrapper around another __init function so there is not reason to
keep it.
Fixes the following warning when toning down some GCC inline options:
WARNING: modpost: vmlinux: section mismatch in reference:
hugetlb_sysctl_init+0x1b (section: .text) ->
__register_sysctl_init (section: .init.text)
Link: https://lkml.kernel.org/r/20250319060041.2737320-1-marc.herbert@linux.intel.com
Signed-off-by: Marc Herbert <Marc.Herbert@linux.intel.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
Liu Shixin
|
a0a9f2180b |
mm: page_isolation: avoid calling folio_hstate() without hugetlb_lock
I found a NULL pointer dereference as followed:
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 5 UID: 0 PID: 5964 Comm: sh Kdump: loaded Not tainted 6.13.0-dirty #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.
RIP: 0010:has_unmovable_pages+0x184/0x360
...
Call Trace:
<TASK>
set_migratetype_isolate+0xd1/0x180
start_isolate_page_range+0xd2/0x170
alloc_contig_range_noprof+0x101/0x660
alloc_contig_pages_noprof+0x238/0x290
alloc_gigantic_folio.isra.0+0xb6/0x1f0
only_alloc_fresh_hugetlb_folio.isra.0+0xf/0x60
alloc_pool_huge_folio+0x80/0xf0
set_max_huge_pages+0x211/0x490
__nr_hugepages_store_common+0x5f/0xe0
nr_hugepages_store+0x77/0x80
kernfs_fop_write_iter+0x118/0x200
vfs_write+0x23c/0x3f0
ksys_write+0x62/0xe0
do_syscall_64+0x5b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
As has_unmovable_pages() call folio_hstate() without hugetlb_lock, there
is a race to free the HugeTLB page between PageHuge() and folio_hstate().
There is no need to add hugetlb_lock here as the HugeTLB page can be freed
in lot of places. So it's enough to unfold folio_hstate() and add a check
to avoid NULL pointer dereference for hugepage_migration_supported().
Link: https://lkml.kernel.org/r/20250122061151.578768-1-liushixin2@huawei.com
Fixes:
|
||
Yu Zhao
|
b98072af60 |
mm/hugetlb_vmemmap: fix memory loads ordering
Using x86_64 as an example, for a 32KB struct page[] area describing a 2MB
hugeTLB, HVO reduces the area to 4KB by the following steps:
1. Split the (r/w vmemmap) PMD mapping the area into 512 (r/w) PTEs;
2. For the 8 PTEs mapping the area, remap PTE 1-7 to the page mapped
by PTE 0, and at the same time change the permission from r/w to
r/o;
3. Free the pages PTE 1-7 used to map, hence the reduction from 32KB
to 4KB.
However, the following race can happen due to improperly memory loads
ordering:
CPU 1 (HVO) CPU 2 (speculative PFN walker)
page_ref_freeze()
synchronize_rcu()
rcu_read_lock()
page_is_fake_head() is false
vmemmap_remap_pte()
XXX: struct page[] becomes r/o
page_ref_unfreeze()
page_ref_count() is not zero
atomic_add_unless(&page->_refcount)
XXX: try to modify r/o struct page[]
Specifically, page_is_fake_head() must be ordered after page_ref_count()
on CPU 2 so that it can only return true for this case, to avoid the later
attempt to modify r/o struct page[].
This patch adds the missing memory barrier and makes the tests on
page_is_fake_head() and page_ref_count() done in the proper order.
Link: https://lkml.kernel.org/r/20250108074822.722696-1-yuzhao@google.com
Fixes:
|
||
Peter Xu
|
fe4cdc2c4e |
mm/userfaultfd: fix release hang over concurrent GUP
This patch should fix a possible userfaultfd release() hang during
concurrent GUP.
This problem was initially reported by Dimitris Siakavaras in July 2023
[1] in a firecracker use case. Firecracker has a separate process
handling page faults remotely, and when the process releases the
userfaultfd it can race with a concurrent GUP from KVM trying to fault in
a guest page during the secondary MMU page fault process.
A similar problem was reported recently again by Jinjiang Tu in March 2025
[2], even though the race happened this time with a mlockall() operation,
which does GUP in a similar fashion.
In 2017, commit
|
||
Linus Torvalds
|
28a1b05678 |
i2c-for-6.15-rc1
i2c-core updates (collected by Wolfram)
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi)
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz)
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros
-----BEGIN PGP SIGNATURE-----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=q/EK
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
|
||
Uday Shankar
|
f8554f512b |
selftests: ublk: kublk: fix an error log line
When doing io_uring operations using liburing, errno is not used to indicate errors, so the %m format specifier does not provide any relevant information for failed io_uring commands. Fix a log line emitted on get_params failure to translate the error code returned in the cqe->res field instead. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250401-ublk_selftests-v1-2-98129c9bc8bb@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Uday Shankar
|
53c959295b |
selftests: ublk: kublk: use ioctl-encoded opcodes
There are a couple of places in the kublk selftests ublk server which use the legacy ublk opcodes. These operations fail (with -EOPNOTSUPP) on a kernel compiled without CONFIG_BLKDEV_UBLK_LEGACY_OPCODES set. We could easily require it to be set as a prerequisite for these selftests, but since new applications should not be using the legacy opcodes, use the ioctl-encoded opcodes everywhere in kublk. Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250401-ublk_selftests-v1-1-98129c9bc8bb@purestorage.com Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Mateusz Guzik
|
1701771d30 |
x86/mm: Stop prefetching current->mm->mmap_lock on page faults
The prefetchw() dates back decades and the fundamental notion of doing something like this on a lock is shady. Moreover, for a few years now in the fast path faults are handled with RCU + per-vma locking, hopefully not even looking at the lock to begin with. As such just remove it. I did not see a point benchmarking this. Given that it is not expected to be looked at by default justifies not doing the prefetch. Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250401143520.1113572-1-mjguzik@gmail.com |
||
Baoquan He
|
2b00d9031e |
x86/mm: Simplify the pgd_leaf() and p4d_leaf() checks a bit
The functions return bool, simplify the checks. [ mingo: Split off from two other patches. ] Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20250331081327.256412-6-bhe@redhat.com |
||
|
Baoquan He
|
c083eff324 |
x86/mm: Remove the arch-specific p4d_leaf() definition
P4D huge pages are not supported yet, let's use the generic definition in <linux/pgtable.h>. [ mingo: Cleaned up the changelog. ] Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Link: https://lore.kernel.org/r/20250331081327.256412-7-bhe@redhat.com |
||
|
Baoquan He
|
b0510ac74e |
x86/mm: Remove the arch-specific pgd_leaf() definition
PGD huge pages are not supported yet, let's use the generic definition in <linux/pgtable.h>. [ mingo: Cleaned up the changelog. ] Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Link: https://lore.kernel.org/r/20250331081327.256412-6-bhe@redhat.com |
||
Xin Li (Intel)
|
e5f1e8af9c |
x86/fred: Fix system hang during S4 resume with FRED enabled
Upon a wakeup from S4, the restore kernel starts and initializes the FRED MSRs as needed from its perspective. It then loads a hibernation image, including the image kernel, and attempts to load image pages directly into their original page frames used before hibernation unless those frames are currently in use. Once all pages are moved to their original locations, it jumps to a "trampoline" page in the image kernel. At this point, the image kernel takes control, but the FRED MSRs still contain values set by the restore kernel, which may differ from those set by the image kernel before hibernation. Therefore, the image kernel must ensure the FRED MSRs have the same values as before hibernation. Since these values depend only on the location of the kernel text and data, they can be recomputed from scratch. Reported-by: Xi Pardee <xi.pardee@intel.com> Reported-by: Todd Brandt <todd.e.brandt@intel.com> Tested-by: Todd Brandt <todd.e.brandt@intel.com> Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com> Signed-off-by: Xin Li (Intel) <xin@zytor.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20250401075728.3626147-1-xin@zytor.com |
||
Shiju Jose
|
212120a164 |
Documentation/EDAC: Fix warning document isn't included in any toctree
Fix the build (htmldocs) warning:
Documentation/edac/index.rst: WARNING: document isn't included in any toctree.
Fixes:
|
||
Sohil Mehta
|
f2e01dcf6d |
x86/nmi: Improve NMI duration console printouts
Convert the last remaining printk() in nmi.c to pr_info(). Along with it, use timespec macros to calculate the NMI handler duration. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20250327234629.3953536-10-sohil.mehta@intel.com |
||
|
Sohil Mehta
|
05279a2863 |
x86/nmi: Clean up NMI selftest
The expected_testcase_failures variable in the NMI selftest has never
been set since its introduction. Remove this unused variable along with
the related checks to simplify the code.
While at it, replace printk() with the corresponding pr_{cont,info}()
calls. Also, get rid of the superfluous testname wrapper and the
redundant file path comment.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250327234629.3953536-9-sohil.mehta@intel.com
|
||
|
Sohil Mehta
|
7324d7de77 |
x86/nmi: Add missing description x86_platform_ops::get_nmi_reason to <asm/x86_init.h>
[ mingo: Split off from another patch. ] Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com |
||
|
Sohil Mehta
|
3b12927063 |
x86/nmi: Improve <asm/nmi.h> documentation
NMI handlers can be registered by various subsystems, including drivers. However, the interface for registering and unregistering such handlers is not clearly documented. In the future, the interface may need to be extended to identify the source of the NMI. Add documentation to make the current API more understandable and easier to use. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20250327234629.3953536-8-sohil.mehta@intel.com |
||
|
Sohil Mehta
|
59cddd397a |
x86/nmi: Improve and relocate NMI handler comments
Some of the comments in the default NMI handling code are out of place or inadequate. Move them to the appropriate locations and update them as needed. Move the comment related to CPU-specific NMIs closer to the actual code. Also, add more details about how back-to-back NMIs are detected since that isn't immediately obvious. Opportunistically, replace an #ifdef section in the vicinity with an IS_ENABLED() check to make the code easier to read. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20250327234629.3953536-7-sohil.mehta@intel.com |
||
|
Sohil Mehta
|
b4bc3144c1 |
x86/nmi: Fix comment in unknown_nmi_error()
The comment in unknown_nmi_error() is incorrect and misleading. There is no longer a restriction on having a single Unknown NMI handler. Also, nmi_handle() never used the 'b2b' parameter. The commits that made the comment outdated are: |
||
|
Sohil Mehta
|
6325f94701 |
x86/nmi: Remove export of local_touch_nmi()
Commit:
|
||
|
Sohil Mehta
|
4a8fba4be8 |
x86/nmi: Use a macro to initialize NMI descriptors
The NMI descriptors for each NMI type are stored in an array. However, they are currently initialized using raw numbers, which makes it difficult to understand the code. Introduce a macro to initialize the NMI descriptors using the NMI type enum values to make the code more readable. No functional change intended. Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20250327234629.3953536-4-sohil.mehta@intel.com |
||
|
Sohil Mehta
|
78a0323506 |
x86/nmi: Consolidate NMI panic variables
Commit:
|
||
|
Sohil Mehta
|
2e016da1cb |
x86/nmi: Simplify unknown NMI panic handling
The unknown_nmi_panic variable is used to control whether the kernel should panic on unknown NMIs. There is a sysctl entry under: /proc/sys/kernel/unknown_nmi_panic which can be used to change the behavior at runtime. However, it seems that in some places, the option unnecessarily depends on CONFIG_X86_LOCAL_APIC. Other code in nmi.c uses unknown_nmi_panic without such a dependency. This results in a few messy #ifdefs splattered across the code. The dependency was likely introduce due to a potential build bug reported a long time ago: https://lore.kernel.org/lkml/40BC67F9.3000609@myrealbox.com/ This build bug no longer exists. Also, similar NMI panic options, such as panic_on_unrecovered_nmi and panic_on_io_nmi, do not have an explicit dependency on the local APIC either. Though, it's hard to imagine a production system without the local APIC configuration, making a specific NMI sysctl option dependent on it doesn't make sense. Remove the explicit dependency between unknown NMI handling and the local APIC to make the code cleaner and more consistent. While at it, reorder the header includes to maintain alphabetical order. [ mingo: Cleaned up the changelog a bit, truly ordered the headers ... ] Signed-off-by: Sohil Mehta <sohil.mehta@intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/r/20250327234629.3953536-2-sohil.mehta@intel.com |
||
Dmitry Osipenko
|
395cc80051 |
drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb()
Correct error handling in prepare_fb() to fix leaking resources when
error happens.
Fixes:
|
||
|
Dmitry Osipenko
|
7cf6dd467e |
drm/virtio: Don't attach GEM to a non-created context in gem_object_open()
The vfpriv->ctx_id is always initialized to a non-zero value. Check whether
context was created before attaching GEM to this context ID. This left
unnoticed previously because host silently skips attachment if context
doesn't exist, still we shouldn't do that for consistency.
Fixes:
|
||
David Wei
|
fcfd94d696 |
io_uring/zcrx: return early from io_zcrx_recv_skb if readlen is 0
When readlen is set for a recvzc request, tcp_read_sock() will call
io_zcrx_recv_skb() one final time with len == desc->count == 0. This is
caused by the !desc->count check happening too late. The offset + 1 !=
skb->len happens earlier and causes the while loop to continue.
Fix this in io_zcrx_recv_skb() instead of tcp_read_sock(). Return early
if len is 0 i.e. the read is done.
Fixes:
|
||
|
Linus Torvalds
|
91e5bfe317 |
dmaengine updates for v6.15
New support:
- Microchip sama7d65 dma controller
- Yaml conversion of atmel dma binding and Freescale Elo DMA Controller
binding
Core:
- Remove device_prep_dma_imm_data() API as users are removed
- Reduce scope of some less frequently used DMA request channel APIs with
aim to cleanup these in future
Updates:
- Drop Fenghua Yu from idxd maintainers, as he changed jobs
- AMD ptdma support for multiqueue and ae4dma deprecated PCI IDs removal
-----BEGIN PGP SIGNATURE-----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=+jhe
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"The dmaengine subsystem updates for this cycle consist of a new driver
(Microchip) along with couple of yaml binding conversions, core api
updates and bunch of driver updates etc.
New HW support:
- Microchip sama7d65 dma controller
- Yaml conversion of atmel dma binding and Freescale Elo DMA
Controller binding
Core:
- Remove device_prep_dma_imm_data() API as users are removed
- Reduce scope of some less frequently used DMA request channel APIs
with aim to cleanup these in future
Updates:
- Drop Fenghua Yu from idxd maintainers, as he changed jobs
- AMD ptdma support for multiqueue and ae4dma deprecated PCI IDs
removal"
* tag 'dmaengine-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (29 commits)
dmaengine: ptdma: Utilize the AE4DMA engine's multi-queue functionality
dmaengine: ae4dma: Use the MSI count and its corresponding IRQ number
dmaengine: ae4dma: Remove deprecated PCI IDs
dmaengine: Remove device_prep_dma_imm_data from struct dma_device
dmaengine: ti: edma: support sw triggered chans in of_edma_xlate()
dmaengine: ti: k3-udma: Enable second resource range for BCDMA and PKTDMA
dmaengine: fsl-edma: free irq correctly in remove path
dmaengine: fsl-edma: cleanup chan after dma_async_device_unregister
dt-bindings: dma: snps,dw-axi-dmac: Allow devices to be marked as noncoherent
dmaengine: dmatest: Fix dmatest waiting less when interrupted
dt-bindings: dma: Convert fsl,elo*-dma to YAML
dt-bindings: dma: fsl-mxs-dma: Add compatible string for i.MX8 chips
dmaengine: Fix typo in comment
dmaengine: ti: k3-udma-glue: Drop skip_fdq argument from k3_udma_glue_reset_rx_chn
dmaengine: bcm2835-dma: fix warning when CONFIG_PM=n
dt-bindings: dma: fsl,edma: Add i.MX94 support
dt-bindings: dma: atmel: add microchip,sama7d65-dma
dmaengine: img-mdc: remove incorrect of_match_ptr annotation
dmaengine: idxd: Delete unnecessary NULL check
dmaengine: pxa: Enable compile test
...
|
||
|
Linus Torvalds
|
e63a165308 |
phy-for-6.15
- New Support
- Qualcomm X1P42100 PCIe Gen4x4, QCS615 qmp usbc, PCIe UNIPHY 28LP
driver, SM8750 QMP UFS PHY
- Rockchip rk3576 hdptx, rk3562 naneng-combo support
- Samsung MIPI D-/C-PHY driver, ExynosAutov920 ufs phy driver
- Updates
- Samsung USB3 Type-C lane orientation detection and configuration for
Google gs101
- Qualcomm support for dual lane PHY support for QCS8300 SoC
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAmfqQM8ACgkQfBQHDyUj
g0djEhAAru22vrbLSL5S6/PrTANCmOXwxtq2p+kuzMU8lfbCh5cC+JynvRSB0Yze
+zxKnYNqA3R8AgdHWZcuDQlvkGe0mhZckbjjr6EbawaAZPgYBwSJSmd8qRhjrYgn
SqcAKFmsjaHP/YzdmA/IL7vubJ34seMY5y4K9bll7uOnmGzJCRKrvUGKbZCtK5d7
unW6Zqr77zLWnUCqlf/ekd+IAcYvy12AEg/GvIKxlsS+1N5T3Et1gj5glCEifQxQ
8hjSSH85r4WBO/K4zrLJEmBDn4lh6eEEU1Sq3n8bznbhtc6T1m8JePdBb6TAuCeX
IhykUNjdzblzfmcEmp4WGXxzArABNAVxu8yo5XLqK6pt2+AXqFcuBWGFmyEOxEg8
7pmZ8YoRtIakXEUwPRmK77NZeZbUh5NpFQCZ810AyK/5GbIBfvf0s93FJxxU/+4Z
9j75BBjHUsPoH80d4BKT6eHLggvFrFsuf9yZ/XaSXtVAKEVKCbzgIBbPVYlINMOM
FQnSHDZaJJVesBL1MQuRsVQEHpM+6oZVuCu47tjEojvtTackfpawzP5+KPPqXdO7
vkWgQWw8WjVAHJ3yebbC6LR4ER11gWgCYCWAhMIgMJGzbNZ/M7Dm7Z4GJy+qdWqc
Hv25jZADQT1GcVk4Rq1GJJzwt365TEBH6q7+kmsY8r7Ro1Y/oro=
=0qll
-----END PGP SIGNATURE-----
Merge tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"A fairly moderate sized request for the generic phy subsystem with
some new device and driver support along with driver updates with
Samsung and Qualcomm ones being major ones.
New HW Support:
- Qualcomm X1P42100 PCIe Gen4x4, QCS615 qmp usbc, PCIe UNIPHY 28LP
driver, SM8750 QMP UFS PHY
- Rockchip rk3576 hdptx, rk3562 naneng-combo support
- Samsung MIPI D-/C-PHY driver, ExynosAutov920 ufs phy driver
Updates:
- Samsung USB3 Type-C lane orientation detection and configuration
for Google gs101
- Qualcomm support for dual lane PHY support for QCS8300 SoC"
* tag 'phy-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (47 commits)
phy: rockchip-naneng-combo: Support rk3562
dt-bindings: phy: rockchip: Add rk3562 naneng-combophy compatible
phy: rockchip: Add Samsung MIPI D-/C-PHY driver
dt-bindings: phy: Add Rockchip MIPI C-/D-PHY schema
phy: qcom: uniphy-28lp: add COMMON_CLK dependency
phy: rockchip: usbdp: Remove unnecessary bool conversion
phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init
phy: rockchip: usbdp: Only verify link rates/lanes/voltage when the corresponding set flags are set
phy: qcom-qmp-pcie: add dual lane PHY support for QCS8300
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2
phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750
dt-bindings: phy: qcom,sc8280xp-qmp-ufs-phy: document the SM8750 QMP UFS PHY
phy: qcom: Introduce PCIe UNIPHY 28LP driver
dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy
phy: qcom: qmp-usbc: Add qmp configuration for QCS615
phy: freescale: imx8m-pcie: assert phy reset and perst in power off
phy: freescale: imx8m-pcie: cleanup reset logic
phy: core: Remove unused phy_pm_runtime_(allow|forbid)
dt-bindings: phy: document Allwinner A523 USB-2.0 PHY
phy: phy-rockchip-samsung-hdptx: Add support for RK3576
...
|
||
|
Linus Torvalds
|
4d31167e84 |
soundwire updates for 6.15
- Support for SoundWire Bulk Register Access (BRA) protocol in core
along with Intel driver support and ASoC bits required.
- AMD driver updates and support for ACP 7.0 and 7.1 platforms
-----BEGIN PGP SIGNATURE-----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=fe9N
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for SoundWire Bulk Register Access (BRA) protocol in core
along with Intel driver support and ASoC bits required
- AMD driver updates and support for ACP 7.0 and 7.1 platforms
* tag 'soundwire-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (28 commits)
soundwire: take in count the bandwidth of a prepared stream
ASoC: rt711-sdca: add DP0 support
soundwire: debugfs: add interface for BPT/BRA transfers
ASoC: SOF: Intel: hda-sdw-bpt: add CHAIN_DMA support
soundwire: intel_ace2x: add BPT send_async/wait callbacks
soundwire: intel: add BPT context definition
ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA
soundwire: intel_auxdevice: add indirection for BPT send_async/wait
soundwire: cadence: add BTP/BRA helpers to format data
soundwire: bus: add bpt_stream pointer
soundwire: bus: add send_async/wait APIs for BPT protocol
soundwire: stream: reuse existing code for BPT stream
soundwire: stream: special-case the bus compute_params() routine
soundwire: stream: extend sdw_alloc_stream() to take 'type' parameter
soundwire: extend sdw_stream_type to BPT
soundwire: cadence: add BTP support for DP0
Documentation: driver: add SoundWire BRA description
soundwire: amd: change the log level for command response log
soundwire: slave: fix an OF node reference leak in soundwire slave device
soundwire: Use str_enable_disable-like helpers
...
|
||
|
Dmitry Osipenko
|
6b60c28233 |
MAINTAINERS: Add Dmitry Osipenko as drm/virtio co-maintainer
I was helping to co-maintain VirtIO-GPU driver in drm-misc with permission from Gerd Hoffmann for past 2 years and would like to receive new patches directly into my inbox. Add myself as co-maintainer. Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: https://lore.kernel.org/r/20250401130151.2238772-1-dmitry.osipenko@collabora.com |
||
Dr. David Alan Gilbert
|
d0ebf4c7eb |
x86/platform/iosf_mbi: Remove unused iosf_mbi_unregister_pmic_bus_access_notifier()
The last use of iosf_mbi_unregister_pmic_bus_access_notifier() was
removed in 2017 by:
|
||
|
Linus Torvalds
|
25601e8544 |
Char/Misc/IIO driver updates for 6.15-rc1
Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform bus
interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mNdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylktACfYJix41jCCDbiFjnu7Hz4OIdcrUsAnRyF164M
1n5MhEhsEmvQj7WBwQLE
=AmmW
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
||
|
Linus Torvalds
|
2cd5769fb0 |
Driver core updates for 6.15-rc1
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
|
||
Shakeel Butt
|
7d6c63c319 |
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
The commit |
||
|
Linus Torvalds
|
d6b02199cd |
- The 7 patch series "powerpc/crash: use generic crashkernel
reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The 2 patch series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The 4 patch series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The 12 patch series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The 16 patch series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The 7 patch series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The 2 patch series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The 4 patch series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq r6khQUIcQImPPcjFqEFpuiSOU0MBZA0= =Kii8 -----END PGP SIGNATURE----- Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - The series "powerpc/crash: use generic crashkernel reservation" from Sourabh Jain changes powerpc's kexec code to use more of the generic layers. - The series "get_maintainer: report subsystem status separately" from Vlastimil Babka makes some long-requested improvements to the get_maintainer output. - The series "ucount: Simplify refcounting with rcuref_t" from Sebastian Siewior cleans up and optimizing the refcounting in the ucount code. - The series "reboot: support runtime configuration of emergency hw_protection action" from Ahmad Fatoum improves the ability for a driver to perform an emergency system shutdown or reboot. - The series "Converge on using secs_to_jiffies() part two" from Easwar Hariharan performs further migrations from msecs_to_jiffies() to secs_to_jiffies(). - The series "lib/interval_tree: add some test cases and cleanup" from Wei Yang permits more userspace testing of kernel library code, adds some more tests and performs some cleanups. - The series "hung_task: Dump the blocking task stacktrace" from Masami Hiramatsu arranges for the hung_task detector to dump the stack of the blocking task and not just that of the blocked task. - The series "resource: Split and use DEFINE_RES*() macros" from Andy Shevchenko provides some cleanups to the resource definition macros. - Plus the usual shower of singleton patches - please see the individual changelogs for details. * tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits) mailmap: consolidate email addresses of Alexander Sverdlin fs/procfs: fix the comment above proc_pid_wchan() relay: use kasprintf() instead of fixed buffer formatting resource: replace open coded variant of DEFINE_RES() resource: replace open coded variants of DEFINE_RES_*_NAMED() resource: replace open coded variant of DEFINE_RES_NAMED_DESC() resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED() samples: add hung_task detector mutex blocking sample hung_task: show the blocker task if the task is hung on mutex kexec_core: accept unaccepted kexec segments' destination addresses watchdog/perf: optimize bytes copied and remove manual NUL-termination lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap() lib/interval_tree: skip the check before go to the right subtree lib/interval_tree: add test case for span iteration lib/interval_tree: add test case for interval_tree_iter_xxx() helpers lib/rbtree: add random seed lib/rbtree: split tests lib/rbtree: enable userland test suite for rbtree related data structure checkpatch: describe --min-conf-desc-length scripts/gdb/symbols: determine KASLR offset on s390 ... |
||
Rafael J. Wysocki
|
9e4e249018 |
cpufreq: Reference count policy in cpufreq_update_limits()
Since acpi_processor_notify() can be called before registering a cpufreq
driver or even in cases when a cpufreq driver is not registered at all,
cpufreq_update_limits() needs to check if a cpufreq driver is present
and prevent it from being unregistered.
For this purpose, make it call cpufreq_cpu_get() to obtain a cpufreq
policy pointer for the given CPU and reference count the corresponding
policy object, if present.
Fixes:
|
||
Oliver Upton
|
acfcaf90db |
smccc: kvm_guest: Align with DISCOVER_IMPL_CPUS ABI
The ABI of the hypercall requires that R2 and R3 are 0. Explicitly pass
0 for these parameters.
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Fixes:
|
||
Rob Clark
|
c2d3a73006 |
drm/syncobj: Extend EXPORT_SYNC_FILE for timeline syncobjs
Add support for exporting a dma_fence fd for a specific point on a timeline. This is needed for vtest/vpipe[1][2] to implement timeline syncobj support, as it needs a way to turn a point on a timeline back into a dma_fence fd. It also closes an odd omission from the syncobj UAPI. [1] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/33433 [2] https://gitlab.freedesktop.org/virgl/virglrenderer/-/merge_requests/805 v2: Add DRM_SYNCOBJ_HANDLE_TO_FD_FLAGS_TIMELINE v3: Add unstaged uabi header hunk v4: Also handle IMPORT_SYNC_FILE case v5: Address comments from Dmitry v6: checkpatch.pl nits Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250401155758.48855-1-robdclark@gmail.com Signed-off-by: Christian König <christian.koenig@amd.com> |
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
Henry Martin
|
93d34608fd |
ASoC: imx-card: Add NULL check in imx_card_probe()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
imx_card_probe() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes:
|
||
Maurizio Lombardi
|
288ff0d10b |
nvme-pci: skip nvme_write_sq_db on empty rqlist
nvme_submit_cmds() should check the rqlist before calling
nvme_write_sq_db(); if the list is empty, it must return immediately.
Fixes:
|
||
John Meneghini
|
32c928142c |
nvme-multipath: change the NVME_MULTIPATH config option
Fix up the NVME_MULTIPATH config description so that it accurately describes what it does. Signed-off-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
John Meneghini
|
47f8cc9e32 |
nvme: update the multipath warning in nvme_init_ns_head
The new NVME_MULTIPATH_PARAM config option requires updates to the warning message in nvme_init_ns_head(). Signed-off-by: John Meneghini <jmeneghi@redhat.com> Tested-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
Caleb Sander Mateos
|
38808af53c |
nvme/ioctl: move fixed buffer lookup to nvme_uring_cmd_io()
nvme_map_user_request() is called from both nvme_submit_user_cmd() and
nvme_uring_cmd_io(). But the ioucmd branch is only applicable to
nvme_uring_cmd_io(). Move it to nvme_uring_cmd_io() and just pass the
resulting iov_iter to nvme_map_user_request().
For NVMe passthru operations with fixed buffers, the fixed buffer lookup
happens in io_uring_cmd_import_fixed(). But nvme_uring_cmd_io() can
return -EAGAIN first from nvme_alloc_user_request() if all tags in the
tag set are in use. This ordering difference is observable when using
UBLK_U_IO_{,UN}REGISTER_IO_BUF SQEs to modify the fixed buffer table. If
the NVMe passthru operation is followed by UBLK_U_IO_UNREGISTER_IO_BUF
to unregister the fixed buffer and the NVMe passthru goes async, the
fixed buffer lookup will fail because it happens after the unregister.
Userspace should not depend on the order in which io_uring issues SQEs
submitted in parallel, but it may try submitting the SQEs together and
fall back on a slow path if the fixed buffer lookup fails. To make the
fast path more likely, do the import before nvme_alloc_user_request().
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
||
|
Caleb Sander Mateos
|
cd683de63e |
nvme/ioctl: move blk_mq_free_request() out of nvme_map_user_request()
The callers of nvme_map_user_request() (nvme_submit_user_cmd() and nvme_uring_cmd_io()) allocate the request, so have them free it if nvme_map_user_request() fails. Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Keith Busch <kbusch@kernel.org> |
||
|
Caleb Sander Mateos
|
eada75467f |
nvme/ioctl: don't warn on vectorized uring_cmd with fixed buffer
The vectorized io_uring NVMe passthru opcodes don't yet support fixed
buffers. But since userspace can trigger this condition based on the
io_uring SQE parameters, it shouldn't cause a kernel warning.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes:
|
||
Damien Le Moal
|
ea7789c154 |
nvmet: pci-epf: Keep completion queues mapped
Instead of mapping and unmapping the completion queues memory to the host PCI address space whenever nvmet_pci_epf_cq_work() is called, map a completion queue to the host PCI address space when the completion queue is created with nvmet_pci_epf_create_cq() and unmap it when the completion queue is deleted with nvmet_pci_epf_delete_cq(). This removes the completion queue mapping/unmapping from nvmet_pci_epf_cq_work() and significantly increases performance. For a single job 4K random read QD=1 workload, the IOPS is increased from 23 KIOPS to 25 KIOPS. Some significant throughput increasde for high queue depth and large IOs workloads can also be seen. Since the functions nvmet_pci_epf_map_queue() and nvmet_pci_epf_unmap_queue() are called respectively only from nvmet_pci_epf_create_cq() and nvmet_pci_epf_delete_cq(), these functions are removed and open-coded in their respective call sites. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> |