ieee80211_chanctx_conf struct is not put at the end of ath12k_link_vif.
Note ieee80211_chanctx_conf has flexible array member inside it, causing
below warning with GCC-14:
drivers/net/wireless/ath/ath12k/core.h:298:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Although there is no issue for now since the array is not getting used,
this should be fixed to avoid any potential data corruption issue in the
future.
Remove this struct from ath12k_link_vif, fetch it from ieee80211_bss_conf
instead when needed.
This change only applies to WCN7850, and should has no impact on other
chipsets.
This is an alternative to the solution proposed in [1].
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://msgid.link/Z8-Snz86Xfwdlyd7@kspp # [1]
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250321-ath12k-dont-put-chanctx-in-arvif-v1-1-c8e93061952b@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
My role has changed since I originally agreed to help with netfs, and
I'm no longer providing a lot of value here. Luckily, Paulo has agreed
to step in as co-maintainer.
Acked-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20250324-master-v1-1-e2dd2fdb15b4@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup().
Fixes: 54f00cce11 ("vmxnet3: Add XDP support.")
Signed-off-by: Sankararaman Jayaraman <sankararaman.jayaraman@broadcom.com>
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Link: https://patch.msgid.link/20250320045522.57892-1-sankararaman.jayaraman@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 14a1968074 ("net: reorganize IP MIB values") changed
MIB values to group hot fields together.
Since then 5 new fields have been added without caring about
data locality.
This patch moves IPSTATS_MIB_OUTPKTS, IPSTATS_MIB_NOECTPKTS,
IPSTATS_MIB_ECT1PKTS, IPSTATS_MIB_ECT0PKTS, IPSTATS_MIB_CEPKTS
to the hot portion of per-cpu data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250320101434.3174412-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TCP uses generic skb_set_owner_r() and sock_rfree()
for received packets, with socket lock being owned.
Switch to private versions, avoiding two atomic operations
per packet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250320121604.3342831-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
nexthop: Convert RTM_{NEW,DEL}NEXTHOP to per-netns RTNL.
Patch 1 - 5 move some validation for RTM_NEWNEXTHOP so that it can be
called without RTNL.
Patch 6 & 7 converts RTM_NEWNEXTHOP and RTM_DELNEXTHOP to per-netns RTNL.
Note that RTM_GETNEXTHOP and RTM_GETNEXTHOPBUCKET are not touched in
this series.
rtm_get_nexthop() can be easily converted to RCU, but rtm_dump_nexthop()
needs more work due to the left-to-right rbtree walk, which looks prone
to node deletion and tree rotation without a retry mechanism.
v1: https://lore.kernel.org/netdev/20250318233240.53946-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20250319230743.65267-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rtm_del_nexthop(), only nexthop_find_by_id() and remove_nexthop()
require RTNL as they touch net->nexthop.rb_root.
Let's move RTNL down as rtnl_net_lock() before nexthop_find_by_id().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we pass false to the rtnl_held param of lwtunnel_valid_encap_type(),
we can move RTNL down before rtm_to_nh_config_rtnl().
Let's use rtnl_net_lock() in rtm_new_nexthop().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of NHA_GROUP entries is guaranteed to be non-zero in
nh_check_attr_group().
Let's remove the redundant check in nexthop_create_group().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nexthop_add() checks if NLM_F_REPLACE is specified without
non-zero NHA_ID, which does not require RTNL.
Let's move the check to rtm_new_nexthop().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NHA_OIF needs to look up a device by __dev_get_by_index(),
which requires RTNL.
Let's move NHA_OIF validation to rtm_to_nh_config_rtnl().
Note that the proceeding checks made the original !cfg->nh_fdb
check redundant.
NHA_FDB is set -> NHA_OIF cannot be set
NHA_FDB is set but false -> NHA_OIF must be set
NHA_FDB is not set -> NHA_OIF must be set
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will push RTNL down to rtm_new_nexthop(), and then we
want to move non-RTNL operations out of the scope.
nh_check_attr_group() validates NHA_GROUP attributes, and
nexthop_find_by_id() and some validation requires RTNL.
Let's factorise such parts as nh_check_attr_group_rtnl()
and call it from rtm_to_nh_config_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250319230743.65267-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will split rtm_to_nh_config() into non-RTNL and RTNL parts,
and then the latter also needs tb.
As a prep, let's move nlmsg_parse() to rtm_new_nexthop().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250319230743.65267-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_rcv_core() is using:
__IP6_ADD_STATS(net, idev,
IPSTATS_MIB_NOECTPKTS +
(ipv6_get_dsfield(hdr) & INET_ECN_MASK),
max_t(unsigned short, 1, skb_shinfo(skb)->gso_segs));
This is currently evaluating both expressions twice.
Fix _DEVADD() and _DEVUPD() macros to evaluate their arguments once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250319212516.2385451-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc enhancements 2025-03-19
This series introduces multiple small misc enhancements
from the team to the mlx5 core and Eth drivers.
====================
Link: https://patch.msgid.link/1742392983-153050-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For CT action with commit argument, it's usually followed by the
forward action, either to the output netdev or next chain. The default
behavior for software is to drop by setting action attribute to
TC_ACT_SHOT instead of TC_ACT_PIPE if it's the last action. But driver
can't handle it, so block the offload for such case.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In nic mode CT setup where we do hairpin between the two
nics, both nics register to the same flow table (per zone),
and try to offload all rules on it.
Instead, filter the rules that originated from the relevant nic
(so only one side is offloaded for each nic).
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Align mlx5 driver usage of 'pfnum' with the documentation clarification
introduced in commit bb70b0d48d ("devlink: Improve the port attributes
description").
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, mlx5_is_reset_now_capable() checks whether the pci bridge is
accessible only on bridge hot plug capability check. If the pci bridge
is not accessible, reset now will fail regardless of bridge hotplug
capability. Move this check to function mlx5_is_reset_now_capable()
which, in such case, aborts the reset and does so in the request phase
instead of the reset now phase.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As queue affinity is being deprecated and will no longer be supported
in the future, Always check for the presence of the port selection
namespace. When available, leverage it to distribute traffic
across the physical ports via steering, ensuring compatibility with
future NICs.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742392983-153050-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For simplicity reasons, the driver avoids crossing work queue fragment
boundaries within the same TX WQE (Work-Queue Element). Until today, as
the number of packets in a TX MPWQE (Multi-Packet WQE) descriptor is not
known in advance, the driver pre-prepared contiguous memory for the
largest possible WQE. For this, when getting too close to the fragment
edge, having no room for the largest WQE possible, the driver was
filling the fragment remainder with NOP descriptors, aligning the next
descriptor to the beginning of the next fragment.
Generating and handling these NOPs wastes resources, like: CPU cycles,
work-queue entries fetched to the device, and PCI bandwidth.
In this patch, we replace this NOPs filling mechanism in the TX MPWQE
flow. Instead, we utilize the remaining entries of the fragment with a
TX MPWQE. If this room turns out to be too small, we simply open an
additional descriptor starting at the beginning of the next fragment.
Performance benchmark:
uperf test, single server against 3 clients.
TCP multi-stream, bidir, traffic profile "2x350B read, 1400B write".
Bottleneck is in inbound PCI bandwidth (device POV).
+---------------+------------+------------+--------+
| | Before | After | |
+---------------+------------+------------+--------+
| BW | 117.4 Gbps | 121.1 Gbps | +3.1% |
+---------------+------------+------------+--------+
| tx_packets | 15 M/sec | 15.5 M/sec | +3.3% |
+---------------+------------+------------+--------+
| tx_nops | 3 M/sec | 0 | -100% |
+---------------+------------+------------+--------+
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1742391746-118647-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set ret = 0 on successful completion of the processing loop in
cs_dsp_load() and cs_dsp_load_coeff() to ensure that the function
returns 0 on success.
All normal firmware files will have at least one data block, and
processing this block will set ret == 0, from the result of either
regmap_raw_write() or cs_dsp_parse_coeff().
The kunit tests create a dummy firmware file that contains only the
header, without any data blocks. This gives cs_dsp a file to "load"
that will not cause any side-effects. As there aren't any data blocks,
the processing loop will not set ret == 0.
Originally there was a line after the processing loop:
ret = regmap_async_complete(regmap);
which would set ret == 0 before the function returned.
Commit fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
changed the regmap write to a normal sync write, so the call to
regmap_async_complete() wasn't necessary and was removed. It was
overlooked that the ret here wasn't only to check the result of
regmap_async_complete(), it also set the final return value of the
function.
Fixes: fe08b7d508 ("firmware: cs_dsp: Remove async regmap writes")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250323170529.197205-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch drm_dp_tunnel.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-6-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Switch drm_dp_mst_topology.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-5-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Switch drm_dp_cec.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-4-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Switch drm_dp_helper.c to use new set of DPCD read / write helpers.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-3-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
drm_dp_dpcd_read_link_status() follows the "return error code or number
of bytes read" protocol, with the code returning less bytes than
requested in case of some errors. However most of the drivers
interpreted that as "return error code in case of any error". Switch
drm_dp_dpcd_read_link_status() to drm_dp_dpcd_read_data() and make it
follow that protocol too.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-2-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Existing DPCD access functions return an error code or the number of
bytes being read / write in case of partial access. However a lot of
drivers either (incorrectly) ignore partial access or mishandle error
codes. In other cases this results in a boilerplate code which compares
returned value with the size.
Implement new set of DPCD access helpers, which ignore partial access,
always return 0 or an error code.
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250324-drm-rework-dpcd-access-v4-1-e80ff89593df@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Unpriv spec states:
| The Zvknhb and Zvbc Vector Crypto Extensions --and accordingly the
| composite extensions Zvkn, Zvknc, Zvkng, and Zvksc-- require a Zve64x
| base, or application ("V") base Vector Extension. All of the other
| Vector Crypto Extensions can be built on any embedded (Zve*) or
| application ("V") base Vector Extension.
Enforce the minimum requirement via schema.
Link: https://github.com/riscv/riscv-isa-manual/blob/main/src/vector-crypto.adoc#extensions-overview
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-flask-relay-b36ee622b2c8@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Section 33.18.2. Zve*: Vector Extensions for Embedded Processors
in [1] says:
| The Zve32f and Zve64x extensions depend on the Zve32x extension. The Zve64f extension depends
| on the Zve32f and Zve64x extensions. The Zve64d extension depends on the Zve64f extension
| The Zve32x extension depends on the Zicsr extension. The Zve32f and Zve64f extensions depend
| upon the F extension
| The Zve64d extension depends upon the D extension
Apply these rules to the bindings to help prevent invalid combinations.
Link: https://github.com/riscv/riscv-isa-manual/releases/tag/riscv-isa-release-698e64a-2024-09-09 [1]
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-banking-crestless-58f3259a5018@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Per the specifications, the d extension for double-precision floating
point operations depends on the f extension for single-precision floating
point. Add that requirement to the bindings. This differs from the
Linux implementation, where single-precious only is not supported.
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-perpetual-daunting-ad489c9a857a@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Using Clement's new validation callbacks, support checking that
dependencies have been satisfied for the floating point extensions.
The check for "d" might be slightly confusingly shorter than that of "f",
despite "d" depending on "f". This is because the requirement that a
hart supporting double precision must also support single precision,
should be validated by dt-bindings etc, not the kernel but lack of
support for single precision only is a limitation of the kernel.
Tested-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250312-reptile-platinum-62ee0f444a32@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Add PMU support for per-function engine activity stats.
per-function engine activity is enabled when VF's are enabled.
If 2 VF's are enabled, then the applicable function values are
0 - PF engine activity
1 - VF1 engine activity
2 - VF2 engine activity
This can be read from perf tool as shown below
./perf stat -e xe_<bdf>/engine-active-ticks,gt=0,engine_class=0,
engine_instance=0,function=1/ -I 1000
v2: fix documentation (Umesh)
remove global for functions (Lucas, Michal)
v3: fix commit message
move function_id checks to same place (Michal)
v4: fix comment (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-3-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add support for function level engine activity stats.
Engine activity stats are enabled when VF's are enabled
v2: remove unnecessary initialization
move offset to improve code readability (Umesh)
remove global for function engine activity (Lucas)
v3: fix commit message (Michal)
v4: remove enable function parameter
fix kernel-doc (Umesh)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311071759.2117211-2-riana.tauro@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Using Clement's new validation callbacks, support checking that
dependencies have been satisfied for the vector crpyto extensions.
Currently riscv_isa_extension_available(<vector crypto>) will return
true on systems that support the extensions but vector itself has been
disabled by the kernel, adding validation callbacks will prevent such a
scenario from occuring and make the behaviour of the extension detection
functions more consistent with user expectations - it's not expected to
have to check for vector AND the specific crypto extension.
The Unpriv spec states:
| The Zvknhb and Zvbc Vector Crypto Extensions --and accordingly the
| composite extensions Zvkn, Zvknc, Zvkng, and Zvksc-- require a Zve64x
| base, or application ("V") base Vector Extension. All of the other
| Vector Crypto Extensions can be built on any embedded (Zve*) or
| application ("V") base Vector Extension.
While this could be used as the basis for checking that the correct base
for individual crypto extensions, but that's not really the kernel's job
in my opinion and it is sufficient to leave that sort of precision to
the dt-bindings. The kernel only needs to make sure that vector, in some
form, is available.
Link: https://github.com/riscv/riscv-isa-manual/blob/main/src/vector-crypto.adoc#extensions-overview
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250312-entertain-shaking-b664142c2f99@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Using Clement's new validation callbacks, support checking that
dependencies have been satisfied for the vector extensions. From the
kernel's perfective, it's not required to differentiate between the
conditions for all the various vector subsets - it's the firmware's job
to not report impossible combinations. Instead, the kernel only has to
check that the correct config options are enabled and to enforce its
requirement of the d extension being present for FPU support.
Since vector will now be disabled proactively, there's no need to clear
the bit in elf_hwcap in riscv_fill_hwcap() any longer.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250312-eclair-affluent-55b098c3602b@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Commit c54b386969 ("VFS: Change vfs_mkdir() to return the dentry.")
changed cachefiles_get_directory, replacing "subdir" with a ERR_PTR
from the result of cachefiles_inject_write_error, which is either 0
or some error code. This causes an oops when the resulting pointer
is passed to vfs_mkdir.
Use a similar pattern to what is used earlier in the function; replace
subdir with either the return value from vfs_mkdir, or the ERR_PTR
of the cachefiles_inject_write_error() return value, but only if it
is non zero.
Fixes: c54b386969 ("VFS: Change vfs_mkdir() to return the dentry.")
cc: netfs@lists.linux.dev
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/20250325125905.395372-1-marc.dionne@auristor.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
I had to spend some (a lot;) time to understand why pidfd_info_test
(and more) fails with my patch under qemu on my machine ;) Until I
applied the patch below.
I think it is a bad idea to do the things like
#ifndef __NR_clone3
#define __NR_clone3 -1
#endif
because this can hide a problem. My working laptop runs Fedora-23 which
doesn't have __NR_clone3/etc in /usr/include/. So "make" happily succeeds,
but everything fails and it is not clear why.
Link: https://lore.kernel.org/r/20250323174518.GB834@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
If a single-threaded process exits do_notify_pidfd() will be called twice,
from exit_notify() and right after that from do_notify_parent().
1. Change exit_notify() to call do_notify_pidfd() if the exiting task is
not ptraced and it is not a group leader.
2. Change do_notify_parent() to call do_notify_pidfd() unconditionally.
If tsk is not ptraced, do_notify_parent() will only be called when it
is a group-leader and thread_group_empty() is true.
This means that if tsk is ptraced, do_notify_pidfd() will be called from
do_notify_parent() even if tsk is a delay_group_leader(). But this case is
less common, and apart from the unnecessary __wake_up() is harmless.
Granted, this unnecessary __wake_up() can be avoided, but I don't want to
do it in this patch because it's just a consequence of another historical
oddity: we notify the tracer even if !thread_group_empty(), but do_wait()
from debugger can't work until all other threads exit. With or without this
patch we should either eliminate do_notify_parent() in this case, or change
do_wait(WEXITED) to untrace the ptraced delay_group_leader() at least when
ptrace_reparented().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250323171955.GA834@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
* ras/edac-cxl:
EDAC/device: Fix dev_set_name() format string
EDAC: Update memory repair control interface for memory sparing feature
EDAC: Add a memory repair control feature
EDAC: Add a Error Check Scrub control feature
EDAC: Add scrub control feature
EDAC: Add support for EDAC device features control
* ras/edac-drivers:
EDAC/ie31200: Switch Raptor Lake-S to interrupt mode
EDAC/ie31200: Add Intel Raptor Lake-S SoCs support
EDAC/ie31200: Break up ie31200_probe1()
EDAC/ie31200: Fold the two channel loops into one loop
EDAC/ie31200: Make struct dimm_data contain decoded information
EDAC/ie31200: Make the memory controller resources configurable
EDAC/ie31200: Simplify the pci_device_id table
EDAC/ie31200: Fix the 3rd parameter name of *populate_dimm_info()
EDAC/ie31200: Fix the error path order of ie31200_init()
EDAC/ie31200: Fix the DIMM size mask for several SoCs
EDAC/ie31200: Fix the size of EDAC_MC_LAYER_CHIP_SELECT layer
EDAC/{skx_common,i10nm}: Fix some missing error reports on Emerald Rapids
EDAC/igen6: Fix the flood of invalid error reports
EDAC/ie31200: work around false positive build warning
* ras/edac-misc:
MAINTAINERS: Add a secondary maintainer for bluefield_edac
EDAC/pnd2: Make read-only const array intlv static
EDAC/igen6: Constify struct res_config
EDAC/amd64: Simplify return statement in dct_ecc_enabled()
EDAC: Use string choice helper functions
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
This new test makes sure that ftrace can trace a
function that was introduced by a livepatch.
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-2-d9d7cc386c75@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
The HDMI vs. not scanline offset stuff no longer applies to the
latest platforms, so using HAS_DDI() is a bit confusing. Replace
with a more specific set of conditions.
Also let's just deal with the platform types in the if ladder
itself, and handle the HDMI vs. not within the specific branch
for those platforms.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207215406.19348-4-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Add new ftrace helpers functions cleanup_tracing, trace_function and
check_traced_functions.
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-1-d9d7cc386c75@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Executing dql_reset after setting a non-zero value for limit_min can
lead to an unreasonable situation where dql->limit is less than
dql->limit_min.
For instance, after setting
/sys/class/net/eth*/queues/tx-0/byte_queue_limits/limit_min,
an ifconfig down/up operation might cause the ethernet driver to call
netdev_tx_reset_queue, which in turn invokes dql_reset.
In this case, dql->limit is reset to 0 while dql->limit_min remains
non-zero value, which is unexpected. The limit should always be
greater than or equal to limit_min.
Signed-off-by: Jing Su <jingsusu@didiglobal.com>
Link: https://patch.msgid.link/Z9qHD1s/NEuQBdgH@pilot-ThinkCentre-M930t-N000
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This extends the VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT ioctls to attach/detach
a given pasid of a vfio device to/from an IOAS/HWPT.
Link: https://patch.msgid.link/r/20250321180143.8468-4-yi.l.liu@intel.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This adds pasid_at|de]tach_ioas ops for attaching hwpt to pasid of a
device and the helpers for it. For now, only vfio-pci supports pasid
attach/detach.
Link: https://patch.msgid.link/r/20250321180143.8468-3-yi.l.liu@intel.com
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
