Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures".
DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their
damon_ctx object allocations fail. The bugs are expected to happen
infrequently because the allocations are arguably too small to fail on
common setups. But theoretically they are possible and the consequences
are bad. Fix those.
The issues were discovered [1] by Sashiko.
This patch (of 2):
DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init
function. damon_reclaim_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL.
Link: https://lore.kernel.org/20260529000104.7006-2-sj@kernel.org
Link: https://lore.kernel.org/20260419014800.877-1-sj@kernel.org [1]
Fixes: 3f7a914ab9 ("mm/damon/reclaim: use damon_initialized()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b942
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed.
Link: https://lore.kernel.org/20260528-zram-v3-1-cab86eef8764@gmail.com
Fixes: 8e654f8fbf ("zram: read page from backing device")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Cunlong Li <shenxiaogll@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I will switch to use @linux.dev mailbox, update all entries in
MAINTAINERS. And map the address in .mailmap.
Link: https://lore.kernel.org/20260528131454.1996752-1-baoquan.he@linux.dev
Signed-off-by: Baoquan He <baoquan.he@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 9b93f7e327 ("tools/getdelays: use the static UAPI headers
from tools/include/uapi"), the Makefile was changed to use
-I../include/uapi/ instead of -I../../usr/include to ensure tools always
use the up-to-date UAPI headers.
However, only linux/taskstats.h was added to tools/include/uapi/ in commit
e5bbb35a07 ("tools headers UAPI: sync linux/taskstats.h"), but
linux/acct.h was missing.
This causes procacct.c to fail to compile with:
procacct.c:234:37: error: 'AGROUP' undeclared (first use in this function)
gcc -I../include/uapi/ getdelays.c -o getdelays
gcc -I../include/uapi/ procacct.c -o procacct
procacct.c: In function `print_procacct':
procacct.c:234:37: error: `AGROUP' undeclared (first use in this function)
did you mean `NOGROUP'?
234 | , t->version >= 12 ? (t->ac_flag & AGROUP ? 'P' : 'T') : '?'
| ^~~~~~
| NOGROUP
procacct.c:234:37: note: each undeclared ident
because procacct.c uses the AGROUP macro defined in linux/acct.h.
Add the missing linux/acct.h to complete the static UAPI header set.
Link: https://lore.kernel.org/20260527213558929EhiHHy9EDTMjmg3uuDOMi@zte.com.cn
Fixes: 9b93f7e327 ("tools/getdelays: use the static UAPI headers from tools/include/uapi")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cma_activate_area() can fail after a CMA area has already been added to
cma_areas[]. In that case the area is left in the global array, but it
does not reach the point where CMA_ACTIVATED is set.
cma_sysfs_init() currently walks all cma_area_count entries and creates
sysfs files for every area, including ones that failed activation. These
areas are not usable CMA areas and should not be exposed to userspace as
valid CMA regions.
If such an inactive area is exposed, userspace sees a CMA directory whose
read-only accounting files report zeros. total_pages and available_pages
report zero because the failed activation path clears cma->count and
cma->available_count, while the allocation and release counters also stay
at zero because the area cannot service CMA allocations. This makes the
failed area look like a valid but empty CMA region and can mislead tests,
monitoring, and diagnostics.
Skip CMA areas that did not reach CMA_ACTIVATED when creating the sysfs
objects. Since inactive entries can now be skipped, make the error unwind
tolerate entries that never had cma_kobj initialized.
Link: https://lore.kernel.org/20260524140420.61864-1-kaitao.cheng@linux.dev
Link: https://lore.kernel.org/20260522131434.78532-1-kaitao.cheng@linux.dev
Fixes: 43ca106fa8 ("mm: cma: support sysfs")
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reported-by: David Hildenbrand (Arm) <david@kernel.org>
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Closes: https://lore.kernel.org/linux-mm/55481a8b-dcfc-4bef-ba59-aa0b43dca88b@kernel.org/
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but that
does not serialize all fields tested by shm_may_destroy(). In particular,
shm_nattch is updated while holding shm_perm.lock, and attach paths can do
that without holding the rwsem.
Do not decide that an orphaned segment is unused before taking the object
lock. Move the shm_may_destroy() check under shm_perm.lock, matching the
other destroy paths, and unlock the segment when it no longer qualifies
for removal.
Link: https://lore.kernel.org/9d97cc1031de2d0bace0edf3a668818aa2f4eca6.1777410234.git.zylzyl2333@gmail.com
Fixes: 4c677e2eef ("shm: optimize locking and ipc_namespace getting")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yilin Zhu <zylzyl2333@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Serge Hallyn <sergeh@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bpf_prog_query() returns a negative errno on failure.
query_flow_dissector() currently closes the namespace fd and then reads
errno to decide whether -EINVAL means that the running kernel does not
support flow dissector queries.
That errno check controls behavior, not just diagnostics: -EINVAL is
handled as a non-fatal old-kernel case, while any other error makes bpftool
net fail.
The namespace fd is opened read-only, so close() is not expected to
commonly fail in normal use. Still, the BPF_PROG_QUERY error is already
available in err, and reading errno after an intervening close() is
fragile. If close() does change errno, the compatibility branch may be
based on close()'s error instead of the BPF_PROG_QUERY result.
This was reproduced with an LD_PRELOAD fault injector that forced
BPF_PROG_QUERY for BPF_FLOW_DISSECTOR to fail with EINVAL and then
forced close() on the netns fd to fail with EIO. The unpatched bpftool
reported "can't query prog: Input/output error". With this change, the
same injected failure is handled as the intended non-fatal EINVAL
compatibility case.
Use the libbpf-returned error code instead. Keep the existing errno reset
in the non-fatal path to preserve batch mode behavior. The success path
is unchanged.
Fixes: 7f0c57fec8 ("bpftool: show flow_dissector attachment status")
Signed-off-by: Woojin Ji <random6.xyz@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20260603003339.33791-1-random6.xyz@gmail.com
Assisted-by: ChatGPT:gpt-5.5
Add the possibility to disable the auto adjustment for input current
limitation via sysfs because it gives strange results under certain
circumstances e.g. when powering the device with solar panels
resulting in no input power usage at all.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20260504164017.467679-1-andreas@kemnade.info
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This file uses dev_fwnode() without including the proper header for it,
relying on transitive header inclusion from:
drivers/power/supply/cpcap-charger.c
- include/linux/phy/omap_usb.h
- include/linux/usb/phy_companion.h
- include/linux/usb/otg.h
- include/linux/phy/phy.h
- drivers/phy/phy-provider.h
- include/linux/of.h
- include/linux/property.h
With the future removal of drivers/phy/phy-provider.h from
include/linux/phy/phy.h, this transitive inclusion would break.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260505100523.1922388-27-vladimir.oltean@nxp.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260505102752.182089-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace and commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # max77976_charger.c
Link: https://patch.msgid.link/20260515101629.4132270-2-u.kleine-koenig@baylibre.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The last user was removed in commit aea12071d6
("power/supply: Drop obsolete JZ4740 driver") and replaced by
a self-contained IIO-based driver. No file includes this header.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://patch.msgid.link/20260515185043.1523363-1-costa.shul@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Use of_device_get_match_data() to fetch the reset syscfg data directly
instead of open-coding an of_match_device() lookup.
This also lets the driver drop the of_device.h include.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260519004144.626969-1-rosenp@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver currently reports the 'charging' and 'overvoltage' states based
on a logical expression in the get_charger_property() wrapper function.
This doesn't scale well to other chip variants, which may have a different
number and type of hardware reported conditions which fall into these
broad power supply states.
Move the logic for determining 'charging' and 'overvoltage' states into
chip-specific accessors, which can be overridden by each variant as
needed.
This helps keep the get_charger_property() wrapper function chip-agnostic
while allowing for new chip variants to be added bringing their own logic.
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260603-bq25792-v7-5-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Move the remaining get/set helper functions to indirect calls via the
per-chip bq257xx_chip_info struct.
This improves the consistency of the code and prepares the driver to
support multiple chip variants with different register layouts and bit
definitions.
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260603-bq25792-v7-4-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a field for the default current limit to the bq257xx_info structure and
use it instead of the hardcoded value in the probe function.
This prepares the driver for allowing different electrical constraints for
different chip variants.
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260603-bq25792-v7-3-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The minimal system voltage (VSYSMIN) is meant to protect the battery from
dangerous over-discharge. When the device tree provides a value for the
minimum design voltage of the battery, the user should not be allowed to
set a lower VSYSMIN, as that would defeat the purpose of this protection.
Flip the clamping logic when setting VSYSMIN to ensure that battery design
voltage is respected.
Cc: stable@vger.kernel.org
Fixes: 1cc017b7f9 ("power: supply: bq257xx: Add support for BQ257XX charger")
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260603-bq25792-v7-2-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Changes for v7.2
Core:
- Fixed documentation for msm_gem_shrinker functions
- IFPC related enablement/fixes for gen8
- PERFCNTR_CONFIG ioctl support
GPU
- Reworked handling of UBWC configuration
- a810 suppport
MDSS:
- Added Milos platform support
- Reworked handling of UBWC configuration
DisplayPort:
- Reworked HPD handling, preparing for the MST support
DPU:
- Added Milos platform support
- Reworked handling of UBWC configuration
DSI:
- Added Milos platform support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00DXZcvFH2-C3fouve5DGs0DGa-vvsJPuaRmUZZVNKOfg@mail.gmail.com
The main function of the redirect interrupt controller is to manage
the redirected-interrupt table, which consists of many redirected entries.
When MSI interrupts are requested, the driver creates a corresponding
redirected entry that describes the target CPU/vector number and the
operating mode of the interrupt. The redirected interrupt module has an
independent cache, and during the interrupt routing process, it will
prioritize the redirected entries that hit the cache. The irqchip driver
can invalidate certain entry caches via a command queue.
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-5-zhangtianyang@loongson.cn
Interrupt redirection support requires a new redirect domain, which will
appear as a child domain of avecintc domain. For each interrupt source,
avecintc domain only provides the CPU/interrupt vectors, while redirect
domain provides other operations to synchronize the interrupt affinity
information among multiple cores.
When modifying the affinity of an interrupt associated with the redirect
domain, if the avecintc domain detects that the actual interrupt affinity
hasn't been changed, then the redirect domain doesn't need to perform any
operations.
To achieve the above purpose, in avecintc_set_affinity() when the current
affinity remains valid, then return value is set to IRQ_SET_MASK_OK_DONE.
This doesn't introduce any compatibility issues, even if the new return
value causing msi_domain_set_affinity() to no longer perform the call to
irq_chip_write_msi_msg():
1) When both avecintc and redirect exist in the system, the msg_address
and msg_data no longer change after the allocation phase, so it does
not actually require updating the MSI message info.
2) When only avecintc exists in the system, the irq_domain_activate_irq()
interface will be responsible for the initial configuration of the MSI
message info, which is unconditional. After that, if unnecessary,
there is no modification to the MSI message info.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-4-zhangtianyang@loongson.cn
Interrupt redirection support requires a new interrupt chip, which needs
to share data structures, constants and functions with the AVECINTC code.
So move them to the header file and make the required functions public.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-3-zhangtianyang@loongson.cn
Introduce a new advanced extended interrupt model with redirect interrupt
controllers. When the redirect interrupt controller is enabled, the routing
target of MSI interrupts is no longer a specific CPU and vector number, but
a specific redirect entry. The actual CPU and vector number used are
described by the redirect entry.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-2-zhangtianyang@loongson.cn
Use the simpler min() macro since both values are unsigned and
compatible.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936 ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().
Fixes: 3bfdc63936 ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Reported-by: syzbot+78147abe6c524f183ee9@syzkaller.appspotmail.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/69f114ac.050a0220.ac8b.0003.GAE@google.com/
Link: https://patch.msgid.link/20260507112913.1019537-1-dave@stgolabs.net
Currently Nova code uses `&'a Bar0` a lot. This is `&'a Mmio`, where `Mmio`
represents an owned MMIO region; this type only exists as a target for
`Deref` so `Bar` and `IoMem` can share code and should be avoided to be
named directly. The upcoming I/O projection series would make `Io` trait
much simpler to implement, and thus the owned MMIO type would be removed
in favour of direct `Io` implementation on `Bar` and `IoMem`.
Add lifetime parameter to `Bar0<'a>` and change it to be alias of `&'a
pci::Bar<'a, ..>`. This also prepares Nova core so that when I/O projection
series land, this could be changed to using a MMIO view type directly which
avoids double indirection.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260602170416.2268531-1-gary@kernel.org
[ Rebase onto latest drm-rust-next (Blackwell enablement). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
kvm_walk_nested_s2() returns -EAGAIN as an indication that an underlying
descriptor update fails due to a race. The expectation is that the
caller restart translation, yet walk_s1() actually synthesizes an abort.
Propagate the -EAGAIN return out of walk_s1(), relying on callers to
restart the translation fetch.
Fixes: e4c7dfac2f ("KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602235450.103057-6-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
__kvm_at_s*() are expected to return -EAGAIN if the page table walk
raced with a concurrent update to a page table descriptor, which is
interpreted as a signal to restart the trapping instruction.
While this mostly works, __kvm_at_s12() silently eats the return from
__kvm_at_s1e01() and consumes an uninitialized PAR value. Propagate the
nonzero return instead.
Fixes: 92c6443222 ("KVM: arm64: Propagate PTW errors up to AT emulation")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602235450.103057-5-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Similar to the handling of descriptor reads, inject an SEA during TTW
when the descriptor access fails for reasons other than a race, such as
a read-only memslot or a bad HVA.
Fixes: bff8aa213d ("KVM: arm64: Implement HW access flag management in stage-1 SW PTW")
Fixes: e4c7dfac2f ("KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602235450.103057-4-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
kvm_translate_vncr() first invalidates the pseudo-TLB entry and
corresponding fixmap in anticipation of installing a new translation.
While the fixmap invalidation does clear the mapping from host stage-1,
it does not clear the L1_VNCR_MAPPED flag. Depending on the state of the
VNCR TLB at vcpu_put(), this could potentially precipitate a BUG_ON() if
vt->cpu is reset.
Share a helper with kvm_vcpu_put_hw_mmu(), ensuring that KVM's view of
the VNCR fixmap is in sync with the state of the VNCR TLB. Give it a
slightly verbose name to make it obvious that it is meant to be used
local to a CPU, unlike other VNCR TLB maintenance.
Fixes: 069a05e535 ("KVM: arm64: nv: Handle VNCR_EL2-triggered faults")
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602235450.103057-3-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In the case that kvm_translate_vncr() races with an MMU notifier the
early return does not release a reference on the faulted in PFN. Add
the necessary call to kvm_release_faultin_page() for the unused PFN.
Cc: stable@vger.kernel.org
Fixes: 069a05e535 ("KVM: arm64: nv: Handle VNCR_EL2-triggered faults")
Reported-by: Sashiko (local):gemini-3.1-pro
Signed-off-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602235450.103057-2-oupton@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM needs to know if the HW implements FEAT_ATS1A in order to correctly
sanitise HFGITR_EL2.ATS1E1A, which otherwise defaults to RES0 and
AT S1E1A traps are handled as UNDEF.
Solves this by exposing ID_AA64ISAR2_EL1.ATS1A to the rest of the kernel.
Fixes: ff987ffc0c ("KVM: arm64: nv: Add support for FEAT_ATS1A")
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602155430.2088142-4-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Despite having handling code for AT S1E1A, the instruction was
never plugged into the system instruction table, leading to an
exception being injected in the guest.
If the guest is Linux and using the __kvm_at() helper, the exception
is actually handled in the helper, and KVM continues more or less
silently by reentering the guest. Not exactly what you'd expect.
Fix this by plugging the emulation code where required.
Fixes: ff987ffc0c ("KVM: arm64: nv: Add support for FEAT_ATS1A")
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602155430.2088142-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We propagate CPTR_EL2.E0POE from a L1 into the L0 configuration, but
we key this on the L1 guest supporting FEAT_S2POE. This is obviously
wrong, as this bit is solely concerned with Stage-1 translation.
Fix this by making the update depend on FEAT_S1POE.
Fixes: cd931bd609 ("KVM: arm64: nv: Add additional trap setup for CPTR_EL2")
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20260602155430.2088142-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
In cpcap_battery_detect_battery_type(), the reference to an nvmem
device obtained via nvmem_device_find() is not released with
nvmem_device_put() on the success or read-failure paths, causing a
permanent reference leak. The driver’s retry logic on subsequent
battery property reads can compound this leak, preventing the nvmem
device from ever being freed.
Found by code review.
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Fixes: fd46821e85 ("power: supply: cpcap-battery: Add battery type auto detection for mapphone devices")
Link: https://patch.msgid.link/20260424011013.879639-1-make24@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: 0cd4f1f77a ("power: supply: max17042: add platform driver variant")
Cc: stable@vger.kernel.org # 6.14
Cc: Dzmitry Sankouski <dsankouski@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260407123338.2677375-1-johan@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Move of_node_put(dn) after the of_match_node() call, which still needs
the node pointer. The node reference is correctly released after use.
Fixes: e2f471efe1 ("power: reset: linkstation-poweroff: prepare for new devices")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260407073025.271865-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Unlike other models, max17055 doesn't require cell characterization data
and operates on a smaller set of input variables (`DesignCap`, `VEmpty`,
`IChgTerm`, and `ModelCfg`). Those values can be filled in through
`max17042_override_por_values()`, but the refresh bit has to be set
afterward in order to make them apply.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Vincent Cloutier <vincent@cloutier.co>
Link: https://patch.msgid.link/20260406205759.493288-8-vincent.cloutier@icloud.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Switch from an idle boolean to a helper symbol__is_idle function. In
the function lazily compute whether a symbol is an idle function
taking into consideration the kernel version and architecture of the
machine. As symbols__insert no longer needs to know if a symbol is for
the kernel, remove the argument.
To protect against drop-filtering of legitimate setup, online, or hotplug
management functions (such as intel_idle_init), x86 matches are strictly
constrained to exact known run-loops (intel_idle, intel_idle_irq,
mwait_idle, mwait_idle_with_hints).
If the target environment OS release is unresolvable (such as on guest
traces), default to treating psw_idle as idle to prevent false
negatives and match legacy trace behavior safely.
This change is inspired by mailing list discussion, particularly from
Thomas Richter <tmricht@linux.ibm.com> and Heiko Carstens
<hca@linux.ibm.com>:
https://lore.kernel.org/lkml/20260219113850.354271-1-tmricht@linux.ibm.com/
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A problem with putting bitfields into struct symbol is that other bits in
the symbol could be updated concurrently and only one update to the
underlying storage unit happen, leading to lost updates.
To avoid this, use atomics to atomically read or set part of 16-bits
of flags in the symbol. Add accessors to simplify this.
The idle value has 3 values in preparation for a later change that
will lazily update it.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In live mode the os_release isn't being initialized, make a lazy
initialization helper that assumes when the os_release isn't
initialized this is live mode.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a mutex to 'struct perf_env' to safely protect lazy
metadata setup, such as os_release or e_machine resolution,
preventing concurrent initialization data races and memory leaks
during multi-threaded profiling or symbol loading.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The switch to using e_machine has made the perf_env__raw_arch function
unused so remove it.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous approach maps an architecture string to a function
pointer to a function that takes an int errno value and returns a
string. The new approach takes an e_machine and an errno value and
returns a string.
As the only call site is in builtin-trace.c, the e_machine is already
present and potentially more specific than the perf_env arch string
that is a single global value.
Since the errno-to-name mapping is now generated statically and no
longer depends on libtraceevent, we can remove the HAVE_LIBTRACEEVENT
guards entirely, making perf_env__arch_strerrno unconditionally
available.
The major complication in this approach is having the shell script
that generates the C code map a linux directory name to the matching
ELF machine constants. To ensure compatibility with older hosts that
have older glibc versions, output fallback definitions for newer ELF
machine constants (EM_AARCH64, EM_CSKY, EM_LOONGARCH) if they are not
defined in the system <elf.h>.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the e_machine rather than arch string matching for powerpc.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new DVM node events added in CMN-700 also apply to CMN S3; fix
the model encoding so that we can expose the aliases and handle
occupancy filtering on newer CMNs too.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Use the e_machine rather than arch string matching for AARCH64.
Add include of dwarf-regs.h in case the EM_AARCH64 isn't defined, sort
the headers given this include.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from arch to e_machine in print_pmu_caps.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the e_machine rather than arch string matching.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the e_machine rather than the arch to determine x86 or PPC types.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Honglei Wang <jameshongleiwang@126.com>
Cc: Jan Polensky <japo@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>