Fix ext2_dio_write_iter() to propagate the error returned by
generic_write_sync() instead of silently discarding it, which could
cause write(2) to return success to userspace on O_SYNC/O_DSYNC files
even when the sync failed.
The correct pattern, already used in ext2_dax_write_iter() in the same
file and in ext4, xfs, f2fs among others, is:
if (ret > 0)
ret = generic_write_sync(iocb, ret);
Found by Linux Verification Center (linuxtesting.org) with SVACE.
[JK: Reflect also filemap_write_and_wait() return value]
Fixes: fb5de4358e ("ext2: Move direct-io to use iomap")
Signed-off-by: Danila Chernetsov <listdansp@mail.ru>
Link: https://patch.msgid.link/20260530122311.136803-1-listdansp@mail.ru
Signed-off-by: Jan Kara <jack@suse.cz>
Introduce the Qualcomm IPQ9650 router/gateway platform and the RDP488
board. Add support for the Motorola Edge 30 and the Nothing Phone.
Describe the IPA block on the Agatti platform and missing OPP-levels for
the video encoder/decoder.
For Eliza, describe the QUP Serial Engines, GPI DMA, SDHCI, LLCC, IMEM,
QCE crypto, ADSP remoteproc and USB nodes. Enable DSI panel,
DisplayPort, USB, and ADSP support on the Eliza MTP.
On Glymur enable ADSP and CDSP remoteprocs, FastRPC, crypto hardware,
CPUfreq cooling devices, and coresight nodes. Enable the remoteprocs and
the LID sensor on the Glymur CRD.
Describe the CAN-FD controller found on the Hamoa EVK. Correct the
DisplayPort controller OPP tables.
Describe the watchdog on IPQ5210 and IPQ9650.
Describe USB controller and PHYs for the Kaanapali platform and enable
basic USB support on the MTP and QRD devices.
Enable the second display subsystem on Lemans and use this to enable
additional DisplayPort outputs on the Lemans Ride board, and IFP
mezzanine for the EVK. Also enable the GPIO expander on the Lemans EVK
to get the CAN signals out.
Add crypto hardware and qfprom nodes on Milos. Reduce the remotefs
shared memory size to avoid sanity checks in the modem firmware
rejecting the region.
Enable the vibrator on FairPhone FP6.
Add GPSDP FastRPC support on Monaco, and describe the Bluetooth
controller on the Arduino VENTUNO Q board.
Introduce an EL2 overlay for the Purwa IoT EVK.
Enable CAN bus controller on QCS6490 RB3gen2 and add a remotefs node.
Enable FastRPC on the SC8280XP ADSP.
Correct SDM630 and SDM660 ADSP FastRPC channel ids. Also add the ADSP
memory region on SDM630.
On SDM845 devices, enable NFC on Google Pixel 3, OnePlus 6, OnePlus 6T,
and SHIFT SHIFT6mq. Enable camera flash on LG devices. Rework the
framebuffer description on Samsung, SHIFT and Xiaomi devices. Enable
camera flash on LG devices. Fix Bluetooth and WiFi on LG and Xiaomi
devices.
Enable MDSS and the display panel on Xiaomi Mi A3.
Scale L3 and DDR clock votes based on CPUfreq selection.
Enable camera clock controller, cpufreq cooling devices, and correct the
DSI1 reference clock on SM8750.
On the Talos platform, describe the QSPI support, GPR and audio
services, and enable sound on the EVK target. Enable QSPI and describe
the SPINOR on this bus, on the QCS615 Ride.
Describe power-domain and iface clock for the Inline Crypto Engine (ICE)
across various platforms.
Fix the Bluetooth RFA supply name across a variety of devices.
-----BEGIN PGP SIGNATURE-----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=+ctB
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v7.2
Introduce the Qualcomm IPQ9650 router/gateway platform and the RDP488
board. Add support for the Motorola Edge 30 and the Nothing Phone.
Describe the IPA block on the Agatti platform and missing OPP-levels for
the video encoder/decoder.
For Eliza, describe the QUP Serial Engines, GPI DMA, SDHCI, LLCC, IMEM,
QCE crypto, ADSP remoteproc and USB nodes. Enable DSI panel,
DisplayPort, USB, and ADSP support on the Eliza MTP.
On Glymur enable ADSP and CDSP remoteprocs, FastRPC, crypto hardware,
CPUfreq cooling devices, and coresight nodes. Enable the remoteprocs and
the LID sensor on the Glymur CRD.
Describe the CAN-FD controller found on the Hamoa EVK. Correct the
DisplayPort controller OPP tables.
Describe the watchdog on IPQ5210 and IPQ9650.
Describe USB controller and PHYs for the Kaanapali platform and enable
basic USB support on the MTP and QRD devices.
Enable the second display subsystem on Lemans and use this to enable
additional DisplayPort outputs on the Lemans Ride board, and IFP
mezzanine for the EVK. Also enable the GPIO expander on the Lemans EVK
to get the CAN signals out.
Add crypto hardware and qfprom nodes on Milos. Reduce the remotefs
shared memory size to avoid sanity checks in the modem firmware
rejecting the region.
Enable the vibrator on FairPhone FP6.
Add GPSDP FastRPC support on Monaco, and describe the Bluetooth
controller on the Arduino VENTUNO Q board.
Introduce an EL2 overlay for the Purwa IoT EVK.
Enable CAN bus controller on QCS6490 RB3gen2 and add a remotefs node.
Enable FastRPC on the SC8280XP ADSP.
Correct SDM630 and SDM660 ADSP FastRPC channel ids. Also add the ADSP
memory region on SDM630.
On SDM845 devices, enable NFC on Google Pixel 3, OnePlus 6, OnePlus 6T,
and SHIFT SHIFT6mq. Enable camera flash on LG devices. Rework the
framebuffer description on Samsung, SHIFT and Xiaomi devices. Enable
camera flash on LG devices. Fix Bluetooth and WiFi on LG and Xiaomi
devices.
Enable MDSS and the display panel on Xiaomi Mi A3.
Scale L3 and DDR clock votes based on CPUfreq selection.
Enable camera clock controller, cpufreq cooling devices, and correct the
DSI1 reference clock on SM8750.
On the Talos platform, describe the QSPI support, GPR and audio
services, and enable sound on the EVK target. Enable QSPI and describe
the SPINOR on this bus, on the QCS615 Ride.
Describe power-domain and iface clock for the Inline Crypto Engine (ICE)
across various platforms.
Fix the Bluetooth RFA supply name across a variety of devices.
* tag 'qcom-arm64-for-7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (131 commits)
arm64: dts: qcom: add support for pixel 3a xl with the tianma panel
arm64: dts: qcom: sdm670-google: add common device tree include
arm64: dts: qcom: hamoa-iot-evk: add MCP2518FD CAN on spi18
arm64: dts: qcom: sm8750: allow mode-switch events to reach the QMP Combo PHY
arm64: dts: qcom: sc8280xp: drop unused polling-delay-passive properties
arm64: dts: qcom: ipq5210: add watchdog node
arm64: dts: qcom: sdm845-xiaomi-beryllium: Correct IPA FW path
arm64: dts: qcom: monaco-arduino-monza: Add Bluetooth UART node
arm64: dts: qcom: glymur: Add qfprom efuse node
arm64: dts: qcom: milos: Add qfprom efuse node
arm64: dts: qcom: glymur: add coresight nodes
arm64: dts: qcom: qcs6490-rb3gen2: add rmtfs node
arm64: dts: qcom: lemans-evk: Enable CAN RX via I2C GPIO expander
arm64: dts: qcom: glymur: Fix wrong interrupt number for i2c19
arm64: dts: qcom: Drop unused remoteproc_adsp_glink label
arm64: dts: qcom: lemans: Add eDP ref clock for eDP PHYs
arm64: dts: qcom: sm8750: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8650: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8550: Add power-domain and iface clk for ice node
arm64: dts: qcom: sm8450: Add power-domain and iface clk for ice node
...
Signed-off-by: Linus Walleij <linusw@kernel.org>
We have observed multiple full invalidations occurring during device
detach when we are done using the vfio-device.
blocked_domain_attach_device()
-> detach_device()
-> amd_iommu_domain_flush_all()
-> amd_iommu_domain_flush_pages(..., CMD_INV_IOMMU_ALL_PAGES_ADDRESS)
while (size != 0) {
-> __domain_flush_pages( flush_size /* power of 2 flush_size */)
-> domain_flush_pages_v1()
-> build_inv_iommu_pages()
-> build_inv_address()
}
build_inv_address() will trigger a full invalidation if the chunk
size > (1 << 51). Consequently, the guest will issue multiple full
invalidations for a single call to amd_iommu_domain_flush_all()
Without this patch, we will see 10 time instead of 1 time full
invalidations for every amd_iommu_domain_flush_all().
Cc: stable@vger.kernel.org
Fixes: a270be1b3f ("iommu/amd: Use only natural aligned flushes in a VM")
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Weinan Liu <wnliu@google.com>
Reviewed-by: Wei Wang <wei.w.wang@hotmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Disable the Bit 31 of the AUTO_GATING iommu register, as it causes
hangups with the RGA3 (Raster Graphics Acceleration 3) peripheral.
The RGA3 register description of the TRM already states that the bit
must be set to 1. The vendor kernel sets the bit unconditionally to
1 to fix VOP (Video Output Processor) screen black issues. This patch
squashes the 2 vendor kernel commits with the following commit messages:
Master fetch data and cpu update page table may work in parallel, may
have the following procedure:
master cpu
fetch dte update page tabl
| |
(make dte invalid) <- zap iotlb entry
| |
fetch dte again
(make dte invalid) <- zap iotlb entry
| |
fetch dte again
(make dte invalid) <- zap iotlb entry
| |
fetch dte again
(make iommu block) <- zap iotlb entry
New iommu version has the above bug, if fetch dte consecutively four
times, then it will be blocked. Fortunately, we can set bit 31 of
register MMU_AUTO_GATING to 1 to make it work as old version which does
not have this issue.
This issue only appears on RV1126 so far, so make a workaround dedicated
to "rockchip,rv1126" machine type.
iommu/rockchip: fix vop blocked and screen black on RK356X and RK3588
RK3568 and RK3588 has the same issue as RV1126/RV1109 that caused by
dte fetch time limit, So we can set BIT(31) of register 0x24 default
to 1 as a workaround.
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Sven Püschel <s.pueschel@pengutronix.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The batteries list (hdev->batteries) is not cleaned up during
hidinput_disconnect(), but struct hid_battery entries are allocated
with devm_kzalloc.
When a driver is unbound (e.g. during devicereprobe), devm frees those
entries while their list_head nodesremain dangling in hdev->batteries,
which persists across rebinds.
Link: https://lore.kernel.org/all/20260602011949.2825852-1-rafael@rcpassos.me/
Fixes: 4a58ae85c3 ("HID: input: Add support for multiple batteries per device")
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Acked-by: Lucas Zampieri <lcasmz54@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
5d3869a41f ("NFS: fix writeback in presence of errors") introduced
a dereference of hdr->req->wb_lock_context in nfs_write_completion's
per-request loop. hdr->req is set once at nfs_pgheader_init() time
and is not refcount-protected for the lifetime of the loop; when hdr
aggregates requests from multiple page groups (common under heavy
NFSv3 writeback), a parallel COMMIT on hdr->req's group can drop the
last reference and free it while the outer loop is still iterating
requests from other groups. KASAN catches this as an 8-byte read at
offset +24 of a freed nfs_page slab object (wb_lock_context).
All requests in a given pgio share the same open_context, so reading
the loop-local req's wb_lock_context yields the same value and is
safe -- req is still on hdr->pages and holds its writeback kref
through the commit branch.
Caught with kasan:
BUG: KASAN: slab-use-after-free in nfs_write_completion+0x8f8/0xa50 [nfs]
Read of size 8 at addr ffff888118af2058 by task kworker/u16:16/122062
CPU: 2 UID: 0 PID: 122062 Comm: kworker/u16:16 Kdump: loaded Not tainted 7.1.0-rc4+ #ge05a759574b2 PREEMPT
Workqueue: nfsiod rpc_async_release
Call Trace:
<TASK>
dump_stack_lvl+0xaf/0x100
? nfs_write_completion+0x8f8/0xa50 [nfs]
print_report+0x157/0x4a1
? __virt_addr_valid+0x1fb/0x400
? nfs_write_completion+0x8f8/0xa50 [nfs]
kasan_report+0xc2/0x190
? nfs_write_completion+0x8f8/0xa50 [nfs]
nfs_write_completion+0x8f8/0xa50 [nfs]
? nfs_commit_release_pages+0xbd0/0xbd0 [nfs]
? lock_acquire+0x182/0x2e0
? process_one_work+0x937/0x1890
? nfs_pgio_header_alloc+0xd0/0xd0 [nfs]
rpc_free_task+0xee/0x160
rpc_async_release+0x5d/0xb0
process_one_work+0x9b0/0x1890
? pwq_dec_nr_in_flight+0xed0/0xed0
? rpc_final_put_task+0x140/0x140
worker_thread+0x75a/0x10a0
? process_one_work+0x1890/0x1890
? kthread+0x1af/0x4d0
? process_one_work+0x1890/0x1890
kthread+0x3d3/0x4d0
? kthread_affine_node+0x2c0/0x2c0
ret_from_fork+0x669/0xa50
? native_tss_update_io_bitmap+0x660/0x660
? __switch_to+0x9dd/0x1310
? kthread_affine_node+0x2c0/0x2c0
ret_from_fork_asm+0x11/0x20
</TASK>
Allocated by task 121997 on cpu 3 at 31643.290294s:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x13/0x60
__kasan_slab_alloc+0x62/0x70
kmem_cache_alloc_noprof+0x1ab/0x4e0
nfs_page_create+0x152/0x460 [nfs]
nfs_page_create_from_folio+0x7e/0x210 [nfs]
nfs_update_folio+0x7a9/0x32a0 [nfs]
nfs_write_end+0x290/0xc60 [nfs]
generic_perform_write+0x4ce/0x990
nfs_file_write+0x6b3/0xce0 [nfs]
vfs_write+0x63c/0xfa0
ksys_write+0x122/0x240
do_syscall_64+0xc3/0x13f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Freed by task 122046 on cpu 0 at 31647.037964s:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x13/0x60
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x3b/0x60
kmem_cache_free+0x11b/0x5a0
nfs_page_group_destroy+0x13a/0x210 [nfs]
nfs_unlock_and_release_request+0x64/0x90 [nfs]
nfs_commit_release_pages+0x339/0xbd0 [nfs]
nfs_commit_release+0x51/0xb0 [nfs]
rpc_free_task+0xee/0x160
rpc_async_release+0x5d/0xb0
process_one_work+0x9b0/0x1890
worker_thread+0x75a/0x10a0
kthread+0x3d3/0x4d0
ret_from_fork+0x669/0xa50
ret_from_fork_asm+0x11/0x20
The buggy address belongs to the object at ffff888118af2040\x0a which belongs to the cache nfs_page of size 96
The buggy address is located 24 bytes inside of\x0a freed 96-byte region [ffff888118af2040, ffff888118af20a0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x118af2
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x4000000000000040(head|zone=2)
page_type: f5(slab)
raw: 4000000000000040 ffff88818cf2c4c0 ffffea000e61b990 ffffea0004e7d110
raw: 0000000000000000 0000000800190019 00000000f5000000 0000000000000000
head: 4000000000000040 ffff88818cf2c4c0 ffffea000e61b990 ffffea0004e7d110
head: 0000000000000000 0000000800190019 00000000f5000000 0000000000000000
head: 4000000000000001 ffffffffffffff81 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000002
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 1, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 121997, tgid 121997 (rsync), ts 31643290274577, free_ts 31642154777182
post_alloc_hook+0xd1/0x100
get_page_from_freelist+0xbad/0x2910
__alloc_frozen_pages_noprof+0x1c6/0x4a0
allocate_slab+0x330/0x620
___slab_alloc+0xe9/0x930
kmem_cache_alloc_noprof+0x35b/0x4e0
nfs_page_create+0x152/0x460 [nfs]
nfs_page_create_from_folio+0x7e/0x210 [nfs]
nfs_update_folio+0x7a9/0x32a0 [nfs]
nfs_write_end+0x290/0xc60 [nfs]
generic_perform_write+0x4ce/0x990
nfs_file_write+0x6b3/0xce0 [nfs]
vfs_write+0x63c/0xfa0
ksys_write+0x122/0x240
do_syscall_64+0xc3/0x13f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
page last free pid 122202 tgid 122202 stack trace:
__free_frozen_pages+0x6da/0xf30
qlist_free_all+0x53/0x130
kasan_quarantine_reduce+0x198/0x1f0
__kasan_slab_alloc+0x46/0x70
kmem_cache_alloc_noprof+0x1ab/0x4e0
__alloc_object+0x2f/0x230
__create_object+0x22/0x80
kmem_cache_alloc_node_noprof+0x416/0x4d0
__alloc_skb+0x146/0x6e0
tcp_stream_alloc_skb+0x35/0x660
tcp_sendmsg_locked+0x1746/0x4260
tcp_sendmsg+0x2f/0x40
inet_sendmsg+0x9e/0xe0
__sock_sendmsg+0xd9/0x180
sock_sendmsg+0x122/0x200
xprt_sock_sendmsg+0x4ff/0x9a0
Memory state around the buggy address:
ffff888118af1f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc
ffff888118af1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888118af2000: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
^
ffff888118af2080: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888118af2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Reviewed-by Jeff Layton <jlayton@kernel.org>
Fixes: 5d3869a41f ("NFS: fix writeback in presence of errors")
Cc: Olga Kornievskaia <okorniev@redhat.com>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: linux-nfs@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Document the compatible strings for the sg2000 interrupt
controller and timer.
Signed-off-by: Joshua Milas <josh.milas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260530173347.33533-4-josh.milas@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Document the compatible strings for the Milk-V Duo S board [1]
which uses the SOPHGO SG2000 SoC.
Link: https://milkv.io/duo-s [1]
Signed-off-by: Joshua Milas <josh.milas@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260530173347.33533-2-josh.milas@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Update my email address as my original email provider may
block emails in kernel development.
Signed-off-by: Chen Wang <chen.wang@linux.dev>
Link: https://patch.msgid.link/20260507022058.3913-1-chen.wang@linux.dev
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Fix the following W=1 kerneldoc warnings by adding the missing parameter
descriptions for @phase0_identity and @nn_interpolation in
dcss_scaler_filter_design() and @phase0_identity in
dcss_scaler_gaussian_filter()
Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:173 function parameter 'phase0_identity' not described in 'dcss_scaler_gaussian_filter'
Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:270 function parameter 'phase0_identity' not described in 'dcss_scaler_filter_design'
Warning: drivers/gpu/drm/imx/dcss/dcss-scaler.c:270 function parameter 'nn_interpolation' not described in 'dcss_scaler_filter_design'
Fixes: 9021c317b7 ("drm/imx: Add initial support for DCSS on iMX8MQ")
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patch.msgid.link/20260406180013.2442096-1-yiconghui@gmail.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
When rustc prints an error containing a long type that doesn't fit
in a line, it will write the whole thing in a .txt file -- see commit
420dd187e1 (".gitignore: ignore rustc long type txt files") for more
details.
These files are purely compiler artifacts and are not created
intentionally by the build system.
Thus add them to the `clean` target to stop them from cluttering up the
source tree.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1236
Signed-off-by: Joel Kamminga <contact@jkam.dev>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260530184944.10459-1-contact@jkam.dev
[ Reworded and linked to the previous related commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The VIM4 board exposes a status LED wired to the PWM_AO_C_D output.
Enable the pwm_ao_cd controller with its pinmux, and declare a
pwm-leds node with a heartbeat trigger.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Link: https://patch.msgid.link/20260513-add-kvim4-sysled-v2-3-3ec9779e8875@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Move the xtal-clk node to restore alphabetical ordering.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260513-add-kvim4-sysled-v2-2-3ec9779e8875@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Enable and configure the three MMC controllers for the Khadas VIM4 board:
- sd_emmc_a: SDIO interface for the BCM43752 Wi-Fi module
- sd_emmc_b: SD card slot
- sd_emmc_c: eMMC storage
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Link: https://patch.msgid.link/20260326-add-emmc-t7-vim4-v5-9-d3f182b48e9d@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the SDIO power sequence node using mmc-pwrseq-simple and a
32.768kHz PWM-based clock required by the Wi-Fi module.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Link: https://patch.msgid.link/20260326-add-emmc-t7-vim4-v5-7-d3f182b48e9d@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add device tree nodes for the seven PWM controllers available
on the Amlogic T7 SoC, using amlogic,meson-s4-pwm as fallback compatible.
All nodes are disabled by default and should be
enabled in the board-specific DTS file.
Co-developed-by: Nick Xie <nick@khadas.com>
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Link: https://patch.msgid.link/20260326-add-emmc-t7-vim4-v5-5-d3f182b48e9d@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add device tree nodes for the three MMC controllers available
on the Amlogic T7 SoC, using amlogic,meson-axg-mmc as fallback compatible.
All nodes are disabled by default and should be
enabled in the board-specific DTS file.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260326-add-emmc-t7-vim4-v5-3-d3f182b48e9d@aliel.fr
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Khadas VIM1S board has an onboard IR receiver.
Configure the default keymap to "rc-khadas" to support the official
Khadas IR remote control.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260327093016.722095-4-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The Khadas VIM1S board has an on-board Haoyu Micro HYM8563 Real Time
Clock (RTC) connected to the I2C1 bus.
Enable the I2C1 controller and add the RTC child node to support
hardware clock persistence.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260327093016.722095-3-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the Virtual RTC (VRTC) controller node to the Meson S4 SoC dtsi.
Signed-off-by: Nick Xie <nick@khadas.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260327093016.722095-2-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Enable the SARADC controller and add the adc-keys node to support
the Function key found on the Khadas VIM1S board.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Nick Xie <nick@khadas.com>
Link: https://patch.msgid.link/20260325070618.81955-5-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add the SARADC (Successive Approximation Register ADC) controller
node to the Meson S4 SoC dtsi.
It uses the S4-specific compatible string with a fallback to the
G12A generation, as there are no known hardware differences.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Nick Xie <nick@khadas.com>
Link: https://patch.msgid.link/20260325070618.81955-4-nick@khadas.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add voltage regulator nodes describing the VIM4 power tree,
required by peripheral nodes such as the SD card controller.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Link: https://patch.msgid.link/20260326-add-emmc-t7-vim4-v5-6-d3f182b48e9d@aliel.fr
[narmstrong: squashed "Remove invalid property fix" from Ronald]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
strcpy() is deprecated; use strscpy() instead. Use the return value of
strscpy() instead of calling strlen() again, and ignore any potential
string truncation since both strings are much shorter than the buffer
size SPLPAR_MAXLENGTH.
Change both if conditions to silence the following checkpatch warnings:
Comparisons should place the constant on the right side of the test
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251013135703.97260-2-thorsten.blum@linux.dev
Indent several struct members using tabs instead of spaces.
Replace the typedef alias AOUTHDR with an explicit struct name to
silence a checkpatch warning.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250517125834.421088-2-thorsten.blum@linux.dev
Replace the deprecated one-element array with a modern flexible array
member in the struct rtas_error_log and add the __counted_by_be()
compiler attribute to improve access bounds-checking via
CONFIG_UBSAN_BOUNDS and CONFIG_FORTIFY_SOURCE.
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250813103101.163698-2-thorsten.blum@linux.dev
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions, which are preferred for formatting sysfs output because they
provide safer bounds checking.
While the current code only emits strings that fit easily within
PAGE_SIZE, use sysfs_emit() and sysfs_emit_at() to follow secure coding
best practices.
This is a mechanical cleanup with a few simple edge cases:
- In domains_show(), drop the redundant n < 0 check since neither
sprintf() nor sysfs_emit() return negative values.
- In powercap_show() and psr_show(), also drop the dead ret < 0 checks.
- In ps3_fw_version_show(), normalize the output by adding a terminating
newline as suggested by checkpatch.
- In vio's modalias_show(), replace the deprecated strcpy() [1] followed
by strlen() with sysfs_emit().
Leave validate_show() and the variable-length hv-gpci helpers unchanged
since they already have explicit bounds handling, and converting those
would be more than a mechanical conversion.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260524130002.793476-2-thorsten.blum@linux.dev
Commit 7cf2082e74 ("lib/crypto: powerpc/aes: Migrate POWER8 optimized
code into library") removed arch/powerpc/crypto/aes.c and moved
arch/powerpc/crypto/aesp8-ppc.pl to lib/crypto/powerpc/.
However, the "IBM Power VMX Cryptographic instructions" entry still
references the removed file and no longer covers the moved aesp8-ppc.pl.
Remove the stale entry, add lib/crypto/powerpc/aesp8-ppc.pl, and tighten
the arch/powerpc/crypto/aesp8-ppc.* pattern to match the remaining
header only.
Fixes: 7cf2082e74 ("lib/crypto: powerpc/aes: Migrate POWER8 optimized code into library")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Breno Leitao <leitao@debian.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260524212943.799757-3-thorsten.blum@linux.dev
fadump is registered in panic_notifier_list and gets triggered before
kmsg_dump_desc() in the panic path. As a result, kmsg_dumpers such as
pstore are not executed during fadump crashes.
This is problematic because pstore provides a critical fallback mechanism
for crash analysis. When fadump fails to successfully reboot the system
or capture a dump, pstore logs may be the only available information from
the crashed kernel. Without invoking kmsg_dump_desc() in the fadump path,
we lose this valuable diagnostic data.
Invoke kmsg_dump_desc() from the fadump panic handler, but only when
fadump is actually registered (checked via should_fadump_crash()). This
ensures kmsg_dumpers are called without duplicating the call that occurs
later in panic() when fadump is not active.
The call is placed before crash_fadump() to ensure logs are captured
before the system attempts to trigger the firmware-assisted dump.
Reported-by: Shirisha G <shirisha@linux.ibm.com>
Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Shivang Upadhyay <shivangu@linux.ibm.com>
Tested-by: Shirisha G <shirisha@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260412113057.46090-1-shivangu@linux.ibm.com
Add a warn_once to warn if the CPU target is not found. This could help
to find about any such usecase.
This is a very rare case, which either means mask was empty or
atomic update failed for all online CPUs. So it is worth printing that
path for potential fix.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Yury Norov <ynorov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427044715.559137-5-sshegde@linux.ibm.com
First online CPU in the node disables the nest counters by
making an OPAL call. Any other CPU in that node, will bail out.
Instead of using a temporary mask to find out if any cpu in the
node is visited or not, it is better to use the cpumask_intersects
api to achieve the same.
Similarly a temporary cpumask is used to check if a core is already part
of core_imc_cpumask. Use the same cpumask_intersects api there.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Yury Norov <ynorov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427044715.559137-4-sshegde@linux.ibm.com
- cpumask_next can take -1 as valid argument. So simplify cpuinfo
iterator.
- Use cpumask_last to find if this_cpu is last online CPU.
/proc/cpuinfo shows same info with patch.
Reviewed-by: Yury Norov <ynorov@nvidia.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Yury Norov <ynorov@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260427044715.559137-3-sshegde@linux.ibm.com
The ibm,configure-kernel-dump RTAS call sites in
rtas_fadump_register(), rtas_fadump_unregister(), and
rtas_fadump_invalidate() polled indefinitely while firmware returned
a busy status. A misbehaving or hung firmware could stall these paths
forever, blocking fadump registration at boot or preventing clean
teardown.
Introduce rtas_fadump_call(), a helper that wraps the common
busy-wait pattern shared by all three sites. The helper accumulates
the total delay and returns -ETIMEDOUT if firmware keeps returning a
busy status beyond RTAS_FADUMP_MAX_WAIT_MS (60 seconds). A pr_debug()
message is emitted on each busy iteration to aid diagnosis when the
timeout is hit.
Signed-off-by: Adriano Vero <adri.vero.dev@gmail.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
[Maddy: Fixed newline after Signed-off-by]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260506222024.30352-1-adri.vero.dev@gmail.com
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy.
Fixes: cdfad4db77 ("accel/ivpu: Add NPU profiling support")
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260529120841.135852-1-andrzej.kacprowski@linux.intel.com
Add validation that read and write indices in the firmware log buffer
are within valid bounds (< data_size) before using them. If
out-of-bounds indices are encountered (from firmware), clamp them to
safe values instead of proceeding with invalid offsets.
This prevents potential out-of-bounds buffer access when firmware
supplies invalid log indices.
Fixes: 1fc1251149 ("accel/ivpu: Refactor functions in ivpu_fw_log.c")
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260529115842.135378-1-andrzej.kacprowski@linux.intel.com
Validate that the firmware runtime memory specified in the image
header is properly aligned and sized to hold the firmware image.
This prevents errors during memory allocation and image transfer.
Fixes: 2007e210b6 ("accel/ivpu: Split FW runtime and global memory buffers")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260529120853.135876-1-andrzej.kacprowski@linux.intel.com
When verifier sees a timed may_goto instruction, it emits a call to
arch_bpf_timed_may_goto() with a stack offset in BPF_REG_AX
(powerpc64 R12) and expects the refreshed count value to be returned
in the same register. The verifier doesn't save or restore any registers
before emitting this call.
arch_bpf_timed_may_goto() should act as a trampoline to call
bpf_check_timed_may_goto() with powerpc64 ELF ABI calling convention.
To support this custom calling convention, implement
arch_bpf_timed_may_goto() in assembly and make sure BPF caller saved
registers are preserved, then call bpf_check_timed_may_goto with
the powerpc64 ABI calling convention where first argument and return
value both are in R3. Finally, move the result back into BPF_REG_AX(R12)
before returning.
Also, introduce bpf_jit_emit_func_call() that computes the offset from
kernel_toc_addr(), validates that the target and emits the ADDIS/ADDI
sequence to load the function address before performing the indirect
branch via MTCTR/BCTRL. The existing code in bpf_jit_emit_func_call_rel()
is refactored to use this function.
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260403105016.74775-1-skb99@linux.ibm.com
memblock allocations now reserve memory with MEMBLOCK_RSRV_KERN and,
on NUMA configurations, record the requested node on the reserved
region. Several memblock simulator NUMA tests still expected merges
that only worked before those reservation semantics changed, so the
suite aborted even though the allocator behavior was correct.
Update the NUMA merge expectations in the memblock_alloc_try_nid()
and memblock_alloc_exact_nid_raw() tests to match the current reserved
region metadata rules. For cases that should still merge, create the
pre-existing reservation with matching nid and MEMBLOCK_RSRV_KERN
metadata. Also strengthen the memblock_alloc_node() coverage by
checking the newly created reserved region directly instead of
re-reading the source memory node descriptor.
Finally, drop the stale README/TODO notes that still claimed
memblock_alloc_node() could not be tested.
The memblock simulator passes again with NUMA enabled after these
updates.
Signed-off-by: Priyanshu Kumar <priyanshukumarpu@gmail.com>
Link: https://patch.msgid.link/20260415122731.1768912-1-priyanshukumarpu@gmail.com
[rppt: dropped unrelated changes]
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
When splitting NUMA node uniformly, split_nodes_size_interleave_uniform()
returns the next absolute node ID, not the number of nodes created.
The existing under-allocation detection logic compares next absolute node
ID (ret) and request count (n), which only works when nid starts at 0.
For example, on a system with 2 physical NUMA nodes (node 0: 2GB, node
1: 128MB) and numa=fake=8U, 8 fake nodes are successfully created from
node 0 and split_nodes_size_interleave_uniform() returns 8. For node 1,
fake node nid starts at 8, but only 4 fake nodes are created due to
current FAKE_NODE_MIN_SIZE being 32MB, and
split_nodes_size_interleave_uniform() returns 12. By existing
under-allocation detection logic, "ret < n" (12 < 8) is false, so the
under-allocation will not be detected.
Fix under-allocation detection logic to compare the number of actually
created nodes (ret - nid) against the request count (n). Also skip
under-allocation detection logic for memoryless physical nodes where no
fake nodes are created.
Also, fix the outdated comment describing
split_nodes_size_interleave_uniform() to match the actual return value.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reported-by: Donghyeon Lee <asd142513@gmail.com>
Reported-by: Munhui Chae <mochae@student.42seoul.kr>
Fixes: cc9aec03e5 ("x86/numa_emulation: Introduce uniform split capability") # 4.19
Link: https://patch.msgid.link/20260417135805.1758378-1-ekffu200098@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Follow the same approach as other architectures such as Arm or RISC-V,
and build devicetrees based on platforms selected in Kconfig. This makes
it unnecessary to use CONFIG_OF_ALL_DTBS on PowerPC in order to build
DTB files.
This makes it easier to use other build and test infrastructure such as
`make dtbs_check`, and is a first step towards generating FIT images
that include all the relevant DTBs with `make image.fit`.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260315-mpc83xx-dtb-v4-1-243849be4280@posteo.net
These are the remaining PowerPC devicetrees that do not have a /model
property, even though it is required by the devicetree specification.
Fix them by simply copying the compatible string.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260313-ppc-model-v1-2-bf19b3d1b65d@posteo.net