Commit bf9e4e30f3 ("x86/mm: use pagetable_free()"), switched from
freeing non-boot page tables through __free_pages() to
pagetable_free().
However, the function is also called to free vmemmap pages.
Given that vmemmap pages are not page tables, already the page_ptdesc(page)
is wrong. But worse, pagetable_free() calls:
__free_pages(page, compound_order(page));
Since vmemmap pages are not compound pages (see vmemmap_alloc_block())
-- except for HVO, which doesn't apply here -- only first page of a
PMD-sized vmemmap page is freed, leaking the other ones.
Fix it by properly decoupling pagetable and vmemmap freeing.
free_pagetable() no longer has to mess with SECTION_INFO, as only the
vmemmap is marked like that in register_page_bootmem_memmap().
The indentation in remove_pmd_table() is messed up. Fix that while
touching it.
Bootmem info handling will soon be fixed up. For now, handle it
similar to free_pagetable(), just avoiding the ifdef.
[ dhansen: changelog munging. More imperative voice ]
Fixes: bf9e4e30f3 ("x86/mm: use pagetable_free()")
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Tested-by: Lance Yang <lance.yang@linux.dev>
Link: https://lore.kernel.org/20260429-vmemmap-v2-1-8dfcacffd877@kernel.org
Link: https://patch.msgid.link/20260429-vmemmap-v2-1-8dfcacffd877@kernel.org
Cc: stable@vger.kernel.org
The xfstests' test-case generic/637 fails with error:
FSTYP -- hfs
PLATFORM -- Linux/x86_64 kvm-xfstests 6.15.0-rc4-xfstests-g00b827f0cffa #1 SMP PREEMPT_DYNAMIC Fri May 25
MKFS_OPTIONS -- /dev/vdc
MOUNT_OPTIONS -- /dev/vdc /vdc
QA output created by 637
entries 7 and 8 have duplicate d_off 8
Found unlinked files in open dir (see xfstests-dev/results//generic/637.full for details)
Likewise HFS+, currently, HFS has very complicated and
fragile logic of rd->file->f_pos correction in hfs_delete_cat().
This patch removes this logic and it stores the current
pos into hfs_readdir_data. Finally, if rd->pos == ctx->pos
then hfs_readdir() tries to find the position in
b-tree's node by means of hfs_cat_key. This position is
used to re-start the folder's content traversal.
sudo ./check generic/637
FSTYP -- hfs
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 7.1.0-rc1+ #55 SMP PREEMPT_DYNAMIC Tue May 19 15:18:02 PDT 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/637 32s ... 31s
Ran: generic/637
Passed all 1 tests
Closes: https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/65
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260519222811.1311071-2-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
print_worker_info() declares its local 'fn' as work_func_t * but
worker->current_func has type work_func_t (a function pointer). The
extra level of indirection is wrong and only happens to be harmless
today because every supported Linux architecture has
sizeof(work_func_t) == sizeof(work_func_t *):
copy_from_kernel_nofault() reads the correct number of bytes by
accident, and %ps still resolves the printed address because the
stored value is the function address regardless of declared type.
On any future ABI where sizeof(void (*)()) differs from
sizeof(void *), the nofault copy would transfer the wrong number of
bytes and the subsequent %ps would print an incorrect address.
Match the field type so the intent is explicit and the code does not
silently rely on equal pointer sizes.
Fixes: 3d1cb2059d ("workqueue: include workqueue info when printing debug dump of a worker task")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add BIT_ULL(35) (CpuidUserDis) to the valid mask in hwcr_msr_test, now that
KVM accepts writes to this bit when the guest CPUID advertises
CpuidUserDis.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260527174347.2356165-6-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On AMD CPUs, CPUID faulting support is advertised via
CPUID.80000021H:EAX.CpuidUserDis[bit 17] and enabled by setting
HWCR.CpuidUserDis[bit 35].
Advertise the feature to userspace regardless of host CPU support. Allow
writes to HWCR to set bit 35 when the guest CPUID advertises
CpuidUserDis. Update cpuid_fault_enabled() to check HWCR.CpuidUserDis as
well as MSR_FEATURE_ENABLES.CPUID_GP_ON_CPL_GT_0.
Unlike VMX, SVM prioritizes the CPUID intercept over the #GP induced by
CPUID faulting.[1] This behavior has been confirmed on a Turin CPU (F/M/S
1AH/2/1).
Link: https://lore.kernel.org/r/DS7PR12MB82011943131DF5415365E19E940B2@DS7PR12MB8201.namprd12.prod.outlook.com [1]
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260527174347.2356165-5-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The function, supports_cpuid_fault(), tests specifically for guest support
of Intel's CPUID faulting feature. It does not test for guest support of
AMD's CPUID faulting feature.
To avoid confusion, remove the helper.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260527174347.2356165-4-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Per the Intel SDM, "Certain exceptions have priority over VM exits. These
include invalid-opcode exceptions, faults based on privilege level, and
general-protection exceptions that are based on checking I/O permission
bits in the task-state segment (TSS)."
Ensure that when L2 executes CPUID at CPL > 0 while L1 has enabled CPUID
faulting, KVM intercepts the exit in L0 and queues #GP rather than
forwarding the CPUID VM-exit to L1.
Empirical testing confirms that this #GP has higher precedence than a CPUID
VM-exit on Granite Rapids (F/M/S 6/0xad/1).
Fixes: db2336a804 ("KVM: x86: virtualize cpuid faulting")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260513224608.1859737-1-jmattson%40google.com?part=3
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260527174347.2356165-3-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the logic for emulating CPUID faulting (where CPUID #GPs at CPL>0
outside of SMM) into a dedicated helper and use the helper for both the
full emulator and the intercepted-CPUID paths.
Opportunistically drop kvm_require_cpl(), as kvm_emulate_cpuid() was the
one and only user.
No functional change intended.
[jim: Add EXPORT_STATIC_CALL_GPL(kvm_x86_get_cpl) so that KVM vendor
modules can call kvm_is_cpuid_allowed(). Fix typo in commit message.]
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260527174347.2356165-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|| is a boolean operator, any nonzero (error) return short-circuits
to 1 rather than the actual errno. The caller in scx_init() logs and
propagates this value, so the wrong code reaches upper layers.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add boundary checks in acpi_ps_get_next_namestring() and
acpi_ps_peek_opcode() to prevent out-of-bounds access.
Link: cfdc96896d
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5180044.0VBMTVartN@rafael.j.wysocki
The debug code in acpi_ps_delete_parse_tree() uses ("%*.s", level * 4, " ")
to indent traces.
POSIX requires the empty precision be treated as zero, but the kernel treats
is as 'no precision specified'.
Change to ("%*s", level * 4, "") since there is additional whitespace and no
reason to indent by one space when level is zero.
Link: a87038098a
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2914242.BEx9A2HvPv@rafael.j.wysocki
Enhance OEM ID and Table ID validation in acpi_ex_load_table_op() to
prevent buffer overflows.
Link: f85a43098d
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2230782.OBFZWjSADL@rafael.j.wysocki
acpi_ns_custom_package() unconditionally dereferences the first element
of the package to read the _BIX version number, without checking for
NULL:
if ((*Elements)->Common.Type != ACPI_TYPE_INTEGER)
When firmware returns a _BIX package whose first element is an
unresolvable reference, ACPICA evaluates that entry to NULL.
acpi_ns_remove_null_elements() does not strip NULL entries for
ACPI_PTYPE_CUSTOM packages (fixed-position format would break if
elements were shifted), so acpi_ns_custom_package() sees the NULL
and causes a crash.
Add a NULL check for the first element (version field) before
dereferencing it. The caller then receives AE_AML_OPERAND_TYPE
instead of crashing.
Link: f3f111b901
Reported-by: Xiang Mei <xmei5@asu.edu>
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5674388.Sb9uPGUboI@rafael.j.wysocki
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities.
Link: b35adf49e8
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/118666237.nniJfEyVGO@rafael.j.wysocki
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler().
Link: f6fc648a13
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/48111441.fMDQidcC6G@rafael.j.wysocki
Improve argument parsing in acpi_ps_get_next_simple_arg() to handle
remaining AML data safely.
Link: ecbb8bcfe3
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2008043.taCxCBeP46@rafael.j.wysocki
Add overflow check for Index + Length to prevent integer overflow
when calculating the truncation length. This prevents negative
size parameter being passed to memcpy().
Link: d281ec1ac8
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3760974.R56niFO833@rafael.j.wysocki
Prevent adding references for local, argument, and debug objects
in acpi_ut_copy_simple_object().
Link: f576898d78
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4511989.ejJDZkT8p0@rafael.j.wysocki
Fix use-after-free issue in acpi_ds_terminate_control_method() by
clearing references to method locals and arguments.
Link: 36f22a94cb
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8730924.NyiUUSuA9g@rafael.j.wysocki
For ACPI_RSC_MOVE8, the 'Value' field in struct acpi_rsconvert_info
is the item count count and not a bit position like for the
bitflags. Set 'Value' as '1' to fix this.
Conversion still works coincidentally with '0' because
item_count is not reset between table entries, and the previous
count value was taking effect.
Link: 70082dc8fc
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6164740.MhkbZ0Pkbq@rafael.j.wysocki
When the 64-bit address is set but bit_width is 0, the spec says
the legacy length should be used. That is valid firmware.
Skip the warning if bit_width is 0.
This avoids false warnings like:
32/64X length mismatch in FADT/gpe0_block: 128/0
Tested on free_BSD 16.0-CURRENT.
Link: b6387a387c
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8688362.T7Z3S40VBb@rafael.j.wysocki
- Mark nodes as alias in ld_namespace2_begin() function.
- Skip teardown for alias nodes in acpi_ns_detach_object() function.
- Define ANOBJ_IS_ALIAS flag in aclocal.h.
Link: cfcc46c4f7
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/14020896.uLZWGnKmhe@rafael.j.wysocki
Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent
out-of-bounds access.
Link: 3b537b9233
Signed-off-by: ikaros <void0red@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1959692.tdWV9SEqCh@rafael.j.wysocki
ACPI 6.6 introduces "Test" command for Multiprocessor Wakeup as well as
resetting the Multiprocessor Wakeup Mailbox
Link: a4f629dc90
Signed-off-by: Pawel Chmielewski <pawel.chmielewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2414431.ElGaqSPkdT@rafael.j.wysocki
Commit 47ac2a4b5c ("rust: kvec: implement shrink_to for KVVec")
introduced a call to bindings::is_vmalloc_addr(). However, this
fails to compile on architectures where CONFIG_MMU is disabled,
resulting in the following build error:
error[E0425]: cannot find function `is_vmalloc_addr` in crate `bindings`
--> rust/kernel/alloc/kvec.rs:781:32
|
781 | if !unsafe { bindings::is_vmalloc_addr(self.ptr.as_ptr().cast()) } {
| ^^^^^^^^^^^^^^^ not found in `bindings`
When CONFIG_MMU is not set, is_vmalloc_addr() is defined as a
static inline function in <linux/mm.h> that unconditionally
returns false. Because bindgen skips static inline functions
when generating bindings, the symbol is completely missing from
the Rust bindings crate.
Fix this by providing a C helper wrapper, rust_helper_is_vmalloc_addr(),
in rust/helpers/vmalloc.c. This ensures the function is reliably
exposed to Rust regardless of the MMU configuration. On NOMMU builds,
this allows KVVec::shrink_to() to successfully compile and correctly
route all allocations through the kmalloc realloc path.
Fixes: 47ac2a4b5c ("rust: kvec: implement shrink_to for KVVec")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605220811.LRplxeBR-lkp@intel.com/
Signed-off-by: Shivam Kalra <shivamkalra98@zohomail.in>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260523-is-vmalloc-addr-build-fix-v1-1-73c919440c41@zohomail.in
[ Pasted exact compiler output and expanded it. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
nvme_setup_descriptor_pools() indexes dev->descriptor_pools[] using the
numa_node forwarded from hctx->numa_node by its single caller,
nvme_init_hctx_common(). On a non-NUMA kernel hctx->numa_node is
NUMA_NO_NODE (-1). Because the parameter was declared 'unsigned', the
value becomes UINT_MAX and the index walks off the array (sized to
nr_node_ids), faulting during nvme_alloc_ns() and leaving the namespace
without a /dev node.
Reproduces on any NVMe controller probed by a CONFIG_NUMA=n kernel:
BUG: unable to handle page fault for address: ffff889101603d38
RIP: 0010:nvme_init_hctx_common+0x5a/0x190 [nvme]
Call Trace:
nvme_init_hctx+0x10/0x20 [nvme]
nvme_alloc_ns+0x9e/0xa10 [nvme_core]
nvme_scan_ns+0x301/0x3b0 [nvme_core]
nvme_scan_ns_async+0x23/0x30 [nvme_core]
Switch the parameter to int and fall back to node 0 when it is
NUMA_NO_NODE; node 0 is always present.
Fixes: d977506f88 ("nvme-pci: make PRP list DMA pools per-NUMA-node")
Link: https://lore.kernel.org/r/20260309062840.2937858-2-iam@sung-woo.kim
Reported-by: Sung-woo Kim <iam@sung-woo.kim>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mateusz Nowicki <mateusz.nowicki@posteo.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
This mirrors the egpio support added to sc7280/sm8450/sm8250/etc. This change
is necessary for GPIOs 98-112 (15 GPIOs) to be used as normal GPIOs.
Signed-off-by: Stanislav Zaikin <zstaseg@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Otherwise we don't invalidate page tables on next CS.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b6444d1bcb)
Cc: stable@vger.kernel.org
Due to a hardware defect, for Loongson PCI HDMI devices with a reversion
ID of 2, the pin sense status must be determined via the ELD.
Add a codec flag, eld_jack_detect, to indicate this case, and do special
handlings in read_pin_sense().
Cc: stable@vger.kernel.org
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Haowei Zheng <zhenghaowei@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260527140841.3407183-1-chenhuacai@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The notifier sequence must only be read once or otherwise we could work
with invalid pages.
While at it also fix the coding style, e.g. drop the pre-initialized
return value and use the common define for 2G range.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c08972f555)
Cc: stable@vger.kernel.org
Use arrays instead of list for userq_vas since we have fixed no
of bos. Also, we dont have to worry to free that memory later
since this array would be free along with queue only.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ef7dc711a6)
mqd_destroy cleans up queue core objects like mqd and fw_object
which are needed for any pending fence to signal properly.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ad65d6100)
get_queue_ids() computes array_size = num_queues * sizeof(uint32_t),
which could overflow on 32-bit size_t build. using array_size()
instead, it saturates to SIZE_MAX on overflow.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2d57a0475f)
Cc: stable@vger.kernel.org
Remove the amdgpu_userq_create/destroy_object wrappers and
use directly the kernel bo allocation function which does all the
things which are done in wrapper.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit deb02080ca)
When no displays are connected, there is no vblank
happening so the power management code shouldn't
worry about it.
This fixes a regression that caused the memory clock
to be stuck at maximum when there were no displays
connected to a SI GPU.
Fixes: 9003a07468 ("drm/amd/pm: Treat zero vblank time as too short in si_dpm (v3)")
Fixes: 9d73b107a6 ("drm/amd/pm: Use pm_display_cfg in legacy DPM (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Jeremy Klarenbeek <jeremy.klarenbeek99@gmail.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6d87e0199f)
Cc: stable@vger.kernel.org
CRIU restore ioctls are meant to be called by CRIU with no
existing drm file. There's an error path
for if the drm file unexpectedly exists. It was positioned so
it was missing a fput(drm_file).
Do that check earlier, as soon as we have the pdd.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2bab781dac)
Cc: stable@vger.kernel.org
Use snprintf() with sizeof(fs_info.debugfs_name) so a long RAS block
name plus the "_err_inject" suffix cannot overflow the 32-byte buffer.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1a58070fda)
Thread 1: Running amdgpu_userq_destroy which eventually remove
the queue from door bell and set userq_mgr = NULL.
Thread2: An interrupt might have scheduled the hang_detect_work
which still need userq_mgr to be valid but could get an NULL
ptrs.
To fix that make sure we cancel the hang_detect_work again before
setting userq_mgr to NULL.
Along with that we also need all the queue va to remain valid till
we could be running anything on the queue and hence moving the
userq_va post hang_detect handler is cancelled.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1a66ceb98b)