The perf ftrace test case runs:
perf ftrace profile --graph-opts depth=5 sleep 0.1
and checks that the output contains a *clock_nanosleep function with a
count of 1.
This fails on a risc-v system that uses musl as its C library. musl's
nanosleep syscall wrapper uses either the nanosleep or the
clock_nanosleep syscall.
Filter for sys_*nanosleep to allow both syscalls.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
io_uring_try_cancel_requests() dropped ctx->uring_lock before calling
io_kill_timeouts(), which walks each timeout's link chain via
io_match_task() to test REQ_F_INFLIGHT. With chain mutation now
serialized by ctx->uring_lock, that walk needs the lock too.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_link_timeout_fn() is the hrtimer callback that fires when a linked
timeout expires. It currently calls io_remove_next_linked(prev) under
ctx->timeout_lock to splice the timeout request out of the link chain.
This is the only chain-mutation site that runs without ctx->uring_lock,
because hrtimer callbacks cannot take a mutex. Defer the splicing until
the task_work callback.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_wq_free_work() calls io_req_find_next() from io-wq worker context,
which reads and clears req->link without holding any lock. This can
potentially race with other paths that mutate the same chain under
ctx->uring_lock.
Take ctx->uring_lock around the io_req_find_next() call. Only requests
with IO_REQ_LINK_FLAGS reach this path, which is not the hot path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a controller connects, nvme_start_ctrl() emits the
"NVME_EVENT=connected" uevent and sets the NVME_CTRL_STARTED_ONCE flag.
Currently, the uevent is emitted before the flag is set. This creates a
race condition for userspace tools (like udev rules) that might rely on
the "connected" event to configure other attributes.
Swap the order of operations in nvme_start_ctrl() so that the
NVME_CTRL_STARTED_ONCE flag is set before the uevent is sent. This
guarantees that the admin_timeout can already be changed when userspace
is notified.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Use a flexible array member (FAM) to combine hwmods array allocation
with the omap_device structure. This reduces the number of allocations
from two separate calls (one for the device, one for the array) to a
single allocation, improving efficiency and reducing memory fragmentation.
The FAM approach also enables bounds checking through __counted_by(),
which provides runtime verification that array accesses stay within
the allocated size. This improves security and helps catch bugs during
development.
Simplify error handling by removing the unnecessary multi-label goto
pattern. The new code is more straightforward: allocate, verify, copy
data, and either return success or error immediately.
Also removes the now-redundant kfree(od->hwmods) in omap_device_delete()
since the hwmods array is now embedded in the structure rather than
separately allocated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260330213528.18187-1-rosenp@gmail.com
Signed-off-by: Kevin Hilman (TI) <khilman@baylibre.com>
Since every platform driver can be forced to match a device that doesn't
match its list of device IDs because of device_match_driver_override(),
platform drivers that rely on the existence of a device's ACPI companion
object should verify its presence.
Accordingly, add requisite ACPI_COMPANION() or ACPI_HANDLE() checks
against NULL to 13 platform drivers handling core ACPI devices.
Also change the value returned by the ACPI thermal zone driver when
the device's ACPI companion is not present to -ENODEV for consistency
with the other drivers.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4516068.ejJDZkT8p0@rafael.j.wysocki
Cc: 7.0+ <stable@vger.kernel.org> # 7.0+
The Lenovo diagnostics and support team have requested a mechanism
to get the raw data from the HWDD commands to support customer debug
situations.
Add a debugfs entry to display the HWDD raw data.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260429015210.1863316-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use a flexible array member to combine allocations. Avoids having to
free separately.
Add __counted_by for extra runtime analysis.
Move counting variable assignment to after allocations as is already
done by kzalloc_flex for GCC 15 and above.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260430224307.109311-1-rosenp@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Change to a flexible array member to allocate once instead of twice.
Use __counted_by for extra runtime analysis. Move the counting
variable assignment to right after allocation as done by
kzalloc_flex for GCC 15 and above.
Remove + 1 to allocation. It's already done in the previous line.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260430221555.83351-1-rosenp@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the platform driver is loaded or unloaded, it overwrites the
existing LED states. This can cause a loss of early boot state when the
driver loads, and it can cause the ALARM contact to change state or
flicker.
Explicitly retain the existing LED state to prevent overwriting on
driver load and unload.
Tested-By: Robert Joslyn <robert.joslyn@redrectangle.org>
Reviewed-by: Robert Joslyn <robert.joslyn@redrectangle.org>
Signed-off-by: Brodie Abrew <brodie_abrew@selinc.com>
Link: https://patch.msgid.link/20260507004916.6710-1-brodie_abrew@selinc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the OLPC XO-1.5 ebook switch driver from an
ACPI driver to a platform one.
After this change, the input device registered by the driver will appear
under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8688586.T7Z3S40VBb@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3420768.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix formatting of two labels in ebook_switch_add() to make that
function follow the current kernel coding style more closely.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/14016199.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device_set_wakeup_enable() call in ebook_switch_add() doesn't
actually do anything because power.can_wakeup is not set for ACPI
device objects. Moreover, had it done anything, it would have
registered a wakeup source object that wouldn't have been used
going forward and that wakeup source would have been leaked after
driver removal because ebook_switch_remove() doesn't clean it up.
Accordingly, remove that call from ebook_switch_add().
Also prevent leaking an enabled ACPI GPE after removing the driver by
adding appropriate cleanup code to ebook_switch_remove().
Fixes: 89ca11771a ("OLPC XO-1.5 ebook switch driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1966125.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler)
Fixes: 7f80a2fd7d ("exit: Stop poorly open coding do_task_dead in make_task_dead")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge the mmc fixes for v7.1-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add voltage switching infrastructure for UHS-I modes by integrating both
regulator framework (for supply voltage control) and pinctrl state
switching (for pin drive strength optimization).
- Add regulator supply parsing and voltage switching callback
- Add optional pinctrl state switching between "default" (3.3V) and
"state_uhs" (1.8V) configurations
- Enable coordinated voltage and pin configuration changes for UHS modes
This provides complete voltage switching support while maintaining
backward compatibility when pinctrl states are not defined.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Tested-by: Vincent Legoll <legoll@online.fr>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ensure SD card pins receive clock signals by enabling pad clock
generation and overriding automatic clock gating. Required for all SD
operation modes.
The SDHC_GEN_PAD_CLK_ON setting in LEGACY_CTRL_REG is safe for both SD
and eMMC operation as both protocols use the same physical MMC interface
pins and require proper clock signal generation at the hardware level
for signal integrity and timing.
Additional SD-specific clock overrides (SDHC_OVRRD_CLK_OEN and
SDHC_FORCE_CLK_ON) are conditionally applied only for SD-only
controllers to handle removable card scenarios.
Tested-by: Anand Moon <linux.amoon@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Tested-by: Vincent Legoll <legoll@online.fr>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document pinctrl properties to support voltage-dependent pin
configuration switching for UHS-I SD card modes.
Add optional pinctrl-names property with two states:
- "default": For 3.3V operation with standard drive strength
- "state_uhs": For 1.8V operation with optimized drive strength
These pinctrl states allow the SDHCI driver to coordinate voltage
switching with pin configuration changes, ensuring proper signal
integrity during UHS-I mode transitions.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Limiting the scope of devicetree support to CONFIG_OF prevents use of this
driver with ACPI via PRP0001. Drop the dependency.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260508082716.1156192-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
The whole purpose of the terminator entry is to be the last one.
The trailing comma makes this statement prone to failure. On top
of that the style is used for the entries is unusual. Standardize
this all by moving terminator entries to their own lines and drop
trailing commas.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260508082716.1156192-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Yazhou Tang says:
====================
bpf: Fix call offset truncation and OOB read in bpf_patch_call_args()
From: Yazhou Tang <tangyazhou518@outlook.com>
This patchset addresses a silent truncation bug in the BPF verifier that
occurs when a bpf-to-bpf call involves a massive relative jump offset.
Additionally, it fixes a pre-existing out-of-bounds (OOB) read issue
in the interpreter fallback path.
Because the BPF instruction set utilizes a 32-bit imm field for bpf-to-bpf
calls, implicitly downcasting it to the 16-bit insn->off in bpf_patch_call_args()
causes incorrect call targets or subprog ID resolution for large BPF programs.
While fixing this by swapping the imm and off fields, it was discovered that
the original code also had a load-time OOB read vulnerability when the stack
depth exceeds MAX_BPF_STACK during JIT fallback.
Patch 1/3 fixes the pre-existing OOB read in bpf_patch_call_args(). It
changes the function to return an int and explicitly rejects the JIT
fallback if the stack depth exceeds MAX_BPF_STACK, preventing a potential
stack buffer overflow.
Patch 2/3 fixes the s16 truncation bug.
1. Keep the original imm field unchanged and use the off field to store
the interpreter function index.
2. Adjust the JMP_CALL_ARGS case in ___bpf_prog_run() accordingly.
3. Restore the legacy xlated dump layout in bpf_insn_prepare_dump().
Patch 3/3 introduces a selftest for this fix.
---
Change log:
v10:
1. Make the error log in patch 1/3 more clear. (Kuohai)
2. Drop bpftool and disasm_helpers.c changes, and instead restore the
legacy xlated dump layout in bpf_insn_prepare_dump(). This avoids
requiring bpftool compatibility handling. (Quentin and Alexei)
v9: https://lore.kernel.org/bpf/20260429171904.107244-1-tangyazhou@zju.edu.cn/
1. Modify the selftest in patch 3/3: use __clobber_all in inline asm.
(Sashiko AI reviewer)
v8: https://lore.kernel.org/bpf/20260429105608.92741-1-tangyazhou@zju.edu.cn/
1. Update cfg_partition_funcs() in bpftool to use insn->imm for call target
calculation. (Sashiko AI reviewer)
2. Modify the selftest in patch 3/3: add a large padding before the call
instruction, preventing the kernel panic on kernel without the fix.
(Sashiko AI reviewer)
3. Modify the selftest in patch 3/3: make it more clear.
v7: https://lore.kernel.org/bpf/20260421144504.823756-1-tangyazhou@zju.edu.cn/
1. Rebase the patchset to the bpf-next tree to resolve the apply conflict.
(Alexei)
2. Add Patch 1/3 to properly fix a pre-existing OOB read in bpf_patch_call_args().
(Sashiko AI reviewer)
v6: https://lore.kernel.org/bpf/20260412170334.716778-1-tangyazhou@zju.edu.cn/
1. Use a different but clearer approach to resolve this issue: keeping
the original imm field unchanged and using the off field to store the
interpreter function index. (Kuohai)
2. Update the related dumper code and remove a previous workaround in the
selftests disasm helpers, which is no longer needed after this fix.
v5: https://lore.kernel.org/bpf/20260326090133.221957-1-tangyazhou@zju.edu.cn/
1. Some minor changes in commit messages. (AI Reviewer)
v4: https://lore.kernel.org/bpf/20260326063329.10031-1-tangyazhou@zju.edu.cn/
1. Remove some redundant commit messages of patch 2/3. (Emil)
2. Change the number of instructions in padding_subprog() from 200,000
to 32,765, which is the minimum number of instructions required to
trigger the verifier failure. (Emil)
v3: https://lore.kernel.org/bpf/20260323122254.98540-1-tangyazhou@zju.edu.cn/
1. Resend to fix a typo in v2 and add "Fixes" tag. The rest of the changes
are identical to v2.
v2 (incorrect): https://lore.kernel.org/bpf/20260323081748.106603-1-tangyazhou@zju.edu.cn/
1. Move the s16 boundary check from fixup_call_args() to bpf_patch_call_args(),
and change the return type of bpf_patch_call_args() to int. (Emil)
2. Add Patch 3/3 to fix the incorrect subprog ID in dumped bpf_pseudo_call
instructions, which is caused by the same truncation issue. (Puranjay)
3. Refine the new selftest for clarity and add detailed comments explaining
the test design. (Emil)
v1: https://lore.kernel.org/bpf/20260316190220.113417-1-tangyazhou@zju.edu.cn/
====================
Link: https://patch.msgid.link/20260506094714.419842-1-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest to verify the verifier and JIT behavior when handling
bpf-to-bpf calls with relative jump offsets exceeding the s16 boundary.
The test utilizes an inline assembly block with ".rept 32765" to generate
a massive dummy subprogram. By placing this padding between the main
program and the target subprogram, it forces the verifier to process a
bpf-to-bpf call where the imm field exceeds the s16 range.
- When JIT is enabled, it asserts that the program is successfully loaded
and executes correctly to return the expected value. Since the fix
does not change the JIT behavior, the test passes whether the fix is
applied or not.
- When JIT is disabled, it also asserts that the program is successfully
loaded and executes correctly to return the expected value 3.
- Before the fix, the verifier rewrites the call instruction with a
truncated offset (here 32768 -> -32768) and lets it pass. When the
program is executed, the call instruction will go to a wrong target
(the landing pad) instead of the intended subprogram, then return -1
and fail.
- After the fix, the verifier correctly handles the large offset and
allows it to pass. The program then executes correctly to return the
expected value 3.
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-4-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the BPF instruction set allows bpf-to-bpf calls (or internal
calls, pseudo calls) to use a 32-bit imm field to represent the relative
jump offset.
However, when JIT is disabled or falls back to the interpreter, the
verifier invokes bpf_patch_call_args() to rewrite the call instruction.
In this function, the 32-bit imm is downcast to s16 and stored in the off
field.
void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth)
{
stack_depth = max_t(u32, stack_depth, 1);
insn->off = (s16) insn->imm;
insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] -
__bpf_call_base_args;
insn->code = BPF_JMP | BPF_CALL_ARGS;
}
If the original imm exceeds the s16 range (i.e., a jump offset greater
than 32767 instructions), this downcast silently truncates the offset,
resulting in an incorrect call target.
Fix this by:
1. In bpf_patch_call_args(), keeping the imm field unchanged and using the
off field to store the index of the interpreter function.
2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the
interpreter function pointer from the interpreters_args array using the
off field as the index, and passing the original imm to calculate the
last argument of the interpreter function.
After these changes, the truncation issue is resolved, and __bpf_call_base_args
is also no longer needed and can be removed, which makes the code cleaner.
Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the
retrieval of the interpreter function pointer from pointer addition to
direct array indexing improves performance. The possible reason is that the
latter has better instruction-level parallelism. See the v5 discussion [1]
for more details.
[1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/
To avoid requiring bpftool changes, keep the new imm/off encoding internal
and restore the legacy xlated dump layout in bpf_insn_prepare_dump().
For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead
of a truncated and misleading value.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Fixes: 7105e828c0 ("bpf: allow for correlation of maps and helpers in dump")
Suggested-by: Xu Kuohai <xukuohai@huaweicloud.com>
Suggested-by: Puranjay Mohan <puranjay@kernel.org>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The interpreters_args array only accommodates stack depths up to
MAX_BPF_STACK (512 bytes). However, do_misc_fixups() may allow a larger
stack depth if JIT is requested.
If JIT compilation later fails and falls back to the interpreter, the
verifier invokes bpf_patch_call_args() with this oversized stack depth.
This causes a load-time out-of-bounds (OOB) read when calculating the
interpreter function pointer index.
Fix this by changing bpf_patch_call_args() to return an int and explicitly
rejecting the JIT fallback (returning -EINVAL) if the stack depth exceeds
MAX_BPF_STACK.
Fixes: 1ea47e01ad ("bpf: add support for bpf_call to interpreter")
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260506094714.419842-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of assigning the pci_device_id members using a list (which is
hard to read as you need to look at the order of the members in that
struct in parallel) use the PCI_VDEVICE() convenience macro to compact
the initialisation while improving readability.
Also drop trailing zeros that the compiler will care about then.
The change doesn't introduce binary changes to the compiled driver,
verified on both ARCH=x86 and ARCH=arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When CONFIG_SERIAL_QCOM_GENI_CONSOLE is disabled, the driver still
advertises the debug UART compatible strings ("qcom,geni-debug-uart"
and "qcom,sa8255p-geni-debug-uart") in its of_match table. This lets the
driver match and probe console UART DT nodes even though console
support is not built. As a result, the console port is never registered
with the UART core and uart_add_one_port() fails with -EINVAL.
Fix this by only including the debug UART compatible entries in the
match table when CONFIG_SERIAL_QCOM_GENI_CONSOLE is enabled, preventing
the driver from probing console UART nodes when console support is
absent.
Reviewed-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Signed-off-by: Aniket Randive <aniket.randive@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504101045.1084672-1-aniket.randive@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add comments to help clarify the provenance of the various hardcoded values
used in computing the ref clk.
Assisted-by: Gemini:Pro
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-10-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
txlen, to_send and tail variables are only used within the while() loop.
Move them to that scope to keep them closer to their usage and improve
readability.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-9-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If SPI is disabled, the max310x driver cannot be selected. Allow driver to
be selected if either I2C or SPI is set.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-8-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same basic code is duplicated for each of the four PLL multiplier
values, so simplify and streamline it. Doing so allows us to avoid
some unnecessary (fdiv * factor) multiplications for some fdiv values and
replace the second "if" statement with an "else if" and avoid a useless
comparison.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-5-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The baudrate used to compute the best error was changed from 115200 to
460800 in commit 35240ba26a ("tty: max310x: Fix invalid baudrate
divisors calculator"), but the comment was not updated, so fix it.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-4-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Having max310x_set_ref_clk() return an s32 as both an error code
and a frequency value is ambiguous. Fix by passing a pointer to the
frequency value that will then be updated, and simply return a status.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-3-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
besterr was defined as a signed type was to make sure that the first call
to max310x_update_best_err() would always set besterr. Also there is no
need for it to be a long. By changing its type to unsigned int and initial
value to UINT_MAX, max310x_update_best_err() can be simplified and be more
efficient while achieving the same initial result.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-2-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
max310x_set_ref_clk() returns a 32-bits clock value, so there is no need
to have parameters and intermediate values defined as long. Change
clock and freq types to int.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260417-max310x-2-v1-1-b424e105ecac@dimonoff.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a device has a minimum baud rate > 9600 bauds, and a new termios baud
rate of 0 (hang up) is requested, uart_get_baud_rate() will return 0.
Most drivers do not check this return value and call uart_update_timeout()
with this zero baud rate, which will trigger a "Division by zero in kernel"
fault:
stty -F /dev/ttySC0 0
Division by zero in kernel.
...
Fix by returning the larger of 9600 or min for the B0 case. This now
ensures that a non-zero baud rate is returned, and greatly simplifies the
code.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-6-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the clipping logic in uart_get_baud_rate() to improve code
readability.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum baud rate supported by this driver is 0, so even for the B0
case, uart_get_baud_rate() will return 9600, not zero. This check predates
commit 16ae2a877b ("serial: Fix crash if the minimum rate of the device
is > 9600 baud") and is no longer necessary so remove it.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The minimum baud rate supported by this driver is 300, so even for the B0
case, uart_get_baud_rate() will return 9600, not zero. This check predates
commit 16ae2a877b ("serial: Fix crash if the minimum rate of the device
is > 9600 baud") and is no longer necessary so remove it.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20260410152022.2146488-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When uart_flush_buffer() runs before the DMA completion IRQ is delivered,
the following race can occur (all steps serialized by uart_port_lock):
1. DMA starts: tx_remaining = N, kfifo contains N bytes
2. DMA completes in hardware; IRQ is pending but not yet delivered
3. uart_flush_buffer() acquires the port lock and calls kfifo_reset(),
making kfifo_len() = 0 while tx_remaining remains N
4. uart_flush_buffer() releases the port lock
5. DMA IRQ fires; handle_tx_dma() acquires the port lock and calls
uart_xmit_advance(uport, tx_remaining) on an empty kfifo
uart_xmit_advance() increments kfifo->out by tx_remaining. Since
kfifo_reset() already set both in and out to 0, out wraps past in,
causing kfifo_len() to return UART_XMIT_SIZE - tx_remaining. The next
start_tx_dma() call then submits a DMA transfer of stale buffer data.
Fix this by snapshotting kfifo_len() at the start of handle_tx_dma()
and skipping uart_xmit_advance() when fifo_len < tx_remaining, which
indicates the kfifo was reset by a preceding flush.
Fixes: 2aaa43c707 ("tty: serial: qcom-geni-serial: add support for serial engine DMA")
Cc: stable <stable@kernel.org>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506-serial-dma-stale-tx-buf-v1-1-e3ccb360d719@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpuart_start_rx_dma() allocates sport->rx_ring.buf with kzalloc() and
then maps a scatterlist via dma_map_sg(). On three subsequent error
paths the function returns directly without releasing those resources:
- when dma_map_sg() returns 0 (-EINVAL):
ring->buf is leaked.
- when dmaengine_slave_config() fails:
ring->buf and the DMA mapping are leaked.
- when dmaengine_prep_dma_cyclic() returns NULL:
ring->buf and the DMA mapping are leaked.
The sole cleanup path, lpuart_dma_rx_free(), is only reached when
lpuart_dma_rx_use is set, and the caller lpuart_rx_dma_startup() clears
that flag on failure of lpuart_start_rx_dma(). So these resources are
permanently leaked on every failure in this function. Repeated port
open/close or termios changes under error conditions will slowly consume
memory and leave stale streaming DMA mappings behind.
Fix it by introducing two error labels that unmap the scatterlist and
free the ring buffer as appropriate. While here, replace the misleading
-EFAULT (bad userspace pointer) returned when dmaengine_prep_dma_cyclic()
fails with the more accurate -ENOMEM, matching how other dmaengine users
in the tree treat this failure.
No functional change on the success path.
Fixes: 5887ad43ee ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx")
Cc: stable <stable@kernel.org>
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260420135903.2062024-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc_davinci_irq() returns early only when both host->cmd and
host->data are NULL:
if (host->cmd == NULL && host->data == NULL) {
...
return IRQ_NONE;
}
So we may legitimately reach the rest of the handler with
host->data == NULL (and therefore data == NULL). The DATDNE branch
already guards against this with an explicit "if (data != NULL)"
check, but the subsequent TOUTRD ("read data timeout") and
CRCWR/CRCRD ("data CRC error") branches dereference data
unconditionally:
if (qstatus & MMCST0_TOUTRD) {
data->error = -ETIMEDOUT; <-- NULL deref
...
davinci_abort_data(host, data);
}
if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) {
data->error = -EILSEQ; <-- NULL deref
...
}
If either bit is set in qstatus while host->data is NULL, the kernel
will crash inside the IRQ handler. smatch flags this:
drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we
previously assumed 'data' could be null (see line 914)
Gate both branches on a non-NULL data, matching the existing pattern
used by the DATDNE branch.
No functional change for callers where data is non-NULL, which is
the only case in which these branches did meaningful work before
this change.
Signed-off-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 7f991e3f9b ("nvme: add quirk
NVME_QUIRK_IGNORE_DEV_SUBNQN for 144d:a808")
The incorrect implementations of SUBNQN is a known issue in a massive number of
NVMe units. However, the warning "nvme nvmex: missing or invalid SUBNQN field."
is usually appropriate and will not affect performance or behavior etc. That is
because the support for SUBNQN is mandatory if the controller supports NVMe
revision 1.2.1 or greater, and it reported itself without a SUBNQN field which
breaks compliance with the specification. It should be not quirked by the Linux
Kernel.
Signed-off-by: Alan Cui <me@alancui.cc>
Signed-off-by: Keith Busch <kbusch@kernel.org>