On the Radxa ROCK3 Model A the I2C adapters related to the MIPI DSI
connector and the M.2/NGFF connector use the non-default pins.
Specify the correct pinctrl but leave the adapters disabled (as
they are supposed to be activated by overlays that describe the
external hardware).
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-3-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI DSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-2-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Radxa ROCK3 Model A features a voltage regulator that provides
a 3V3 supply to the MIPI CSI connector. Add this regulator to the
device tree of the board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Link: https://lore.kernel.org/r/20220712133204.2524942-1-michael.riesch@wolfvision.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The sequence of sections is a bit confusing here:
* we list the mux locking scheme for existing drivers before introducing
what mux locking schemes are
* we list the caveats for each locking scheme (which are tricky) before
the example of the simple use case
Restructure it entirely with the following logic:
* Intro ("I2C muxes and complex topologies")
* Locking
- mux-locked
- example
- caveats
- parent-locked
- example
- caveats
* Complex examples
* Mux type of existing device drivers
While there, also apply some other improvements:
* convert the caveat list from a table (with only one column carrying
content) to a bullet list.
* add a small introductory text to bridge the gap from listing the use
cases to telling about the hardware components to handle them and then
the device drivers that implement those.
* make empty lines usage more uniform
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"Etc" here was never meant to be a heading, it became one while converting
to ReST.
It would be easy to just convert it to plain text, but rather remove it and
add an introductory text before the list that conveys the same meaning but
with a better reading flow.
Fixes: ccf988b66d ("docs: i2c: convert to ReST and add to driver-api bookset")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
"intension" should have probably been "intention", however "intent" seems
even better.
Reported-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
While working on a GRUB patch to support PCI-serial, a number of
cleanups were suggested that apply to the code I took inspiration from.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/YwdeyCEtW+wa+QhH@worktop.programming.kicks-ass.net
Move display watermark related members under drm_i915_private display
sub-struct.
It's a bit arbitrary when to define a named struct for grouping, but
clearly intel_wm is big enough to warrant a separate definition.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b991dd25f8f539746c475d417691e0816ff6b24a.1661346845.git.jani.nikula@intel.com
The rc code is 0 at the error path "status & CC2520_STATUS_TX_UNDERFLOW".
Assign rc code with '-EINVAL' at this error path to fix it.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Link: https://lore.kernel.org/r/20220829071259.18330-1-liqiong@nfschina.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
coordinator, as for know we don't have this information we consider we
are not the PAN coordinator.
There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.
Cc: stable@vger.kernel.org
Fixes: ae531b9475 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
- Remove superfluous interrupt-names from imx8mq-tqma8mq RTC device to
silence dtbs_check warning.
- A few Verdin board fixes on CAN clock frequency, mcp251xfd interrupt,
atmel_mxt_ts reset polarity and USB PHY.
- Remove duplicated node and fix spi-flash compatible for
imx6qdl-kontron-samx6i.
- A couple of i.MX8M Plus DHCOM fixes from Marek Vasut on ECSPI1 pinmux
and I2C5 GPIO assignment.
- A couple of Venice fixes on SAI2 pin settings and phy-mode.
- Drop in-band autoneg for 2500base-x phy-mode on ls1028a-qds-65bb
board.
- Revert the power device name setting change from imx8m-blk-ctrl
driver, as it causes issue for sysfs cleanup path.
- Fix gpcv2 driver to assert reset before ungating clock.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMEijkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6LWQf/S5xgsb6ICveoaBrFyBvZv2dZvyqW
eAoeQUZDdQjO3mkUECOqjTYcCeAgnFcIb7vfbSx8VNTz+QCDixaziz1P4Tjjtj+j
TMtxo1CIeEcMkOnyOMUqZEyCLi+vAdnZUASzjCzuDC+6duAJXkhn1/cjRdaTotlA
yKJMZeJjmI1ChfTrSdiYv/IFmW+5s/ic8AGEiA1ngZiztftfrY1NDPhhg4RsWjds
borwErGj5wemPKxsXGU40AJmYQ3vHvZZ2LxG9vnxkrcKG2E6TWijKG3lYakvZTci
ny5c5YgHByGfZN8Ck3+PlVYHXk0asrRaspgaQgTlGraWsNFjFbfCitPQ8A==
=O/u2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PXZt
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.0:
- Remove superfluous interrupt-names from imx8mq-tqma8mq RTC device to
silence dtbs_check warning.
- A few Verdin board fixes on CAN clock frequency, mcp251xfd interrupt,
atmel_mxt_ts reset polarity and USB PHY.
- Remove duplicated node and fix spi-flash compatible for
imx6qdl-kontron-samx6i.
- A couple of i.MX8M Plus DHCOM fixes from Marek Vasut on ECSPI1 pinmux
and I2C5 GPIO assignment.
- A couple of Venice fixes on SAI2 pin settings and phy-mode.
- Drop in-band autoneg for 2500base-x phy-mode on ls1028a-qds-65bb
board.
- Revert the power device name setting change from imx8m-blk-ctrl
driver, as it causes issue for sysfs cleanup path.
- Fix gpcv2 driver to assert reset before ungating clock.
* tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible
ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node
ARM: dts: imx6qdl-vicut1.dtsi: Fix node name backlight_led
arm64: dts: imx8mq-tqma8mq: Remove superfluous interrupt-names
arm64: dts: imx8mp: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM
arm64: dts: imx8mp-venice-gw74xx: fix sai2 pin settings
arm64: dts: imx8mm-verdin: use level interrupt for mcp251xfd
arm64: dts: imx8mm-verdin: update CAN clock to 40MHz
Revert "soc: imx: imx8m-blk-ctrl: set power device name"
Link: https://lore.kernel.org/r/20220823092631.GV149610@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 788961462f ("ARM: psci: cpuidle: Enable PSCI CPUidle
driver") the generic ARM cpuidle driver probe no longer worked on
ARM64. It was however left enabled with the driver failing to probe
successfully. However the commit 51280acad8 ("cpuidle: cpuidle-arm:
remove arm64 support") removed the Kconfig option so that it is no
longer enabled for arm64 platforms.
Drop the disabled/unavailable ARM_CPUIDLE from the defconfig.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220822121604.2213778-1-sudeep.holla@arm.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two updates for the MAINTAINERS file from Conor Dooley.
* polarfire/fixes:
MAINTAINERS: add the Polarfire SoC's i2c driver
MAINTAINERS: add PolarFire SoC dt bindings
According to https://www.kernel.org/doc/html/latest/timers/no_hz.html,
CONFIG_NO_HZ=y should be replaced by CONFIG_NO_HZ_IDLE=y for newer
kernels, so let's reflect that in the 32-bit ARM defconfigs.
Signed-off-by: Stefan Hansson <newbie13xd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> # Samsung
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220825162034.5901-1-newbie13xd@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I have continued the cleanup of the multi_*_defconfig files, and
reordered the other files according to the 'make savedefconfig'
output as before.
Since a third of the defconfig files are for machines that
are now marked as unused, I skipped those files. There are still
a few things that get removed by 'make savedefconfig' as they
now get selected by some driver:
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SND_AUDIO_GRAPH_CARD=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_TEGRA20_APB_DMA=y
I think for those we should follow up with patches to remove the
'select' statements.
* arm/defconfig-cleanup:
ARM: defconfig: fix CONFIG_SND_SOC_AC97_CODEC name
ARM: defconfig: drop CONFIG_MICROCHIP_PIT64B
ARM: defconfig: drop CONFIG_USB_FSL_USB2
ARM: defconfig: drop CONFIG_SND_SOC_FSL_SAI
ARM: defconfig: drop CONFIG_PTP_1588_CLOCK=y
ARM: defconfig: drop CONFIG_DRM_RCAR_LVDS
ARM: defconfig: drop CONFIG_SERIAL_OMAP references
ARM: defconfig: drop CONFIG_NET_VENDOR_ASIX=y
ARM: defconfig: clean up multi_v4t and multi_v5 configs
ARM: defconfig: reorder defconfig files
The CONFIG_SND_SOC_AC97 symbol was recently enabled but does not
actually exist. From the patch description, I assume that this
was meant to be CONFIG_SND_SOC_AC97_CODEC, which is used in
imx_v6_v7_defconfig.
Fixes: 2cc1cd26e9 ("ARM: configs: Enable ASoC AC'97 glue")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now default-enabled when CONFIG_SOC_SAMA7 is
used, so the defconfig entry can be dropped.
Fixes: f611af4c3b ("ARM: at91: Kconfig: implement PIT64B selection")
Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
USB_FSL_USB2 is no longer available for Arm platforms and
was replaced by the chipidea driver.
Fixes: a390bef7db ("usb: gadget: fsl_mxc_udc: Remove the driver")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is selected by CONFIG_SND_SOC_FSL_ASOC_CARD=m, so the
extra line is redundant.
Fixes: 212e3b6b87 ("ARM: configs: Enable more audio support for i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PTP support is now enabled by default for configurations with
ethernet support, so drop the redundant entries in defconfig
files.
Fixes: e5f3155267 ("ethernet: fix PTP_1588_CLOCK dependencies")
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is now a hidden symbol, so just drop the defconfig line.
Fixes: 42d95d1b3a ("drm/rcar: stop using 'imply' for dependencies")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This driver is mutually exclusive with the new 8250_OMAP
driver, so 'make defconfig' turns it off already. Drop
the reference now.
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Fixes: f98d45145e ("ARM: multi_v7_defconfig: Enable 8250-omap serial driver and use it by default")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This option is 'default y' and has always been this way, the
line was added in error.
Fixes: dfe21dcaba ("ARM: defconfig: Enable ax88796c driver for Exynos boards")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Integrator now selects the regulators and versatile selects the
reset driver, so the correspondig options can be dropped from
the defconfig files.
Fixes: d2854bbe5f ("ARM: integrator: Add some Kconfig selections")
Fixes: 1c6e288da6 ("ARM: versatile: move restart to the device tree")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allow specifying the xfrm interface if_id and link as part of a route
metadata using the lwtunnel infrastructure.
This allows for example using a single xfrm interface in collect_md
mode as the target of multiple routes each specifying a different if_id.
With the appropriate changes to iproute2, considering an xfrm device
ipsec1 in collect_md mode one can for example add a route specifying
an if_id like so:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1
In which case traffic routed to the device via this route would use
if_id in the xfrm interface policy lookup.
Or in the context of vrf, one can also specify the "link" property:
ip route add <SUBNET> dev ipsec1 encap xfrm if_id 1 link_dev eth15
Note: LWT_XFRM_LINK uses NLA_U32 similar to IFLA_XFRM_LINK even though
internally "link" is signed. This is consistent with other _LINK
attributes in other devices as well as in bpf and should not have an
effect as device indexes can't be negative.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This commit adds support for 'collect_md' mode on xfrm interfaces.
Each net can have one collect_md device, created by providing the
IFLA_XFRM_COLLECT_METADATA flag at creation. This device cannot be
altered and has no if_id or link device attributes.
On transmit to this device, the if_id is fetched from the attached dst
metadata on the skb. If exists, the link property is also fetched from
the metadata. The dst metadata type used is METADATA_XFRM which holds
these properties.
On the receive side, xfrmi_rcv_cb() populates a dst metadata for each
packet received and attaches it to the skb. The if_id used in this case is
fetched from the xfrm state, and the link is fetched from the incoming
device. This information can later be used by upper layers such as tc,
ebpf, and ip rules.
Because the skb is scrubed in xfrmi_rcv_cb(), the attachment of the dst
metadata is postponed until after scrubing. Similarly, xfrm_input() is
adapted to avoid dropping metadata dsts by only dropping 'valid'
(skb_valid_dst(skb) == true) dsts.
Policy matching on packets arriving from collect_md xfrmi devices is
done by using the xfrm state existing in the skb's sec_path.
The xfrm_if_cb.decode_cb() interface implemented by xfrmi_decode_session()
is changed to keep the details of the if_id extraction tucked away
in xfrm_interface.c.
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In another long-overdue cleanup, add a display sub-struct to
drm_i915_private, and start moving display related members there. Start
with display funcs that need a rename anyway to not collide with the new
display member.
Add a new header under display/ for defining struct intel_display.
Rename struct drm_i915_display_funcs to intel_display_funcs while at it.
v2:
- Fix multi-line comment style (Arun)
- Use display as the member name
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d44cae096b664f7015f8c797d6dfd4964226d4f8.1661346845.git.jani.nikula@intel.com
The debug-info and can subystem options have moved around in the
'savedefconfig' output, so fix these up to reduce the clutter
from the savedefconfig command.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>