pwrseq_sd8787 is forced to be built as a module if its dependencies are.
That's unnecessary, it's perfectly fine for it to be built-in even
though the wireless drivers that need it are modules.
Relax the depends definition in Kconfig accordingly.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Matt Ranostay <matt@ranostay.consulting>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/8bb3d7c3a36985e030ba40e853c57578de8fb303.1673866725.git.lukas@wunner.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently make dtbs_check shows lots of errors because imx*.dtsi does
not use single compatibles but combinations of them.
Add fallbacks for imx6sll/ull which are useful for U-Boot.
This will significantly reduce noise on make dtbs_check.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230115195212.2530087-1-andreas@kemnade.info
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SD Card/MMC interface on the Renesas RZ/V2M SoC uses 4 clocks, like
on RZ/G2L SoCs.
The current description specifies 3 clocks, like on R-Car Gen3, which
will lead to "make dtbs_check" failures:
arch/arm64/boot/dts/renesas/r9a09g011-v2mevk2.dtb: mmc@85000000: clocks: [[3, 1, 18], [3, 1, 20], [3, 1, 19], [3, 1, 17]] is too long
From schema: Documentation/devicetree/bindings/mmc/renesas,sdhi.yaml
Fixes: c8dbdf2a1044951b ("dt-bindings: mmc: renesas,sdhi: Document RZ/V2M support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/054c9f4dbb0bb1525f780d1e85c724436465c20c.1673270716.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit enables SDHCI Host V4 support on Bluefield-3 SoC to be
consistent with the default setting in firmware(UEFI).
Reviewed-by: David Woods <davwoods@nvidia.com>
Signed-off-by: Liming Sun <limings@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/990885f566c32ac8e6888ad6b434fb70d1a5d7af.1673460632.git.limings@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that it is no longer used, remove SDHCI_QUIRK_MISSING_CAPS.
Note, from now on, __sdhci_read_caps() should be used to provide missing
capability flags.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230113110011.129835-7-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDHCI_QUIRK_MISSING_CAPS is not needed because __sdhci_read_caps() can be
called instead.
In preparation to get rid of SDHCI_QUIRK_MISSING_CAPS, replace
SDHCI_QUIRK_MISSING_CAPS with __sdhci_read_caps().
__sdhci_read_caps() is also called from sdhci_setup_host() via
sdhci_read_caps(), however only the first call to __sdhci_read_caps() does
anything because after that host->read_caps has been set to true.
Note, __sdhci_read_caps() does more than just set host->caps, such as do a
reset, so calling __sdhci_read_caps() earlier could have unforeseen
side-effects. However the code flow has been reviewed with that in mind.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20230113110011.129835-6-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDHCI_QUIRK_MISSING_CAPS is not needed because sdhci_read_caps() can be
called instead.
In preparation to get rid of SDHCI_QUIRK_MISSING_CAPS, replace
SDHCI_QUIRK_MISSING_CAPS with sdhci_read_caps().
__sdhci_read_caps() is also called from sdhci_setup_host() via
sdhci_read_caps(), however only the first call to __sdhci_read_caps() does
anything because after that host->read_caps has been set to true.
Note, __sdhci_read_caps() does more than just set host->caps, such as do a
reset, so calling __sdhci_read_caps() earlier could have unforeseen
side-effects. However the code flow has been reviewed with that in mind.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20230113110011.129835-5-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDHCI_QUIRK_MISSING_CAPS is not needed because sdhci_read_caps() can be
called instead.
In preparation to get rid of SDHCI_QUIRK_MISSING_CAPS, replace
SDHCI_QUIRK_MISSING_CAPS with sdhci_read_caps().
__sdhci_read_caps() is also called from sdhci_setup_host() via
sdhci_read_caps(), however only the first call to __sdhci_read_caps() does
anything because after that host->read_caps has been set to true.
Note, __sdhci_read_caps() does more than just set host->caps, such as do a
reset, so calling __sdhci_read_caps() earlier could have unforeseen
side-effects. However the code flow has been reviewed with that in mind.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20230113110011.129835-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDHCI_QUIRK_MISSING_CAPS is not needed because sdhci_read_caps() can be
called instead.
In preparation to get rid of SDHCI_QUIRK_MISSING_CAPS, replace
SDHCI_QUIRK_MISSING_CAPS with sdhci_read_caps().
__sdhci_read_caps() is also called from sdhci_setup_host() via
sdhci_read_caps(), however only the first call to __sdhci_read_caps() does
anything because after that host->read_caps has been set to true.
Note, __sdhci_read_caps() does more than just set host->caps, such as do a
reset, so calling __sdhci_read_caps() earlier could have unforeseen
side-effects. However the code flow has been reviewed with that in mind.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230113110011.129835-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDHCI_QUIRK_MISSING_CAPS is not needed because __sdhci_read_caps() can be
called instead.
In preparation to get rid of SDHCI_QUIRK_MISSING_CAPS, replace
SDHCI_QUIRK_MISSING_CAPS with __sdhci_read_caps() for Ricoh SDHCI
controller.
__sdhci_read_caps() is also called from sdhci_setup_host() via
sdhci_read_caps(), however only the first call to __sdhci_read_caps() does
anything because after that host->read_caps has been set to true.
Note, __sdhci_read_caps() does more than just set host->caps, such as do a
reset, so calling __sdhci_read_caps() earlier could have unforeseen
side-effects. However the code flow has been reviewed with that in mind.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230113110011.129835-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
i.MX50 eSDHC is compatible with i.MX53. i.MX7D uSDHC is compatible with
i.MX6SL. So update for them.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221223030347.17093-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
USDHC IP has one limitation: the tuning circuit can't handle the async
sdio device interrupt correctly. When sdio device use 4 data lines,
async sdio interrupt will use the shared DAT[1], if enable auto tuning
circuit to check these 4 data lines, include the DAT[1], this circuit
will detect this interrupt, take this as data on DAT[1], and adjust the
delay cell wrongly, finally will cause the DATA/CMD CRC error.
So for SDIO device, only enable DAT[0] and CMD line for auto tuning.
To distinguish the card type during card init, involve init_card().
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221223025022.1893102-3-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Clear auto tuning bit when reset tuning, and enable auto tuning
only after tuning done successfully for both standard tuning and
manual tuning.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221223025022.1893102-2-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDHI/eMMC IPs found with the RZ/V2M (a.k.a. r9a09g011), are
very similar to the ones found in R-Car Gen3, but they are not
exactly the same, and as a result need an SoC specific compatible
string for fine tuning driver support.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221213230129.549968-4-fabrizio.castro.jz@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document support for the SD Card/MMC interface on the Renesas
RZ/V2M (a.k.a. r9a09g011) SoC.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221213230129.549968-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
nfsd_file_cache_purge is called when the server is shutting down, in
which case, tearing things down is generally fine, but it also gets
called when the exports cache is flushed.
Instead of walking the cache and freeing everything unconditionally,
handle it the same as when we have a notification of conflicting access.
Fixes: ac3a2585f0 ("nfsd: rework refcounting in filecache")
Reported-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-by: Torkil Svensgaard <torkil@drcmr.dk>
Reported-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Use devm_clk_get_enabled() to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need the USB fixes in here and this resolves merge conflicts as
reported in linux-next in the following files:
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace open coded fwnode_device_is_compatible() in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1d2e9b67b0 ("ARM: 9265/1: pass -march= only to compiler") added
a __thumb2__ define to ASFLAGS to avoid build errors in the crypto code,
which relies on __thumb2__ for preprocessing. Commit 59e2cf8d21 ("ARM:
9275/1: Drop '-mthumb' from AFLAGS_ISA") followed up on this by removing
-mthumb from AFLAGS so that __thumb2__ would not be defined when the
default target was ARMv7 or newer.
Unfortunately, the second commit's fix assumes that the toolchain
defaults to -mno-thumb / -marm, which is not the case for Debian's
arm-linux-gnueabihf target, which defaults to -mthumb:
$ echo | arm-linux-gnueabihf-gcc -dM -E - | grep __thumb
#define __thumb2__ 1
#define __thumb__ 1
This target is used by several CI systems, which will still see
redefined macro warnings, despite '-mthumb' not being present in the
flags:
<command-line>: warning: "__thumb2__" redefined
<built-in>: note: this is the location of the previous definition
Remove the global AFLAGS __thumb2__ define and move it to the crypto
folder where it is required by the imported OpenSSL algorithms; the rest
of the kernel should use the internal CONFIG_THUMB2_KERNEL symbol to
know whether or not Thumb2 is being used or not. Be sure that __thumb2__
is undefined first so that there are no macro redefinition warnings.
Link: https://github.com/ClangBuiltLinux/linux/issues/1772
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Fixes: 59e2cf8d21 ("ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA")
Fixes: 1d2e9b67b0 ("ARM: 9265/1: pass -march= only to compiler")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
We need the staging fixes in here, and it resolves a merge conflict in:
drivers/staging/vc04_services/include/linux/raspberrypi/vchiq.h
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we're using ring provided buffers with multishot receive, and we end
up doing an io-wq based issue at some points that also needs to select
a buffer, we'll lose the initially assigned buffer group as
io_ring_buffer_select() correctly clears the buffer group list as the
issue isn't serialized by the ctx uring_lock. This is fine for normal
receives as the request puts the buffer and finishes, but for multishot,
we will re-arm and do further receives. On the next trigger for this
multishot receive, the receive will try and pick from a buffer group
whose value is the same as the buffer ID of the las receive. That is
obviously incorrect, and will result in a premature -ENOUFS error for
the receive even if we had available buffers in the correct group.
Cache the buffer group value at prep time, so we can restore it for
future receives. This only needs doing for the above mentioned case, but
just do it by default to keep it easier to read.
Cc: stable@vger.kernel.org
Fixes: b3fdea6ecb ("io_uring: multishot recv")
Fixes: 9bb66906f2 ("io_uring: support multishot in recvmsg")
Cc: Dylan Yudaken <dylany@meta.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Simple framebuffers can be set up in system memory, which cannot be
requested and/or I/O remapped using the I/O resource helpers. Add a
separate code path that obtains system memory framebuffers from the
reserved memory region referenced in the memory-region property.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-6-thierry.reding@gmail.com
The majority of the driver already uses struct iosys_map to encapsulate
accesses to I/O remapped vs. system memory. Accesses via the screen base
pointer still use __iomem annotations, which can lead to inconsistencies
and conflicts with subsequent patches.
Convert the screen base to a struct iosys_map as well for consistency
and to avoid these issues.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120173103.4002342-5-thierry.reding@gmail.com
Clear the class private pointer if __class_register() fails for it, so
as to allow its users to verify that the class is usable by checking
the value of that pointer.
For consistency, clear that pointer before freeing the object pointed
to by it in class_release().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/4463268.LvFx2qVVIh@kreacher
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need for the probe-component to be part of the PCM component
list as it does not make use of ASoC-topology and does not participate
in creating any PCM streams.
To achieve that, remove probe() and remove() functions.
Fixes: ed914a2a45 ("ASoC: Intel: avs: Data probing soc-component")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230123122144.1356890-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check for SPF readiness in prm driver probe to avoid race conditions
during ADSP pil loading.
This patch is to avoid, sending requests to ADSP before it's
power domains are up and ready.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Ratna Deepthi Kudaravalli <rkudarav@qti.qualcomm.com>
Link: https://lore.kernel.org/r/1673508617-27410-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This model requires an additional detection quirk to enable the
internal microphone - BIOS doesn't seem to support AcpDmicConnected
(nothing in acpidump output).
Signed-off-by: fengwk <fengwk94@gmail.com>
Link: https://lore.kernel.org/r/Y8wmCutc74j/tyHP@arch
Signed-off-by: Mark Brown <broonie@kernel.org>
Vladimir Oltean says:
====================
ENETC MAC Merge cleanup
This is a preparatory patch set for MAC Merge layer support in enetc via
ethtool. It does the following:
- consolidates a software lockstep register write procedure for the pMAC
- detects per-port frame preemption capability and only writes pMAC
registers if a pMAC exists
- stops enabling the pMAC by default
Additionally, I noticed some build warnings in the driver which are new
in this kernel version, so patch 1/6 fixes those.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The pMAC (ENETC_PFPMR_PMACE) is probably unconditionally enabled in the
enetc driver to allow RX of preemptible packets and not see them as
error frames. I don't know why TX preemption (ENETC_MMCSR_ME) is enabled
though. With no way to say which traffic classes are preemptible (all
are express by default), no preemptible frames would be transmitted
anyway.
Lastly, it may have been believed that the register write lock-step mode
(now deleted) needed the pMAC to be enabled at all times. I don't know
if that's true. However, I've checked that driver writes to PM1
registers do propagate through to the ENETC IP even when the pMAC is
disabled.
With such incomplete support for frame preemption, it's best to just
remove whatever exists right now and come with something more coherent
later.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the enetc driver duplicates its writes to the PM0 registers
also to PM1, but it doesn't do this consistently - for example we write
to ENETC_PM0_MAXFRM but not to ENETC_PM1_MAXFRM.
Create enetc_port_mac_wr() which writes both the PM0 and PM1 register
with the same value (if frame preemption is supported on this port).
Also create enetc_port_mac_rd() which reads from PM0 - the assumption
being that PM1 contains just the same value.
This will be necessary when we enable the MAC Merge layer properly, and
the pMAC becomes operational.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MWLM bit (MAC write lock-step mode) allows register writes to the
pMAC to be auto-performed whenever the corresponding eMAC register is
written by the driver. This allows their configuration to remain
in sync.
The driver has set this bit since the initial commit, but it doesn't do
anything, since the hardware feature doesn't work (and the bit has been
removed from more recent versions of the documentation).
The driver does attempt, more or less, to keep those MAC registers in
sync by writing the same value once to e.g. ENETC_PM0_CMD_CFG (eMAC) and
once to ENETC_PM1_CMD_CFG (pMAC). Because the lockstep feature doesn't
work, that's what it will stick to.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preliminary patch which replaces the hardcoded 0x1000 present
in other PM1 (port MAC 1, aka pMAC) register definitions, which is an
offset to the PM0 (port MAC 0, aka eMAC) equivalent register.
This definition will be used in more places by future code.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to other TSN features, query the Station Interface capability
register to see whether preemption is supported on this port or not.
On LS1028A, preemption is available on ports 0 and 2, but not on 1
and 3.
This will allow us in the future to write the pMAC registers only on the
ENETC ports where a pMAC actually exists.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The build system is complaining about the following:
enetc.o is added to multiple modules: fsl-enetc fsl-enetc-vf
enetc_cbdr.o is added to multiple modules: fsl-enetc fsl-enetc-vf
enetc_ethtool.o is added to multiple modules: fsl-enetc fsl-enetc-vf
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The perf test named “build id cache operations” skips with below error
on some distros:
<<>>
78: build id cache operations :
test child forked, pid 111101
WARNING: wine not found. PE binaries will not be run.
test binaries: /tmp/perf.ex.SHA1.PKz /tmp/perf.ex.MD5.Gt3 ./tests/shell/../pe-file.exe
DEBUGINFOD_URLS=
Adding 4abd406f041feb4f10ecde3fc30fd0639e1a91cb /tmp/perf.ex.SHA1.PKz: Ok
build id: 4abd406f041feb4f10ecde3fc30fd0639e1a91cb
./tests/shell/buildid.sh: 69: ./tests/shell/buildid.sh: Bad substitution
test child finished with -2
build id cache operations: Skip
<<>>
The test script "tests/shell/buildid.sh" uses some of the string
substitution ways which are supported in bash, but not in "sh" or other
shells. Above error on line number 69 that reports "Bad substitution"
is:
<<>>
link=${build_id_dir}/.build-id/${id:0:2}/${id:2}
<<>>
Here the way of getting first two characters from id ie, ${id:0:2} and
similarly expressions like ${id:2} is not recognised in "sh". So the
line errors and instead of hitting failure, the test gets skipped as
shown in logs. So the syntax issue causes test not to be executed in
such cases. Similarly usage : "${@: -1}" [ to pick last argument passed
to a function] in “test_record” doesn’t work in all distros.
Fix this by using alternative way with shell substitution to pick
required characters from the string. Also fix the usage of “${@: -1}” to
work in all cases.
Another usage in “test_record” is:
<<>>
${perf} record --buildid-all -o ${data} $@ &> ${log}
<<>>
This causes the 'perf record' to start in background and Results in the
data file not being created by the time "check" function is invoked.
Below log shows 'perf record' result getting displayed after the call to
"check" function.
<<>>
running: perf record /tmp/perf.ex.SHA1.EAU
build id: 4abd406f041feb4f10ecde3fc30fd0639e1a91cb
link: /tmp/perf.debug.mLT/.build-id/4a/bd406f041feb4f10ecde3fc30fd0639e1a91cb
failed: link /tmp/perf.debug.mLT/.build-id/4a/bd406f041feb4f10ecde3fc30fd0639e1a91cb does not exist
test child finished with -1
build id cache operations: FAILED!
root@machine:~/athira/linux/tools/perf# Couldn't synthesize bpf events.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.010 MB /tmp/perf.data.bFF ]
<<>>
Fix this by redirecting output instead of using “&” which starts the
command in background.
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230119142719.32628-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix various spelling errors as reported by Debian's lintian tool.
"amount of times" -> "number of times"
ocurrence -> occurrence
upto -> up to
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230122122034.48020-1-didi.debian@cknow.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BPF filtering tests can sometime fail. Running the test in verbose mode
shows the following:
$ sudo perf test 42
42: BPF filter :
42.1: Basic BPF filtering : FAILED!
42.2: BPF pinning : Skip
42.3: BPF prologue generation : Skip
$ perf --version
perf version 4.18.0-425.3.1.el8.ppc64le
$ sudo perf test -v 42
42: BPF filter :
42.1: Basic BPF filtering :
--- start ---
test child forked, pid 711060
...
bpf: config 'func=do_epoll_wait' is ok
Looking at the vmlinux_path (8 entries long)
Using /usr/lib/debug/lib/modules/4.18.0-425.3.1.el8.ppc64le/vmlinux for symbols
Open Debuginfo file: /usr/lib/debug/.build-id/81/56f5a07f92ccb62c5600ba0e4aacfb5f3a7534.debug
Try to find probe point from debuginfo.
Matched function: do_epoll_wait [4ef8cb0]
found inline addr: 0xc00000000061dbe4
Probe point found: __se_compat_sys_epoll_pwait+196
found inline addr: 0xc00000000061d9f4
Probe point found: __se_sys_epoll_pwait+196
found inline addr: 0xc00000000061d824
Probe point found: __se_sys_epoll_wait+36
Found 3 probe_trace_events.
Opening /sys/kernel/tracing//kprobe_events write=1
...
BPF filter result incorrect, expected 56, got 56 samples
test child finished with -1
---- end ----
BPF filter subtest 1: FAILED!
The statement above about the result being incorrect looks weird, and it
is due to that particular perf build missing commit 3e11300cdf
("perf test: Fix bpf test sample mismatch reporting"). In reality, due
to commit 4b04e0decd ("perf test: Fix basic bpf filtering test"),
perf expects there to be 56*3 samples.
However, the number of samples we receive is going to be dependent on
where the probes are installed, which is dependent on where
do_epoll_wait gets inlined. On s390x, it looks like probes at all the
inlined locations are hit. But, that is not the case on ppc64le.
Fix this by switching the test to instead use the syscall tracepoint.
This ensures that we will only ever install a single event enabling us
to reliably determine the sample count.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20230123083224.276404-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
