We were seeing weird errors when we were testing our btrfs backports
before we had the incorrect level check fix. These errors appeared to
be improper error handling, but error injection testing uncovered that
the errors were a result of corruption that occurred from improper error
handling during snapshot delete.
With snapshot delete if we encounter any errors during walk_down or
walk_up we'll simply return an error, we won't abort the transaction.
This is problematic because we will be dropping references for nodes and
leaves along the way, and if we fail in the middle we will leave the
file system corrupt because we don't know where we left off in the drop.
Fix this by making sure we abort if we hit any errors during the walk
down or walk up operations, as we have no idea what operations could
have been left half done at this point.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can get errors in walk_down_proc as we try and lookup extent info for
the snapshot dropping to act on. However if we get an error we simply
return 1 which indicates we're done with walking down, which will lead
us to improperly continue with the snapshot drop with the incorrect
information. Instead break if we get any error from walk_down_proc or
do_walk_down, and handle the case of ret == 1 by returning 0, otherwise
return the ret value that we have.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we mount the file system we do something like this:
while (1) {
lookup fs roots;
for (i = 0; i < num_roots; i++) {
ret = btrfs_orphan_cleanup(roots[i]);
if (ret)
break;
btrfs_put_root(roots[i]);
}
}
for (; i < num_roots; i++)
btrfs_put_root(roots[i]);
As you can see if we break in that inner loop we just go back to the
outer loop and lose the fact that we have to drop references on the
remaining roots we looked up. Fix this by making an out label and
jumping to that on error so we don't leak a reference to the roots we
looked up.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We missed a couple of iput()s in the orphan cleanup failure paths, add
them so we don't get refcount errors. The iput needs to be done in the
check and not under a common label due to the way the code is
structured.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While investigating a problem with error injection I tripped over
curious behavior in the node/leaf splitting code. If we get an EIO when
trying to read either the left or right leaf/node for splitting we'll
simply treat the node as if it were full and continue on. The end
result of this isn't too bad, we simply end up allocating a block when
we may have pushed items into the adjacent blocks.
However this does essentially allow us to continue to modify a file
system that we've gotten errors on, either from a bad disk or csum
mismatch or other corruption. This isn't particularly safe, so instead
handle these btrfs_read_node_slot() usages differently. We allow you to
pass in any slot, the idea being that we save some code if the slot
number is outside of the range of the parent. This means we treat all
errors the same, when in reality we only want to ignore -ENOENT.
Fix this by changing how we call btrfs_read_node_slot(), which is to
only call it for slots we know are valid. This way if we get an error
back from reading the block we can properly pass the error up the chain.
This was validated with the error injection testing I was doing.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_read_node_slot() we have a BUG_ON() that can be converted to an
ASSERT(), it's from an extent buffer and the level is validated at the
time it's read from disk.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While trying to track down a lost EIO problem I hit the following
assertion while doing my error injection testing
BTRFS warning (device nvme1n1): transaction 1609 (with 180224 dirty metadata bytes) is not committed
assertion failed: !found, in fs/btrfs/disk-io.c:4456
------------[ cut here ]------------
kernel BUG at fs/btrfs/messages.h:169!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 1445 Comm: mount Tainted: G W 6.2.0-rc5+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
RIP: 0010:btrfs_assertfail.constprop.0+0x18/0x1a
RSP: 0018:ffffb95fc3b0bc68 EFLAGS: 00010286
RAX: 0000000000000034 RBX: ffff9941c2ac2000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffb6741f7d RDI: 00000000ffffffff
RBP: ffff9941c2ac2428 R08: 0000000000000000 R09: ffffb95fc3b0bb38
R10: 0000000000000003 R11: ffffffffb71438a8 R12: ffff9941c2ac2428
R13: ffff9941c2ac2450 R14: ffff9941c2ac2450 R15: 000000000002c000
FS: 00007fcea2d07800(0000) GS:ffff9941fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f00cc7c83a8 CR3: 000000010c686000 CR4: 0000000000350ef0
Call Trace:
<TASK>
close_ctree+0x426/0x48f
btrfs_mount_root.cold+0x7e/0xee
? legacy_parse_param+0x2b/0x220
legacy_get_tree+0x2b/0x50
vfs_get_tree+0x29/0xc0
vfs_kern_mount.part.0+0x73/0xb0
btrfs_mount+0x11d/0x3d0
? legacy_parse_param+0x2b/0x220
legacy_get_tree+0x2b/0x50
vfs_get_tree+0x29/0xc0
path_mount+0x438/0xa40
__x64_sys_mount+0xe9/0x130
do_syscall_64+0x3e/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This is because the error injection did an EIO for the root inode lookup
and we simply jumped to closing the ctree. However because we didn't
mark the file system as having an error we skipped all of the broken
transaction cleanup stuff, and thus triggered this ASSERT(). Fix this
by calling btrfs_handle_fs_error() in this case so we have the error set
on the file system.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Take nss calculation into account since this function always wrongly
returns 0.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The vif->bss_conf.mcast_rate should be applied to multicast data frame
only.
Fixes: 182071cdd5 ("mt76: connac: move connac2_mac_write_txwi in mt76_connac module")
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If the chip reset worker is triggered during the remove process, the chip
DMA may not be properly pushed back to the idle state. This can lead to
corruption of the DMA flow due to the chip reset. Therefore, it is
necessary to stop the chip reset before the DMA is finalized.
To avoid resetting the chip after the reset worker is cancelled, use
__mt7921_mcu_drv_pmctrl() instead of mt7921_mcu_drv_pmctrl(). It is safe to
ignore the pm mutex because the pm worker and wake worker have already been
cancelled.
Fixes: 033ae79b38 ("mt76: mt7921: refactor init.c to be bus independent")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The hardware team has advised the driver that it is necessary to first put
WFDMA into an idle state before resetting the WFDMA. Otherwise, the WFDMA
may enter an unknown state where it cannot be polled with the right state
successfully. To ensure that the DMA can work properly while a stressful
cold reboot test was being made, we have reordered the programming sequence
in the driver based on the hardware team's guidance.
The patch would modify the WFDMA disabling flow from
"DMA reset -> disabling DMASHDL -> disabling WFDMA -> polling and waiting
until DMA idle" to "disabling WFDMA -> polling and waiting for DMA idle ->
disabling DMASHDL -> DMA reset.
Where he polling and waiting until WFDMA is idle is coordinated with the
operation of disabling WFDMA. Even while WFDMA is being disabled, it can
still handle Tx/Rx requests. The additional polling allows sufficient time
for WFDMA to process the last T/Rx request. When the idle state of WFDMA is
reached, it is a reliable indication that DMASHDL is also idle to ensure it
is safe to disable it and perform the DMA reset.
Fixes: 0a1059d0f0 ("mt76: mt7921: move mt7921_dma_reset in dma.c")
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Wang Zhao <wang.zhao@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
`mt7921u_dma_init` can only return zero or negative number according to its
definition. When it returns non-zero number, there exists an error and this
function should handle this error rather than return directly.
Fixes: 0d2afe09fa ("mt76: mt7921: add mt7921u driver")
Signed-off-by: Jiefeng Li <jiefeng_li@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mcu_uni_event and mcu_reg_event structs are shared between mt7921 and
mt7615 drivers, so move them in connac lib.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Host triggered and catastrophic event triggered firmware core dumping
for basic firmware issues triage, including state reporting, function
calltrace and MCU memory dump.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add testing points into debugfs to trigger firmware assert and enable
full system recovery. Also rename knob "fw_ser" to a clear-cut name
"sys_recovery".
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add mt7996_reset() and refactor mt7996_mac_reset_work() to support
full system recovery.
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce p2p-go/p2p-client support to mt7921 driver
CONNECTION_P2P_GC/GO is not supported with the current firmware
so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to
use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go
respectively to make it work.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
-----BEGIN PGP SIGNATURE-----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=8/Bb
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=maaU
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v6.4
The main and only new addition this time around is the support for
unidirectional mailbox channels. SCMI communicates between the agent
and the platform using one bidirectional 'a2p' channel used by the agent
to send SCMI commands and synchronously receive the related replies, and
an optional 'p2a' unidirectional channel used to asynchronously receive
delayed responses and notifications emitted from the platform.
In order to support platforms that support only unidirectional mailbox
hardware channels, the existing bindings are extended to support the
same. Both bidirectional and unidirectional channels support for the
SCMI mailbox can coexist. The correct and effective combination of
defined 'mboxes' and 'shmem' descriptors determines the type of the
mailbox channel.
This also contains a fix for the transfers allocation on Rx channel
especially when the base protocol doesn't use Rx channel while some
of the protocols can have dedicated Rx channels.
* tag 'scmi-updates-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add support for unidirectional mailbox channels
dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
firmware: arm_scmi: Fix xfers allocation on Rx channel
firmware: arm_scmi: Use the bitmap API to allocate bitmaps
firmware: arm_scmi: Fix device node validation for mailbox transport
firmware: arm_scmi: Fix raw coexistence mode behaviour on failure path
firmware: arm_scmi: Remove duplicate include header inclusion
firmware: arm_scmi: Return a literal instead of a variable
firmware: arm_scmi: Clean up a return statement in scmi_probe
Link: https://lore.kernel.org/r/20230417145743.1904318-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:266:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit_v2[0]’ [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:263:25: warning: array subscript 0 is outside array bounds of ‘struct mt7921_asar_dyn_limit[0]’ [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:223:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit_v2[0]’ [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:220:28: warning: array subscript <unknown> is outside array bounds of ‘struct mt7921_asar_geo_limit[0]’ [-Warray-bounds=]
drivers/net/wireless/mediatek/mt76/mt7921/acpi_sar.c:334:37: warning: array subscript i is outside array bounds of ‘u8[0]’ {aka ‘unsigned char[]’} [-Warray-bounds=]
Notice that the DECLARE_FLEX_ARRAY() helper allows for flexible-array
members in unions.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/272
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Zero-length arrays are deprecated [1] and have to be replaced by C99
flexible-array members.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help to make progress towards globally enabling
-fstrict-flex-arrays=3 [2]
Link: https://github.com/KSPP/linux/issues/78 [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Issue: Though the Netgear AXE3000 (A8000) is based on the mt7921
chipset because of the unique USB VID:PID combination this device
does not initialize/register. Thus making it not plug and play.
Fix: Adds support for the Netgear AXE3000 (A8000) based on the Mediatek
mt7921au chipset. The method of action is adding the USD VID/PID
pair to the mt7921u_device_table[] array.
Notes: A retail sample of the Netgear AXE3000 (A8000) yeilds the following
from lsusb D 0846:9060 NetGear, Inc. Wireless_Device. This pair
0846:9060 VID:PID has been reported by other users on Github.
Signed-off-by: Reese Russell <git@qrsnap.io>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Just a cosmetic patch to drop redundant prefix for txpower ouput text.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76 scan command only support 64 channels currently. If the
channel count is larger than 64(for 2+5+6GHz), some channels will
not be scanned. Hence change the scan type to full channel scan
in case of the command cannot include proper list for chip.
Fixes: 399090ef96 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module")
Reported-by: Ben Greear <greearb@candelatech.com>
Tested-by: Isaac Konikoff <konikofi@candelatech.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In system warm reboot scene, due to the polling timeout(now 1000us)
is too short to wait dma idle in time, it may make driver probe fail
with error code -ETIMEDOUT. Meanwhile, we also found the dma may take
around 70ms to enter idle state. Change the polling idle timeout to
100ms to avoid the probabilistic probe fail.
Tested pass with 5000 times warm reboot on x86 platform.
[4.477496] pci 0000:01:00.0: attach allowed to drvr mt7921e [internal device]
[4.478306] mt7921e 0000:01:00.0: ASIC revision: 79610010
[4.480063] mt7921e: probe of 0000:01:00.0 failed with error -110
Fixes: 0a1059d0f0 ("mt76: mt7921: move mt7921_dma_reset in dma.c")
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Move some mac shared definitions between mt7996, mt7921 and mt7915 in
mt76_connac2_mac.h.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
eeprom.h is mostly empty for mt7921, so get rid of it.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
gen_ppe_thresh routine is shared between mt7615, mt7915, mt7921 and
mt7996 so move it in mt76_connac module.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
sta_ps callback is just an empty stub for most of the drivers,
so get rid of them.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Most of connac based drivers (mt7921, mt7615, mt7663) share the same
code to enable interrupts. Move it in mt76_connac module.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
irq_tasklet struct is used by most of the drivers (e.g. mt7915, mt7921,
mt7615, mt7663 and mt7996) so move it in common code.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3
video mode display. Add support for these panels.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-4-bcf9ba4de46f@linaro.org
Some bright vendors mount their display panels upside down. Add the
required pieces to allow for accounting for that.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-3-bcf9ba4de46f@linaro.org
This chip supports controlling the backlight via DCS commands, on at
least some panels. Add support for doing so.
Note this may only concern the NT36523*W* variant. Nobody knows, really,
there's no docs.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jianhua Lu <lujianhua000@gmail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-2-bcf9ba4de46f@linaro.org
Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3
video mode display. Document it and allow rotation while at it (Lenovo
mounted it upside down!).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-1-bcf9ba4de46f@linaro.org
This module is used by the Qualcomm sa8775p platform for passing the
reboot reason to the bootloader. Enable building it in the arm64
defconfig as a module.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable ADC driver to be built as a module which will
add support for ADC in TI K3 specific SoCs.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable TSCADC driver to be built as a module which will
add support for TI's TSC/ADC MFDevice.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable TI's SA2UL driver to support security acceleration on TI K3 SoCs.
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCZD0PuAAKCRAd+FPLCI8z
YljSAP9IWstTYTmoFOga4Ba4S8LBcmuTBUqHmVbHNZYCO3JrfwD/T4Xn2qvHfdsd
/ajLodjmHoLh/E6HuSai55u6YLGi6As=
=e3Zh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=sofq
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux into soc/dt
Apple SoC DT updates for 6.4 (v2).
A late addition to the tree, adding the PWM controllers and associated
keyboard backlight nodes, since that driver and its bindings are now
on the way to 6.4.
* tag 'asahi-soc-dt-6.4-v2' of https://github.com/AsahiLinux/linux:
arm64: dts: apple: t8112: Add PWM controller
arm64: dts: apple: t600x: Add PWM controller
arm64: dts: apple: t8103: Add PWM controller
Link: https://lore.kernel.org/r/d0862463-acb3-ce83-6493-281a833ec87e@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When the BIOS has been configured for Fast Boot, systems with mt7921e
have non-functional wifi. Turning on Fast boot caused both bus master
enable and memory space enable bits in PCI_COMMAND not to get configured.
The mt7921 driver already sets bus master enable, but explicitly check
and set memory access enable as well to fix this problem.
Tested-by: Anson Tsao <anson.tsao@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
FIF_* flags from mac80211 is not ABI. mt7921 should not pass it into mcu
directly. Remap FIF_* to driver defined flags as mcu command input.
Fixes: c222f77fd4 ("wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent")
Signed-off-by: Neil Chen <yn.chen@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since the fw offload capability check is shared between pci,usb and sdio
devices, move it in common init code and reduce code duplication.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Currently using BSS_INFO_PS command will sometimes cause packet drop in
hw rx queue.
Temporarily remove this function until finding the cause.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Init mpdu density based on the hardware capability to prevent rx drop.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fix the tail and data pointers. The rxd->len in mt7996_mcu_rxd does not
include the length of general rxd. It only includes the length of
firmware event rxd. Use skb->length to get the correct length.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
