Since commit c588072bba ("iommu/vt-d: Convert intel iommu driver to the
iommu ops"), function copy_reserved_iova() is not referenced, so delete
it.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1609940111-28563-3-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce mhi_get_free_desc_count() API to return number
of TREs available to queue buffer. MHI clients can use this
API to know before hand if ring is full without calling queue
API.
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1610388462-16322-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add driver for the Qualcomm interconnect buses found in SDX55 based
platforms. The topology consists of several NoCs that are controlled by
a remote processor that collects the aggregated bandwidth for each
master-slave pairs.
Based on SM8250 driver and generated from downstream dts.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121053254.8355-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
The Qualcomm SDX55 platform has several bus fabrics that could be
controlled and tuned dynamically over RPMh according to the bandwidth
demand.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210121053254.8355-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Fix the following coccicheck warnings:
./net/ipv4/esp4_offload.c:288:32-34: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Commit 3d1387b3b8 ("media: vidtv: fix some warnings") replaced
the unused flexible array member at the end of struct vidtv_mpeg_ts
with a pointer. This broke the 188-byte alignment since the struct
no longer was 4 bytes in size.
Fix this by removing this field entirely.
Fixes: 3d1387b3b8 ("media: vidtv: fix some warnings")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PMT write function was refactored and this broke the CRC computation.
Fix it.
Fixes: db9569f67e ("media: vidtv: cleanup PMT write table function")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The "bec" struct isn't necessarily always initialized. For example, the
mcp251xfd_get_berr_counter() function doesn't initialize anything if the
interface is down.
Fixes: 52c793f240 ("can: netlink support for bus-error reporting and counters")
Link: https://lore.kernel.org/r/YAkaRdRJncsJO8Ve@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In Classical CAN there are RTR frames. RTR frames have the RTR bit set, may
have a dlc != 0, but contain no data.
This patch optimizes the TX-path to not copy any data for RTR frames.
Link: https://lore.kernel.org/r/20210114153448.1506901-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In Classical CAN there are RTR frames. RTR frames have the RTR bit set, may
have a dlc != 0, but contain no data.
This patch changes the RX-path to no copy any data for RTR frames, so that the
data field in the CAN frame stays 0x0.
Link: https://lore.kernel.org/r/20210114153448.1506901-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CAN-FD frames have only specific frame length (0, 1, 2, 3, 4, 5, 6, 7, 8, 12,
16, 20, 24, 32, 48, 64). A CAN-FD frame provided by user space might not cover
the whole CAN-FD frame. To avoid sending garbage over the CAN bus the driver
pads the CAN frame with 0x0 (if MCP251XFD_SANITIZE_CAN is activated).
This patch cleans up the pad len calculation. Rounding to full u32 brings no
benefit, in case of CRC transfers, the hw_tx_obj->data is not aligned to u32
anyway.
Link: https://lore.kernel.org/r/20210114153448.1506901-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The sizeof(u32) is hardcoded. It's better to use the config value from the
regmap.
It increases the size of target object, but it's flexible when new mcp chip
need other val_bytes.
Link: https://lore.kernel.org/r/20210122081334.213957-1-suyanjun218@gmail.com
Signed-off-by: Su Yanjun <suyanjun218@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This change fixes the checkpatch warning described in this commit commit
cbacb5ab0a ("docs: printk-formats: Stop encouraging use of unnecessary
%h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless so do
not encourage the use of %hh[xudi] or %h[xudi].
Link: https://lore.kernel.org/r/20210124150916.1920434-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit 652562e5ff ("can: length: can_fd_len2dlc(): simplify length
calculcation") the readability of the code degraded and became more error
prone. To counteract this, partially convert that patch and replace open coded
values (of the original code) with proper defines.
Fixes: 652562e5ff ("can: length: can_fd_len2dlc(): simplify length calculcation")
Cc: Vincent MAILHOL <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210118201346.79422-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The can_get_state_str() function is also relevant to the drivers. Export the
symbol and make it visible in the can/dev.h header.
Link: https://lore.kernel.org/r/20210119170355.12040-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The recent fix for handling the UIP bit unearthed another issue in the RTC
code. If the RTC is advertised but the readout is straight 0xFF because
it's not available, the old code just proceeded with crappy values, but the
new code hangs because it waits for the UIP bit to become low.
Add a sanity check in the RTC CMOS probe function which reads the RTC_VALID
register (Register D) which should have bit 0-6 cleared. If that's not the
case then fail to register the CMOS.
Add the same check to mc146818_get_time(), warn once when the condition
is true and invalidate the rtc_time data.
Reported-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mickaël Salaün <mic@linux.microsoft.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/87tur3fx7w.fsf@nanos.tec.linutronix.de
Convert spin_[lock|unlock] functions of pin bank to
raw_spinlock to support preempt-rt for pinctrl-s3c64xx. Below patch
converted spinlock_t to raw_spinlock_t but it didn't convert the
s3c64xx's spinlock.
Fixes: 1f306ecbe0 ("pinctrl: samsung: use raw_spinlock for locking")
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20210127001631.91209-1-chanho61.park@samsung.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In commit 3499ba8198 ("xen: Fix event channel callback via INTX/GSI")
I reworked the triggering of xenbus_probe().
I tried to simplify things by taking out the workqueue based startup
triggered from wake_waiting(); the somewhat poorly named xenbus IRQ
handler.
I missed the fact that in the XS_LOCAL case (Dom0 starting its own
xenstored or xenstore-stubdom, which happens after the kernel is booted
completely), that IRQ-based trigger is still actually needed.
So... put it back, except more cleanly. By just spawning a xenbus_probe
thread which waits on xb_waitq and runs the probe the first time it
gets woken, just as the workqueue-based hack did.
This is actually a nicer approach for *all* the back ends with different
interrupt methods, and we can switch them all over to that without the
complex conditions for when to trigger it. But not in -rc6. This is
the minimal fix for the regression, although it's a step in the right
direction instead of doing a partial revert and actually putting the
workqueue back. It's also simpler than the workqueue.
Fixes: 3499ba8198 ("xen: Fix event channel callback via INTX/GSI")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/4c9af052a6e0f6485d1de43f2c38b1461996db99.camel@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
By adding this cast '(__force __le16)' this sparse warning
is fixed:
drivers/media/i2c/ov02a10.c:391:19: warning: cast to restricted __le16
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix two smatch warnings:
drivers/staging/media/atomisp//pci/ia_css_firmware.h:52:29: warning: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration
drivers/staging/media/atomisp//pci/ia_css_control.h:49:24: warning: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration
Add '#include <linux/device.h>' to ia_css_firmware.h so struct device is defined.
ia_css_control.h includes ia_css_firmware.h, so it is sufficient to
just modify ia_css_firmware.h.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/dvb-frontends/rtl2832.c:702 rtl2832_read_status() warn: missing error code 'ret'
'ret' is indeed not set, so set it to -EINVAL so a proper error
code is returned.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/usb/dvb-usb-v2/rtl28xxu.c:1040 rtl2832u_frontend_attach() warn: missing error code 'ret'
It is actually a bogus warning since in this particular case ret isn't
meant to be set. But by reworking the code a bit the code is actually
a lot more understandable and it fixes this warning.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this smatch warning:
drivers/media/pci/ivtv/ivtv-driver.c:900 ivtv_setup_pci() warn: 'itv->base_addr' not released on lines: 876.
One error path didn't release the memory regions.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:829 c8sectpfe_probe() warn: missing error code 'ret'
Set ret to -EINVAL if the reset gpio was not found.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix two typos: dvdd -> dovdd and dvdd -> avdd
Both clearly copy-and-paste mistakes.
Fixes this smatch warning:
drivers/media/i2c/ov8865.c:2852 ov8865_probe() warn: passing zero to 'PTR_ERR'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/tuners/it913x.c:65 it913x_init() warn: missing error code 'ret'
Set ret to -EINVAL if the clock identifier was invalid.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes this smatch warning:
drivers/media/platform/davinci/vpbe.c:632 vpbe_initialize() warn: missing error code 'ret'
The function returns 'ret', but instead 'err' was set to -ENOMEM.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If a menu has more than 64 items, then don't check menu_skip_mask
for items 65 and up.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: syzbot+42d8c7c3d3e594b34346@syzkaller.appspotmail.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix this compiler warning on i686:
In file included from include/linux/printk.h:409,
from include/linux/kernel.h:16,
from drivers/staging/media/atomisp/pci/hmm/hmm.c:23:
drivers/staging/media/atomisp/pci/hmm/hmm.c: In function 'hmm_alloc':
drivers/staging/media/atomisp/pci/hmm/hmm.c:272:3: warning: format '%ld' expects argument of type 'long int', but argument 6 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
272 | "%s: pages: 0x%08x (%ld bytes), type: %d from highmem %d, user ptr %p, cached %d\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use %zu instead of %ld.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function is not necessary and largely a remnant of
dvb-usb workaround and is now controlled by dvb-usb-v2.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
lme2510_int_read is not atomically called so use GFP_KERNEL for
usb_alloc_urb and usb_submit_urb which is the first in the chain
of interrupt submissions.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a comma used instead of a semicolon that causes multiple
statements to be executed after an if instead of just the intended
single statement.
Replace the comma with a semicolon.
Fixes: 15e1ce3318 ("[media] lmedm04: Fix usb_submit_urb BOGUS urb xfer, pipe 1 != type 3 in interrupt urb")
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
prescaler larger than 8 would mean the carrier is at most 152Hz,
which does not make sense for IR carriers.
Reported-by: syzbot+6d31bf169a8265204b8d@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To save power, gate/reset the hardware block while the system is
asleep or powered off.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In preparation for adding suspend/resume hooks, factor out the hardware
initialization from the driver probe/remove functions.
The timeout programmed during init is taken from the `struct rc_dev` so
it is maintained across an exit/init cycle.
This resolves some trivial issues with the probe function: throwing away
the error from clk_prepare_enable and using the wrong type for the
temporary register value.
It also fixes the order of the remove function to unregister the RC
device before turning off the hardware. This prevents userspace from
triggering register writes (via LIRC_SET_REC_TIMEOUT) while the hardware
is disabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Only one register, SUNXI_IR_CIR_REG, is accessed from outside the
interrupt handler, and that register is not accessed from inside it.
As there is no overlap between different contexts, no lock is needed.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The register writes during driver removal occur after the device is
already put back in reset, so they never had any effect.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>