Commit graph

996,399 commits

Author SHA1 Message Date
Alexandre Belloni
b0d42defe1 rtc: mv: remove mv_rtc_alarm_ops
Move the alarm callbacks in mv_rtc_ops and clear RTC_FEATURE_ALARM to
signal that alarms are not available instead of having a supplementary
struct rtc_class_ops.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-6-alexandre.belloni@bootlin.com
2021-01-16 23:19:26 +01:00
Alexandre Belloni
30f5bd537f rtc: cmos: remove cmos_rtc_ops_no_alarm
Clear RTC_FEATURE_ALARM to signal that alarms are not available instead of
having a supplementary struct rtc_class_ops with a NULL .set_alarm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-5-alexandre.belloni@bootlin.com
2021-01-16 23:19:26 +01:00
Alexandre Belloni
95151801ed rtc: armada38x: remove armada38x_rtc_ops_noirq
Clear RTC_FEATURE_ALARM to signal that alarms are not available instead of
having a supplementary struct rtc_class_ops with a NULL .set_alarm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-4-alexandre.belloni@bootlin.com
2021-01-16 23:19:26 +01:00
Alexandre Belloni
d9b0dd54a1 rtc: pl031: use RTC_FEATURE_ALARM
Clear RTC_FEATURE_ALARM instead of setting set_alarm, read_alarm and
alarm_irq_enable to NULL.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210110231752.1418816-3-alexandre.belloni@bootlin.com
2021-01-16 23:19:26 +01:00
Alexandre Belloni
7ae41220ef rtc: introduce features bitfield
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.

The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.

Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
2021-01-16 23:19:26 +01:00
Bartosz Golaszewski
3be95d2774 rtc: s5m: check the return value of s5m8767_rtc_init_reg()
This function can fail if regmap operations fail so check its return
value in probe().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210114102219.23682-4-brgl@bgdev.pl
2021-01-16 23:19:12 +01:00
Bartosz Golaszewski
7db7ad0817 rtc: s5m: use devm_i2c_new_dummy_device()
Use the managed variant of i2c_new_dummy_device() to shrink code and
remove the goto label. We can drop the remove callback now too.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210114102219.23682-3-brgl@bgdev.pl
2021-01-16 23:19:12 +01:00
Bartosz Golaszewski
1f0cbda3b4 rtc: s5m: select REGMAP_I2C
The rtc-s5m uses the I2C regmap but doesn't select it in Kconfig so
depending on the configuration the build may fail. Fix it.

Fixes: 959df7778b ("rtc: Enable compile testing for Maxim and Samsung drivers")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210114102219.23682-2-brgl@bgdev.pl
2021-01-16 23:19:12 +01:00
Linus Torvalds
0da0a8a0a0 SCSI fixes on 20210116
Nine minor fixes, 7 in drivers and 2 in the core SCSI disk driver (sd)
 which should be harmless involving removing an unused variable and
 quietening a spurious warning.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYANKJiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishVSyAP9a4xdK
 9A4seh2/LW3GwPsoQUJQINe4yok/lGVXSQk3XQD/QkkYbzeqVGN4BHK1LQX2R9Sw
 wy+E4ENjdOY+9p+KMxo=
 =m0jh
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Nine minor fixes, seven in drivers and two in the core SCSI disk
  driver (sd) which should be harmless involving removing an unused
  variable and quietening a spurious warning"

Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Remove obsolete variable in sd_remove()
  scsi: sd: Suppress spurious errors when WRITE SAME is being disabled
  scsi: scsi_debug: Fix memleak in scsi_debug_init()
  scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility"
  scsi: qedi: Correct max length of CHAP secret
  scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback
  scsi: ufs: Relocate flush of exceptional event
  scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL
  scsi: ufs: Fix possible power drain during system suspend
2021-01-16 12:25:40 -08:00
Al Viro
23d8f5b684 make dump_common_audit_data() safe to be called from RCU pathwalk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-16 15:12:08 -05:00
Al Viro
bca585d24a new helper: d_find_alias_rcu()
similar to d_find_alias(inode), except that
	* the caller must be holding rcu_read_lock()
	* inode must not be freed until matching rcu_read_unlock()
	* result is *NOT* pinned and can only be dereferenced until
the matching rcu_read_unlock().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-16 15:12:06 -05:00
Al Viro
d36a1dd9f7 dump_common_audit_data(): fix racy accesses to ->d_name
We are not guaranteed the locking environment that would prevent
dentry getting renamed right under us.  And it's possible for
old long name to be freed after rename, leading to UAF here.

Cc: stable@kernel.org # v2.6.2+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-16 15:11:35 -05:00
Linus Torvalds
54c6247d06 block-5.11-2021-01-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmADKbkQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpgrWD/9gmAaxW3cF5K9UPcfT9VRz50PRfa5cGNwu
 eQ3ETIkqQtmizibj9BXBYwPWn6FK6gSeI8LjP0SXOUxkG1O23Hwwb6ieQ2tRg+CX
 Wmb+S7EUwpkHBWWmulfsX9PXQsyG2D4oz8Obxwp0jvI3XzuEeMQ5gYTpO+0YTxi1
 VgdeOZfV5Xben0kvpwlUfowdOD6CK8LSPJ4KjuynkvgtfKuipsCmJqMqRZqFMu3f
 F4p+ngVYuqEcKddh+h5pFifUy2bo076eYe4kE6vGlmdySjaVyHiLJcBmkMDxb/cp
 daWTaBGCsvZfP0uwLgATD0P0UqJn44Vx15FlN50uSlrfaEiglO6aBuWwbQpuPpq/
 FF/hhUscs9cmZhYGO8TNnOZHfzNmYmPx9dH/D+Fo6mqCaGvsOyGGUeKuG86hfLlM
 AEVGFiVdlQNdLq7f2HHFKfWL1XvHbvGrgQ5d4dnJrD9a/1TgXTiluleC1+vvLfoP
 cRTATNtfMTcc88QF+L1BxtHXkUsf6dyqPt1AalmKqwHDv9d1C/B0aZt6a/JFTXp4
 utsxDi+WOb4HVT4/ojl35HML6CWATqVgHH1rSG2Q8UPWvLX+O8QalRIBhtNaRt9k
 hr3joKlmeyCjJdrgE+07xlwfiqTmmhmTkGjJw39KyQTiOyyEPey+HWwJEhO1QaFR
 hgoQvLA4mw==
 =CYyj
 -----END PGP SIGNATURE-----

Merge tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Just an nvme pull request via Christoph:

   - don't initialize hwmon for discover controllers (Sagi Grimberg)

   - fix iov_iter handling in nvme-tcp (Sagi Grimberg)

   - fix a preempt warning in nvme-tcp (Sagi Grimberg)

   - fix a possible NULL pointer dereference in nvme (Israel Rukshin)"

* tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
  nvme: don't intialize hwmon for discovery controllers
  nvme-tcp: fix possible data corruption with bio merges
  nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT
  nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
2021-01-16 11:39:58 -08:00
Pavel Begunkov
4325cb498c io_uring: fix uring_flush in exit_files() warning
WARNING: CPU: 1 PID: 11100 at fs/io_uring.c:9096
	io_uring_flush+0x326/0x3a0 fs/io_uring.c:9096
RIP: 0010:io_uring_flush+0x326/0x3a0 fs/io_uring.c:9096
Call Trace:
 filp_close+0xb4/0x170 fs/open.c:1280
 close_files fs/file.c:401 [inline]
 put_files_struct fs/file.c:416 [inline]
 put_files_struct+0x1cc/0x350 fs/file.c:413
 exit_files+0x7e/0xa0 fs/file.c:433
 do_exit+0xc22/0x2ae0 kernel/exit.c:820
 do_group_exit+0x125/0x310 kernel/exit.c:922
 get_signal+0x3e9/0x20a0 kernel/signal.c:2770
 arch_do_signal_or_restart+0x2a8/0x1eb0 arch/x86/kernel/signal.c:811
 handle_signal_work kernel/entry/common.c:147 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x148/0x250 kernel/entry/common.c:201
 __syscall_exit_to_user_mode_work kernel/entry/common.c:291 [inline]
 syscall_exit_to_user_mode+0x19/0x50 kernel/entry/common.c:302
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

An SQPOLL ring creator task may have gotten rid of its file note during
exit and called io_disable_sqo_submit(), but the io_uring is still left
referenced through fdtable, which will be put during close_files() and
cause a false positive warning.

First split the warning into two for more clarity when is hit, and the
add sqo_dead check to handle the described case.

Reported-by: syzbot+a32b546d58dde07875a1@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-16 12:14:02 -07:00
Pavel Begunkov
6b393a1ff1 io_uring: fix false positive sqo warning on flush
WARNING: CPU: 1 PID: 9094 at fs/io_uring.c:8884
	io_disable_sqo_submit+0x106/0x130 fs/io_uring.c:8884
Call Trace:
 io_uring_flush+0x28b/0x3a0 fs/io_uring.c:9099
 filp_close+0xb4/0x170 fs/open.c:1280
 close_fd+0x5c/0x80 fs/file.c:626
 __do_sys_close fs/open.c:1299 [inline]
 __se_sys_close fs/open.c:1297 [inline]
 __x64_sys_close+0x2f/0xa0 fs/open.c:1297
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

io_uring's final close() may be triggered by any task not only the
creator. It's well handled by io_uring_flush() including SQPOLL case,
though a warning in io_disable_sqo_submit() will fallaciously fire by
moving this warning out to the only call site that matters.

Reported-by: syzbot+2f5d1785dc624932da78@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-16 12:14:02 -07:00
Jens Axboe
c93cc9e16d io_uring: iopoll requests should also wake task ->in_idle state
If we're freeing/finishing iopoll requests, ensure we check if the task
is in idling in terms of cancelation. Otherwise we could end up waiting
forever in __io_uring_task_cancel() if the task has active iopoll
requests that need cancelation.

Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-16 12:13:59 -07:00
Linus Torvalds
11c0239ae2 io_uring-5.11-2021-01-16
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmADKaIQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpnjVD/402IBhG40EoLMdcztTbOF7S5JZLbECbWam
 HPN99D0YyjRQNwsd7CPzeO+7W4zO4P0T/NcnXLF1TmPnkRynDNsT4oygcLrJoH8n
 xZoAXi6ykM/4eE+4NSaNfWF/f3DtGepsIHMpSNNyzE+qxz4I36/EPTu7M13ga1A4
 H6pAbvU1DrDZ+z62rhWcb+4ouUV7QDS02UTNo9cW4ueeMNLyW/Zxp9lBzNuAkbzF
 gRlsxkhXLgcqtA36EdRWKs9fOwcdTyiMGzS5DRRmmE/O/a3//yl0ENFTPmWd6+jf
 daZcAYW6BdB+0va1sYGbECl9zOkMlhcm/hNFnl3ZmFIW5a4QiRy2WLoWuiNwVSYM
 nGCz0l5P2pP32tt0fQlSQh8KdI+py+c7MhJ1IaRhJi8X4t1MHoOR3vlilw0UvrdQ
 zpm8H+hMmL3g9/6pZLwxBvd31N1Y/A8ghh6qTdQ2EwdPyjImR3Xv/wYUqdbfvBo5
 VcB6ccoFwuP5KzQcyI2j2WRcx7AtHZuiVGvoqkA8QL9Onq3GWoY8tnkf/sP8RxlQ
 wL91wVkT46UMkCLeY7QCGdx4nnmSahCEa8SQEYxibnh++9jh+c6Y5FtZc3YNjnED
 GRFT9vJmqNmrvKCLo78iTf/F8vJllGXQRKDeMuU9DVj3ylhZOBSEhpmMIZwdXNQa
 CqMCqia4Xg==
 =XL14
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "We still have a pending fix for a cancelation issue, but it's still
  being investigated. In the meantime:

   - Dead mm handling fix (Pavel)

   - SQPOLL setup error handling (Pavel)

   - Flush timeout sequence fix (Marcelo)

   - Missing finish_wait() for one exit case"

* tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block:
  io_uring: ensure finish_wait() is always called in __io_uring_task_cancel()
  io_uring: flush timeouts that should already have expired
  io_uring: do sqo disable on install_fd error
  io_uring: fix null-deref in io_disable_sqo_submit
  io_uring: don't take files/mm for a dead task
  io_uring: drop mm and files after task_work_run
2021-01-16 11:12:02 -08:00
Linus Torvalds
acda701bf1 RISC-V Fixes for 5.11-rc4
There are a few more fixes than a normal rc4, largely due to the bubble
 introduced by the holiday break:
 
 * A fix to return -ENOSYS for syscall number -1, which previously
   returned an uninitialized value.
 * A fix to time_init() to ensure of_clk_init() has been called, without
   which clock drivers may not be initialized.
 * A fix to the sifive,uart0 driver to properly display the baud rate.  A
   fix to initialize MPIE that allows interrupts to be processed during
   system calls.
 * A fix to avoid erronously begin tracing IRQs when interrupts are
   disabled, which at least triggers suprious lockdep failures.
 * A workaround for a warning related to calling smp_processor_id() while
   preemptible.  The warning itself is suprious on currently availiable
   systems.
 * A fix to properly include the generic time VDSO calls.  A fix to our
   kasan address mapping.  A fix to the HiFive Unleashed device tree,
   which allows the Ethernet PHY to be properly initialized by Linux (as
   opposed to relying on the bootloader).
 * A defconfig update to include SiFive's GPIO driver, which is present
   on the HiFive Unleashed and necessary to initialize the PHY.
 * A fix to avoid allocating memory while initializing reserved memory.
 * A fix to avoid allocating the last 4K of memory, as pointers there
   alias with syscall errors.
 
 There are also two cleanups that should have no functional effect but do
 fix build warnings:
 
 * A cleanup to drop a duplicated definition of PAGE_KERNEL_EXEC.
 * A cleanup to properly declare the asm register SP shim.
 * A cleanup to the rv32 memory size Kconfig entry, to reflect the actual
   size of memory availiable.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmACfN8THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiWkQD/40g0dX0dX7fkGHk/zbwlkJffA/VCF7
 +dtqfJSjpRkfPCBEOCJxfCYdHM0adrH2FACwN2JhQmOzOpbccO6Xhr/9jgqms43x
 WB5J0WNKrIT2ZGpB6Hp5htD2lo2OuCLNtdnMK0I3NJMBhJHUKb4HGMwFXKBg+RK1
 LtOQMKEJSgkwT6Mhe5K8+tz5VLu6XQUJMCAzxoeFoTDi513HDDcAoOcvfKt0VujD
 1g2HDtIhYlIYUiGliBcFh88slycWh8Im41Hi2Dh5Nfe9PaiexskpL1+g+CCnZUpa
 yIi72AOirjNxxvfPfmAcTXRx4lHB/YQnB9EUnI6W16D7XniXedC7StR+zhzRjkuy
 lePMKJE6x8mTMF5zv2GLP1FalBeJ2SFwLtboT7zfRlhI+IucMqCaSsE06RHg5/52
 YL9ScVi0xS423f3ctGNUrlSKQKdV1s5D7pm6Qf2WZlqUvwKTspOvkzDn8hNpINCe
 0D3EvPDWVoRSWx4u0Ao/Ig2+xwumtun1IPmF7WHqW+aSxVTs0g0XiEiA8ubaU9bD
 JpqfCL9ftzD5S85igHp8+a3zuFmK+sgR/7JCdp7TqBoHmLoQjg8c5L56m1cZy8Mn
 Wu6E1X0n0IyDDjDqWbGTkfkKC6CvbUy6wRW3LdEnhufon3ldiPMTB66gLs4qfcqF
 Yq5WkrJyGK98Ww==
 =guLu
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
 "There are a few more fixes than a normal rc4, largely due to the
  bubble introduced by the holiday break:

   - return -ENOSYS for syscall number -1, which previously returned an
     uninitialized value.

   - ensure of_clk_init() has been called in time_init(), without which
     clock drivers may not be initialized.

   - fix sifive,uart0 driver to properly display the baud rate. A fix to
     initialize MPIE that allows interrupts to be processed during
     system calls.

   - avoid erronously begin tracing IRQs when interrupts are disabled,
     which at least triggers suprious lockdep failures.

   - workaround for a warning related to calling smp_processor_id()
     while preemptible. The warning itself is suprious on currently
     availiable systems.

   - properly include the generic time VDSO calls. A fix to our kasan
     address mapping. A fix to the HiFive Unleashed device tree, which
     allows the Ethernet PHY to be properly initialized by Linux (as
     opposed to relying on the bootloader).

   - defconfig update to include SiFive's GPIO driver, which is present
     on the HiFive Unleashed and necessary to initialize the PHY.

   - avoid allocating memory while initializing reserved memory.

   - avoid allocating the last 4K of memory, as pointers there alias
     with syscall errors.

  There are also two cleanups that should have no functional effect but
  do fix build warnings:

   - drop a duplicated definition of PAGE_KERNEL_EXEC.

   - properly declare the asm register SP shim.

   - cleanup the rv32 memory size Kconfig entry, to reflect the actual
     size of memory availiable"

* tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix maximum allowed phsyical memory for RV32
  RISC-V: Set current memblock limit
  RISC-V: Do not allocate memblock while iterating reserved memblocks
  riscv: stacktrace: Move register keyword to beginning of declaration
  riscv: defconfig: enable gpio support for HiFive Unleashed
  dts: phy: add GPIO number and active state used for phy reset
  dts: phy: fix missing mdio device and probe failure of vsc8541-01 device
  riscv: Fix KASAN memory mapping.
  riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL
  riscv: cacheinfo: Fix using smp_processor_id() in preemptible
  riscv: Trace irq on only interrupt is enabled
  riscv: Drop a duplicated PAGE_KERNEL_EXEC
  riscv: Enable interrupts during syscalls with M-Mode
  riscv: Fix sifive serial driver
  riscv: Fix kernel time_init()
  riscv: return -ENOSYS for syscall -1
2021-01-16 11:00:08 -08:00
Pablo Neira Ayuso
ce5379963b netfilter: nft_dynset: dump expressions when set definition contains no expressions
If the set definition provides no stateful expressions, then include the
stateful expression in the ruleset listing. Without this fix, the dynset
rule listing shows the stateful expressions provided by the set
definition.

Fixes: 65038428b2 ("netfilter: nf_tables: allow to specify stateful expression in set definition")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-16 19:54:42 +01:00
Linus Torvalds
9348b73c2e mm: don't play games with pinned pages in clear_page_refs
Turning a pinned page read-only breaks the pinning after COW.  Don't do it.

The whole "track page soft dirty" state doesn't work with pinned pages
anyway, since the page might be dirtied by the pinning entity without
ever being noticed in the page tables.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-16 10:51:26 -08:00
Linus Torvalds
29a951dfb3 mm: fix clear_refs_write locking
Turning page table entries read-only requires the mmap_sem held for
writing.

So stop doing the odd games with turning things from read locks to write
locks and back.  Just get the write lock.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-16 10:46:39 -08:00
Dmitry Baryshkov
24a7dc6fdb iio: adc: qcom-vadc-common: scale adcmap_100k_104ef_104fb
Scale adcmap_100k_104ef_104fb temp values by the factor of 1000 to
remove extra multiplication in qcom_vadc_scale_therm().

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-12-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:36:06 +00:00
Dmitry Baryshkov
48d2e2ff85 iio: adc: qcom-vadc-common: simplify qcom_vadc_map_voltage_temp
All volt-temp tables here are sorted in descending order. There is no
need to accout for (unused) ascending table sorting case, so simplify
the conversion function.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-11-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:34:29 +00:00
Dmitry Baryshkov
3bd0ceb566 iio: adc: qcom-vadc-common: rewrite vadc7 die temp calculation
qcom_vadc7_scale_hw_calib_die_temp() uses a table format different from
the rest of volt/temp conversion functions in this file. Also the
conversion functions results in non-monothonic values conversion, which
seems wrong.

Rewrite qcom_vadc7_scale_hw_calib_die_temp() to use
qcom_vadc_map_voltage_temp() directly, like the rest of conversion
functions do.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-10-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:32:36 +00:00
Dmitry Baryshkov
bb01e26374 iio: adc: move vadc_map_pt from header to the source file
struct vadc_map_pt is not used outside of qcom-vadc-common.c, so move it
there from the global header file.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-9-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:28:18 +00:00
Dmitry Baryshkov
6e39b145ce iio: provide of_iio_channel_get_by_name() and devm_ version it
There might be cases when the IIO channel is attached to the device
subnode instead of being attached to the main device node. Allow drivers
to query IIO channels by using device tree nodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-8-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:27:51 +00:00
Dmitry Baryshkov
9695a2a52c iio: adc: qcom-spmi-adc5: use of_device_get_match_data
Use of_device_get_match_data() instead of hand-coding it manually.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-7-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:23:36 +00:00
Dmitry Baryshkov
ec82edb258 iio: adc: move qcom-vadc-common.h to include dir
qcom-vadc-common module will be used by ADC thermal monitoring driver,
so move it to global include dir.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-6-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:20:56 +00:00
Pablo Neira Ayuso
0c5b7a501e netfilter: nft_dynset: add timeout extension to template
Otherwise, the newly create element shows no timeout when listing the
ruleset. If the set definition does not specify a default timeout, then
the set element only shows the expiration time, but not the timeout.
This is a problem when restoring a stateful ruleset listing since it
skips the timeout policy entirely.

Fixes: 22fe54d5fe ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-16 19:20:15 +01:00
Dmitry Baryshkov
e2621acd6d iio: adc: qcom-vadc-common: use fixp_linear_interpolate
Use new function fixp_linear_interpolate() instead of hand-coding the
linear interpolation.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-5-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:19:00 +00:00
Dmitry Baryshkov
c7ba98fc40 iio: adc: qcom-vadc: move several adc5 functions to common file
ADC-TM5 driver will make use of several functions from ADC5 driver. Move
them to qcom-vadc-common driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-4-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:17:26 +00:00
Craig Tatlor
8d502ef682 fixp-arith: add a linear interpolation function
Adds a function to interpolate against two points,
this is carried arount as a helper function by tons of drivers.

Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-3-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-16 18:14:53 +00:00
Pablo Neira Ayuso
fca05d4d61 netfilter: nft_dynset: honor stateful expressions in set definition
If the set definition contains stateful expressions, allocate them for
the newly added entries from the packet path.

Fixes: 65038428b2 ("netfilter: nf_tables: allow to specify stateful expression in set definition")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-01-16 18:57:26 +01:00
Dmitry Baryshkov
0fb56bf95c arm64: dts: qcom: qrb5165-rb5: sort nodes alphabetically
Move swr0 device node to keep alphabetical sorting order of device tree
nodes.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210116002346.422479-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-16 09:44:36 -06:00
Andreas Kemnade
cd060b4d08 power: supply: bq27xxx: fix polarity of current_now
current_now has to be negative during discharging and positive during
charging, the behavior seen is the other way round.

Tested on GTA04 with Openmoko battery.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 15:44:58 +01:00
Junlin Yang
95b78d5370 power: supply: charger-manager: fix incorrect health status
cm->emergency_stop will only be the value in the enumeration,
and cannot be less than zero, it will get an exception value.
So replace it with the corresponding value.

Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 15:02:15 +01:00
Claudiu Beznea
b7e15bd0c1 power: reset: at91-sama5d2_shdwc: add support for sama7g5
Add support for SAMA7G5 by adding proper struct reg_config structure
and since SAMA7G5 is not currently on LPDDR setups the commit also
avoid the mapping of DDR controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 14:41:48 +01:00
Claudiu Beznea
fe487c75a4 dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
Add compatible for Microchip SAMA7G5's shutdown controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 14:41:48 +01:00
Claudiu Beznea
95aa21a3f1 power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
According to datasheet WKUPDBC mask is b/w bits 26..24.

Fixes: f80cb48843 ("power: reset: at91-shdwc: add new shutdown controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 14:41:48 +01:00
Mike Looijmans
26fe7d1da9 dt-bindings: power/supply: Add ltc4162-l-charger
Add support for the LTC4162-L Li-Ion battery charger. The driver allows
reading back telemetry and to set some charging options like the input
current limit.

This adds the devicetree bindings.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 13:09:12 +01:00
Zheng Yongjun
7088ef6726 power: supply: bq24190_charger: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 12:38:57 +01:00
Zheng Yongjun
f005e63100 power: supply: ab8500_fg: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 12:38:22 +01:00
Tian Tao
f856b2f295 power: supply: ds2780: Switch to using the new API kobj_to_dev()
fixed the following coccicheck:
drivers/power/supply/ds2780_battery.c:627:60-61: WARNING opportunity for
kobj_to_dev()
drivers/power/supply/ds2780_battery.c:672:60-61: WARNING opportunity for
kobj_to_dev()
drivers/power/supply/ds2780_battery.c:640:60-61: WARNING opportunity for
kobj_to_dev()
drivers/power/supply/ds2780_battery.c:685:60-61: WARNING opportunity for
kobj_to_dev()

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 12:36:26 +01:00
Hermes Zhang
3ed510f06e power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
Currently REG_NAC (nominal available capacity) is mapped to
power-supply's CHARGE_NOW property. Some chips do not have
REG_NAC and do not expose CHARGE_NOW at the moment. Some
bq27xxx chips also have another register REG_RM (remaining
capacity). The difference between REG_NAC and REG_RM is load
compensation.

This patch adds register information for REG_RM for all
supported fuel gauges. On systems having REG_NAC it is
ignored, so behaviour does not change. On systems without
REG_NAC, REG_RM will be used to provide CHARGE_NOW
functionality.

As a result there are three more chips exposing CHARGE_NOW:
bq27z561, bq28z610 and bq34z100

Signed-off-by: Hermes Zhang <chenhuiz@axis.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2021-01-16 11:32:28 +01:00
Atish Patra
e557793799
RISC-V: Fix maximum allowed phsyical memory for RV32
Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15 21:35:48 -08:00
Atish Patra
abb8e86b26
RISC-V: Set current memblock limit
Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.

Fix this issue by limiting the memblock if available memory spans the
entire address space.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15 21:35:47 -08:00
Atish Patra
797f0375dd
RISC-V: Do not allocate memblock while iterating reserved memblocks
Currently, resource tree allocates memory blocks while iterating on the
list. It leads to following kernel warning because memblock allocation
also invokes memory block reservation API.

[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795
__insert_resource+0x8e/0xd0
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted
5.10.0-00022-ge20097fb37e2-dirty #549
[    0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50
[    0.000000]  gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20
[    0.000000]  t1 : 00000000 t2 : 00000000 s0 : c1c01f60
[    0.000000]  s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4
[    0.000000]  a2 : 80c12b15 a3 : 80402000 a4 : 80402000
[    0.000000]  a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600
[    0.000000]  s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80
[    0.000000]  s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c
[    0.000000]  s8 : 00000fff s9 : 80000200 s10: c1613b40
[    0.000000]  s11: 00000000 t3 : c1d4a000 t4 : ffffffff

This is also unnecessary as we can pre-compute the total memblocks required
for each memory region and allocate it before the loop. It save precious
boot time not going through memblock allocation code every time.

Fixes: 00ab027a3b ("RISC-V: Add kernel image sections to the resource tree")

Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-15 21:35:46 -08:00
Pravin B Shelar
9ab7e76aef GTP: add support for flow based tunneling API
Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.

Signed-off-by: Pravin B Shelar <pbshelar@fb.com>
Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15 20:31:49 -08:00
Yejune Deng
f4d133d86a tcp_cubic: use memset and offsetof init
In bictcp_reset(), use memset and offsetof instead of = 0.

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Link: https://lore.kernel.org/r/1610597696-128610-1-git-send-email-yejune.deng@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15 20:22:16 -08:00
Menglong Dong
b69df26082 net: tap: check vlan with eth_type_vlan() method
Replace some checks for ETH_P_8021Q and ETH_P_8021AD in
drivers/net/tap.c with eth_type_vlan.

Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
Link: https://lore.kernel.org/r/20210115023238.4681-1-dong.menglong@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-15 20:13:49 -08:00