Commit graph

996,399 commits

Author SHA1 Message Date
Stefan Chulski
2788d8418a net: mvpp2: add FCA periodic timer configurations
Flow Control periodic timer would be used if port in
XOFF to transmit periodic XOFF frames.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Stefan Chulski
d07ea73f37 net: mvpp2: increase BM pool and RXQ size
BM pool and RXQ size increased to support Firmware Flow Control.
Minimum depletion thresholds to support FC are 1024 buffers.
BM pool size increased to 2048 to have some 1024 buffers
space between depletion thresholds and BM pool size.

Jumbo frames require a 9888B buffer, so memory requirements
for data buffers increased from 7MB to 24MB.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Stefan Chulski
6af27a1dc4 net: mvpp2: add PPv23 version definition
This patch add PPv23 version definition.
PPv23 is new packet processor in CP115.
Everything that supported by PPv22, also supported by PPv23.
No functional changes in this stage.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Stefan Chulski
60dcd6b7d9 net: mvpp2: always compare hw-version vs MVPP21
Currently we have PP2v1 and PP2v2 hw-versions, with some different
handlers depending upon condition hw_version = MVPP21/MVPP22.
In a future there will be also PP2v3. Let's use now the generic
"if equal/notEqual MVPP21" for all cases instead of "if MVPP22".

This patch does not change any functionality.
It is not intended to introduce PP2v3.
It just modifies MVPP21/MVPP22 check-condition
bringing it to generic and unified form correct for new-code
introducing and PP2v3 net-next generation.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Stefan Chulski
e54ad1e01c net: mvpp2: add CM3 SRAM memory map
This patch adds CM3 memory map.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Konstantin Porotchkin
60523583b0 dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree
CM3 SRAM address space will be used for Flow Control configuration.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Stefan Chulski
1c2b4812b7 doc: marvell: add CM3 address space and PPv2.3 description
Patch adds CM3 address space and PPv2.3 description.

Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Acked-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:50:23 -08:00
Juergen Gross
f2fa0e5e9f xen/events: link interdomain events to associated xenbus device
In order to support the possibility of per-device event channel
settings (e.g. lateeoi spurious event thresholds) add a xenbus device
pointer to struct irq_info() and modify the related event channel
binding interfaces to take the pointer to the xenbus device as a
parameter instead of the domain id of the other side.

While at it remove the stale prototype of bind_evtchn_to_irq_lateeoi().

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:47:00 -08:00
Juergen Gross
a3daf3d391 xen/netback: fix spurious event detection for common event case
In case of a common event for rx and tx queue the event should be
regarded to be spurious if no rx and no tx requests are pending.

Unfortunately the condition for testing that is wrong causing to
decide a event being spurious if no rx OR no tx requests are
pending.

Fix that plus using local variables for rx/tx pending indicators in
order to split function calls and if condition.

Fixes: 23025393db ("xen/netback: use lateeoi irq binding")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Wei Liu <wl@xen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:47:00 -08:00
Vlad Buslov
6f1995523a net: fib_notifier: don't return positive values on fib registration
The function fib6_walk_continue() cannot return a positive value when
called from register_fib_notifier(), but ignoring causes static analyzer to
generate warnings in users of register_fib_notifier() that try to convert
returned error code to pointer with ERR_PTR(). Handle such case by
explicitly checking for positive error values and converting them to
-EINVAL in fib6_tables_dump().

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:42:43 -08:00
David S. Miller
9f1b0df7b2 mlx5-for-upstream-2021-02-10
Misc cleanups and trivial fixes for net-next
 
 1) spelling mistakes
 2) error path checks fixes
 3) unused includes and struct fields cleanup
 4) build error when MLX5_ESWITCH=no
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmAkttMACgkQSD+KveBX
 +j5yPQgAimEyMsVpEZ5K2Bhs5R08Gvm0+K3n7pSiU3nWAtivbVXAswuGSRvNhqvL
 NqR70IbuBZtFradeDoFf73Mo98v0ocaUP4LFiXBKQcR1ybk/ILdxL1St/t2Kwt5m
 T0kaQbZI3WPKCf66z419REzwiuGJIrIrBlVOnL/ka+MFSw7VRqR+zN5r29HxJlOA
 W0OEc7/3I7zCsJXmWeTWNXqR/Q+p1JxnJywNRoBDi89tl3xnhvo389VoCZcieMOr
 VzNmvA7wHeyK+h/T7b1+iMTXjYAJ+g5ftypMMhackmFQIUaykSBYBEbVjpPWLHjI
 yKzsvQTk/CvRDJNSRnGrn5S3sMDjkQ==
 =q+9G
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-for-upstream-2021-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-for-upstream-2021-02-10

Misc cleanups and trivial fixes for net-next

1) spelling mistakes
2) error path checks fixes
3) unused includes and struct fields cleanup
4) build error when MLX5_ESWITCH=no
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:40:25 -08:00
Nathan Rossi
8a28af7a3e net: ethernet: aquantia: Handle error cleanup of start on open
The aq_nic_start function can fail in a variety of cases which leaves
the device in broken state.

An example case where the start function fails is the
request_threaded_irq which can be interrupted, resulting in a EINTR
result. This can be manually triggered by bringing the link up (e.g. ip
link set up) and triggering a SIGINT on the initiating process (e.g.
Ctrl+C). This would put the device into a half configured state.
Subsequently bringing the link up again would cause the napi_enable to
BUG.

In order to correctly clean up the failed attempt to start a device call
aq_nic_stop.

Signed-off-by: Nathan Rossi <nathan.rossi@digi.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:38:06 -08:00
David S. Miller
b1f19639db Merge branch 'bnxt_en-fixes'
Michael Chan says:

====================
bnxt_en: 2 bug fixes.

Two unrelated fixes.  The first one fixes intermittent false TX timeouts
during ring reconfigurations.  The second one fixes a formatting
discrepancy between the stored and the running FW versions.

Please also queue these for -stable.  Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:36:22 -08:00
Vasundhara Volam
db28b6c77f bnxt_en: Fix devlink info's stored fw.psid version format.
The running fw.psid version is in decimal format but the stored
fw.psid is in hex format.  This can mislead the user to reset the
NIC to activate the stored version to become the running version.

Fix it to display the stored fw.psid in decimal format.

Fixes: 1388875b39 ("bnxt_en: Add stored FW version info to devlink info_get cb.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:36:22 -08:00
Edwin Peer
132e0b65dc bnxt_en: reverse order of TX disable and carrier off
A TX queue can potentially immediately timeout after it is stopped
and the last TX timestamp on that queue was more than 5 seconds ago with
carrier still up.  Prevent these intermittent false TX timeouts
by bringing down carrier first before calling netif_tx_disable().

Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:36:22 -08:00
Sukadev Bhattiprolu
d4083d3c00 ibmvnic: Set to CLOSED state even on error
If set_link_state() fails for any reason, we still cleanup the adapter
state and cannot recover from a partial close anyway. So set the adapter
to CLOSED state. That way if a new soft/hard reset is processed, the
adapter will remain in the CLOSED state until the next ibmvnic_open().

Fixes: 01d9bd792d ("ibmvnic: Reorganize device close")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:33:14 -08:00
Vladimir Oltean
f68cbaed67 net: ipconfig: avoid use-after-free in ic_close_devs
Due to the fact that ic_dev->dev is kept open in ic_close_dev, I had
thought that ic_dev will not be freed either. But that is not the case,
but instead "everybody dies" when ipconfig cleans up, and just the
net_device behind ic_dev->dev remains allocated but not ic_dev itself.

This is a problem because in ic_close_devs, for every net device that
we're about to close, we compare it against the list of lower interfaces
of ic_dev, to figure out whether we should close it or not. But since
ic_dev itself is subject to freeing, this means that at some point in
the middle of the list of ipconfig interfaces, ic_dev will have been
freed, and we would be still attempting to iterate through its list of
lower interfaces while checking whether to bring down the remaining
ipconfig interfaces.

There are multiple ways to avoid the use-after-free: we could delay
freeing ic_dev until the very end (outside the while loop). Or an even
simpler one: we can observe that we don't need ic_dev when iterating
through its lowers, only ic_dev->dev, structure which isn't ever freed.
So, by keeping ic_dev->dev in a variable assigned prior to freeing
ic_dev, we can avoid all use-after-free issues.

Fixes: 46acf7bdbc ("Revert "net: ipv4: handle DSA enabled master network devices"")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:31:39 -08:00
Heiner Kallweit
cb456fce0b r8169: disable detection of bogus xid's 308/388
Several years ago these two entries have been added, but it's not clear
why. There's no trace that there has ever been such a chip version, and
not even the r8101 vendor driver knows these id's. So let's disable
detection, and if nobody complains remove them completely later.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:30:22 -08:00
David S. Miller
9c2db446ea Merge branch 'bond-3ad-200g-400g'
Nikolay Aleksandrov says:

====================
bonding: 3ad: support for 200G/400G ports and more verbose warning
xk
We'd like to have proper 200G and 400G support with 3ad bond mode, so we
need to add new definitions for them in order to have separate oper keys,
aggregated bandwidth and proper operation (patches 01 and 02). In
patch 03 Ido changes the code to use pr_err_once instead of
pr_warn_once which would help future detection of unsupported speeds.

v2: patch 03: use pr_err_once instead of WARN_ONCE
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:28:21 -08:00
Ido Schimmel
5edf55ad95 bonding: 3ad: Print an error for unknown speeds
The bond driver needs to be patched to support new ethtool speeds.
Currently it emits a single warning [1] when it encounters an unknown
speed. As evident by the two previous patches, this is not explicit
enough. Instead, promote it to an error.

[1]
bond10: (slave swp1): unknown ethtool speed (200000) for port 1 (set it to 0)

v2:
* Use pr_err_once() instead of WARN_ONCE()

Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:28:21 -08:00
Nikolay Aleksandrov
138e3b3cc0 bonding: 3ad: add support for 400G speed
In order to be able to use 3ad mode with 400G devices we need to extend
the supported speeds.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:28:21 -08:00
Nikolay Aleksandrov
ab73447c38 bonding: 3ad: add support for 200G speed
In order to be able to use 3ad mode with 200G devices we need to extend
the supported speeds.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:28:21 -08:00
David S. Miller
6bda2f6fae Merge branch 'qede-netpoll-coalesce'
Bhaskar Upadhaya says:

====================
qede: add netpoll and per-queue coalesce support

This is a followup implementation after series

https://patchwork.kernel.org/project/netdevbpf/cover/1610701570-29496-1-git-send-email-bupadhaya@marvell.com/

Patch 1: Add net poll controller support to transmit kernel printks
         over UDP
Patch 2: QLogic card support multiple queues and each queue can be
         configured with respective coalescing parameters, this patch
         add per queue rx-usecs, tx-usecs coalescing parameters
Patch 3: set default per queue rx-usecs, tx-usecs coalescing parameters and
         preserve coalesce parameters across interface up and down

v3: fixed warnings reported by Dan Carpenter
v2: comments from jakub
 - p1: remove poll_controller ndo and add budget 0 support in qede_poll
 - p3: preserve coalesce parameters across interface up and down
===================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:25:06 -08:00
Bhaskar Upadhaya
b0ec5489c4 qede: preserve per queue stats across up/down of interface
Here we do the initialization of coalescing values on load.
per queue coalesce values are also restored across up/down of
ethernet interface.

Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:25:06 -08:00
Bhaskar Upadhaya
a0d2d97d74 qede: add per queue coalesce support for qede driver
per queue coalescing allows better and more finegrained control
over interrupt rates.

Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:25:05 -08:00
Bhaskar Upadhaya
961aa71623 qede: add netpoll support for qede driver
handle netpoll case when qede_poll is called by
netpoll layer with budget 0

Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:25:05 -08:00
Gustavo A. R. Silva
205238f4ed net: hns3: fix return of random stack value
Currently, a random stack value is being returned because variable
_ret_ is not properly initialized. This variable is actually not
used anymore and it should be removed.

Fix this by removing all instances of variable ret and return 0.

Fixes: 64749c9c38 ("net: hns3: remove redundant return value of hns3_uninit_all_ring()")
Addresses-Coverity-ID: 1501700 ("Uninitialized scalar variable")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:22:13 -08:00
Nobuhiro Iwamatsu
0d645232dd net: stmmac: dwmac-intel-plat: remove unnecessary initialization
plat_dat is initialized by stmmac_probe_config_dt().
So, initialization is not required by priv->plat.
This removes unnecessary initialization and variables.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:21:15 -08:00
Eric Dumazet
1d1be91254 tcp: fix tcp_rmem documentation
tcp_rmem[1] has been changed to 131072, we should update the documentation
to reflect this.

Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Zhibin Liu <zhibinliu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:15:47 -08:00
Eric Dumazet
3d368ab87c net: initialize net->net_cookie at netns setup
It is simpler to make net->net_cookie a plain u64
written once in setup_net() instead of looping
and using atomic64 helpers.

Lorenz Bauer wants to add SO_NETNS_COOKIE socket option
and this patch would makes his patch series simpler.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Lorenz Bauer <lmb@cloudflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:10:07 -08:00
Heiner Kallweit
06e56697bd r8169: re-configure WOL settings on resume from hibernation
So far we don't re-configure WOL-related register bits when waking up
from hibernation. I'm not aware of any problem reports, but better
play safe and call __rtl8169_set_wol() in the resume() path too.
To achieve this move calling __rtl8169_set_wol() to
rtl8169_net_resume() and rename the function to rtl8169_runtime_resume().

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 14:08:51 -08:00
David S. Miller
50d3da756c Merge branch 'phy-icplus-next'
Michael Walle says:

====================
net: phy: icplus: cleanups and new features

Cleanup the PHY drivers for IPplus devices and add PHY counters and MDIX
support for the IP101A/G.

Patch 5 adds a model detection based on the behavior of the PHY.
Unfortunately, the IP101A shares the PHY ID with the IP101G. But the latter
provides more features. Try to detect the newer model by accessing the page
selection register. If it is writeable, it is assumed, that it is a IP101G.

With this detection in place, we can now access registers >= 16 in a
correct way on the IP101G; that is by first selecting the correct page.
This might previouly worked, because no one ever set another active page
before booting linux.

The last two patches add the new features.
===================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:26 -08:00
Michael Walle
32ab60e539 net: phy: icplus: add MDI/MDIX support for IP101A/G
Implement the operations to set desired mode and retrieve the current
mode.

This feature was tested with an IP101G.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:26 -08:00
Michael Walle
a0750d42e9 net: phy: icplus: add PHY counter for IP101G
The IP101G provides three counters: RX packets, CRC errors and symbol
errors. The error counters can be configured to clear automatically on
read. Unfortunately, this isn't true for the RX packet counter. Because
of this and because the RX packet counter is more likely to overflow,
than the error counters implement only support for the error counters.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:26 -08:00
Michael Walle
f9bc51e6cc net: phy: icplus: fix paged register access
Registers >= 16 are paged. Be sure to set the page. It seems this was
working for now, because the default is correct for the registers used
in the driver at the moment. But this will also assume, nobody will
change the page select register before linux is started. The page select
register is _not_ reset with a soft reset of the PHY.

To ease the function reuse between the non-paged register space of the
IP101A and the IP101G, add noop read_page()/write_page() callbacks so
the IP101G functions can also be used for the IP101A.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:26 -08:00
Michael Walle
eeac7d43d4 net: phy: icplus: don't set APS_EN bit on IP101G
This bit is reserved as 'always-write-1'. While this is not a particular
error, because we are only setting it, guard it by checking the model to
prevent errors in the future.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:25 -08:00
Michael Walle
675115bf8c net: phy: icplus: split IP101A/G driver
Unfortunately, the IP101A and IP101G share the same PHY identifier.
While most of the functions are somewhat backwards compatible, there is
for example the APS_EN bit on the IP101A but on the IP101G this bit
reserved. Also, the IP101G has many more functionalities.

Deduce the model by accessing the page select register which - according
to the datasheet - is not available on the IP101A. If this register is
writable, assume we have an IP101G.

Split the combined IP101A/G driver into two separate drivers.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:25 -08:00
Michael Walle
df22de9a6f net: phy: icplus: use the .soft_reset() of the phy-core
The PHY core already resets the PHY before .config_init() if a
.soft_reset() op is registered. Drop the open-coded ip1xx_reset().

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:25 -08:00
Michael Walle
8edf206cc2 net: phy: icplus: drop address operator for functions
Don't sometimes use the address operator and sometimes not. Drop it and
make the code look uniform.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:25 -08:00
Michael Walle
7360a4de36 net: phy: icplus: use PHY_ID_MATCH_EXACT() for IP101A/G
According to the datasheet of the IP101A/G there is no revision field
and MII_PHYSID2 always reads as 0x0c54. Use PHY_ID_MATCH_EXACT() then.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:25 -08:00
Michael Walle
2ad4758cec net: phy: icplus: use PHY_ID_MATCH_MODEL() macro
Simpify the initializations of the structures. There is no functional
change.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:53:25 -08:00
Masami Hiramatsu
a345a6718b tracing: Add ptr-hash option to show the hashed pointer value
Add tracefs/options/hash-ptr option to show hashed pointer
value by %p in event printk format string.

For the security reason, normal printk will show the hashed
pointer value (encrypted by random number) with %p to printk
buffer to hide the real address. But the tracefs/trace always
shows real address for debug. To bridge those outputs, add an
option to switch the output format. Ftrace users can use it
to find the hashed value corresponding to the real address
in trace log.

Link: https://lkml.kernel.org/r/160277372504.29307.14909828808982012211.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-11 16:31:57 -05:00
Masami Hiramatsu
1600cbcf69 tracing: Update the stage 3 of trace event macro comment
Update the comment of the 3rd stage of trace event macro
expansion code. Now there are 2 macros makes different
trace_raw_output_<call>() functions.

Link: https://lkml.kernel.org/r/160277371605.29307.8586817119278606720.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-11 16:31:57 -05:00
Masami Hiramatsu
efbbdaa22b tracing: Show real address for trace event arguments
To help debugging kernel, show real address for trace event arguments
in tracefs/trace{,pipe} instead of hashed pointer value.

Since ftrace human-readable format uses vsprintf(), all %p are
translated to hash values instead of pointer address.

However, when debugging the kernel, raw address value gives a
hint when comparing with the memory mapping in the kernel.
(Those are sometimes used with crash log, which is not hashed too)
So converting %p with %px when calling trace_seq_printf().

Moreover, this is not improving the security because the tracefs
can be used only by root user and the raw address values are readable
from tracefs/percpu/cpu*/trace_pipe_raw file.

Link: https://lkml.kernel.org/r/160277370703.29307.5134475491761971203.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-02-11 16:31:57 -05:00
David S. Miller
e345e58ae4 Merge branch 'dsa-hsr-offload'
George McCollister says:

====================
add HSR offloading support for DSA switches

Add support for offloading HSR/PRP (IEC 62439-3) tag insertion, tag
removal, forwarding and duplication on DSA switches.
This series adds offloading to the xrs700x DSA driver.

Changes since RFC:
 * Split hsr and dsa patches. (Florian Fainelli)

Changes since v1:
 * Fixed some typos/wording. (Vladimir Oltean)
 * eliminate IFF_HSR and use is_hsr_master instead. (Vladimir Oltean)
 * Make hsr_handle_sup_frame handle skb_std as well (required when offloading)
 * Don't add hsr tag for HSR v0 supervisory frames.
 * Fixed tag insertion offloading for PRP.

Changes since v2:
 * Return -EOPNOTSUPP instead of 0 in dsa_switch_hsr_join and
   dsa_switch_hsr_leave. (Vladimir Oltean)
 * Only allow ports 1 and 2 to be HSR/PRP redundant ports. (Tobias Waldekranz)
 * Set and remove HSR features for both redundant ports. (Vladimir Oltean)
 * Change port_hsr_leave() to return int instead of void.
 * Remove hsr_init_skb() proto argument. (Vladimir Oltean)
===================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:24:45 -08:00
George McCollister
bd62e6f5e6 net: dsa: xrs700x: add HSR offloading support
Add offloading for HSR/PRP (IEC 62439-3) tag insertion, tag removal
forwarding and duplication supported by the xrs7000 series switches.

Only HSR v1 and PRP v1 are supported by the xrs7000 series switches (HSR
v0 is not).

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:24:45 -08:00
George McCollister
18596f504a net: dsa: add support for offloading HSR
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding on DSA switches.

Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls
to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch.

The DSA switch driver should then set netdev feature flags for the
HSR/PRP operation that it offloads.
    NETIF_F_HW_HSR_TAG_INS
    NETIF_F_HW_HSR_TAG_RM
    NETIF_F_HW_HSR_FWD
    NETIF_F_HW_HSR_DUP

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:24:45 -08:00
George McCollister
dcf0cd1cc5 net: hsr: add offloading support
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.

For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.

Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).

Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.

Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.

Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:24:44 -08:00
George McCollister
78be9217c4 net: hsr: generate supervision frame without HSR/PRP tag
For a switch to offload insertion of HSR/PRP tags, frames must not be
sent to the CPU facing switch port with a tag. Generate supervision frames
(eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on
create_tagged_frame which inserts it later. This will allow skipping the
tag insertion for all outgoing frames in the future which is required for
HSR v1/PRP tag insertions to be offloaded.

HSR v0 supervision frames always contain tag information so insertion of
the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically
notes that this was changed since v0 to allow offloading.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11 13:24:44 -08:00
Martin Liška
1f0e6edcd9 perf annotate: Fix jump parsing for C++ code.
Considering the following testcase:

  int
  foo(int a, int b)
  {
     for (unsigned i = 0; i < 1000000000; i++)
       a += b;
     return a;
  }

  int main()
  {
     foo (3, 4);
     return 0;
  }

'perf annotate' displays:

  86.52 │40055e: → ja   40056c <foo(int, int)+0x26>
  13.37 │400560:   mov  -0x18(%rbp),%eax
        │400563:   add  %eax,-0x14(%rbp)
        │400566:   addl $0x1,-0x4(%rbp)
   0.11 │40056a: → jmp  400557 <foo(int, int)+0x11>
        │40056c:   mov  -0x14(%rbp),%eax
        │40056f:   pop  %rbp

and the 'ja 40056c' does not link to the location in the function.  It's
caused by fact that comma is wrongly parsed, it's part of function
signature.

With my patch I see:

  86.52 │   ┌──ja   26
  13.37 │   │  mov  -0x18(%rbp),%eax
        │   │  add  %eax,-0x14(%rbp)
        │   │  addl $0x1,-0x4(%rbp)
   0.11 │   │↑ jmp  11
        │26:└─→mov  -0x14(%rbp),%eax

and 'o' output prints:

  86.52 │4005┌── ↓ ja   40056c <foo(int, int)+0x26>
  13.37 │4005│0:   mov  -0x18(%rbp),%eax
        │4005│3:   add  %eax,-0x14(%rbp)
        │4005│6:   addl $0x1,-0x4(%rbp)
   0.11 │4005│a: ↑ jmp  400557 <foo(int, int)+0x11>
        │4005└─→   mov  -0x14(%rbp),%eax

On the contrary, compiling the very same file with gcc -x c, the parsing
is fine because function arguments are not displayed:

  jmp  400543 <foo+0x1d>

Committer testing:

Before:

  $ cat cpp_args_annotate.c
  int
  foo(int a, int b)
  {
     for (unsigned i = 0; i < 1000000000; i++)
       a += b;
     return a;
  }

  int main()
  {
     foo (3, 4);
     return 0;
  }
  $ gcc --version |& head -1
  gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9)
  $ gcc -g cpp_args_annotate.c -o cpp_args_annotate
  $ perf record ./cpp_args_annotate
  [ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.275 MB perf.data (7188 samples) ]
  $ perf annotate --stdio2 foo
  Samples: 7K of event 'cycles:u', 4000 Hz, Event count (approx.): 7468429289, [percent: local period]
  foo() /home/acme/c/cpp_args_annotate
  Percent
              0000000000401106 <foo>:
              foo():
              int
              foo(int a, int b)
              {
                push %rbp
                mov  %rsp,%rbp
                mov  %edi,-0x14(%rbp)
                mov  %esi,-0x18(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                movl $0x0,-0x4(%rbp)
              ↓ jmp  1d
              a += b;
   13.45  13:   mov  -0x18(%rbp),%eax
                add  %eax,-0x14(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                addl $0x1,-0x4(%rbp)
    0.09  1d:   cmpl $0x3b9ac9ff,-0x4(%rbp)
   86.46      ↑ jbe  13
              return a;
                mov  -0x14(%rbp),%eax
              }
                pop  %rbp
              ← retq
  $

I.e. works for C, now lets switch to C++:

  $ g++ -g cpp_args_annotate.c -o cpp_args_annotate
  $ perf record ./cpp_args_annotate
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.268 MB perf.data (6976 samples) ]
  $ perf annotate --stdio2 foo
  Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
  foo() /home/acme/c/cpp_args_annotate
  Percent
              0000000000401106 <foo(int, int)>:
              foo(int, int):
              int
              foo(int a, int b)
              {
                push %rbp
                mov  %rsp,%rbp
                mov  %edi,-0x14(%rbp)
                mov  %esi,-0x18(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                movl $0x0,-0x4(%rbp)
                cmpl $0x3b9ac9ff,-0x4(%rbp)
   86.53      → ja   40112c <foo(int, int)+0x26>
              a += b;
   13.32        mov  -0x18(%rbp),%eax
    0.00        add  %eax,-0x14(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                addl $0x1,-0x4(%rbp)
    0.15      → jmp  401117 <foo(int, int)+0x11>
              return a;
                mov  -0x14(%rbp),%eax
              }
                pop  %rbp
              ← retq
  $

Reproduced.

Now with this patch:

Reusing the C++ built binary, as we can see here:

  $ readelf -wi cpp_args_annotate | grep producer
    <c>   DW_AT_producer    : (indirect string, offset: 0x2e): GNU C++14 10.2.1 20201125 (Red Hat 10.2.1-9) -mtune=generic -march=x86-64 -g
  $

And furthermore:

  $ file cpp_args_annotate
  cpp_args_annotate: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=4fe3cab260204765605ec630d0dc7a7e93c361a9, for GNU/Linux 3.2.0, with debug_info, not stripped
  $ perf buildid-list -i cpp_args_annotate
  4fe3cab260204765605ec630d0dc7a7e93c361a9
  $ perf buildid-list | grep cpp_args_annotate
  4fe3cab260204765605ec630d0dc7a7e93c361a9 /home/acme/c/cpp_args_annotate
  $

It now works:

  $ perf annotate --stdio2 foo
  Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
  foo() /home/acme/c/cpp_args_annotate
  Percent
              0000000000401106 <foo(int, int)>:
              foo(int, int):
              int
              foo(int a, int b)
              {
                push %rbp
                mov  %rsp,%rbp
                mov  %edi,-0x14(%rbp)
                mov  %esi,-0x18(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                movl $0x0,-0x4(%rbp)
          11:   cmpl $0x3b9ac9ff,-0x4(%rbp)
   86.53      ↓ ja   26
              a += b;
   13.32        mov  -0x18(%rbp),%eax
    0.00        add  %eax,-0x14(%rbp)
              for (unsigned i = 0; i < 1000000000; i++)
                addl $0x1,-0x4(%rbp)
    0.15      ↑ jmp  11
              return a;
          26:   mov  -0x14(%rbp),%eax
              }
                pop  %rbp
              ← retq
  $

Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lore.kernel.org/lkml/13e1a405-edf9-e4c2-4327-a9b454353730@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-11 18:23:53 -03:00