Commit graph

996,399 commits

Author SHA1 Message Date
Pierre-Louis Bossart
973794e856 soundwire: bus: fix confusion on device used by pm_runtime
Intel stress-tests routinely report IO timeouts and invalid power
management transitions. Upon further analysis, we seem to be using the
wrong devices in pm_runtime calls.

Before reading and writing registers, we first need to make sure the
Slave is fully resumed. The existing code attempts to do such that,
however because of a confusion dating from 2017 and copy/paste, we
end-up resuming the parent only instead of resuming the codec device.

This can lead to accesses to the Slave registers while the bus is
still being configured and the Slave not enumerated, and as a result
IO errors occur.

This is a classic problem, similar confusions happened for HDaudio
between bus and codec device, leading to power management issues.

Fix by using the relevant device for all uses of pm_runtime functions.

Fixes: 60ee9be255 ('soundwire: bus: add PM/no-PM versions of read/write functions')
Fixes: aa79293517 ('soundwire: bus: fix io error when processing alert event')
Fixes: 9d715fa005 ('soundwire: Add IO transfer')
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210122070634.12825-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-07 17:49:16 +05:30
Bard Liao
167790abb9 soundwire: export sdw_write/read_no_pm functions
sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO
without touching PM.

Fixes: 0231453bc0 ('soundwire: bus: add clock stop helpers')
Fixes: 60ee9be255 ('soundwire: bus: add PM/no-PM versions of read/write functions')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-07 17:49:11 +05:30
Kumar Kartikeya Dwivedi
eac859b84e staging: emxx_udc: Make incorrectly defined global static
The global gpio_desc pointer and int vbus_irq were defined in the header,
instead put the definitions in the translation unit and make them static as
there's only a single consumer, and these symbols shouldn't pollute the
global namespace.

This fixes the following sparse warnings for this driver:
drivers/staging/emxx_udc/emxx_udc.c: note: in included file:
drivers/staging/emxx_udc/emxx_udc.h:23:18: warning: symbol 'vbus_gpio' was not
declared. Should it be static?  drivers/staging/emxx_udc/emxx_udc.h:24:5:
warning: symbol 'vbus_irq' was not declared. Should it be static?

Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20210207085911.270746-1-memxor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-07 10:15:05 +01:00
Phillip Potter
f2d4eef539 staging: octeon: remove braces from single-line block
This removes the braces from the if statement that checks the
physical node return value in cvm_oct_phy_setup_device, as this
block contains only one statement. Fixes a style warning.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210206201701.5273-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-07 10:05:29 +01:00
Jiapeng Chong
c237813e3a ALSA: azt3328: Assign boolean values to a bool variable
Fix the following coccicheck warnings:

./sound/pci/azt3328.c:2451:2-16: WARNING: Assignment of 0/1 to bool
variable.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/1612681361-63404-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-02-07 09:49:04 +01:00
Jakub Kicinski
badc6ac321 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-02-05

This series contains updates to ice driver only.

Jake adds adds reporting of timeout length during devlink flash and
implements support to report devlink info regarding the version of
firmware that is stored (downloaded) to the device, but is not yet active.
ice_devlink_info_get will report "stored" versions when there is no
pending flash update. Version info includes the UNDI Option ROM, the
Netlist module, and the fw.bundle_id.

Gustavo A. R. Silva replaces a one-element array to flexible-array
member.

Bruce utilizes flex_array_size() helper and removes dead code on a check
for a condition that can't occur.

v2:
* removed security revision implementation, and re-ordered patches to
account for this removal
* squashed patches implementing ice_read_flash_module to avoid patches
refactoring the implementation of a previous patch in the series
* modify ice_devlink_info_get to always report "stored" versions instead
of only reporting them when a pending flash update is ready.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: remove dead code
  ice: use flex_array_size where possible
  ice: Replace one-element array with flexible-array member
  ice: display stored UNDI firmware version via devlink info
  ice: display stored netlist versions via devlink info
  ice: display some stored NVM versions via devlink info
  ice: introduce function for reading from flash modules
  ice: cache NVM module bank information
  ice: introduce context struct for info report
  ice: create flash_info structure and separate NVM version
  ice: report timeout length for erasing during devlink flash
====================

Link: https://lore.kernel.org/r/20210206044101.636242-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 16:10:19 -08:00
Jakub Kicinski
c273a20c30 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next
Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

1) Remove indirection and use nf_ct_get() instead from nfnetlink_log
   and nfnetlink_queue, from Florian Westphal.

2) Add weighted random twos choice least-connection scheduling for IPVS,
   from Darby Payne.

3) Add a __hash placeholder in the flow tuple structure to identify
   the field to be included in the rhashtable key hash calculation.

4) Add a new nft_parse_register_load() and nft_parse_register_store()
   to consolidate register load and store in the core.

5) Statify nft_parse_register() since it has no more module clients.

6) Remove redundant assignment in nft_cmp, from Colin Ian King.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next:
  netfilter: nftables: remove redundant assignment of variable err
  netfilter: nftables: statify nft_parse_register()
  netfilter: nftables: add nft_parse_register_store() and use it
  netfilter: nftables: add nft_parse_register_load() and use it
  netfilter: flowtable: add hash offset field to tuple
  ipvs: add weighted random twos choice algorithm
  netfilter: ctnetlink: remove get_ct indirection
====================

Link: https://lore.kernel.org/r/20210206015005.23037-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:34:23 -08:00
Linus Torvalds
825b5991a4 3 small smb3 fixes for stable
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmAeJkgACgkQiiy9cAdy
 T1EXAwv+IMIPxilkjjArn/36IG9pFBwMHtsQUojGf4dhUesL5DQzSraaRu2aYDPB
 wdNnyuLHb7UUA6khramQnAr+eQ3O1nrCzHHgGK6RQk1tDlMqTZiR51cPLF67AVqA
 Jg2Q+KlSzdPUea1G8iv61pnD6y7bAufEklNXk1Xbq9mPd81y3gfGi5bM6tKwy1a/
 pYhHsko/2n1C6NO5d24yrKjXj2rRobY8XJ0UOHax+D5VxKfZ+5ub0sulq8UEg4ki
 8BztAwkYwwU87QzkKTD8imDfAzAKyvKIQM/idrkyt1ZVkf6HdwM+EKZWbEY0G9Mv
 u8y+E7cjT17jTtkthm2bfaubWepWkc1STxmFiEp3Xy7+HDRc1UUGY/wgHObzaDLo
 P3V/G/XGCn8AJuLkpsx1iO5Cee2CHEtMCaDbCBgAnrSBxcLxqtXKOCrGXMARSRaP
 ylUl94Ek9QGlG7YAGklcsNO896vWMNfstRUtFZBD68SV44Pam333ZBfOJ5fv0Xuy
 svG0qcr8
 =5FIb
 -----END PGP SIGNATURE-----

Merge tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Three small smb3 fixes for stable"

* tag '5.11-rc6-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: report error instead of invalid when revalidating a dentry fails
  smb3: fix crediting for compounding when only one request in flight
  smb3: Fix out-of-bounds bug in SMB2_negotiate()
2021-02-06 15:26:28 -08:00
Linus Torvalds
f7455e5d68 RISC-V Fixes for 5.11-rc7
I have a handful of fixes for this week:
 
 * A fix to avoid evalating the VA twice in virt_addr_valid, which fixes
   some WARNs under DEBUG_VIRTUAL.
 * Two fixes related to STRICT_KERNEL_RWX: one that fixes some
   permissions when strict is disabled, and one to fix some alignment
   issues when strict is enabled.
 * A fix to disallow the selection of MAXPHYSMEM_2GB on RV32, which isn't
   valid any more but may still show up in some oldconfigs.
 
 We still have the HiFive Unleashed ethernet phy reset regression, so
 there will likely be something coming next week.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmAe7xUTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiQZqD/9ebojeOMusNtAU9Lelz9edLbpMlZ95
 vFxHUD44GmWl6qWCAUAi6rNve8V6yokYNbqqFhZxzKyhnKBqsHBj1vZWnPrne7pB
 bliBvQjlQ6gv7u1Dz+o7+fya1K41jVzKCht4bQqqU8wzVMlo0HIaaeKXfqdSwkZh
 xYEn4D0kI+RqvkM13CkYdPmWuSdhWr5cOlzNvuMssb7RuP6DTx3C/GDomJA59M0u
 tw/FNtSx1Y/PGg+FKoo0DkMqOurjOXZ26/DrroA1ZDO2baqVyrcxjwpqb2FH1FNN
 8PRDROcs22/QEeq0yTwtN6ZYOZoL8MXQslryAAHWbD/nSkM6yR+Tkw3rF+gl2yhH
 ZHq0HtYoemBCfKn1WD2yS8g1UNRN60gKd1+gGREajxFOulDs1Qw0bAWf34aD4Ai8
 1lochKU0eavs0SoP5rb2RLeCpm0o7UOwoaSNSzv+XQTfUuguIXCXHRX2BW0VLero
 RNsz8WF/4g0iRv70JvSyQXnKZed3cEQYcu1JzhE/hxRGaQDsqPDJ1GL7Wx1X5xBF
 0zPGKtfUPfcXAkuyOtkhGrT+HqmNARxZJRV/W67tJ7b0+Cz3L0W98dPMClNlTcwW
 L/Kz00QXW4TBW09Xo1JXq7v+9Z074IRFF26lDZl/jLWarh4F/ii1cGBmMwLtP8rw
 0BJAGFlYP7/Pmw==
 =uPAF
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
 "A handful of fixes for this week:

   - A fix to avoid evalating the VA twice in virt_addr_valid, which
     fixes some WARNs under DEBUG_VIRTUAL.

   - Two fixes related to STRICT_KERNEL_RWX: one that fixes some
     permissions when strict is disabled, and one to fix some alignment
     issues when strict is enabled.

   - A fix to disallow the selection of MAXPHYSMEM_2GB on RV32, which
     isn't valid any more but may still show up in some oldconfigs.

  We still have the HiFive Unleashed ethernet phy reset regression, so
  there will likely be something coming next week"

* tag 'riscv-for-linus-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Define MAXPHYSMEM_1GB only for RV32
  riscv: Align on L1_CACHE_BYTES when STRICT_KERNEL_RWX
  RISC-V: Fix .init section permission update
  riscv: virt_addr_valid must check the address belongs to linear mapping
2021-02-06 15:18:10 -08:00
Linus Torvalds
f06279ea19 powerpc fixes for 5.11 #7
A fix for a change we made to __kernel_sigtramp_rt64() which confused glibc's
 backtrace logic, and also changed the semantics of that symbol, which was
 arguably an ABI break.
 
 A fix for a stack overwrite in our VSX instruction emulation.
 
 A couple of fixes for the Makefile logic in the new C VDSO.
 
 Thanks to: Masahiro Yamada, Naveen N. Rao, Raoni Fassina Firmino, Ravi Bangoria.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmAeizITHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgGHfD/0VIRjDzg+kZqZu4kAJw5msozT+g7IS
 q32PEImssin0TlSg7ZDFToCWuRi0h1WRhVOyFLfTG173MXzy1lIyN9Kv0wfa3LDq
 SdSPRFFYAneIA0azZU8wXqqjf+VFAod9Nj0A4uFi7Im0vqFZb2IyovzjS9xHJemp
 yObb4LB14eS/HPc40ONGlQAbn27hXbdK2mBadW7cAjQ2UFDnL3I+MwOHf9w5GF7D
 9/KMoz81Y9xEUVcnUDdc0Kg+/irSGyuw2ydZwMAErzNQSHh2KqV1/iLnFKinHfj3
 3wST5WNq53+w+oyg5Nt5CKxRLYSLdAJsVvEZ4l6Ac/yIHzyvlwGr3q90lmleW0/H
 kAsYySB4FhWffpcyRS2mfMsR/VOCj7m92JUTMK1J2XOsIOARB6BRmGW7wRYvX5Mw
 q2DCkHulH/RWQBxtklCDtdcsk818UlZRdGgy6fTQXi3cfOeOnIfvP4+4JPSQ0sOW
 SMh3zRMxJRb5IIMU402VwtrpRYNZUCCCv2ueYjQOPI8I0oheQNT7U49vLvzaFru1
 Idrh1JcbNdaFG7o+BN0a/7VwfOikbRoPyewH5hjMPUomQMaxPuZdsAPa5OdIaSMv
 RhaIAY5YSMUt3C+Wk/1h7+gxFRj1jNCvdoFtp9r7GBVun9OqZj/jqHApIOPRnc3+
 QDGwMpF/VIbllg==
 =x3mB
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - A fix for a change we made to __kernel_sigtramp_rt64() which confused
   glibc's backtrace logic, and also changed the semantics of that
   symbol, which was arguably an ABI break.

 - A fix for a stack overwrite in our VSX instruction emulation.

 - A couple of fixes for the Makefile logic in the new C VDSO.

Thanks to Masahiro Yamada, Naveen N.  Rao, Raoni Fassina Firmino, and
Ravi Bangoria.

* tag 'powerpc-5.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64/signal: Fix regression in __kernel_sigtramp_rt64() semantics
  powerpc/vdso64: remove meaningless vgettimeofday.o build rule
  powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o
  powerpc/sstep: Fix array out of bound warning
2021-02-06 15:14:39 -08:00
Heiner Kallweit
7274c4147a r8169: don't try to disable interrupts if NAPI is scheduled already
There's no benefit in trying to disable interrupts if NAPI is
scheduled already. This allows us to save a PCI write in this case.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/78c7f2fb-9772-1015-8c1d-632cbdff253f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:12:39 -08:00
Linus Torvalds
4a7859ea09 ARM fixes for 5.11:
- Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
   accessors that affects GCC >= 4.9.2
 - Fix misplaced tegra_uart_config in decompressor
 - Ensure signal page contents are initialised
 - Fix kexec oops
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuNNh8scc2k/wOAE+9OeQG+StrGQFAmAdHmUACgkQ9OeQG+St
 rGTctQ/8Dlwc3G40ziB7WgaSTKsx809e5rLmoT5EvzyCuuHy6wDIbtmmY+hb7HUU
 h1bys4epWYwbiYHsDDfGWKJy+qHA1sBfZunJdRVE0O/v1x5vMkLruyC8oh0NtplS
 LRj2HReK6oIuNFA/ywa30xcWvw/BnpM+saoptXQhdsuy26QNirUqQYsq/E2mMkBG
 Sq9KMtncxw3R1o4ahgJcDAQ7PtvKZIzkEym7gtF/PhaTuiDhmDCOMzVQwikGmgnw
 ci8Mtzvses6segdCrYGr+4f7G+D7LhEprXLCbpwT5tCoEXXTQ1SIQPIvTjX0qMip
 UpZ7gP+x7eQZTWv+OnKfgRf4pOC3sqKDth3glrYVJWBzoC7faW1KrY5ugpf4OmQ8
 /IKd33PUMmm+a0eHBX/Z/ZZplzIJn81O1gBswG3zfjSCw1xa53QlfZlWEhgttZmN
 aqTnaP5dcp0mlyOkvju4AcdQ9xBxdBlCQimSRDkCy3FPjgpwlw4zNVPhnYaoK7En
 sguTGXI8MXAB6MpxGom5oPQw+GtUngyZIrQlk6PbXpmfBUmqAOhRVg6TbyvbgMIy
 5i+CVyp3tIzFpY19pSnpNhbzTgnmybBRY0BqFBg8KH0s1r2SyxhhmqSm00bIw4Cf
 rNuLQtEy4YEVOdcmKlwX9sxUBUo/M27ZXkx7u96+QLapKAFyTb8=
 =V/Oi
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:

 - Fix latent bug with DC21285 (Footbridge PCI bridge) configuration
   accessors that affects GCC >= 4.9.2

 - Fix misplaced tegra_uart_config in decompressor

 - Ensure signal page contents are initialised

 - Fix kexec oops

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: kexec: fix oops after TLB are invalidated
  ARM: ensure the signal page contains defined contents
  ARM: 9043/1: tegra: Fix misplaced tegra_uart_config in decompressor
  ARM: footbridge: fix dc21285 PCI configuration accessors
2021-02-06 15:07:51 -08:00
Shay Agroskin
225353c070 net: ena: Update XDP verdict upon failure
The verdict returned from ena_xdp_execute() is used to determine the
fate of the RX buffer's page. In case of XDP Redirect/TX error the
verdict should be set to XDP_ABORTED, otherwise the page won't be freed.

Fixes: a318c70ad1 ("net: ena: introduce XDP redirect implementation")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:07:29 -08:00
Norbert Slusarek
3d0bc44d39 net/vmw_vsock: improve locking in vsock_connect_timeout()
A possible locking issue in vsock_connect_timeout() was recognized by
Eric Dumazet which might cause a null pointer dereference in
vsock_transport_cancel_pkt(). This patch assures that
vsock_transport_cancel_pkt() will be called within the lock, so a race
condition won't occur which could result in vsk->transport to be set to NULL.

Fixes: 380feae0de ("vsock: cancel packets when failing to connect")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-f8e0937a-cf0e-4d80-a76e-d9a958ba3ef1-1612535522360@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:03:31 -08:00
Norbert Slusarek
5d1cbcc990 net/vmw_vsock: fix NULL pointer dereference
In vsock_stream_connect(), a thread will enter schedule_timeout().
While being scheduled out, another thread can enter vsock_stream_connect()
as well and set vsk->transport to NULL. In case a signal was sent, the
first thread can leave schedule_timeout() and vsock_transport_cancel_pkt()
will be called right after. Inside vsock_transport_cancel_pkt(), a null
dereference will happen on transport->cancel_pkt.

Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Signed-off-by: Norbert Slusarek <nslusarek@gmx.net>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/trinity-c2d6cede-bfb1-44e2-85af-1fbc7f541715-1612535117028@3c-app-gmx-bap12
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 15:03:17 -08:00
Xie He
21c85974aa net/packet: Improve the comment about LL header visibility criteria
The "dev_has_header" function, recently added in
commit d549699048 ("net/packet: fix packet receive on L3 devices
without visible hard header"),
is more accurate as criteria for determining whether a device exposes
the LL header to upper layers, because in addition to dev->header_ops,
it also checks for dev->header_ops->create.

When transmitting an skb on a device, dev_hard_header can be called to
generate an LL header. dev_hard_header will only generate a header if
dev->header_ops->create is present.

Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20210205224124.21345-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:59:28 -08:00
Linus Torvalds
368afecbfb USB fixes for 5.11-rc7
Here are some small, last-minute, USB driver fixes for 5.11-rc7
 
 They all resolve issues reported, or are a few new device ids for some
 drivers.  They include:
 	- new device ids for some usb-serial drivers
 	- xhci fixes for a variety of reported problems
 	- dwc3 driver bugfixes
 	- dwc2 driver bugfixes
 	- usblp driver bugfix
 	- thunderbolt bugfix
 	- few other tiny fixes
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYB6mPw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yk7QgCcC948UTZcM6GtJK7BZtVStNENRqsAn3pvFR3Y
 m7Qv7knWxULL6UNWVsTw
 =83YY
 -----END PGP SIGNATURE-----

Merge tag 'usb-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small, last-minute, USB driver fixes for 5.11-rc7

  They all resolve issues reported, or are a few new device ids for some
  drivers. They include:

   - new device ids for some usb-serial drivers

   - xhci fixes for a variety of reported problems

   - dwc3 driver bugfixes

   - dwc2 driver bugfixes

   - usblp driver bugfix

   - thunderbolt bugfix

   - few other tiny fixes

  All have been in linux-next with no reported issues"

* tag 'usb-5.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: dwc2: Fix endpoint direction check in ep_from_windex
  usb: dwc3: fix clock issue during resume in OTG mode
  xhci: fix bounce buffer usage for non-sg list case
  usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720
  usb: xhci-mtk: break loop when find the endpoint to drop
  usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints
  usb: renesas_usbhs: Clear pipe running flag in usbhs_pkt_pop()
  USB: gadget: legacy: fix an error code in eth_bind()
  thunderbolt: Fix possible NULL pointer dereference in tb_acpi_add_link()
  USB: serial: option: Adding support for Cinterion MV31
  usb: xhci-mtk: fix unreleased bandwidth data
  usb: gadget: aspeed: add missing of_node_put
  USB: usblp: don't call usb_set_interface if there's a single alt
  USB: serial: cp210x: add pid/vid for WSDA-200-USB
  USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000
2021-02-06 14:59:07 -08:00
Linus Torvalds
7c2d18357f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Nothing terribly interesting, just a few fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - sync supported devices with fork on GitHub
  Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_table
  Input: goodix - add support for Goodix GT9286 chip
  dt-bindings: input: touchscreen: goodix: Add binding for GT9286 IC
  dt-bindings: input: adc-keys: clarify description
  Input: ili210x - implement pressure reporting for ILI251x
  Input: i8042 - unbreak Pegatron C15B
  Input: st1232 - wait until device is ready before reading resolution
  Input: st1232 - do not read more bytes than needed
  Input: st1232 - fix off-by-one error in resolution handling
2021-02-06 14:57:23 -08:00
Jakub Kicinski
163a180213 Merge branch 'net-ipa-a-mix-of-small-improvements'
Alex Elder says:

====================
net: ipa: a mix of small improvements

Version 2 of this series restructures a couple of the changed
functions (in patches 1 and 2) to avoid blocks of indented code
by returning early when possible, as suggested by Jakub.  The
description of the first patch was changed as a result, to better
reflect what the updated patch does.  It also fixes one spot I
identified when updating the code, where gsi_channel_stop() was
doing the wrong thing on error.

The original description for this series is below.

This series contains a sort of unrelated set of code cleanups.

The first two are things I wanted to do in a series that updated
some NAPI code recently.  I didn't want to change things in a way
that affected existing testing so I set these aside for later
(i.e., now).

The third makes a change to event ring handling that's similar to
what was done a while back for channels.  There's little benefit to
cacheing the current state of an event ring, so with this we'll just
fetch the state from hardware whenever we need it.

The fourth patch removes the definitions of two unused symbols.

The fifth replaces a count that is always 0 or 1 with a Boolean.

The sixth removes a build-time validation check that doesn't really
provide benefit.

And the last one fixes a problem (in two spots) that could cause a
build-time check to fail "bogusly".
====================

Link: https://lore.kernel.org/r/20210205221100.1738-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:20 -08:00
Alex Elder
cd1150098f net: ipa: avoid field overflow
It's possible that the length passed to ipa_header_size_encoded()
is larger than what can be represented by the HDR_LEN field alone
(starting with IPA v4.5).  If we attempted that, u32_encode_bits()
would trigger a build-time error.

Avoid this problem by masking off high-order bits of the value
encoded as the lower portion of the header length.

The same sort of problem exists in ipa_metadata_offset_encoded(),
so implement the same fix there.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:20 -08:00
Alex Elder
4873537430 net: ipa: get rid of status size constraint
There is a build-time check that the packet status structure is a
multiple of 4 bytes in size.  It's not clear where that constraint
comes from, but the structure defines what hardware provides so its
definition won't change.  Get rid of the check; it adds no value.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:19 -08:00
Alex Elder
9af5ccf323 net: ipa: use a Boolean rather than count when replenishing
The count argument to ipa_endpoint_replenish() is only ever 0 or 1,
and always will be (because we always handle each receive buffer in
a single transaction).  Rename the argument to be add_one and change
it to be Boolean.

Update the function description to reflect the current code.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:19 -08:00
Alex Elder
d5bc5015eb net: ipa: remove two unused register definitions
We do not support inter-EE channel or event ring commands.  Inter-EE
interrupts are disabled (and never re-enabled) for all channels and
event rings, so we have no need for the GSI registers that clear
those interrupt conditions.  So remove their definitions.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:18 -08:00
Alex Elder
3f77c926f6 net: ipa: do not cache event ring state
An event ring's state only needs to be known when it is allocated,
reset, or deallocated.  We check an event ring's state both before
and after performing an event ring control command that changes
its state.  These are only issued at startup and shutdown, so there
is very little value in caching the state.

Stop recording a copy of the channel's last known state, and instead
fetch the true state from hardware whenever it's needed.  In such
cases, *do* record the state in a local variable, in case an error
message reports it (so the value reported is the value seen).

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:17 -08:00
Alex Elder
b1750723c9 net: ipa: synchronize NAPI only for suspend
When stopping a channel, gsi_channel_stop() will ensure NAPI
polling is complete when it calls napi_disable().  So there is no
need to call napi_synchronize() in that case.

Move the call to napi_synchronize() out of __gsi_channel_stop()
and into gsi_channel_suspend(), so it's only used where needed.

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:16 -08:00
Alex Elder
63ec9be133 net: ipa: move mutex calls into __gsi_channel_stop()
Move the mutex calls out of gsi_channel_stop_retry() and into
__gsi_channel_stop(), to make the latter more semantically similar
to __gsi_channel_start().

Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:57:13 -08:00
Jakub Kicinski
bfc213f159 Merge branch 'lag-offload-for-ocelot-dsa-switches'
Vladimir Oltean says:

====================
LAG offload for Ocelot DSA switches

This patch series reworks the ocelot switchdev driver such that it could
share the same implementation for LAG offload as the felix DSA driver.

Testing has been done in the following topology:

         +----------------------------------+
         | Board 1         br0              |
         |             +---------+          |
         |            /           \         |
         |            |           |         |
         |            |         bond0       |
         |            |        +-----+      |
         |            |       /       \     |
         |  eno0     swp0    swp1    swp2   |
         +---|--------|-------|-------|-----+
             |        |       |       |
             +--------+       |       |
               Cable          |       |
                         Cable|       |Cable
               Cable          |       |
             +--------+       |       |
             |        |       |       |
         +---|--------|-------|-------|-----+
         |  eno0     swp0    swp1    swp2   |
         |            |       \       /     |
         |            |        +-----+      |
         |            |         bond0       |
         |            |           |         |
         |            \           /         |
         |             +---------+          |
         | Board 2         br0              |
         +----------------------------------+

The same script can be run on both Board 1 and Board 2 to set this up:

ip link del bond0
ip link add bond0 type bond mode balance-xor miimon 1
OR
ip link add bond0 type bond mode 802.3ad
ip link set swp1 down && ip link set swp1 master bond0 && ip link set swp1 up
ip link set swp2 down && ip link set swp2 master bond0 && ip link set swp2 up
ip link del br0
ip link add br0 type bridge
ip link set bond0 master br0
ip link set swp0 master br0

Then traffic can be tested between eno0 of Board 1 and eno0 of Board 2.
====================

Link: https://lore.kernel.org/r/20210205220221.255646-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:53 -08:00
Vladimir Oltean
8fe6832e96 net: dsa: felix: propagate the LAG offload ops towards the ocelot lib
The ocelot switch has been supporting LAG offload since its initial
commit, however felix could not make use of that, due to lack of a LAG
abstraction in DSA. Now that we have that, let's forward DSA's calls
towards the ocelot library, who will deal with setting up the bonding.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:51 -08:00
Vladimir Oltean
a324d3d48f net: dsa: make assisted_learning_on_cpu_port bypass offloaded LAG interfaces
Given the following topology, and focusing only on Box A:

         Box A
         +----------------------------------+
         | Board 1         br0              |
         |             +---------+          |
         |            /           \         |
         |            |           |         |
         |            |         bond0       |
         |            |        +-----+      |
         |192.168.1.1 |       /       \     |
         |  eno0     swp0    swp1    swp2   |
         +---|--------|-------|-------|-----+
             |        |       |       |
             +--------+       |       |
               Cable          |       |
                         Cable|       |Cable
               Cable          |       |
             +--------+       |       |
             |        |       |       |
         +---|--------|-------|-------|-----+
         |  eno0     swp0    swp1    swp2   |
         |192.168.1.2 |       \       /     |
         |            |        +-----+      |
         |            |         bond0       |
         |            |           |         |
         |            \           /         |
         |             +---------+          |
         | Board 2         br0              |
         +----------------------------------+
         Box B

The assisted_learning_on_cpu_port logic will see that swp0 is bridged
with a "foreign interface" (bond0) and will therefore install all
addresses learnt by the software bridge towards bond0 (including the
address of eno0 on Box B) as static addresses towards the CPU port.

But that's not what we want - bond0 is not really a "foreign interface"
but one we can offload including L2 forwarding from/towards it. So we
need to refine our logic for assisted learning such that, whenever we
see an address learnt on a non-DSA interface, we search through the tree
for any port that offloads that non-DSA interface.

Some confusion might arise as to why we search through the whole tree
instead of just the local switch returned by dsa_slave_dev_lower_find.
Or a different angle of the same confusion: why does
dsa_slave_dev_lower_find(br_dev) return a single dp that's under br_dev
instead of the whole list of bridged DSA ports?

To answer the second question, it should be enough to install the static
FDB entry on the CPU port of a single switch in the tree, because
dsa_port_fdb_add uses DSA_NOTIFIER_FDB_ADD which ensures that all other
switches in the tree get notified of that address, and add the entry
themselves using dsa_towards_port().

This should help understand the answer to the first question: the port
returned by dsa_slave_dev_lower_find may not be on the same switch as
the ports that offload the LAG. Nonetheless, if the driver implements
.crosschip_lag_join and .crosschip_bridge_join as mv88e6xxx does, there
still isn't any reason for trapping addresses learnt on the remote LAG
towards the CPU, and we should prevent that.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:51 -08:00
Vladimir Oltean
23ca3b727e net: mscc: ocelot: rebalance LAGs on link up/down events
At present there is an issue when ocelot is offloading a bonding
interface, but one of the links of the physical ports goes down. Traffic
keeps being hashed towards that destination, and of course gets dropped
on egress.

Monitor the netdev notifier events emitted by the bonding driver for
changes in the physical state of lower interfaces, to determine which
ports are active and which ones are no longer.

Then extend ocelot_get_bond_mask to return either the configured bonding
interfaces, or the active ones, depending on a boolean argument. The
code that does rebalancing only needs to do so among the active ports,
whereas the bridge forwarding mask and the logical port IDs still need
to look at the permanently bonded ports.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:51 -08:00
Vladimir Oltean
21357b614d net: mscc: ocelot: rename aggr_count to num_ports_in_lag
It makes it a bit easier to read and understand the code that deals with
balancing the 16 aggregation codes among the ports in a certain LAG.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:51 -08:00
Vladimir Oltean
528d3f190c net: mscc: ocelot: drop the use of the "lags" array
We can now simplify the implementation by always using ocelot_get_bond_mask
to look up the other ports that are offloading the same bonding interface
as us.

In ocelot_set_aggr_pgids, the code had a way to uniquely iterate through
LAGs. We need to achieve the same behavior by marking each LAG as visited,
which we do now by using a temporary 32-bit "visited" bitmask. This is
ok and we do not need dynamic memory allocation, because we know that
this switch architecture will not have more than 32 ports (the PGID port
masks are 32-bit anyway).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
2527f2e88f net: mscc: ocelot: set up logical port IDs centrally
The setup of logical port IDs is done in two places: from the inconclusively
named ocelot_setup_lag and from ocelot_port_lag_leave, a function that
also calls ocelot_setup_lag (which apparently does an incomplete setup
of the LAG).

To improve this situation, we can rename ocelot_setup_lag into
ocelot_setup_logical_port_ids, and drop the "lag" argument. It will now
set up the logical port IDs of all switch ports, which may be just
slightly more inefficient but more maintainable.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
2e9f4afadc net: mscc: ocelot: avoid unneeded "lp" variable in LAG join
The index of the LAG is equal to the logical port ID that all the
physical port members have, which is further equal to the index of the
first physical port that is a member of the LAG.

The code gets a bit carried away with logic like this:

	if (a == b)
		c = a;
	else
		c = b;

which can be simplified, of course, into:

	c = b;

(with a being port, b being lp, c being lag)

This further makes the "lp" variable redundant, since we can use "lag"
everywhere where "lp" (logical port) was used. So instead of a "c = b"
assignment, we can do a complete deletion of b. Only one comment here:

		if (bond_mask) {
			lp = __ffs(bond_mask);
			ocelot->lags[lp] = 0;
		}

lp was clobbered before, because it was used as a temporary variable to
hold the new smallest port ID from the bond. Now that we don't have "lp"
any longer, we'll just avoid the temporary variable and zeroize the
bonding mask directly.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
b80af65969 net: mscc: ocelot: set up the bonding mask in a way that avoids a net_device
Since this code should be called from pure switchdev as well as from
DSA, we must find a way to determine the bonding mask not by looking
directly at the net_device lowers of the bonding interface, since those
could have different private structures.

We keep a pointer to the bonding upper interface, if present, in struct
ocelot_port. Then the bonding mask becomes the bitwise OR of all ports
that have the same bonding upper interface. This adds a duplication of
functionality with the current "lags" array, but the duplication will be
short-lived, since further patches will remove the latter completely.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
f79c20c817 net: mscc: ocelot: use ipv6 in the aggregation code
IPv6 header information is not currently part of the entropy source for
the 4-bit aggregation code used for LAG offload, even though it could be.
The hardware reference manual says about these fields:

ANA::AGGR_CFG.AC_IP6_TCPUDP_PORT_ENA
Use IPv6 TCP/UDP port when calculating aggregation code. Configure
identically for all ports. Recommended value is 1.

ANA::AGGR_CFG.AC_IP6_FLOW_LBL_ENA
Use IPv6 flow label when calculating AC. Configure identically for all
ports. Recommended value is 1.

Integration with the xmit_hash_policy of the bonding interface is TBD.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
583cbbe3ee net: mscc: ocelot: don't refuse bonding interfaces we can't offload
Since switchdev/DSA exposes network interfaces that fulfill many of the
same user space expectations that dedicated NICs do, it makes sense to
not deny bonding interfaces with a bonding policy that we cannot offload,
but instead allow the bonding driver to select the egress interface in
software.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
41e66fa28f net: mscc: ocelot: use a switch-case statement in ocelot_netdevice_event
Make ocelot's net device event handler more streamlined by structuring
it in a similar way with others. The inspiration here was
dsa_slave_netdevice_event.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Vladimir Oltean
662981bbda net: mscc: ocelot: rename ocelot_netdevice_port_event to ocelot_netdevice_changeupper
ocelot_netdevice_port_event treats a single event, NETDEV_CHANGEUPPER.
So we can remove the check for the type of event, and rename the
function to be more suggestive, since there already is a function with a
very similar name of ocelot_netdevice_event.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:51:50 -08:00
Jakub Kicinski
8d9dbce4e8 Merge branch 'automatically-manage-dsa-master-interface-state'
Vladimir Oltean says:

====================
Automatically manage DSA master interface state

This patch series adds code that makes DSA open the master interface
automatically whenever one user interface gets opened, either by the
user, or by various networking subsystems: netconsole, nfsroot.
With that in place, we can remove some of the places in the network
stack where DSA-specific code was sprinkled.
====================

Link: https://lore.kernel.org/r/20210205133713.4172846-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:42:59 -08:00
Vladimir Oltean
46acf7bdbc Revert "net: ipv4: handle DSA enabled master network devices"
This reverts commit 728c02089a.

Since 2015 DSA has gained more integration with the network stack, we
can now have the same functionality without explicitly open-coding for
it:
- It now opens the DSA master netdevice automatically whenever a user
  netdevice is opened.
- The master and switch interfaces are coupled in an upper/lower
  hierarchy using the netdev adjacency lists.

In the nfsroot example below, the interface chosen by autoconfig was
swp3, and every interface except that and the DSA master, eth1, was
brought down afterwards:

[    8.714215] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[    8.978041] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[    9.246134] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[    9.486203] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL)
[    9.512827] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode
[    9.521047] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control off
[    9.530382] device eth1 entered promiscuous mode
[    9.535452] DSA: tree 0 setup
[    9.539777] printk: console [netcon0] enabled
[    9.544504] netconsole: network logging started
[    9.555047] fsl_enetc 0000:00:00.2 eth1: configuring for fixed/internal link mode
[    9.562790] fsl_enetc 0000:00:00.2 eth1: Link is Up - 1Gbps/Full - flow control off
[    9.564661] 8021q: adding VLAN 0 to HW filter on device bond0
[    9.637681] fsl_enetc 0000:00:00.0 eth0: PHY [0000:00:00.0:02] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[    9.655679] fsl_enetc 0000:00:00.0 eth0: configuring for inband/sgmii link mode
[    9.666611] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode
[    9.676216] 8021q: adding VLAN 0 to HW filter on device swp0
[    9.682086] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode
[    9.690700] 8021q: adding VLAN 0 to HW filter on device swp1
[    9.696538] mscc_felix 0000:00:00.5 swp2: configuring for inband/qsgmii link mode
[    9.705131] 8021q: adding VLAN 0 to HW filter on device swp2
[    9.710964] mscc_felix 0000:00:00.5 swp3: configuring for inband/qsgmii link mode
[    9.719548] 8021q: adding VLAN 0 to HW filter on device swp3
[    9.747811] Sending DHCP requests ..
[   12.742899] mscc_felix 0000:00:00.5 swp1: Link is Up - 1Gbps/Full - flow control rx/tx
[   12.743828] mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
[   12.747062] IPv6: ADDRCONF(NETDEV_CHANGE): swp1: link becomes ready
[   12.755216] fsl_enetc 0000:00:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   12.766603] IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready
[   12.783188] mscc_felix 0000:00:00.5 swp2: Link is Up - 1Gbps/Full - flow control rx/tx
[   12.785354] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.799535] IPv6: ADDRCONF(NETDEV_CHANGE): swp2: link becomes ready
[   13.803141] mscc_felix 0000:00:00.5 swp3: Link is Up - 1Gbps/Full - flow control rx/tx
[   13.811646] IPv6: ADDRCONF(NETDEV_CHANGE): swp3: link becomes ready
[   15.452018] ., OK
[   15.470336] IP-Config: Got DHCP answer from 10.0.0.1, my address is 10.0.0.39
[   15.477887] IP-Config: Complete:
[   15.481330]      device=swp3, hwaddr=00:04:9f:05:de:0a, ipaddr=10.0.0.39, mask=255.255.255.0, gw=10.0.0.1
[   15.491846]      host=10.0.0.39, domain=(none), nis-domain=(none)
[   15.498429]      bootserver=10.0.0.1, rootserver=10.0.0.1, rootpath=
[   15.498481]      nameserver0=8.8.8.8
[   15.627542] fsl_enetc 0000:00:00.0 eth0: Link is Down
[   15.690903] mscc_felix 0000:00:00.5 swp0: Link is Down
[   15.745216] mscc_felix 0000:00:00.5 swp1: Link is Down
[   15.800498] mscc_felix 0000:00:00.5 swp2: Link is Down

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:42:57 -08:00
Vladimir Oltean
ea92000d54 Revert "net: Have netpoll bring-up DSA management interface"
This reverts commit 1532b97784.

The above commit is good and it works, however it was meant as a bugfix
for stable kernels and now we have more self-contained ways in DSA to
handle the situation where the DSA master must be brought up.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:42:57 -08:00
Vladimir Oltean
c0a8a9c274 net: dsa: automatically bring user ports down when master goes down
This is not fixing any actual bug that I know of, but having a DSA
interface that is up even when its lower (master) interface is down is
one of those things that just do not sound right.

Yes, DSA checks if the master is up before actually bringing the
user interface up, but nobody prevents bringing the master interface
down immediately afterwards... Then the user ports would attempt
dev_queue_xmit on an interface that is down, and wonder what's wrong.

This patch prevents that from happening. NETDEV_GOING_DOWN is the
notification emitted _before_ the master actually goes down, and we are
protected by the rtnl_mutex, so all is well.

For those of you reading this because you were doing switch testing
such as latency measurements for autonomously forwarded traffic, and you
needed a controlled environment with no extra packets sent by the
network stack, this patch breaks that, because now the user ports go
down too, which may shut down the PHY etc. But please don't do it like
that, just do instead:

tc qdisc add dev eno2 clsact
tc filter add dev eno2 egress flower action drop

Tested with two cascaded DSA switches:
$ ip link set eno2 down
sja1105 spi2.0 sw0p2: Link is Down
mscc_felix 0000:00:00.5 swp0: Link is Down
fsl_enetc 0000:00:00.2 eno2: Link is Down

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:42:57 -08:00
Vladimir Oltean
9d5ef190e5 net: dsa: automatically bring up DSA master when opening user port
DSA wants the master interface to be open before the user port is due to
historical reasons. The promiscuity of interfaces that are down used to
have issues, as referenced Lennert Buytenhek in commit df02c6ff2e
("dsa: fix master interface allmulti/promisc handling").

The bugfix mentioned there, commit b6c40d68ff ("net: only invoke
dev->change_rx_flags when device is UP"), was basically a "don't do
that" approach to working around the promiscuity while down issue.

Further work done by Vlad Yasevich in commit d2615bf450 ("net: core:
Always propagate flag changes to interfaces") has resolved the
underlying issue, and it is strictly up to the DSA and 8021q drivers
now, it is no longer mandated by the networking core that the master
interface must be up when changing its promiscuity.

From DSA's point of view, deciding to error out in dsa_slave_open
because the master isn't up is
(a) a bad user experience and
(b) knocking at an open door.
Even if there still was an issue with promiscuity while down, DSA could
still just open the master and avoid it.

Doing it this way has the additional benefit that user space can now
remove DSA-specific workarounds, like systemd-networkd with BindCarrier:
https://github.com/systemd/systemd/issues/7478

And we can finally remove one of the 2 bullets in the "Common pitfalls
using DSA setups" chapter.

Tested with two cascaded DSA switches:

$ ip link set sw0p2 up
fsl_enetc 0000:00:00.2 eno2: configuring for fixed/internal link mode
fsl_enetc 0000:00:00.2 eno2: Link is Up - 1Gbps/Full - flow control rx/tx
mscc_felix 0000:00:00.5 swp0: configuring for fixed/sgmii link mode
mscc_felix 0000:00:00.5 swp0: Link is Up - 1Gbps/Full - flow control off
8021q: adding VLAN 0 to HW filter on device swp0
sja1105 spi2.0 sw0p2: configuring for phy/rgmii-id link mode
IPv6: ADDRCONF(NETDEV_CHANGE): eno2: link becomes ready
IPv6: ADDRCONF(NETDEV_CHANGE): swp0: link becomes ready

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:42:57 -08:00
Linus Torvalds
964d069f93 SCSI fixes on 20210206
One fix in drivers (lpfc) that stops an oops on resource exhaustion.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYB7UQCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSIHAP4yPKi2
 tTlSeWRlnAwaXsRNjmzgTn1jg9nwYpmCG+onUQEA20dQF0kfzWO3KaWUrPu175HC
 TL/PRpx0wPGxXafBhqM=
 =eD69
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
 "One fix in drivers (lpfc) that stops an oops on resource exhaustion"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Fix EEH encountering oops with NVMe traffic
2021-02-06 14:42:52 -08:00
Linus Torvalds
eec7918121 block-5.11-2021-02-05
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmAd0I4QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpvSxEAC9pqegYUaYngwEJ7lIACYzs7V6SThxpY7L
 awpNuABkhE6Et34haLmmCR0E4ZIFcma2pLAsAxIWK1z7ZPZ+YNkIGlc0JcAvg5kr
 jrlljs2BMwutM1OvMmk7E0UDKNDQwAdUgM8MV4X+KfDDf4NHcG/iAIXESAZtnbzV
 TIOBfv1XXvAgSFPoYpgSJsEg5v16oXW/9TGqCV6645paPClaF7D6xD1uRbrIfx3Z
 zXC4cUhA7w9NFwNLffTVx11YSr0FjA5L576ZBH3B/VyqYf6gzEpuhXWpTwRzJYjT
 b2jcf9wd97CL7EjLd0RJnfJ2awrivOLQRt6TOABFbJjxrcXS4I7YepVkndEgMerb
 v/D7YuPuqOX4cYptb0x+Hwo7bnjhDM6fTd/8UMmycSqn6P5ZtZFhAEqj3A5Hag2+
 jmsfp6cpvyGiM8mioZ2HOROyqVLcd1NdniLWzc+llz4gGLj1ldTdlLVw76/N5Xum
 E0NMhIOKpjK8jtA2Ct76aMFt7F8Rqe43c6ojHkbapuFN8MFvSr4nEzJGcSOyP/dD
 n5RXJsothqKNUrnA33tMCJFWYdn6hLw3HgM1wCilCDJ//w2VdB0TSYYPw6SzEB6/
 +hsfV1i9iNnHJkDJgWdMVASdQOe8IH9ObvKoqE+6fCeRYtiUnTCHNm+MmG8UgTch
 iVZAMmZiWA==
 =fKCL
 -----END PGP SIGNATURE-----

Merge tag 'block-5.11-2021-02-05' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few small regression fixes:

   - NVMe pull request from Christoph:
       - more quirks for buggy devices (Thorsten Leemhuis, Claus Stovgaard)
       - update the email address for Keith (Keith Busch)
       - fix an out of bounds access in nvmet-tcp (Sagi Grimberg)

   - Regression fix for BFQ shallow depth calculations introduced in
     this merge window (Lin)"

* tag 'block-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
  nvmet-tcp: fix out-of-bounds access when receiving multiple h2cdata PDUs
  bfq-iosched: Revert "bfq: Fix computation of shallow depth"
  update the email address for Keith Bush
  nvme-pci: ignore the subsysem NQN on Phison E16
  nvme-pci: avoid the deepest sleep state on Kingston A2000 SSDs
2021-02-06 14:40:27 -08:00
Jakub Kicinski
78936acc6e Merge branch 'net-hns3-updates-for-next'
Huazhong Tan says:

====================
net: hns3: updates for -next

This series adds some code optimizations and compatibility
handlings for the HNS3 ethernet driver.

change log:
V2: refactor #2 as Jukub Kicinski reported and remove the part
    about RSS size which will not be different in different hw.
    updates netdev->max_mtu as well in #4 reported by Jakub Kicinski.

previous version:
V1: https://patchwork.kernel.org/project/netdevbpf/cover/1612269593-18691-1-git-send-email-tanhuazhong@huawei.com/
====================

Link: https://lore.kernel.org/r/1612513969-9278-1-git-send-email-tanhuazhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:37:42 -08:00
Linus Torvalds
860b45dae9 io_uring-5.11-2021-02-05
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmAd0KoQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpkPvD/kBm/uxstfomiryxDUeALadUZTIxkIsP8Zx
 6IijgJXvynDJutz8gjA7aynK8j4YyrktiuS4C3ctxU+cyt3/M2ZFnnQpx88gvfK5
 5OANmB1iMwUyu4GkZHsmWPo4aqv6mvE+QKKYMu8m++6/ZA4/458jx0AsjP1XSKth
 VYeRLElPTH+JcoxSgn9DwEJiGGViN26rpiy3NG2fNt/dXNFgwD8BevjXAYdQNscs
 Xrox2p2TLoMnCVWoDXg3XmMwZphigibjyWWgEEZp3LGrHU49HNUIL7GXv5No1nAO
 okxmVL3zropEgCXqxeJ5eGG+Ve1JCuvMxgl34dVN3qoN6AhfU7BXbGFeoKYSQIIW
 pgF2Qv0+KGEnRD7HOSLdygnl2gLP9ID+Xx214rKlnRE3bFkg5lwZxg4Pfos1Sn5N
 PGLqfvhZ8/Qb5BObW4qMobz3yG5ozrHJ8+EeccgNJuOGQtw3yHxp5NAotzTp97mA
 5RCw6f9HVlTcgRnDOdYskeUfb4N1i4Ps1/0RCHGWlxOpFsVkClWeDp1DTA+/gW5l
 +7vREo3vpDfNW68PgWwp5y2RyfocOgRS6pRX0gDhtsLx6MJl1YKGbU0qbamdjofm
 bOygR+Ce4rYiG+kFHkkJcWG9rjcomy2BXCHXoylx65FimYmrFuQzdxpRO2MrWpzJ
 4zQcegXM1A==
 =sGoQ
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Two small fixes that should go into 5.11:

   - task_work resource drop fix (Pavel)

   - identity COW fix (Xiaoguang)"

* tag 'io_uring-5.11-2021-02-05' of git://git.kernel.dk/linux-block:
  io_uring: drop mm/files between task_work_submit
  io_uring: don't modify identity's files uncess identity is cowed
2021-02-06 14:37:24 -08:00
Guangbin Huang
3f094bd11a net: hns3: replace macro of max qset number with specification
The max qset number is a fixed value now and it is defined by a macro.
In order to support other value in different kinds of device, it is
better to use specification queried from firmware to replace macro.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:36:05 -08:00
Guangbin Huang
2783e77b8d net: hns3: debugfs add max tm rate specification print
In order to add a method to check the specification of max tm rate
for debugging, function hns3_dbg_dev_specs() adds this value print.

Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-06 14:36:05 -08:00