The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: 5faf6e1f58 ("i2c: emev2: add driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The driver neglects to check the result of platform_get_irq()'s call and
blithely passes the negative error codes to devm_request_irq() (which
takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding
an original error code. Stop calling devm_request_irq() with invalid
IRQ #s.
Fixes: df8eb5691c ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
pm_runtime_get_sync() will increment the PM reference count even on
failure. Forgetting to put the reference again will result in a leak.
Replace it with pm_runtime_resume_and_get() to keep the usage counter
balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Ye Weihua <yeweihua4@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in xiic_xfer and xiic_i2c_remove.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 10b17004a7 ("i2c: xiic: Fix the clocking across bind unbind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in these stm32f7_i2c_xx serious functions.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: ea6dd25dee ("i2c: stm32f7: add PM_SLEEP suspend/resume support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in sprd_i2c_master_xfer() and sprd_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 8b9ec07198 ("i2c: Add Spreadtrum I2C controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in omap_i2c_probe() and omap_i2c_remove().
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here. I Replace it with pm_runtime_resume_and_get
to keep usage counter balanced.
What's more, error path 'err_free_mem' seems not like a proper
name any more. So I change the name to err_disable_pm and move
pm_runtime_disable below, for pm_runtime of 'pdev->dev' should
be disabled when pm_runtime_resume_and_get fails.
Fixes: 3b0fb97c8d ("I2C: OMAP: Handle error check for pm runtime")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In i2c_imx_xfer() and i2c_imx_remove(), the pm reference count
is not expected to be incremented on return.
However, pm_runtime_get_sync will increment pm reference count
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 3a5ee18d2a ("i2c: imx: implement master_xfer_atomic callback")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in lpi2c_imx_master_enable.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 13d6eb20fc ("i2c: imx-lpi2c: add runtime pm support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in functions img_i2c_xfer and img_i2c_init.
However, pm_runtime_get_sync will increment the PM reference
count even failed. Forgetting to putting operation will result
in a reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 93222bd9b9 ("i2c: img-scb: Add runtime PM")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The PM reference count is not expected to be incremented on
return in functions cdns_i2c_master_xfer and cdns_reg_slave.
However, pm_runtime_get_sync will increment pm usage counter
even failed. Forgetting to putting operation will result in a
reference leak here.
Replace it with pm_runtime_resume_and_get to keep usage
counter balanced.
Fixes: 7fa32329ca ("i2c: cadence: Move to sensible power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
During the handling of CAN bus errors, a CAN error SKB is allocated
using alloc_can_err_skb(). Even if the allocation of the SKB fails,
the function continues in order to do the stats handling.
All access to the can_frame pointer (cf) should be guarded by an if
statement:
if (cf)
However, the increment of the rx_bytes stats:
netdev->stats.rx_bytes += cf->can_dlc;
dereferences the cf pointer and was not guarded by an if condition
leading to a NULL pointer dereference if the can_err_skb() function
failed.
Replacing the cf->can_dlc by the macro CAN_ERR_DLC (which is the
length of any CAN error frames) solves this NULL pointer dereference.
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/r/20210413114242.2760-1-mailhol.vincent@wanadoo.fr
Reported-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When PINCTRL_MSM is enabled, and GPIOLIB is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for GPIOLIB_IRQCHIP
Depends on [n]: GPIOLIB [=n]
Selected by [y]:
- PINCTRL_MSM [=y] && PINCTRL [=y] && (ARCH_QCOM || COMPILE_TEST [=y])
This is because PINCTRL_MSM selects GPIOLIB_IRQCHIP,
without selecting or depending on GPIOLIB, despite
GPIOLIB_IRQCHIP depending on GPIOLIB. Having PINCTRL_MSM
select GPIOLIB will cause a recursive dependency error.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210414025138.480085-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Fix pin numbering per community in Intel Lewisburg driver
The following is an automated git shortlog grouped by driver:
lewisburg:
- Update number of pins in community
-----BEGIN PGP SIGNATURE-----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=vMXg
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.12-4' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.12-4
* Fix pin numbering per community in Intel Lewisburg driver
The following is an automated git shortlog grouped by driver:
lewisburg:
- Update number of pins in community
This helper is the same as the sample code in the NCURSES HOWTO [1],
but it is over-engineering to be used for nconf.
I do not see any good reason to use the 'float' type just for the
division by 2.
All the call-sites pass a non-NULL pointer to the first argument,
so 'if (win == NULL) win = stdscr;' is dead code.
'if (startx != 0) x = startx;' is dead code because 'x' will be
overridden some lines below, by 'x = startx + (int)temp;'.
All the call-sites pass a non-zero value to the second argument,
so 'if (starty != 0)' is always true.
getyx(win, y, x) is also dead-code because both 'y' and 'x' are
overridden.
All the call-sites pass 0 to the third parameter, so 'startx' can
be removed.
All the call-sites pass a non-zero value to the fourth parameter,
so 'if (width == 0) width = 80;' is dead code.
The window will be refreshed later, so there is no need to call
refresh() in this function.
Change the type of the last parameter from 'chtype' to 'int' to be
aligned with the prototype, 'int wattrset(WINDOW *win, int attrs);'
I also slightly cleaned up the indentation style.
[1]: https://tldp.org/HOWTO/NCURSES-Programming-HOWTO/color.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This attribute is not used because it will be overridden some lines
below:
wattrset(main_window, attr_main_menu_box);
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The current attributes setup code is strange; the array attribute[]
is set to values outside the range of the attribute_t enum.
At least,
attributes_t attributes[ATTR_MAX+1] = {0};
... should be
int attribute[ATTR_MAX+1] = {0};
Also, there is no need to hard-code the color-pair numbers in
attributes_t.
The current code is messy. Rewrite it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The rootmenu always has a prompt even if the 'mainmenu' statement is
missing in the top Kconfig file.
conf_parse() calls menu_add_prompt(P_MENU, "Main menu", NULL) in this
case.
So, every 'menu' has a prompt.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 10175ba65f ("nconfig: Silence unused return values
from wattrset").
With this patch applied, recent GCC versions can cleanly build nconf
without "value computed is not used" warnings.
The wattrset() used to be implemented as a macro, like this:
#define wattrset(win,at) \
(NCURSES_OK_ADDR(win) \
? ((win)->_attrs = NCURSES_CAST(attr_t, at), \
OK) \
: ERR)
The GCC bugzilla [1] reported a false-positive -Wunused-value warning
in a similar test case. It was fixed by GCC 4.4.1.
Let's revert that commit, and see if somebody will claim the issue.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=39889
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The lower 8-bit of attributes should be 0, but this code wrongly
sets it to NORMAL (=1). The correct one is A_NORMAL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
snprintf() always terminates the destination buffer with '\0' even if
the buffer is not long enough. (In this case, the last element of the
buffer becomes '\0'.)
The explicit termination is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When the .config file is missing, 'make config', 'make menuconfig', etc.
uses a file listed in DEFCONFIG_LIST, if found, as base configuration.
Ususally, /boot/config-$(uname -r) exists, and is used as default.
However, when you are cross-compiling the kernel, it does not make
sense to use /boot/config-* on the build host. It should default to
arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
UML previously did not use DEFCONFIG_LIST at all, but it should be
able to use arch/um/configs/$(KBUILD_DEFCONFIG) as a base config file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
sym_change_count has no good reason to be 'int' type.
sym_set_change_count() compares the old and new values after casting
both of them to (bool). I do not see any practical diffrence between
sym_set_change_count(1) and sym_add_change_count(1).
Use the boolean flag, conf_changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The following code in get_mext_match():
index = (index + items_num) % items_num;
... makes the program crash when items_num is zero (that is, the menu
is empty).
A menu can be empty when all the options in it are hidden by unmet
'depends on'.
For example,
menu "This menu will be empty"
config FOO
bool "foo"
depends on BROKEN
endmenu
If you visit this menu and press a '/' key and then another key, nconf
crashes with:
Floating point exception (core dumped)
When the number of items is zero, it does not make sense to search in
the menu. In this case, current_item() returns NULL, and item_index()
ERR, but get_mext_match() does not check it.
Let's make get_mext_match() just return if the menu is empty.
While I am here, change items_num from 'int' to 'unsigned int' because
it should never become negative.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
fixed the following coccicheck:
./scripts/kconfig/confdata.c:36:9-10: WARNING: return of 0/1 in function
'is_dir' with return type bool
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now "modules" is the only member of the "option" property.
Remove "option", and move "modules" to the top level property.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
allnoconfig_y is an ugly hack that sets a symbol to 'y' by allnoconfig.
allnoconfig does not mean a minimal set of CONFIG options because a
bunch of prompts are hidden by 'if EMBEDDED' or 'if EXPERT', but I do
not like to hack Kconfig this way.
Use the pre-existing feature, KCONFIG_ALLCONFIG, to provide a one
liner config fragment. CONFIG_EMBEDDED=y is still forced when
allnoconfig is invoked as a part of tinyconfig.
No change in the .config file produced by 'make tinyconfig'.
The output of 'make allnoconfig' will be changed; we will get
CONFIG_EMBEDDED=n because allnoconfig literally sets all symbols to n.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This is a partial revert of commit 2a86f66121 ("kbuild: use
KBUILD_DEFCONFIG as the fallback for DEFCONFIG_LIST").
Now that the reference to $(DEFCONFIG_LIST) was removed from
init/Kconfig, the default KBUILD_DEFCONFIG can go back home.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
"defconfig_list" is a weird option that defines a static symbol that
declares the list of base config files in case the .config does not
exist yet.
This is quite different from other normal symbols; we just abused the
"string" type and the "default" properties to list out the input files.
They must be fixed values since these are searched for and loaded in
the parse stage.
It is an ugly hack, and should not exist in the first place. Providing
this feature as an environment variable is a saner approach.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Those are already provided by linux/io.h as stubs.
The conflict remains invisible until someone would pull linux/io.h into
memtype.c. This fixes a build error when this file is used outside of
the kernel tree.
[ bp: Massage commit message. ]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/a9351615-7a0d-9d47-af65-d9e2fffe8192@siemens.com
This function is only used in conf.c. Move it there together with the
randomize_choice_values() helper.
Define 'enum conf_def_mode' locally in conf.c as well.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit
a799c2bd29 ("x86/setup: Consolidate early memory reservations")
moved reservation of the memory inaccessible by Sandy Bride integrated
graphics very early, and, as a result, on systems with such devices
the first 1M was reserved by trim_snb_memory() which prevented the
allocation of the real mode trampoline and made the boot hang very
early.
Since the purpose of trim_snb_memory() is to prevent problematic pages
ever reaching the graphics device, it is safe to reserve these pages
after memblock allocations are possible.
Move trim_snb_memory() later in boot so that it will be called after
reserve_real_mode() and make comments describing trim_snb_memory()
operation more elaborate.
[ bp: Massage a bit. ]
Fixes: a799c2bd29 ("x86/setup: Consolidate early memory reservations")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Hugh Dickins <hughd@google.com>
Link: https://lkml.kernel.org/r/f67d3e03-af90-f790-baf4-8d412fe055af@infradead.org
Add IPA-related nodes and definitions to "sdx55.dtsi". The SMP2P
nodes (ipa_smp2p_out and ipa_smp2p_in) are already present.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210409155251.955632-1-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Not all platforms are able to allocate CMA size of 256MB. One such
platform is SDX55. Hence, use the standard 64MB size for CMA.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-8-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable CPUFreq and CPUFreq DT drivers to carry out CPU Frequency scaling
duties on platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Enable Qualcomm APCS IPC mailbox driver for IPC communication between
application processor and other masters in platforms like SDX55.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170930.91834-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Telit FN980 TLB is the development platform based on the Qualcomm SDX55
chipset. This basic support includes support for debug serial, NAND
flash, BAM DMA, USB and regulators support.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210408170457.91409-12-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>